Professional Documents
Culture Documents
Atta4. IR 010800 20210628 Pipe
Atta4. IR 010800 20210628 Pipe
0020 R X Raw Material Test Certificates and Report Per ASTM A-999 (including micrographs)
0030 R X Welding Procedure Specification (WPS) , Procedure Refer to P.O., SAEP-352, 01-SAMSS-046, ASME Section IX as
Qualification Records (PQR) and welding repair procedure applicable.
0040 R X Raw Material Verification Per paragraph 8.2 and 8.3 of 01-SAMSS-046 and applicable
ASTM std.
0060 R X NDT Personnel and Procedure Verify valid personnel certification and procedures.
0020
0010
***
W X
In process inspection & test requirement
Workmanship, Components, and Dimensions
Specification Details / Notes:
0030 W R X Chemical Composition Per 01-SAMSS-046 and applicable ASTM std. (dual
certification, carbon content)
IR010800 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 06/28/2021 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 01/12/2021 IR010800 2 of 3
(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE
(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0090 W R X Metallographic Examination Per 01-SAMSS-046 and applicable ASTM std. (ferrite content /
microstructure analysis)
0130 W X Non Destructive Testing Per 01-SAMSS-046 and hydrostatic testing per ASTM A-999.
Also, per applicable ASTM Electrical Test or RT.
0140 R X Pickling and Passivation Per 01-SAMSS-046 and applicable ASTM std.
0030
0010
***
H R X
Final inspection & test requirements
Visual and Dimensional Inspection
Specification Details / Notes:
As per 01-SAMSS-046 and applicable ASTM std.
0060 R X Mill Test Certificate Per 01-SAMSS-046 and applicable ASTM std.
IR010800 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 06/28/2021 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 01/12/2021 IR010800 3 of 3
(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE
(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
Notes:
(1) Refer detailed instruction sheet 175 - 000003 of Inspection and testing requirements for ideal use of this form.
End of IR010800