Professional Documents
Culture Documents
1. PRODUCT IDENTIFICATION
Product Name ALPHATEC 240
Description 100% solids two – pack epoxy compound for underwater application
When fully cured, the mixed product is non-hazardous.
Manufacturer Alpha Kogyo KK
Yokohama, Kanagawa Pref., Japan
Tel. 81-45-5000-500 Fax. 81-45-5000-550
Contact Person Yukihiko Oigawa – President
2. INFORMATION ON COMPONENTS
3. HAZARD IDENTIFICATION
Eye Contact Thorough wash with water for at least 15 minutes while eye/s are held
open. Get medical attention.
Skin Contact For sensitive skin – wash immediately with soap and water.
Remove contaminated clothing immediately
Ingestion Wash mouth with water. Do not induce vomiting. Seek medical
attention.
Inhalation Remove from exposure, bring to fresh air
Extinguishing Media Use dry chemical, carbon dioxide foam, dry sand
Specific Hazards of Product Combustion will produce smoke and oxides of carbon
Protective Equipment Wear fire fighting protective clothing and with self - contained
For Fire-Fighting breathing apparatus
Handling Avoid contact with eyes and prolonged contact with skin
Storage Keep containers tightly closed and store in a dry, cool shaded area
Do not store with food stuffs.
Product Disposal Waste materials must be disposed of in accordance with federal, state
and local environmental control regulations.
Safety Phrases In case of contact with eyes, rinse immediately with plenty of water
and seek medical advice
The information provided herein was believed by ALPHA KOGYO KK to be accurate at the time of preparation or
prepared from sources believed to be reliable; but it is the responsibility of the user to investigate and understand
other pertinent sources of information, to comply with all the laws and procedures applicable to the safe handling
and use of the product.
This product should be used in applications consistent with our product literature.