1. Plane Table Surveying N=
==)
The iment used for sur in which
the vantage of plane
tabling is that the
\instruments Used In Plane Table.
— Ctinometer
By Ashish Kumar |@ @me_ashishsirFix the plane table to the tripod stand. Arrange the drawing sheet
2 | Fring of plane t2ble | nthe plane table using paper clips
Levell
| SE TREPE | plane toble shouldbe leveled using sprit evel. For small works,
—_——
eye estimation can be ok.
Centring of Plane
3 hd The table should be centred by using plumbing fork. By which we
can arrange the plotted point exactly over the ground point.
Whenever we are using more than one instrument station,
Orlentatin of Plane | orientation i estnto. can be done by using camaast bash
4 Table {-ightlag, In this case, the plane table is rotated such that plotted
lines in the drawing sheet are parallel to corresponding lines on
the ground. ————__—
A BR chon *amevey
By Ashish KumarIt can be us
iscut ‘oa suitable scale,
It is most suited when a
CONTI
in this method io Sato are so
selected that all other stations to
be plotted are visible from these.
ea we elie sores
The line joining two station is
rays from the two stations gives
the position of the statian-te-te
plotted on the drawing sheet.
By Ashish Kumar
@me_ashishsiryns whose positions have
aiready plotted on the drawing
med on the a
sheet.
drawing sheet by resection
1. let A & B be the two
stations plotted as a and b
on the drawing sheet Tt Ts
required to plot station
where the plane tabling is to
ee
2. Choose an arbitrary station
D such that CD is
approximately parallel to
AB. Angle ZCAD_&