Professional Documents
Culture Documents
B33-04-0014 Loading Prog Inst - VSD
B33-04-0014 Loading Prog Inst - VSD
Rev 0 B33-04-0014 1 of 8
After Loading Configuration (2.0.9A & 2.1.3) Programs onto your Desktop
Move Cursor to Conf 2.0.9A & double click on it
2 of 8
Using a serial port cable connect the
computer to the lower control box
This reads all of the values that are stored in the control box & brings them to the
computer & allows you to make adjustment to them
3 of 8
Move cursor to the function
you want to look at or make
an adjustment to
Write down the Build Delay & Pump Speed for these functions:
Primary Boom Up & Down
Secondary Boom Up & Down
Jib Boom Up & Down
Also write down the Speed Values for these functions:
Primary Down
Secondary Down
Jib Down
You will use these values after you load in a new program
These values vary in each machine
Speed Values
Build delay
Pump speed
Go to Update Program
4 of 8
A Warning will appear
Click on Yes
5 of 8
Highlight the proper program
then click on Open
6 of 8
Use the Rabbit/Turtle buttons to scroll
through the models
Then select the model by pressing the
Mid-Speed buttons together
7 of 8
After selecting all of the options
that the machine has on it.
Go to Controller/Write
This will Enable the options you
have selected
8 of 8