VolteRedirectSwitch VoLTE Meaning: Controls whether VoLTE services support intra-
Redirect RAT redirection.
Switch If this parameter is set to ON, VoLTE services support redirection and QCI-1 UEs can be redirected. If this parameter is set to OFF, redirection is not supported for QCI-1 UEs. This parameter applies only to LTE FDD and LTE TDD.
GUI Value Range: OFF(Off), ON(On)
Unit: None
Actual Value Range: OFF, ON
MML Default Value: None
Recommended Value: OFF(Off)
Parameter Relationship: None
Service Interrupted After Modification: No (And no
impact on the UE in idle mode)
Impact on Radio Network Performance: If this parameter
is set to ON, QCI-1 UEs can be redirected and call drops may be prevented during temporary voice service interruption, ensuring user experience. However, the number of intra-RAT intra-duplex-mode redirections increases.