You are on page 1of 25

MEGHA ENGINEERING & INFRASTRUCTURES LTD.

BHUBANESWAR BULK WATER SUPPLY PROJECT


SITE: BHUBANESWAR RA Bill No:- 03

AGENCY: Mr.Sangram Kesari Baliarsingh Bill From:- 25.02.2016 to 31.03.2016

SCOPE OF WORK: Earth work Excavation & Miscellinous works at MBR


CHEQUE ISSUED IN THE NAME OF : Mr.Sangram Kesari Baliarsingh
mendhasala site

WORKORDER No:- MEIL/BBWS/15-16/090 dtd 21.04.2015 PAN No.: BQWPB0358K Bill Dated :- 05.04.2016

UP TO DATE PREVIOUS PRESENT


WO
S. No PARTICULARS WO Ref UNIT RATE
Qty
QTY AMOUNT QTY AMOUNT QTY AMOUNT

A WORK DONE DETAILS


Hire Charges for JCB on hourly basis inculding diesel and
MEIL/BBWS/
1 Driver batta) for cleaning bushes , trees etc near Hrs 23 800.00 21.3000 17,040 21.30 17,040 0.00 -
15-16/090
mendasala work site.
Hire Charges for JCB including Driver & Helper wages (26th
2 Month 90000.00 2.0413 183,713 1.03 92,903 1.009 90,810
Feb 2016 to 31st March 2016)

Hire Charges for Dumpers of 13 cum capacity including


3
Driver & Helper Wages

a OR 05 Z 2829 (from 02.02.16 to 05.03.16) 60000.00 1.0845 65,072 1.0845 65,072 -

b OR 02 BS 9861 (from 25.01.16 to 05.02.16) MEIL/BBWS/ 60000.00 0.3226 19,355 0.32 19,355 -
15-16/090-S2
c OR 02 AE 3465 (from 25.01.16 to 05.03.16) Month 60000.00 1.2414 74,483 1.24 74,483 -

d OR 09 E 6790 (from 26.02.2016 to 31.03.16) 60000.00 1.7184 103,105 0.68 40,645 1.041 62,460

e OR 14 L 4890 (from 04.02.16 to 08.02.16) 60000.00 0.1613 9,677 0.16 9,677 -

f OR 14 L 9768 (from 05.02.16) 60000.00 - - 0.00 -

g OR 09 E 6425 (from 10.02.16 to 28.02.16) 60000.00 0.6196 37,175 0.62 37,175 -

B
Earth work excavation by in all type of soils for foundation
1 trenches with all lead & lift as directed by Enginer/In CUM 98 120.00 0.0000 - - -
charge.
charges for supplying and filling of River sand with all lead
2 CUM 65 320.00 #REF! #REF! - #REF! #REF!
& as directed by Engineer/In charge.

Page 1 of 25
MEGHA ENGINEERING & INFRASTRUCTURES LTD.
BHUBANESWAR BULK WATER SUPPLY PROJECT
SITE: BHUBANESWAR RA Bill No:- 03

AGENCY: Mr.Sangram Kesari Baliarsingh Bill From:- 25.02.2016 to 31.03.2016

SCOPE OF WORK: Earth work Excavation & Miscellinous works at MBR


CHEQUE ISSUED IN THE NAME OF : Mr.Sangram Kesari Baliarsingh
mendhasala site

WORKORDER No:- MEIL/BBWS/15-16/090 dtd 21.04.2015 PAN No.: BQWPB0358K Bill Dated :- 05.04.2016

UP TO DATE PREVIOUS PRESENT


WO
S. No PARTICULARS WO Ref UNIT RATE
Qty
QTY AMOUNT QTY AMOUNT QTY AMOUNT

providing of concrete in C.C 1:3:6 proportion of M10 grade


with 40 mm & Down size of approved gradation hard
broken granite,teap,basalt or with any other approved hard
3 aggregate including cost & conveyance of all materials, CUM 16 3900.00 #REF! #REF! - #REF! #REF!
machinery & labour with all lead & lift including machine
mixing,laying,tamping,curng etc complete., as directed by
the Engineer-In charge.

providing of concrete in C.C 1:2:4 proportion of M15


grade(for flooring,DPC,Lintel &chajja) with 20 mm
Down size of approved gradation hard broken
granite,teap,basalt or with any other approved hard
4 CUM 32 5400.00 #REF! #REF! - #REF! #REF!
aggregate including cost & conveyance of all materials,
machinery & labour with all lead & lift including,machine MEIL/BBWS/
mixing,laying,tamping curing etc complete and as directed 15-16/090-S3
by the Engineer-In charge.

Labour charges for construction of RR masonry with


cement mortar 1:6 for foundation and plinth Beams
including cost & conveyance of all materials, machinery &
5 CUM 155 3000.00 #REF! #REF! - #REF! #REF!
Labour with all lead & lift including,machine mixing,
laying , tamping, curing etc complete and as directed by
the Engineer-In charge.
Labour charges for construction of Brick work with CM
6 1:6 for super structure with all lead & lift as directed by CUM 60 3900.00 #REF! #REF! - #REF! #REF!
the Engineer/In charge.
Labour charges for plastering in smooth finish of 16mm
thk in CM 1:6 including providing of staging and curing
7 Sqm 700 140.00 #REF! #REF! - #REF! #REF!
etc., complete as per specifications with all lead and lift as
directed by the Engineer-In charge.
Supply & fixing of MS grill including Labours and materials
8 complete as per specifications with all lead and lift as Kg's 840 75.00 0.0000 - - -
directed by the Engineer-In charge.

