You are on page 1of 2

Equipment - Component - 526106243 Site/Vessel Name - Code Customer

Power Generation 526106243 - Engine - Diesel Engine PLTD Kampung Aie - 74446 PLTD Kampung Aie
Diesel Stationary

Manufacturer - Model LubeAnalyst Code Registered Lubricant


MTU Friedrichshafen GmbH - 12V4000 G23 11986909/EDS01 Shell - Rimula R4 X 15W-40

Diagnosis Customer Comments


Slightly high levels of Sodium noticed. All other parameters are found Maintenance:
acceptable. Slightly high level of Sodium possible due to coolant leak, but water
Attention evaporated from the lube oil. Please check cooler system for any leakages and
rectify if necessary. There is no abnormal wear noticed. The oil is fit for further
use under close monitoring of future sample results. Please submit a sample
after necessary corrective action as soon as possible to check and monitor the
trend. We will review the results in the next sample.

Sample Information
Sample Number 100736013 100736009 100736006

Sample Condition

Sample Date 25/Oct/2023 02/Sep/2023 07/Aug/2023


Sample Received 29/Nov/2023 08/Nov/2023 06/Oct/2023
Sample Completed 03/Dec/2023 12/Nov/2023 12/Oct/2023
Lubricant in use Rimula R4 X 15W-40 Rimula R4 X 15W-40 Rimula R4 X 15W-40
Equipment Life 11730 (Hours) 10738 (Hours) 9734 (Hours)
Lubricant Life 500 (Hours) 500 (Hours) 500 (Hours)
Top-up Volume

Physical Characteristics
Viscosity 100°C cSt 12.66 13.61 10.84
Flash Point (Pass/Fail) °C Pass Pass Pass
TBN (D 2896) mg KOH/g 8.42 8.01 8.01
Wear
Iron (Fe) ppm 6 9 15
Chromium (Cr) ppm 1 1 0
Tin (Sn) ppm 2 0 1
Lead (Pb) ppm 0 0 4
Copper (Cu) ppm 5 23 90
Nickel (Ni) ppm 2 1 1
Aluminium (Al) ppm 1 1 2
Vanadium (V) ppm 0 0 0
Silver (Ag) ppm 0 0 0
Titanium (Ti) ppm 0 0 0
Contamination
Water Content (Aquatest) % 0.11 0.28 0.12
Index of Contamination (IC) % 0.4 0.4 0.6
Merit of Dispersancy (MD) 100 100 100
Demerit Point (DP) 0.0 0.0 0.0
Sodium (Na) ppm 32 47 183
Silicon (Si) ppm 11 11 28
Potassium (K) ppm 107 61 143
Additives
Calcium (Ca) ppm 3927 3809 3464
Zinc (Zn) ppm 1134 1137 1107
Phosphorus (P) ppm 939 971 965
Barium (Ba) ppm 0 0 0
Molybdenum (Mo) ppm 48 46 37
Magnesium (Mg) ppm 12 30 104
Boron (B) ppm 259 283 212

All advice is given in good faith and assumes that the sample fully represents the indicated oil charge. Any recommended values refer to normal ranges. For all queries, please remember to quote your
Sample Number(s). Once printed, this document is un-controlled. For current versions, authorised users should refer to Shell LubeAnalyst online at www.lubeanalyst.shell.com. This report is provided
subject to the general Shell LubeAnalyst Terms and Conditions available at www.lubeanalyst.shell.com.

01 / 02 PLTD Kampung Aie - 74446


Graphs

Physical Characteristics Wear


8.5 108
14
8.4 90

mg KOH/g
8.4 72
13

ppm
8.3 54
cSt

12 8.2 36
8.1 18
11 8 0
06/08/23
14/08/23
22/08/23
30/08/23
07/09/23
15/09/23
23/09/23
01/10/23
09/10/23
17/10/23
25/10/23

06/08/23

14/08/23

22/08/23

30/08/23

07/09/23

15/09/23

23/09/23

01/10/23

09/10/23

17/10/23

25/10/23
Date drawn Date drawn

Viscosity 100°C (cSt) TBN (D 2896) (mg KOH/g) Iron (Fe) (ppm) Chromium (Cr) (ppm) Tin (Sn) (ppm)
Lead (Pb) (ppm) Copper (Cu) (ppm) Aluminium (Al) (ppm)
Silver (Ag) (ppm)

Contamination Additives
204 0.7 4710
170 0.6 3925
136 0.5 3140
ppm

ppm

2355
%

102 0.4
68 0.3 1570
34 0.2 785
0
06/08/23

14/08/23

22/08/23

30/08/23

07/09/23

15/09/23

23/09/23

01/10/23

09/10/23

17/10/23

25/10/23
06/08/23
14/08/23
22/08/23
30/08/23
07/09/23
15/09/23
23/09/23
01/10/23
09/10/23
17/10/23
25/10/23

Date drawn Date drawn

Sodium (Na) (ppm) Silicon (Si) (ppm) Calcium (Ca) (ppm) Zinc (Zn) (ppm) Phosphorus (P) (ppm)
Water Content (Aquatest) (%) Index of Contamination (IC) (%) Barium (Ba) (ppm) Molybdenum (Mo) (ppm)
Magnesium (Mg) (ppm) Boron (B) (ppm)

All advice is given in good faith and assumes that the sample fully represents the indicated oil charge. Any recommended values refer to normal ranges. For all queries, please remember to quote your
Sample Number(s). Once printed, this document is un-controlled. For current versions, authorised users should refer to Shell LubeAnalyst online at www.lubeanalyst.shell.com. This report is provided
subject to the general Shell LubeAnalyst Terms and Conditions available at www.lubeanalyst.shell.com.

02 / 02 PLTD Kampung Aie - 74446

You might also like