Professional Documents
Culture Documents
3054C Dit
3054C Dit
Governing Key
#2 denotes 6% +/- 2% governing.
450 #3 denotes 7% +/- 2% governing.
425 408.0 #4 denotes 8% +/- 2% governing.
A denotes 5% +/- 2% governing.
400
Torque, Nm
375
350 #4
#3
#2
325
A
300
Power, kW
50
45
40
35
30
25
20
15
1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300
Speed, rev/min
Performance after 60 hours operation with fuel oil at 40°C at pump inlet.
Notes: Exhaust Quality Standard Certification Refs (Rated Speeds)
1. For duty cycle refer to the C power Smoke:
rating definition in the Caterpillar
Max power - max torque: <2,5 BSU.
Industrial Engine Ratings Guide
(LECH3874). 77/537/EEC- Includes FAS. 2166/2000 (2000), 2166/2100 (2100), 2166/2200 (2200),
2166/2300 (2300)
USA 40 CFR part 86 sub-part I. PKXL04.4RG1 (2300, 2200, 2100, 2000)
Emissions:
EU NRMM 97/68/EC Stage 2. e11*97/68GA*2001/63*0245* (2300, 2200, 2100, 2000)
USA 40 CFR part 89.112 Tier 2. PKXL04.4RG1 (2300, 2200, 2100, 2000)
Auxiliaries fitted to engine: USA 30 CFR Part 7 (MSHA)
Alternator - off load.
Balancer - not fitted. Japanese MLIT Step 2. 2-313 (2300, 2200, 2100, 2000)
Fan - not fitted.
Power Standard Certification Refs (Rated Speeds)
80/1269/EEC 2166/2000 (2000), 2166/2100 (2100), 2166/2200 (2200),
2166/2300 (2300)
Note1: Unless otherwise specified, all stated data is for maximum rated speed and 100% load.
Internal References
Curve Issue No: 4 DCP Number(s): 06-5961 TAN Number: B6891_EVANSB_TAN_02
Curve Issue Date : 5-Jan-2006 FIE EDR Number
SFC Map (g/kW.h) for Engine Model: Curve: C 2166 Sheet 3
3054C DIT Issue: 4 Date: 5-Jan-2006
Caterpillar Inc.
©2006 Commercial in Confidence,
proprietary information of
Caterpillar Inc.
NOTE: This SFC data was recorded from a single test of a development engine and it represents
indicative performance for the engine model. The fuel consumption of individual engines
may deviate due to component and setting tolerances associated with production processes.
450
425
400
216
8
375
21
218
220
350 7
21
0
22
325
9
21
230
300
235
275
21
3
212 0
24
Torque, Nm
250
0
215
25
214
225
217
216
219
200
0
26
8
0
21
27
175 0 2
22 22 2 25
150 0
28
290
230
235
125
0
240 30
100 250
260
270
75 280
290
300
400
50
350
For rating standards and technical specification information refer to sheets 1 and 2. Issued by:
J.H. Boorman
(Legislation Engineer)