Page 2 of 25
MEGHA ENGINEERING & INFRASTRUCTURES LTD.
BHUBANESWAR BULK WATER SUPPLY PROJECT
SITE: BHUBANESWAR RA Bill No:- 03

AGENCY: Mr.Sangram Kesari Baliarsingh Bill From:- 25.02.2016 to 31.03.2016

SCOPE OF WORK: Earth work Excavation & Miscellinous works at MBR


CHEQUE ISSUED IN THE NAME OF : Mr.Sangram Kesari Baliarsingh
mendhasala site

WORKORDER No:- MEIL/BBWS/15-16/090 dtd 21.04.2015 PAN No.: BQWPB0358K Bill Dated :- 05.04.2016

UP TO DATE PREVIOUS PRESENT


WO
S. No PARTICULARS WO Ref UNIT RATE
Qty
QTY AMOUNT QTY AMOUNT QTY AMOUNT

C
Labour charges for manual dressing of Earth work. (from MEIL/BBWS/
Day 300.00 166.0000 49,800 73.00 21,900 93.00 27,900
18.02.16 to 10.03.16) 15-16/090-S4

Total Value of Work Done #REF! 378,250 #REF!

D RELEASES
1 Rentention Money -5% on B
2 Release of With held -
Sub Total - -
Total Value of Work Done #REF! 378,250 #REF!
E DEDUCTIONS
1 TDS at 2% on A 10,192.00 7,127.00 3,065.00
2 TDS at 1% on B & C #REF! 219.00 #REF!
3 FSD - 5% on B #REF! - #REF!
4 With held - 20% against finishing -
Debit Note for Materials like Fuel, Welding Rods, Sand,
5 - - -
Agregates etc., (As per Anx - 1)
Payments Done by Cash & Cheque & Interest Charges (As
6 - -
per Annexure - 2)
Total Deductions #REF! 7,346 #REF!
F AMOUNT PAYABLE TO THE CONTRACTOR
1 Work Done #REF! 378,250 #REF!
2 Total Deductions #REF! 7,346 #REF!
NET PAYABLE #REF! 370,904 #REF!

Page 3 of 25
MEGHA ENGINEERING & INFRASTRUCTURES LTD.
BHUBANESWAR BULK WATER SUPPLY PROJECT
SITE: BHUBANESWAR RA Bill No:- 03

AGENCY: Mr.Sangram Kesari Baliarsingh Bill From:- 25.02.2016 to 31.03.2016

SCOPE OF WORK: Earth work Excavation & Miscellinous works at MBR


CHEQUE ISSUED IN THE NAME OF : Mr.Sangram Kesari Baliarsingh
mendhasala site

WORKORDER No:- MEIL/BBWS/15-16/090 dtd 21.04.2015 PAN No.: BQWPB0358K Bill Dated :- 05.04.2016

UP TO DATE PREVIOUS PRESENT


WO
S. No PARTICULARS WO Ref UNIT RATE
Qty
QTY AMOUNT QTY AMOUNT QTY AMOUNT

QS/PLANNING ENGINEER Stores ACCOUNTS GENERAL MANAGER

Page 4 of 25
R.O ( Bangalore)
RA - 14 th & PART BILL 06/Mar/14
WORK: Hiryur Chelkere PAN No.: AIGPM1413R
CLIENT : KUWSDB Ref: W.O No: MEIL/Hiryur-Chelkere/12-13/130 Dt: 05/07/2012
AGENCY: Mr. Prakash Datta Mesta SCOPE OF WORK: Laying of MS Pipes
UP TO DATE PREVIOUS PRESENT
S. No PARTICULARS WO Ref UNIT WO Qty RATE
QTY AMOUNT QTY AMOUNT QTY AMOUNT
A WORK DONE DETAILS
I Laying of MS Pipe
Excavation of Pipe line trench including blasting, site grading, sand bedding in hard rock blasting area,
recarting of excess earth, refilling including transportation of pipes from yard to site and all allied civil
works of 610mm dia (plate thickness of 5mm to 12mm) MS Pipes, fit up, welding, field jointing including 130/ Hiry-Chel/ 12-
fixing of all bends, specials, valves etc., cement motor gunetting over the field weld joints including cost 13 Dt: 05/07/2012
of materials, labour charges and hydro testing complete and formation of inspection path (Service Road)
as specified by the client.

a 813mm to 711mm to MS Pipe m 640.00 #REF! #REF! 7762.14 4,967,770.00 #REF! #REF!

b 660mm to 610mm MS Pipe m 580.00 6269.99 3,636,594.00 6269.99 3,636,594.00 -

c 864mm to 914mm to MS Pipe m 900.00 2755.56 2,480,004.00 2755.56 2,480,004.00 -

MS Pipe Laying Work Done #REF! 11,084,368.00 #REF!

II Hire Charges for Hydra


Hire charges for 12MT Hydra excluding Diesel for unloading of 864mm MS Pipes Day 3500.00 13 45,500.00 13 45,500.00

Total Gross Value of Work Done #REF! 11,129,868.00 #REF!

B DEDUCTIONS
1 TDS at 1 % on Item I #REF! 110,844.00 #REF!
1 TDS at 2 % on Item 2 910.00 910.00 -
2 FSD @ 5% on Value of Work Done for Item 1 only #REF! 554,219.00 #REF!
3 With Held for Hydro Testing @ 20% for Item 1 only #REF! 2,216,874.00 #REF!
4 Release of with Held against testing ( As per Annex - 3) #REF! #REF!
5 Debit Note for Materials like Fuel, Welding Rods, Sand etc., (As per Anx - 1) - - -
6 Payments Done by Cash & Cheque & Interest Charges (As per Annexure - 2) #REF! #REF!
Total Deductions #REF! #REF! #REF!
C AMOUNT PAYABLE TO THE CONTRACTOR
1 Work Done #REF! 11,129,868 #REF!
2 Total Deductions #REF! #REF! #REF!
NET PAYABLE #REF! #REF! #REF!

