Professional Documents
Culture Documents
DPC Paper 3
DPC Paper 3
DIPLOMA IN PACKAGING
(Through Correspondence)
26th Batch (2021-2022)
PAPER-III
Date: 09.06.2022 Time: 10.00 a.m – 1.00 p.m. Total Marks: 100
INSTRUCTIONS:
e. What are Cushioning Materials, Explain its function, Selection & Properties of cushioning
materials.
a. What is collotype?
Page 1|3
INDIAN INSTITUTE OF PACKAGING
DIPLOMA IN PACKAGING
(Through Correspondence)
26th Batch (2021-2022)
PAPER-III
Date: 09.06.2022 Time: 10.00 a.m – 1.00 p.m. Total Marks: 100
Q.1 Fill in the blanks by choosing the correct answer (Mark 1 X 10 = 10)
a) The printing plates are classified according to the ______________ of printing plate.
b) Printing is a method of an image on any suitable surface by a possible means
c) Collotype is also termed as .
d) Printing Ink consist of pigment in different vehicle phase.
e) Viscosity is the property of ______________
f) Desiccants are basically __________________absorbing materials.
g) Blister pack is a combined construction of heat formed ______________ bubble.
h) Unit of surface tension is ____________.
i) _____________ are colorants additives in a medium
j) Good quality strapping have some degree of _______________ resistance.
Q.2 State whether the following statement is True or False & Re-write statement & answer
(Mark 1 X 10 = 10)
a) In Direct printing, the printed material is brought into direct contact with plate so the ink is directly
applied to the printing medium. (True/False)
b) In dry off-set printing the ink impression from a metal type form is transferred onto cylinder cover
with a rubber blanket. (True/False)
c) Using color in packaging it should be in harmony with the kind of product it contains. (True/False)
d) Color fastness is not mandatory while choosing color for package. (True/False)
e) Liquid inks do not contain considerable amount of volatile solvents. (True/False)
Page 2|3
INDIAN INSTITUTE OF PACKAGING
DIPLOMA IN PACKAGING
(Through Correspondence)
26th Batch (2021-2022)
PAPER-III
Date: 09.06.2022 Time: 10.00 a.m – 1.00 p.m. Total Marks: 100
f) The prime function of reinforcement on package is to enhance rigidity of the package. (True/False)
g) Sand Blasting is one of the methods of surface preparation. (True/False)
h) The cohesive strength of adhesive determines its compatibility with a particular surface.
(True/False)
i) Marine containers are classified in various group according to their size & usage. (True/False)
j) Polyvinyl chloride material can not be used in Blister Packaging. (True/False)
a. Printing Ink.
b. Flexographic.
c. Lithography.
d. Surface tension.
f. Corrosion.
g. Rain Test.
h. Containerization.
*********
Page 3|3