Professional Documents
Culture Documents
Target My Jobseeker
Target My Jobseeker
1. HSE OFFICE
Responsibilities
Supports the Top Management in the HSE Policy and Guidelines issue.
Supports the Top Management in the Organization roles and responsibilities
definition, for what concerns safety aspects.
Supports the Top Management in the HSE Management System standard issue.
Ensures, in accordance with the Corporate guidelines, the implementation, updating,
review and auditing of the Company HSE Systems.
Monitors the effective implementation of appropriate Safety and Environment System
procedures and provide for their updating in line with changes in Legislation and
Company Directives.
Provides for motivation and familiarization of all Company personnel respecting the
importance of complying with Company system procedures and all Safety equipment
provided.
Assists the Commercial, Engineering and Operations Department in their dealings
with Clients in all issues concerned with Health and Safety at work.
Conducts safety audits both internal and external.
Takes part in accident / incident investigation.
Carries out analysis of accident / incident statistics, identifying trends and suggesting
improvement plans.
Provides technical support to Senior Management on any safety related subjects.
Carries out any in-house safety training.
Carries out safety audits on Sub-contractors.
Liaises between Clients on safety related issues.
Safeties related engineering input into new projects and modification programs.
Participates to HAZOP meetings prior to procurement and installation activities.
Performs Risk Assessment.
Preparation of Health and Safety documentation for new tenders.
Provides Safety support and advice, including supervision on preparation of plans and
procedures for initial contract start up activities.
Requirements
2. SAFETY OFFICE
Job Purpose:
This is an opportunity for you to be responsible and to provide, with full
responsibility and accountability, a technical service to Corporation in the areas of
Health and Safety during definition, detailed design and execution stages to ensure
Contractor(s) compliance to established HSE policies, procedures and regulations.
3. DOCUMENT CONTROLLER
Typical duties
4. PROCESS ENGINEER
Your main duties will be to:-
(Note: most of the times, if the modification is very big and exceeds a certain budget (like
adding a completely new separator to the plant), it becomes a project which is then handled
by the projects department who outsource the study to an external engineering company).
2- making sure current operating parameters (such as setpoints of the safety instruments) are
within the company's technical standards and specifications (a lot of reading to do)
3- Running simulations on a regular basis using Hysys or PRO2 and other simulation
softwares.
5- And by far this is the most important responsibility, Safety. This is the biggest
responsibility a process engineer would ever have. As a process engineer, you are the ones
approving the design of an RFM, and your biggest obstacle can be a mangement that is cost-
cutting or an operation department that is looking for a shortcut. You need to advocate fiercly
for a design that is inherntly safe and that has additional layers of protection. Your strong
principles in implementing saftey will be your ally. Your next ally are your company
technical standards (thats why you have to read a lot, however, this doesnt mean they are fool
proof, those too are normally challenged). Don't overdo it though like putting too much of
safety instruments in every pipe corner. You will learn with experience.
5. SCHEDULER
6. PROJECT MANAGER
Responsibilities
Define project scope, goals and deliverables that support the business goals and
requirements in collaboration with account sales executives, senior management and
stakeholders.
Proactively manage changes in project scope to maximize success and minimize risk
to the customer and the company.
Meet with clients to take detailed ordering briefs and clarify specific requirements for
the contracted scope of the project(s).
Develop complete project plans and associated communications documents.
Apply Siemens project process and management principles at all aspects of project
scope and deliverables.
Effectively communicate project expectations to team members and stakeholders in a
timely and clear fashion.
Estimate the resources and participants needed to achieve project goals.
Develop and deliver progress reports, proposals, requirements documentation, and
presentations.
Meet budgetary objectives and make adjustments to project constraints based on
financial analysis.
Manage the relationship with the client and all stakeholders.
Perform risk management to minimize project risks.
Establish and maintain relationships with third parties/vendors.
Where required, negotiate with other department managers for the acquisition of
required personnel from within the company.
Set and continually manage project expectations with team members and other
stakeholders. Delegate tasks and responsibilities to appropriate personnel.
Identify and resolve issues and conflicts within the project team.
Identify and manage project dependencies and critical path.
Track project milestones and deliverables.
Conduct project post mortems and create a recommendations report in order to
identify Successful and unsuccessful project elements.
Requirements
8-10+ years of Project Management experience with large systems in the utility
industry
PMPM / PMI Certification
Project managers should have a background in business skills, management,
budgeting and analysis
7. ASSET MANAGER
Range Gaji : Rp 8.000.000,-
8. PETROLEUM ENGINEER
Range Gaji : Rp 8.000.000,-
10.