Prepared By Accounts By Verified By Passed by

Page 5 of 25
MECO TECHNOLOGIES PVT LTD.
SITE: MICM MINREM BHUBANESWAR RA Bill No:- 01
AGENCY: Ashwini Singh Bill From:- 06.10.2023 to 15.01.2024
CHEQUE ISSUED IN THE NAME OF : SCOPE OF WORK: - Residential Block B + C
WORKORDER No:- GST No.: Bill Dated :-15.01.2024
RAB - 1 TOTAL
S. No PARTICULARS WO Ref UNIT WO Qty RATE REMARKS
QTY AMOUNT QTY AMOUNT
WORK DONE DETAILS
A

A
1 Cleaning of total building floor wise & room wise including removal of unwanted garbages and dispose it to a minimum of 100 meter sorrounding away from the work Sqm 3,563.69
site.

2 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the Sqm 2,811.99
surface even and smooth complete
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed
4 medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core
cable etc as required.
Group – A Point 190.00
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with1.5 sq. mm FRLS PVC insulated
5 copper conductor single core cable in surface/ recessed PVC conduit, and earthing the pointwith 1.5 sq. mm FRLS PVC insulated copper conductor single core cable
etc. as required.
Group – A Point 30.00
6 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
3 x 1.5 sq. mm Rmt. 12,282.00
3 x 2.5 sq. mm Rmt. 9,413.50
3 x 4 sq. mm Rmt. 2,003.00

Sub Total - - -
B RELEASES
1 Release of With held -
2 Mobalization advance
3 IGST 18% - -
Sub Total - -
Total Value of Work Done - -
C DEDUCTIONS
1 TDS at 10% - -
2 FSD - 5% - -
3 With held against GST
4 Debit Note
7 Payments Done by Cash & Cheque & Interest Charges (As per Annexure - 2)
Total Deductions - -
G AMOUNT PAYABLE TO THE CONTRACTOR
1 Work Done(Including GST) - -
2 Total Deductions - -
NET PAYABLE - -

QS/PLANNING ENGINEER SITE INCHARGE ACCOUNTS INCHARGE PROJECT INCHARGE


MECO TECHNOLOGIES PVT LTD.
DEBIT NOTE - MATERIALS & OTHER CONSUMABLES
SITE: MICM MINREM BHUBANESWAR RA Bill No:- 01
AGENCY: Ashwini Singh Bill From:- 06.10.2023 to 13.01.2024
CHEQUE ISSUED IN THE NAME OF : SCOPE OF WORK: - Residential Block B + C

WORKORDER No:- Pan No: Bill Dated :-15.01.2024


Qty Value
S. No Description Unit Upto Rate Remarks
Previous Present Previous Present Upto Date Date
Date

Total 0 - -

STORES INCHARGE ACCOUNTS INCHARGE QS/PlANNING ENGINEER PROJECT INCHARGE

Page 7 of 25
MECO TECHNOLOGIES PVT LTD.
SITE: MICM MINREM BHUBANESWAR
DEBIT NOTE - CHEQUES & CASH PAYMENTS
SITE: MICM MINREM BHUBANESWAR Project Code : MINREM BBSR

AGENCY: M/s Madhulika Construction PAN:

Cheque In the Name of : Scope of Work:

WORKORDER No:-

Voucher Mode of
S. No Date Amount Cheque No Date Bank RAB Remarks
No Payment
1
2
3
4
5
6
7
TOTAL -

