This document outlines the minimum and maximum specifications for various parts of a dragster body including its length, mass, height, width, CO2 housing dimensions, axle specifications, wheel dimensions, and wheelbase/screw eye placement distances. Key requirements include a body length between 200-305mm, total width including wheels of 60-90mm, CO2 housing hole diameter of 19-20mm, axle diameter of 3mm, and a wheelbase between axle holes of 105-270mm.
This document outlines the minimum and maximum specifications for various parts of a dragster body including its length, mass, height, width, CO2 housing dimensions, axle specifications, wheel dimensions, and wheelbase/screw eye placement distances. Key requirements include a body length between 200-305mm, total width including wheels of 60-90mm, CO2 housing hole diameter of 19-20mm, axle diameter of 3mm, and a wheelbase between axle holes of 105-270mm.
This document outlines the minimum and maximum specifications for various parts of a dragster body including its length, mass, height, width, CO2 housing dimensions, axle specifications, wheel dimensions, and wheelbase/screw eye placement distances. Key requirements include a body length between 200-305mm, total width including wheels of 60-90mm, CO2 housing hole diameter of 19-20mm, axle diameter of 3mm, and a wheelbase between axle holes of 105-270mm.
DRAGSTER BODY – mass with wheels and no CO2 100 g 300 g DRAGSTER BODY – height at rear with wheels 75 mm DRAGSTER BODY – width at axles- front and back 35 mm 45 mm *F- B- DRAGSTER BODY – total width including wheels 60 mm 90 mm DRAGSTER BODY –minimum height and width 10 mm * CO2 HOUSING – depth of hole 50 mm 52 mm * CO2 HOUSING – entire wall thickness 3 mm * CO2 HOUSING – hole diameter 19 mm 20 mm * CO2 HOUSING – lowest point to race surface 26 mm 40 mm AXLES - diameter 3 mm 3 mm * AXLES -length 42 mm 70 mm AXLES HOLE- height above body bottom 5 mm 10 mm * AXLES HOLE – position from front and back of body 10 mm 60 mm *F- B- WHEELS - front diameter 30 mm 40 mm WHEELS – front width at greatest diameter 2 mm 18mm WHEELS - rear diameter 30 mm 40 mm WHEELS - rear width at greatest diameter 15 mm 19 mm WHEELBASE - space in between axle holes 105 mm 270 mm * SCREWEYES – distance apart 150 mm 270 mm *