A. DIMENSIONS B. INPUT FOR SUPPORT CONDITION Longer span: Ly = 3.125 m Ly Upper edge Shorter span : Lx= 3.1 m Thickness of the slab : T 140 mm Required thickness (to start with) 89 mm Left edge Lx Clear cover to main reinf. 25 mm Right edge Lower edge C. MATERIAL Span ratio Ly / Lx = 1.01 2 Grade of Concrete : fck 25 N/mm Edges Continuous 2 Grade of Reinforcement Steel : fy 500 N/mm Long Upper edge 1 3 Density of reinforced concrete 25 Kn/m Sides Lower edge 2 1 if Yes and 2 Short Left edge 1 if No D. LOADING Sides Right edge 2 2 Self weight of slab 3.50 Kn/m Cond-5 2 Finish on the slab 1.00 Kn/m Two adjacent edges discontinuous 2 Other load ( if any) 0.50 Kn/m Effective depth : deff in mm 110 2 Total Dead Load : DL 5.00 Kn/m Error Message on Input Data (if any) 2 Live Load : LL 2.50 Kn/m A. Dimensions None 2 Total UDL : w =DL + LL 7.50 Kn/m B. Support Condition None 2 Total Ultimate UDL : 1.5(DL + LL) 11.25 Kn/m D. Loading None THIS IS A TWO WAY SLAB E. DESIGN FINAL OUTPUT Short Span Long Span at span at support at span at support Moment Coeff. 0.04 0.053 0.035 0.047 Ult. Moment: Mu in Kn-m 4.32 5.73 3.78 5.08 T10@150c/c T10@150c/c Remarks : It has been designed as under-reinforced section T10@150c/c Required Ast (mm^2) 92 123 81 109 Minimum Ast (mm^2) 132 T10@150c/c Design reinforcement 132 132 132 132 Diameter of the bar 10 10 10 10 Required spacing 575 575 575 575 Overall Thickness of the slab is 140 mm Allowable min spacing 35 Allowable max spacing 300 300 300 300 Final Status O.K Spacing provided 150 150 150 150 Check O.K O.K O.K O.K G. SHEAR CHECK F. DEFLECTION CHECK Design Shear Vu Kn/m 8.79 Maximum allowable span to depth ratio with modification Factor= 70.00 Actual stress N/mm^2 0.088 Actual span to effective depth = 28.18 Design shear strength 0.4964 Depth is sufficient O.K O.K. No shear reinf. Required Actual deflection Elastic deflection 0.3215 mm Show costing (Y/N) y Permissible =L/250 mm Creep deflection = 0.3430 mm O.K Cost in Rs.per sq.m 0 Actual Shrinkagedeflection= 0.8797 mm Reinf. Steel in Kg / L/ 2008mm 0 ratio Total deflection 1.5442 mm <12.4 mm Cu.m of concrete