Albert-Ludwigs-Universitat Freiburg
Technische Fakultat
Transcript of records
Mr
Imtiaz Ahmed
‘Sundgauallee 54 01-08
78110 Freiburg im Breisgau
c ey. Grade/Status ECTS
‘Master of Science in Microsystems Engineering
wit he Finte-Element-Metnoa
Micro-fidics 3.90 5 ss2014
MST Design Laboratory | for Mikrosystemtechniker - Laboratory Course 2.00 3 wS2012/13
Sensors 270 5 ws201213
‘Slona processing 370 5 ss2013
Elective Modules Master of Science in Microsystems Engineering BE 26 WS 2013/14
| ‘Personal profile BE 17 .WS 2013/14
psoas EN recy 2 sd, KU et sna 21 ade eonly
Elesuey (owas) pret?Albert-Ludwigs-Universitat Freiburg
Technische Fakultat
Transcript of records
Mr
Imtiaz Ahmed
‘Sundgauallee 54 01-08
79110 Freiburg im Breisgau
Degree program: Master of Science (M. Sc.), Microsystems Engineering, Major, PO 2009
GredelStatus ECTS __ Semester/Remark
Projekimanagement fr ngenieure/Projecl management for engineers 2003 OWS2013I4
Reinraumlaborkurs fir Ingenieure / Clean Room Laboratory for Engineers 230 3 accrediation
Theoretische Methoden fur dss Design von MEMS |/ Theoretical Methods for 1.00 3 accrediation
the Design of MEMS 1
Materials BE 9 wszorane
Halbleitetechnologie/ Semiconductor Technology and Devices 370 3 wszotata
Testatukturen und Methoden fur ICs und MEMS /Test Structures and Methods 2.30 6 wszotate
force and MEMS
‘Additional achievements (lectures) ws 2013/14
Elektrochemische Fertigungsvertehren in der Mikrotechnk / Electrochemical BE ws 2013114
production technologe = Lecture
Eptani und Verfahren fur Optoslektronische Bauelemente / Epitaxy and Processing BE ws 2013/14
of Compound Semiconductors - Lecture
Gassensork / Gas sensors -Lecture BE ws 2013/14
‘Grundlagen der Elektrostmulation / Fundamentals of electrical stimulation - Lecture BE ws 2013/14
Leistungsetektronik: Systeme und Kenzepte / ower Electronics: Devioes and 8E ws 2019/14
Concepis - Lecture
RF und Mikzovelln Schatungen und Systeme /RF-and Microwave Cicuts and SE ws 201314
Systems - Lecture
“Techniken zur Oberfachermodtizierung ! Surface coating Techniques - Lecture BE ws 2013/14
Zuvertssipkelstechnik / Retabilty Engineering - Lecture BE ws 2013/14
Zuverlssigketstechnik /Rekabilty Engineering - Exercises BE ws 2013114
—
Freiburg. Br, October 6, 2016
taste)
pipe 2et2Transcript of Records ~ Explanations
‘According to the Examination Regulations of the University of Freiburg for the Master's Program in
Mikrosystemtechnik and Microsystems Engineering ~ Academic regulations 2009
4. Information’s and abbreviations
nGradelStatus“ Note value: Grading of the Modules/Examinations
BE: pass; Modules, which are credit-only and are
graded as “BE" if successfully completed.
»ECTS-Points* Point value: The sum of the credit for the course examined is
given in ECTS (European Credit Transfer and
Accumulation System). ECTS-Points are awarded
for each Module, which approximately correspond
to the scope of the course in each case
1 ECTS-Point stands for 30 working hours
Grader Name: ‘The Examination Committee appoints the graders
of an Examination! a Module.
»Remark* Accreditation: ‘A period of study completed at another university or
other equivalent institute of tertiary education,
which is acknowledged as being equivalent to this
program
2. Grading of Examinations/Modules and the Master's Thesis
The grades for the individual achievements in examinations/modules are determined by the grader
concerned in each case, The following grades are to be use to assess the achievements in
examinationsimodules. For a more differentiated grading of the examination results, intermediate
grades can be generated by lowering or raising the grades by 0,3:
1,01,3 excellentivery good —_an excellent level of achievement
4,712,012,3, good a level of achievement lying considerably above the
average requirements
2,718,013,3 satisfactory a level of achievement fufiling the average
requirements
3,714,0 sufficient a level of achievement which, despite certain
deficiencies, still fulfs the requirements
Master's Thesis and Presentation: The grade for the Master's Thesis and the
Presentation of the Master's Thesis is weighted
with 4/5 for the Thesis and 1/5 for the Presentation,
3. Awarded Final Grades
‘The student is considered to have passed the Master's Program as soon as she/he has acquired
all the required ECTS-points (120 points) and the Master's Thesis has been assessed with a
grade of at least sufficient (4,0), The grade for the Modules and the Master's Thesis is derived
from the ECTS-Points weighted average (weighted arithmetic mean) of the individual grades. The
awarded Final Grades are’
With an average of up to 1,5: excellentivery good
With an average of 1,6 to 2,5: good
With an average of 2,6 to 3,5: satisfactory
With an average of 3,6 to 4,0: sufficient
Overall assessment ,with honors": I the grade for the Master's Thesis and for all
Modules is 1,3 or better, the overall assessment of
“with distinction” will be awarded.