Professional Documents
Culture Documents
Rating
Rating
General Instruction:
Given the necessary tools, materials and equipment, you are required
Specific Instructions
CABDIDATES SIGNATURE
ASSESSORS SIGNATURE
Trainee’s Name
Facilitator’s Name MONROEWELL C. FAJARDO
Qualification TECHNICAL DRAFTING NCII
DATE OF ASSESSMENT
Unit of competency PREPARE COMPUTER-AIDED
DRAWING
Given the necessary tools, materials and equipment, you are required
1. DRAFT ARCHITECTURAL LAYOUT AND DETAILS
2. PREPARE COMPUTER-AIDED DRAWING
3. DRAFT STRUCTURAL LAYOUT AND DETAILS
YES NO N/A
Name of Trainee:
Name of Trainer:
Qualification
Unit of competency
General instruction: Given the necessary tools, materials and equipment,
you are required to perform Service Industrial Electronic Modules, Products
and System with the following standard and procedure within 2 hours.
Specific instruction
1. Prepare the unit and required materials, tools equipment and
workplace property for installation and service
2. Acquire manuals and service information required for
installation
3. Verity repair/maintenance history 4
4. Conduct complete check-up of consumer electronic products and
system, and identifies, verifies and documents detects against
costumer description
5. Test devices in accordance with standard procedures
6. Install consumer electronic products and systems
7. Undertake final inspection
8. Respond to unplanned events or conditions
9. Prepare report on installation and testing equipment
10. Identity system defects/Faults using appropriate tools and
equipment.
11. Diagnose faults and defects
12. Check and isolate circuits
13. Explain identified defects and faults
14. Check control setting/adjustments
15. Document accurately results of diagnosis and testing
16. Advise/Inform costumers regarding the status and serviceability
of the unit.
17. Replace defective parts/components with identical or
commented appropriate equivalent rating
18. Maintain /Repour consumer electronic products
19. Use's personal protected equipment
20. Perform clearing of unit
21. Perform repair activity within timeframe
22. Observe care and extreme precum in handling the unit/product
23. Re-assembled and test repaired cous electronic product
QUESTIONING TOOL
Satisfactory
Questions to probe the candidate’s underpinning knowledge
response
Extension/Reflection Questions Yes No
1. Why you need to confirm the problem of the circuit
2. why that there’s I need to use appropriate tools in testing
components?
Safety Questions
3. what is the important of knowing the right tool in a specific
job?
4. what is the important of using safety procedures in
measuring and checking a component?
Contingency Questions
5. What will you do if in case that you have a disrespect
costumer?
6. What will you do if you have a unit you don’t know the
defective parts?
Job Role/Environment Questions
7. How will you react when somebody complains you that your
service us technician is not good?
8. How can you tell in the costumer of the status of their unit
that there’s a component will be replace?
Rules and Regulations
9. As a rule testing components you must follow the
procedures in a proper way, explain why.
10. Safety precaution must be observe in working
The candidate’s underpinning Satisfactory Not
knowledge was: Satisfactory
Note: In the remarks section, remarks may include for repair, for
replenishment, for reproduction, for maintenance etc.