Professional Documents
Culture Documents
Engine Stalls at Low RPM (TST)
Engine Stalls at Low RPM (TST)
Previous Screen
Welcome: j065btl
Product: INDUSTRIAL ENGINE
Model: C13 INDUSTRIAL ENGINE RRA01544
Configuration: C13 Industrial Engine RRA00001-UP
Troubleshooting
C11, C13, C15, and C18 Industrial Engines
Media Number -M0073474-05 Publication Date -01.08.2017 Date Updated -10.08.2017
i06783082
Probable Causes
Unit injectors
Fuel supply
Air supply
Engine idle
Accessory equipment
Recommended Actions
Table 1
Troubleshooting Test Steps Values Results
B. Check for correct installation of the J300/P300 connectors for the Proceed to Test Step 2.
unit injectors. Refer to the diagnostic functional test Troubleshooting,
"Electrical Connectors - Inspect". Result: The J300/P300
connectors have been
installed correctly.
Result: The
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/s… 1/3
11/6/2017 C13 Industrial Engine RRA00001-UP(SEBP4130 - 65) - Documentation
C. Check the fuel tank for foreign objects which may block the fuel Result: The fuel tank
supply. is NOT OK.
Fuel
Supply
Note: A sight glass in the low-pressure supply line is helpful in Repair: Repair the
diagnosing air in the fuel. Refer to Systems Operation/Testing and blockage in the fuel
Adjusting. tank.
D. Cold weather adversely affects the characteristics of the fuel. Refer Result: The fuel
to the Operation and Maintenance Manual. pressure is OK.
E. Check the fuel pressure after the fuel filter while the engine is being Proceed to Test Step 3.
cranked. For the correct pressure values, refer to the Systems
Operation/Testing and Adjusting manual. Result: The fuel
pressure is NOT OK.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/s… 2/3
11/6/2017 C13 Industrial Engine RRA00001-UP(SEBP4130 - 65) - Documentation
A. Check for restrictions in the air inlet system. Refer to Systems system inlet system.
Operation/Testing and Adjusting.
Proceed to Test Step 4.
Result: An engine
accessory is creating
5. Engine Accessories
Engine an excessive load.
accessories
A. Inspect any engine accessories and the transmission (if applicable).
Repair: Repair the
engine accessory.
If the problem is not resolved, contact your Cat dealer Technical Communicator (TC). For further assistance,
your TC can confer with the Dealer Solutions Network (DSN).
Copyright 1993 - 2017 Caterpillar Inc. Mon Nov 06 2017 12:05:19 GMT+0600 (Bangladesh Standard Time)
All Rights Reserved.
j065btl
Private Network For SIS Licensees.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/s… 3/3