Professional Documents
Culture Documents
177 SL20
177 SL20
Features
Protip tilt SL20 can be used alone or in combination with a
controller.
The controller is equipped with a circuit that can be adjusted
0~10 seconds, helping the tilt switch not to be interrupted by
tilting for a short time.
The normal/alarm position is set by jumper setting, by selecting its normal upright or
tilted position.
The result is sturdy and features corrosion resistance Easy to install PCB control is
equipped
All first lines are equipped with additional conditions.
Applications
Trough plugged in and trough transition detected
Detect conveyor belt deviation
Tripper discharge detection
No material detection of conveyor or vibrating feeder
Technical Specifications
Contact: Normally closed, non-mercury switch, 250mA/24 VDC, non-inductive load or
2amp 110/240 VAC rated switch
0.8A at 240VAC/1.5A at 120VAC (optional)
Rated Temp.: -40℃ ~ +200℃
Enclosure: Cast Iron, nickel-chrome alloy plated; also available in Stainless Steel
Tilt angle: 15