ACCOUNTS INCHARGE QS/PLANNING ENGINEER PROJECT INCHARGE


Residential Block B + C
Sl No Building Name Floor No UoM Floor Area Total Area Remarks
1 GROUND FLOOR Sqm 104.65
2 1ST FLOOR Sqm 432.38
3 2nd FLOOR Sqm 432.38
4 3rd FLOOR Sqm 432.38
Residential
5 4th FLOOR Sqm 432.38 3563.69
Block B + C
6 5th FLOOR Sqm 432.38
6th FLOOR Sqm 432.38
7th FLOOR Sqm 432.38
7 8th FLOOR Sqm 432.38
SL NO ROOM SPECIFICATION WALL NO
101 102 103 104 201 202
1 W1 2.64 5.99 6.34 3.60 1.02 3.63
2 W1-A - - - - 0.81 -
3 W1-B - - - - 0.85 -
4 W2 2.67 2.97 1.44 1.28 1.15 1.80
5 W2-A - - - - 11.62 -
6 DRAWING & DINING W2-B - - - - - -
7 W3 1.17 4.29 2.34 2.54 3.54 2.60
8 W3-A - - - - 2.84 -
9 W4 10.15 5.25 3.66 - 1.53 3.18
10 W4-A - - - - 1.46 -
11 W4-B - - - - - -
12 W1 0.94 0.30 0.85 - 0.99 -
13 W2 1.87 - - 0.88 0.79 -
14 W2-A - - - - 2.07 -
INTERNAL CORRIDOR
15 W3 - - - - - -
16 W4 4.51 - - 3.07 2.17 -
17 W4-A - - - - 1.55 -
18 ROOF W1 - - - - - -
19 W1 5.52 2.70 3.76 2.96 3.15 1.71
20 W2 4.09 3.16 1.32 2.19 2.34 3.43
21 W2-A - - 0.86 - - -
22 BED ROOM 1 W3 3.15 1.31 1.45 2.45 1.68 1.34
23 W3-A - - - - - 0.86
24 W4 3.97 2.89 4.93 5.19 2.12 3.06
25 W4-A - - - - - -
26 W1 3.56 6.11 3.76 2.33 1.99 4.56
27 W1-A - - - - 2.05 -
28 W2 6.01 1.82 1.32 4.00 3.46 -
29 BED ROOM 2 W3 3.55 3.63 2.97 2.35 2.04 3.20
30 W3-A - - - - - -
31 W4 4.01 3.33 2.88 5.59 2.31 3.48
32 W4-A - - - - - -
33 W1 3.32 - - 2.66 1.63 -
34 W1-A - - - - 1.47 -
35 W1-B - - - - 2.51 -
36 W2 6.21 - - 4.44 2.66 -
BED ROOM 3
37 W3 3.80 - - 1.63 1.63 -
38 W3-A - - - - - -
39 W4 4.38 - - 2.16 2.16 -
40 W4-A - - - - 0.80 -
41 W1 - - - 1.66 - -
42 SHAFT AREA W2 - - - 2.62 - -
43 W3 - - - 1.66 - -
TOTAL 75.51 43.75 37.88 55.25 66.39 32.86
Residential Block B+C Putty Work M
ROOM NO
203 204 301 302 303 304 401 402 403 404
13.09 4.15 1.00 3.16 3.99 2.88 2.89 3.38 4.08 8.06
- 0.54 2.44 - - - 2.88 - - -
- - - - - - - - - -
1.62 1.30 1.15 1.80 1.58 0.99 0.98 1.67 1.75 1.01
- 0.36 - - - 4.12 2.43 - - 0.78
- 0.36 - - - - 3.38 - - -
2.91 2.62 1.38 2.60 2.73 1.28 2.35 2.42 0.29 1.17
- 0.28 - - - - - - - -
9.19 8.87 1.70 3.18 3.34 5.39 1.70 2.96 6.55 5.80
- 1.08 1.40 - - - 8.41 - - -
- - - - - - 0.87 - - -
1.00 1.00 0.94 0.90 1.05 0.88 - 0.95 - 0.94
- 1.00 1.10 - - 0.88 1.27 - - 0.94
- 2.47 - - - - - - - -
- - - - - - - - - -
- 2.41 6.78 - - 2.12 4.11 - - 2.25
- 2.11 - - - - - - - -
- - - - - - - - - -
1.65 3.23 4.81 1.71 2.66 8.35 4.22 1.71 2.09 3.55
1.44 2.39 3.56 3.43 10.78 6.19 2.92 3.43 3.70 2.63
1.05 - - - - - 1.11 - - -
1.58 1.19 2.56 1.42 1.50 2.81 2.31 1.26 1.53 1.23
- - - - - - - - - -
3.40 2.97 3.23 3.06 3.23 5.96 2.65 2.72 3.06 3.37
- - 0.60 - - - 1.49 - - 3.00
3.76 2.51 2.70 4.00 7.14 4.41 2.42 4.00 4.47 1.94
- 1.09 - - - - 1.56 - - -
1.32 4.08 4.55 1.40 1.40 7.43 4.30 1.40 1.57 3.28
- 2.20 2.69 8.58 2.80 4.39 2.47 3.14 - 1.94
- - - - - - 1.54 - - -
2.58 5.59 3.04 2.58 2.58 4.96 2.60 2.88 3.12 2.19
- - - - - - - - 2.67 -
- 1.58 1.82 - - 3.15 2.81 - - 1.71
- - - - - - 1.89 - - 1.15
- - - - - - - - - -
- 2.95 3.48 - - 5.89 5.04 - - 3.02
- 1.80 2.82 - - 3.60 2.76 - - 1.69
- - - - - - - - - 0.87
- 2.74 3.74 - - 5.70 3.66 - - 2.74
- - - - - - 0.50 - - -
- 1.66 - - - 1.66 - - - 1.66
- 2.76 - - - 2.62 - - - 2.62
- 1.66 - - - 1.66 - - - 1.66
44.59 68.94 57.50 37.81 44.79 87.33 77.49 31.91 34.86 61.16
+C Putty Work Measurement as Per site
ROOM NO
501 502 503 504 601 602 603 604 701 702
5.89 6.17 6.80 - 4.65 6.17 8.83 6.20 6.20 6.17
- - - - - - - - - -
- - - - - - - - - -
1.67 3.24 2.70 1.67 2.20 3.28 3.51 2.20 1.87 2.97
4.03 - - 4.03 5.30 - - 5.30 5.30 -
- - - - - - - - - -
2.14 4.68 5.20 2.14 2.76 4.55 5.07 2.00 2.55 4.21
- - - - - - - - - -
12.30 5.41 6.36 12.30 11.43 5.91 5.41 11.60 12.18 5.25
- - - - - - - - - -
- - - - - - - - - -
1.82 1.65 - 1.98 2.05 1.50 1.50 1.73 2.09 -
1.93 - - 1.87 2.11 - - 2.09 2.06 -
- - - - - - - - - -
- - - - - - - - - -
4.90 - - 4.37 2.12 - - 5.03 5.03 -
- - - - - - - - - -
- - 2.85 - - - - - - -
6.50 3.57 - 5.91 7.60 2.66 3.42 6.70 7.88 3.99
4.38 7.16 1.20 4.53 5.64 5.72 11.05 4.96 5.84 8.00
- - - - - - 5.11 - - -
3.15 2.84 - 2.73 4.05 2.37 3.05 4.94 3.05 3.32
- - - - - - - - - 1.47
4.24 6.46 2.40 3.71 5.11 5.78 6.56 5.17 3.84 7.14
- - - - - - - - - -
3.13 9.31 7.29 3.67 3.13 8.93 9.17 3.89 4.32 9.87
- - - - - - - - - -
5.28 3.14 2.31 6.84 5.10 3.14 2.39 6.55 7.64 3.47
3.55 6.60 4.95 4.09 3.78 6.27 6.44 3.01 4.09 6.93
- - - - - - - - - -
4.01 6.06 4.85 5.59 4.28 5.76 5.91 3.40 4.86 5.91
- - - - - - - - - -
3.80 - - 3.61 3.80 - - 3.48 3.80 -
2.56 - - 2.43 2.56 - - 2.34 2.56 -
- - - - - - - - - -
7.10 - - 5.50 7.10 - - 6.50 7.10 -
4.34 - - - 4.34 - - 3.26 4.34 -
- - - - - - - - - -
5.76 - - 5.76 5.76 - - 5.27 5.76 -
- - - - - - - - - -
- - - 1.66 - - - 1.66 - -
- - - 2.62 - - - 2.62 - -
- - - 1.66 - - - 1.66 - -
92.47 66.29 46.90 88.66 94.87 62.03 77.42 101.54 102.36 68.69
STILT CUMM.
STAIRCASE
703 704 801 802 803 804 FLOOR WALL
9.06 4.77 3.88 9.26 11.91 5.58 171.43
- - - - - - 6.68
- - - - - - 0.85
3.06 8.01 6.59 2.70 2.79 5.87 79.49
- - - - - - 43.27
- - - - - - 3.74
4.68 2.73 2.57 4.68 3.38 2.79 92.36
- - - - - - 3.12
7.47 13.34 10.32 6.20 8.36 10.90 217.19
- - - - - - 12.35
- - - - - - 0.87
- 2.20 1.79 1.80 1.85 1.68 34.36
- 2.20 4.24 - - 1.62 26.83
- - - - - - 4.54
- - - - - - 0.00
- 5.30 - - - 4.64 58.83
- - - - - - 3.66
- - - - - - 2.85
3.23 8.27 7.88 3.32 3.04 7.29 135.04
7.24 6.13 5.84 6.67 6.25 5.40 153.00
7.42 - - - - - 15.55
3.00 4.20 3.99 2.84 3.00 3.15 212.25 422.88 78.47
- - - 1.10 - 3.87 7.30
6.46 5.57 5.03 5.34 5.78 3.87 138.28
- - - - - - 5.09
8.46 4.32 4.47 8.46 8.70 3.46 160.21
- - - - - - 4.70
2.97 7.28 6.92 2.97 3.05 6.01 122.37
6.44 4.30 4.36 5.77 6.10 1.87 124.49
- - - - - - 1.54
5.91 4.86 4.93 5.30 5.61 3.74 134.67
- - - - - - 2.67
- 3.89 3.61 - - 2.95 47.63
- 2.62 2.94 - - 3.07 25.62
- - - - - - 2.51
- 7.28 6.74 - - 0.88 81.89
- 4.45 4.01 - - 5.32 49.78
- - - - - - 0.87
- 5.90 5.33 - - 7.06 73.87
- - - - - - 1.29
- 1.66 - - - 1.66 13.25
- 2.62 - - - 2.62 21.11
- 1.66 - - - 1.66 13.25
75.40 113.57 95.46 66.42 69.83 96.94 212.25 422.88 2811.99
REMARKS
GROSS TOTAL
WIRING DETAILS
SL NO BUILDING NAME ITEM DESCRIPTION UOM QTY.
1 1.5 Sq.mm Rmt. 12282
2 2.5 Sq.mm Rmt. 9413.5
3 4 Sq.mm Rmt. 2003
RESIDENTIAL B + C
4 Conduit Pipe Rmt.
5 Flexible Pipe Rmt.
6 Circular Box No's
GROSS QUANTITY REMARKS
12282
9413.5
2003 98.4
0
0
0
R.0 ( Bangalore)
RA-VI & Part BILL 6-Aug-13
WORK : Hiriyur Challakere CWSS (Project Code:3037)
CLIENT : KUWSDB
AGENCY: Mr. Prakash Datta Mesta, SCOPE OF WORK OF SUBCONTRACTOR : MS Pipe Laying
From : 26.06.2013 To : 25.07.2013 WO No. MEIL/Hiriyur-Challakere/12-13/130 Dated 05-07-2012.
UP-TO -DATE PREVIOUS PRESENT
S.NO PARTICULARS UNIT RATE
QTY AMOUNT QTY AMOUNT QTY AMOUNT

