Professional Documents
Culture Documents
CR Rings
CR Rings
DESCRIPTION DIMENSIONS
Control arm seating bracket diameter 85+0.054mm
Control arm Bore Diameter 230.312mm
(Camtech maintenance manual annexure 12.14)
Clearance between longitudinal bump stop and cross section 8mm +5/-2mm
Height from top plate of side frame to upper face of spring 47+/-3mm(tare)Variation at four
seat. Location onbogieshouldbe≤6mm
Lat. Clearance 25mm+/-5 mm
Shop Schedule
Shop Schedule I 18months/6lakhKms whichever is earlier
Shop Schedule II 36months/12lakhKmswhicheverisearlier
Second Shop Schedule I 54months
Shop Schedule III 72months/24lakhKmswhicheverisearlier