Professional Documents
Culture Documents
Plant 3D Specs and Catalogs - 422024011817-18-0517180542
Plant 3D Specs and Catalogs - 422024011817-18-0517180542
Specifies branch fittings to use in the branch table and sets branch fitting
priority.
Part Type Specifies the fitting to use for the branch type. Specify pipe as the
part type for a stub-in.
Spec Part Specifies a part. If you set Use preferred part from pipe spec the part
use priority in spec sheet is used.
Add Reducer Adds an additional part to use for the branch. If selected, a
second row is added for the branch connection. For example, you can add a
reducer to a tee.
Up Arrow Moves the branch fitting up the part setup table. The table order
is for display purposes only, and does not change branch use preference.
Down Arrow Moves the branch fitting down the part setup table.