Excavation of Pipe line trench including blasting, site grading, sand


bedding in hard rock blasting area, recarting of excess earth, refilling
including transportation of pipes from yard to site and all allied civil
works of 610mm dia (plate thickness of 5mm to 12mm) MS Pipes, fit
1
up, welding, field jointing including fixing of all bends, specials, valves
etc., cement motor gunetting over the field weld joints including cost of
materials, labour charges and hydro testing complete and formation of
inspection path (Service Road) as specified by the client.

B 711mm Dia to 813mm Dia Pipe


After completion of laying including field joints & refilling - (80% of
Rmt 512 Err:509 Err:509 2134.40 1092812.8 Err:509 Err:509
Rs.640)
After completion of hydro testing - (20% of Rs.640) Rmt 128 2,134.40 273,203 2134.40 273203.2 -
C 610mm Dia to 660mm Dia Pipe
After completion of laying including field joints & refilling - (80% of
Rmt 464 Err:509 Err:509 4112.39 1908149.0 Err:509 Err:509
Rs.580)
After completion of hydro testing - (20% of Rs.580) Rmt 116 1,995.00 231,420 1995.00 231420.0 0.0
Total Err:509 3,505,585 Err:509
DEDUCTIONS PROPOSED
1 TDS AT 1% Err:509 35,056 Err:509
2 Debit Note (As per Annexure -I ) - - -
3 FSD - 5% Err:509 175,279 Err:509
4 Total Payment Made as on Date by Cheque 2,435,895 2,435,895
5 TOTAL DEDUCTION AMOUNT Err:509 2,646,230 Err:509
AMOUNT PAYABLE TO THE CONTRACTOR
1 GROSS AMOUNT Err:509 3,505,585 Err:509
2 DEDUCTIONS Err:509 2,646,230 Err:509
3 NET PAYABLE Err:509 859,355 Err:509
4 NET PAYABLE -

