Professional Documents
Culture Documents
Normal Power+Generation 25399351 Engine+Diesel+Stationary 30 10 2023
Normal Power+Generation 25399351 Engine+Diesel+Stationary 30 10 2023
Power Generation 25399351 - Engine - Diesel Engine PLTD Kampung Aie - 74446 PLTD Kampung Aie
Diesel Stationary
Sample Information
Sample Number 100736012 100736008 100736004 100736001
Sample Condition
Physical Characteristics
Viscosity 100°C cSt 14.26 13.91 15.37 13.93
Flash Point (Pass/Fail) °C Pass Pass Pass Pass
TBN (D 2896) mg KOH/g 9.30 7.42 7.79 8.78
Wear
Iron (Fe) ppm 4 8 10 16
Chromium (Cr) ppm 1 1 2 2
Tin (Sn) ppm 1 0 2 2
Lead (Pb) ppm 7 15 10 16
Copper (Cu) ppm 1 1 2 4
Nickel (Ni) ppm 0 0 1 1
Aluminium (Al) ppm 1 1 1 2
Vanadium (V) ppm 0 0 0 0
Silver (Ag) ppm 0 0 0 0
Titanium (Ti) ppm 0 0 0 0
Contamination
Water Content (Aquatest) % <0.05 0.27 <0.05 0.31
Index of Contamination (IC) % 0.1 0.2 0.2 0.2
Merit of Dispersancy (MD) 99 100 100 100
Demerit Point (DP) 0.1 0.0 0.0 0.0
Sodium (Na) ppm 5 4 6 3
Silicon (Si) ppm 10 7 8 9
Potassium (K) ppm 0 1 1 0
Additives
Calcium (Ca) ppm 3526 4033 3812 4672
Zinc (Zn) ppm 1049 1234 1176 1635
Phosphorus (P) ppm 943 1080 1024 1147
Barium (Ba) ppm 0 0 0 0
Molybdenum (Mo) ppm 43 50 45 58
Magnesium (Mg) ppm 26 13 14 121
Boron (B) ppm 376 316 303 387
All advice is given in good faith and assumes that the sample fully represents the indicated oil charge. Any recommended values refer to normal ranges. For all queries, please remember to quote your
Sample Number(s). Once printed, this document is un-controlled. For current versions, authorised users should refer to Shell LubeAnalyst online at www.lubeanalyst.shell.com. This report is provided
subject to the general Shell LubeAnalyst Terms and Conditions available at www.lubeanalyst.shell.com.
mg KOH/g
9 12
ppm
14.9 8.6 9
cSt
14.6 8.3 6
14.3 7.9 3
14 7.5 0
01/07/23
13/07/23
25/07/23
06/08/23
18/08/23
30/08/23
11/09/23
23/09/23
05/10/23
17/10/23
29/10/23
01/07/23
13/07/23
25/07/23
06/08/23
18/08/23
30/08/23
11/09/23
23/09/23
05/10/23
17/10/23
29/10/23
Date drawn Date drawn
Viscosity 100°C (cSt) TBN (D 2896) (mg KOH/g) Iron (Fe) (ppm) Chromium (Cr) (ppm) Tin (Sn) (ppm)
Lead (Pb) (ppm) Copper (Cu) (ppm) Aluminium (Al) (ppm)
Silver (Ag) (ppm)
Contamination Additives
11 0.34 5604
10 4670
9 0.29
8 0.25 3736
ppm
ppm
%
7 0.21 2802
6 1868
5 0.17
4 0.13 934
3 0
01/07/23
13/07/23
25/07/23
06/08/23
18/08/23
30/08/23
11/09/23
23/09/23
05/10/23
17/10/23
29/10/23
01/07/23
13/07/23
25/07/23
06/08/23
18/08/23
30/08/23
11/09/23
23/09/23
05/10/23
17/10/23
29/10/23
Date drawn Date drawn
Sodium (Na) (ppm) Silicon (Si) (ppm) Calcium (Ca) (ppm) Zinc (Zn) (ppm) Phosphorus (P) (ppm)
Water Content (Aquatest) (%) Index of Contamination (IC) (%) Barium (Ba) (ppm) Molybdenum (Mo) (ppm)
Magnesium (Mg) (ppm) Boron (B) (ppm)
All advice is given in good faith and assumes that the sample fully represents the indicated oil charge. Any recommended values refer to normal ranges. For all queries, please remember to quote your
Sample Number(s). Once printed, this document is un-controlled. For current versions, authorised users should refer to Shell LubeAnalyst online at www.lubeanalyst.shell.com. This report is provided
subject to the general Shell LubeAnalyst Terms and Conditions available at www.lubeanalyst.shell.com.