Professional Documents
Culture Documents
The solar panel comes with TY10S provides power supply to the light, which makes TY10S
a self-contained and care-free light unit. Also, with the solar function, the light is easy to
deploy to almost any condition and any emergency case. Robust body built and surface
coating provides good protection against hash environments. TY10S is equipped with an
8Ah NiMH rechargeable battery which could power the light up to 20 days when the weather
is cloudy & rainy. NiMH battery is also a clean power source with no pollution. The NiMH
battery is also easy to find almost anywhere. TY10S is also available with an optional on/off
switch for storing and protect battery from over-discharging.
and replacement.
• Dry contact alarm, it will give an alarm in case of light failure, battery failure, power failure
etc.(optional)
Applications:
Shanghai Lansing Electronics Co., Ltd Tel:+86 021-39921107 Fax:+86 021-39921107 Web:www.lansinglight.com E-mail:sales@lansinglight.com
Add: No 609, Tahui Rd, Shihudang Town, Songjiang Dist Shanghai, China, 201612
All rights reserved by Lansing,without the written authorization of the Lansing, any part thereof shall not be reproduced or transmitted in any form. 1/6
TY10S LED Single Low Intensity Solar
Powered Obstruction Light (Type A)
Specifications:
LIGHT OUT-PUT
OPERATION
POWER SUPPLY
Battery Capacity 8 AH
MECHANICAL STRUCTURE
Water-proof IP68
Shanghai Lansing Electronics Co., Ltd Tel:+86 021-39921107 Fax:+86 021-39921107 Web:www.lansinglight.com E-mail:sales@lansinglight.com
Add: No 609, Tahui Rd, Shihudang Town, Songjiang Dist Shanghai, China, 201612
All rights reserved by Lansing,without the written authorization of the Lansing, any part thereof shall not be reproduced or transmitted in any form. 2/6
TY10S LED Single Low Intensity Solar
Powered Obstruction Light (Type A)
TY10A
TY10A is updated with a flash frequency adjustable switch, which can set 40, 50, 60, 70 and
90 FPM (Flash per minute). Additionally, a Dry Contact Relay is built in the light to report light
failure to central monitoring devices, in case of working with junction box or control box.
• Battery fail
TY10W
TY10W is further updated from TY10DA, which can realize both Flashing Frequency
Adjusting &Alarm
In case of working with our wireless control box, TY10W can report failure status to central
• Battery fail
Ordering Code
Basic functions
Synchronization
Wireless
Note: Synchronization & alarm report functions need junction box or control box to be in the
system
Shanghai Lansing Electronics Co., Ltd Tel:+86 021-39921107 Fax:+86 021-39921107 Web:www.lansinglight.com E-mail:sales@lansinglight.com
Add: No 609, Tahui Rd, Shihudang Town, Songjiang Dist Shanghai, China, 201612
All rights reserved by Lansing,without the written authorization of the Lansing, any part thereof shall not be reproduced or transmitted in any form. 3/6
TY10S LED Single Low Intensity Solar
Powered Obstruction Light (Type A)
Shanghai Lansing Electronics Co., Ltd Tel:+86 021-39921107 Fax:+86 021-39921107 Web:www.lansinglight.com E-mail:sales@lansinglight.com
Add: No 609, Tahui Rd, Shihudang Town, Songjiang Dist Shanghai, China, 201612
All rights reserved by Lansing,without the written authorization of the Lansing, any part thereof shall not be reproduced or transmitted in any form. 4/6
TY10S LED Single Low Intensity Solar
Powered Obstruction Light (Type A)
Option 1
1. Secure the light on a smooth surface which has enough strength, if there is no mounting
surface, we can customize special mounting bracket as request
2. When installation, please stay away the nearby light source
3. Use 4XM8 screws to fix the light base on the smooth place
Option 2:
Use a MBP80 Mounting brackets below picture) to fix the light on the pole, pipe, telecom
tower or any other places required the light.
Notice:
• The part of material of products is PC( like lamp cover and lamp shell ), so it cannot direct
or indirect touch the organic solvent, such as industrial alcohol, banana oil, isopropyl alcohol,
carbon tetrachloride, cyclohexanone and so on, otherwise, the product will be corrosion.
• For protection of batteries during transport and storage, lights bottom installed sleep
switch, and is set to sleep mode, please check whether the lamp is in normal working
condition before installation or testing, turn on the switch according to the instruction.
• The bottom of the switch control: Press 3 to 5 seconds, the light starts to sleep (stopped
working); Press 1 to 2 seconds, the lights began to work); testing and operation of switches in
the dark environments, or covered with black shade cloth in order to operate correctly.
Shanghai Lansing Electronics Co., Ltd Tel:+86 021-39921107 Fax:+86 021-39921107 Web:www.lansinglight.com E-mail:sales@lansinglight.com
Add: No 609, Tahui Rd, Shihudang Town, Songjiang Dist Shanghai, China, 201612
All rights reserved by Lansing,without the written authorization of the Lansing, any part thereof shall not be reproduced or transmitted in any form. 5/6
TY10S LED Single Low Intensity Solar
Powered Obstruction Light (Type A)
SECOND WAY:Use a Charger( around 4.2v-5v) such as switching power supply etc
Shanghai Lansing Electronics Co., Ltd Tel:+86 021-39921107 Fax:+86 021-39921107 Web:www.lansinglight.com E-mail:sales@lansinglight.com
Add: No 609, Tahui Rd, Shihudang Town, Songjiang Dist Shanghai, China, 201612
All rights reserved by Lansing,without the written authorization of the Lansing, any part thereof shall not be reproduced or transmitted in any form. 6/6