Prepared By Checked By Verrified By Passed By Approved By


MEGHA ENGINEERING & INFRASTRUCTURES LTD.
CONBINED WSS TO HIRIYUR CHALLAKERE TOWN
Contarctor: Mr. Prakash Datta Mesta
Work Order No: MEIL/Hiriyur-Challakere/12-13/130 Dated 05-07-2012. Dt: 06.08.2013
MS Pipe : 610X5.6mm thk

Field Hydro
S.No Chainage Dia Data of Laying Pipe Length Welding UT Conctractor Remarks
Joints Test
From To

1 3031 3019 610MM OD x 5.6mm thk M12018802 12.20 Yes Yes Prakash Datta Mesta
2 3019 3007 610MM OD x 5.6mm thk M12018334 12.18 Yes Yes Prakash Datta Mesta
3 3007 2995 610MM OD x 5.6mm thk M12018363 12.19 Yes Yes Prakash Datta Mesta
4 2995 2982 610MM OD x 5.6mm thk M12018348 12.18 Yes Yes Prakash Datta Mesta
5 2982 2970 610MM OD x 5.6mm thk M12018701 12.17 Yes Yes Prakash Datta Mesta
6 2970 2958 610MM OD x 5.6mm thk M12018448 12.17 Yes Yes Prakash Datta Mesta
7 2958 2946 610MM OD x 5.6mm thk M12018930 12.21 Yes Yes Prakash Datta Mesta
8 2946 2934 610MM OD x 5.6mm thk M12019037 12.20 Yes Yes Prakash Datta Mesta
9 2934 2921 610MM OD x 5.6mm thk M12018990 12.18 Yes Yes Prakash Datta Mesta
10 2921 2909 610MM OD x 5.6mm thk M12018367 12.20 Yes Yes Prakash Datta Mesta
11 2909 2897 610MM OD x 5.6mm thk M12019066 12.18 Yes Yes Prakash Datta Mesta
12 2897 2885 610MM OD x 5.6mm thk M12018489 12.15 Yes Yes Prakash Datta Mesta
13 2885 2873 610MM OD x 5.6mm thk M12018582 12.18 Yes Yes Prakash Datta Mesta
14 2873 2860 610MM OD x 5.6mm thk M12018323 12.25 Yes Yes Prakash Datta Mesta
15 2860 2848 610MM OD x 5.6mm thk M12018370 12.19 Yes Yes Prakash Datta Mesta Bend
16 2848 2836 610MM OD x 5.6mm thk M12018493 12.17 Yes Yes Prakash Datta Mesta
17 2836 2824 610MM OD x 5.6mm thk M12018849 12.17 Yes Yes Prakash Datta Mesta Bend
18 2824 2812 610MM OD x 5.6mm thk M12018570 12.17 Yes Yes Prakash Datta Mesta
19 2812 2800 610MM OD x 5.6mm thk M12018564 12.18 Yes Yes Prakash Datta Mesta
20 2800 2787 610MM OD x 5.6mm thk M12018796 12.20 Yes Yes Prakash Datta Mesta
21 2787 2775 610MM OD x 5.6mm thk M12018365 12.16 Yes Yes Prakash Datta Mesta
22 2775 2763 610MM OD x 5.6mm thk M12018443 12.17 Yes Yes Prakash Datta Mesta
23 2763 2751 610MM OD x 5.6mm thk M12018350 12.16 Yes Yes Prakash Datta Mesta
24 2751 2739 610MM OD x 5.6mm thk M12018415 12.12 Yes Yes Prakash Datta Mesta
25 2739 2727 610MM OD x 5.6mm thk M12018454 12.19 Yes Yes Prakash Datta Mesta
26 2727 2714 610MM OD x 5.6mm thk M12018465 12.19 Yes Yes Prakash Datta Mesta
27 2714 2702 610MM OD x 5.6mm thk M12018440 12.19 Yes Yes Prakash Datta Mesta
28 2702 2690 610MM OD x 5.6mm thk M12018445 12.18 Yes Yes Prakash Datta Mesta
29 2690 2678 610MM OD x 5.6mm thk M12019041 12.17 Yes Yes Prakash Datta Mesta
30 2678 2666 610MM OD x 5.6mm thk M12018488 12.19 Yes Yes Prakash Datta Mesta
31 2666 2653 610MM OD x 5.6mm thk M12018668 12.21 Yes Yes Prakash Datta Mesta
32 2653 2641 610MM OD x 5.6mm thk M12018561 12.16 Yes Yes Prakash Datta Mesta
33 2641 2629 610MM OD x 5.6mm thk M12018751 12.18 Yes Yes Prakash Datta Mesta
34 2629 2617 610MM OD x 5.6mm thk M12018662 12.18 Yes Yes Prakash Datta Mesta
35 2617 2605 610MM OD x 5.6mm thk M12018646 12.19 Yes Yes Prakash Datta Mesta
36 2605 2593 610MM OD x 5.6mm thk M12018490 12.18 Yes Yes Prakash Datta Mesta
37 2593 2580 610MM OD x 5.6mm thk M12019055 12.22 Yes Yes Prakash Datta Mesta
38 2580 2568 610MM OD x 5.6mm thk M12018633 12.16 Yes Yes Prakash Datta Mesta
39 2568 2556 610MM OD x 5.6mm thk M12018621 12.20 Yes Yes Prakash Datta Mesta
40 2556 2544 610MM OD x 5.6mm thk M12019075 12.18 Yes Yes Prakash Datta Mesta
41 2544 2532 610MM OD x 5.6mm thk M12019047 12.20 Yes Yes Prakash Datta Mesta
42 2532 2519 610MM OD x 5.6mm thk M12019020 12.16 Yes Yes Prakash Datta Mesta
43 2519 2507 610MM OD x 5.6mm thk M12018707 12.16 Yes Yes Prakash Datta Mesta
44 2507 2495 610MM OD x 5.6mm thk M12018754 12.19 Yes Yes Prakash Datta Mesta
45 2495 2483 610MM OD x 5.6mm thk M12018747 12.18 Yes Yes Prakash Datta Mesta
46 2483 2471 610MM OD x 5.6mm thk M12018777 12.18 Yes Yes Prakash Datta Mesta
47 2471 2459 610MM OD x 5.6mm thk M12018521 12.17 Yes Yes Prakash Datta Mesta
48 2459 2446 610MM OD x 5.6mm thk M12018720 12.18 Yes Yes Prakash Datta Mesta
49 2446 2434 610MM OD x 5.6mm thk M12018676 12.17 Yes Yes Prakash Datta Mesta
50 2434 2422 610MM OD x 5.6mm thk M12018955 12.19 Yes Yes Prakash Datta Mesta
51 2422 2410 610MM OD x 5.6mm thk M12018386 12.18 Yes Yes Prakash Datta Mesta
52 2410 2398 610MM OD x 5.6mm thk M12018959 12.20 Yes Yes Prakash Datta Mesta
Total 633.460

