GigE Camera Manual
1.Camera Connection
1: Gigabit Network Cable
2: Power + Hardware Trigger
3: Network connection indicator;
The light indicates that it is connected to 1G;
No light means not connected or connected to
a 100M network
4: Network communication indicator, flashing
indicates that data is being received or sent.
Note: Computer network port or switch must be a Gigabit network.2.POE Network Cable Power Supply
[J] Power Suppiy
rey LT
xs =
Camera Computer
]] Power Supply
Computer
1, POE Power Supply 2. POE Switch
Note: Supports IEEE® Std. 802.3af-2005 and IEEE® Std. 802.3at-2009 standards
POE power and POE switches should support this standard and support
gigabit transmission
Get Tools:
me |
jerel
(1) Windows Start ->HuaTengVision->Tools
(2) Driver Installation Directory\HuaTengVision\Tools 2
(3)Storage disk or contact the business email to get it.