Sardar Vallabhbhai National Institute of Technology
Tutorial-3 Subject: Process Modeling and Simulation (CH306) Total Marks: 25 Question 1. Consider the tank of figure 1 where two solutions 1 and 2 containing materials A and B are being mixed. Stream 1 has flow rate F1 (m3/s), density ρ1 (kg/m3), T1 (K), 1. concentration CA1 (mole/m3) and CB1 (mole/m3) of material A and B. Similarly stream 2 has flow rate F2 (m3/s), density ρ2 (kg/m3), T2 (K), concentration CA2 (mole/m3) and CB2 (mole/m3) of material A and B. The effluent stream has flow rate Fo (m3/s), density ρo (kg/m3), To (K), concentration CAo (mole/m3) and CBo (mole/m3) of material A and B. We assume that the mixing releases heat of rate Q (J/s) which is absorbed by a cooling fluid flowing in a jacket or a coil. Develop a model for the mixing process.