Prepared By Checked By Verified By Approved By


MEGHA ENGINEERING & INFRASTRUCTURES LTD.
CONBINED WSS TO HIRIYUR CHALLAKERE TOWN
Contarctor: Mr. Prakash Datta Mesta
Work Order No: MEIL/Hiriyur-Challakere/12-13/130 Dated 05-07-2012. Dt: 10-12-2013
MS Pipe : 711X6.4mm thk
Field Hydro
S.No Chainage Dia Pipe Length Welding UT Conctractor Remarks
Joints Test
From To

1 69 81 711MM OD x 6.4mm thk 12.15 Yes Yes Prakash Datta Mesta


2 81 93 711MM OD x 6.4mm thk 12.15 Yes Yes Prakash Datta Mesta
3 93 105 711MM OD x 6.4mm thk 12.1 Yes Yes Prakash Datta Mesta
4 105 117 711MM OD x 6.4mm thk 12.16 Yes Yes Prakash Datta Mesta
5 117 130 711MM OD x 6.4mm thk 12.17 Yes Yes Prakash Datta Mesta
6 130 142 711MM OD x 6.4mm thk 12.17 Yes Yes Prakash Datta Mesta
7 142 154 711MM OD x 6.4mm thk 12.17 Yes Yes Prakash Datta Mesta
8 154 166 711MM OD x 6.4mm thk 12.15 Yes Yes Prakash Datta Mesta
9 166 178 711MM OD x 6.4mm thk 12.16 Yes Yes Prakash Datta Mesta
10 178 190 711MM OD x 6.4mm thk 12.15 Yes Yes Prakash Datta Mesta
11 190 203 711MM OD x 6.4mm thk 12.15 Yes Yes Prakash Datta Mesta
12 203 214 711MM OD x 6.4mm thk 11.74 Yes Yes Prakash Datta Mesta
13 214 226 711MM OD x 6.4mm thk 12.14 Yes Yes Prakash Datta Mesta
14 226 239 711MM OD x 6.4mm thk 12.17 Yes Yes Prakash Datta Mesta
15 239 251 711MM OD x 6.4mm thk 12.16 Yes Yes Prakash Datta Mesta
16 251 263 711MM OD x 6.4mm thk 12.19 Yes Yes Prakash Datta Mesta
17 263 275 711MM OD x 6.4mm thk 12.18 Yes Yes Prakash Datta Mesta
18 275 287 711MM OD x 6.4mm thk 12.17 Yes Yes Prakash Datta Mesta
19 287 299 711MM OD x 6.4mm thk 12.17 Yes Yes Prakash Datta Mesta
20 299 312 711MM OD x 6.4mm thk 12.17 Yes Yes Prakash Datta Mesta
21 312 324 711MM OD x 6.4mm thk 12.18 Yes Yes Prakash Datta Mesta
22 324 336 711MM OD x 6.4mm thk 12.16 Yes Yes Prakash Datta Mesta
23 336 348 711MM OD x 6.4mm thk 12.14 Yes Yes Prakash Datta Mesta
24 348 360 711MM OD x 6.4mm thk 12.19 Yes Yes Prakash Datta Mesta
25 360 372 711MM OD x 6.4mm thk 12.18 Yes Yes Prakash Datta Mesta
26 372 385 711MM OD x 6.4mm thk 12.17 Yes Yes Prakash Datta Mesta
27 385 397 711MM OD x 6.4mm thk 12.19 Yes Yes Prakash Datta Mesta
28 397 409 711MM OD x 6.4mm thk 12.17 Yes Yes Prakash Datta Mesta
29 409 421 711MM OD x 6.4mm thk 12.17 Yes Yes Prakash Datta Mesta
30 421 433 711MM OD x 6.4mm thk 12.17 Yes Yes Prakash Datta Mesta
31 433 446 711MM OD x 6.4mm thk 12.18 Yes Yes Prakash Datta Mesta
32 446 458 711MM OD x 6.4mm thk 12.17 Yes Yes Prakash Datta Mesta
33 458 470 711MM OD x 6.4mm thk 12.15 Yes Yes Prakash Datta Mesta
34 470 482 711MM OD x 6.4mm thk 11.77 Yes Yes Prakash Datta Mesta
35 482 494 711MM OD x 6.4mm thk 12.09 Yes Yes Prakash Datta Mesta
36 494 506 711MM OD x 6.4mm thk 12.19 Yes Yes Prakash Datta Mesta
37 506 518 711MM OD x 6.4mm thk 12.16 Yes Yes Prakash Datta Mesta
38 518 530 711MM OD x 6.4mm thk 12.17 Yes Yes Prakash Datta Mesta
39 530 542 711MM OD x 6.4mm thk 12.16 Yes Yes Prakash Datta Mesta
40 542 555 711MM OD x 6.4mm thk 12.15 Yes Yes Prakash Datta Mesta
Total 485.68

MS Pipe : 914X7.9mm thk

Field Hydro
S.No Chainage Dia Pipe Length Welding UT Conctractor Remarks
Joints Test
From To

1 1271 1283 914MM OD x 7.9mm thk 12.18 Yes Yes Prakash Datta Mesta
2 1283 1295 914MM OD x 7.9mm thk 12.2 Yes Yes Prakash Datta Mesta
3 1295 1307 914MM OD x 7.9mm thk 12.19 Yes Yes Prakash Datta Mesta
4 1307 1319 914MM OD x 7.9mm thk 12.19 Yes Yes Prakash Datta Mesta
5 1319 1332 914MM OD x 7.9mm thk 12.22 Yes Yes Prakash Datta Mesta
6 1332 1344 914MM OD x 7.9mm thk 12.19 Yes Yes Prakash Datta Mesta
7 1344 1356 914MM OD x 7.9mm thk 12.21 Yes Yes Prakash Datta Mesta
8 1356 1368 914MM OD x 7.9mm thk 12.16 Yes Yes Prakash Datta Mesta
9 1368 1380 914MM OD x 7.9mm thk 12.2 Yes Yes Prakash Datta Mesta
10 1380 1393 914MM OD x 7.9mm thk 12.20 Yes Yes Prakash Datta Mesta
11 1393 1405 914MM OD x 7.9mm thk 12.18 Yes Yes Prakash Datta Mesta
12 1405 1417 914MM OD x 7.9mm thk 12.16 Yes Yes Prakash Datta Mesta
13 1417 1429 914MM OD x 7.9mm thk 12.16 Yes Yes Prakash Datta Mesta
14 1429 1441 914MM OD x 7.9mm thk 12.2 Yes Yes Prakash Datta Mesta
15 1441 1454 914MM OD x 7.9mm thk 12.18 Yes Yes Prakash Datta Mesta
16 1454 1466 914MM OD x 7.9mm thk 12.19 Yes Yes Prakash Datta Mesta
17 1466 1478 914MM OD x 7.9mm thk 12.18 Yes Yes Prakash Datta Mesta
18 1478 1490 914MM OD x 7.9mm thk 12.18 Yes Yes Prakash Datta Mesta
19 1490 1502 914MM OD x 7.9mm thk 12.2 Yes Yes Prakash Datta Mesta
20 1502 1514 914MM OD x 7.9mm thk 12.17 Yes Yes Prakash Datta Mesta
21 1514 1527 914MM OD x 7.9mm thk 12.16 Yes Yes Prakash Datta Mesta
22 1527 1539 914MM OD x 7.9mm thk 12.16 Yes Yes Prakash Datta Mesta
Field Hydro
S.No Chainage Dia Pipe Length Welding UT Conctractor Remarks
Joints Test
From To
23 1539 1551 914MM OD x 7.9mm thk 12.11 Yes Yes Prakash Datta Mesta
24 1551 1563 914MM OD x 7.9mm thk 12.19 Yes Yes Prakash Datta Mesta
25 1563 1575 914MM OD x 7.9mm thk 12.18 Yes Yes Prakash Datta Mesta
26 1575 1587 914MM OD x 7.9mm thk 12.17 Yes Yes Prakash Datta Mesta
27 1587 1600 914MM OD x 7.9mm thk 12.19 Yes Yes Prakash Datta Mesta
28 1600 1612 914MM OD x 7.9mm thk 12.18 Yes Yes Prakash Datta Mesta
29 1612 1624 914MM OD x 7.9mm thk 12.17 Yes Yes Prakash Datta Mesta
30 1624 1636 914MM OD x 7.9mm thk 12.18 Yes Yes Prakash Datta Mesta
31 1636 1648 914MM OD x 7.9mm thk 12.18 Yes Yes Prakash Datta Mesta
32 1648 1661 914MM OD x 7.9mm thk 12.17 Yes Yes Prakash Datta Mesta
33 1661 1673 914MM OD x 7.9mm thk 12.18 Yes Yes Prakash Datta Mesta
34 1673 1685 914MM OD x 7.9mm thk 12.16 Yes Yes Prakash Datta Mesta

35 2772 2784 914MM OD x 7.9mm thk 12.19 Yes Yes Prakash Datta Mesta
36 2784 2796 914MM OD x 7.9mm thk 12.20 Yes Yes Prakash Datta Mesta
37 2796 2808 914MM OD x 7.9mm thk 12.20 Yes Yes Prakash Datta Mesta
38 2808 2820 914MM OD x 7.9mm thk 12.18 Yes Yes Prakash Datta Mesta
39 2820 2833 914MM OD x 7.9mm thk 12.17 Yes Yes Prakash Datta Mesta
40 2833 2845 914MM OD x 7.9mm thk 12.17 Yes Yes Prakash Datta Mesta
41 2845 2857 914MM OD x 7.9mm thk 12.16 Yes Yes Prakash Datta Mesta
42 2857 2869 914MM OD x 7.9mm thk 12.18 Yes Yes Prakash Datta Mesta
43 2869 2881 914MM OD x 7.9mm thk 12.17 Yes Yes Prakash Datta Mesta
Total 523.74

Prepared By Checked By Verified By Approved By

You might also like