Professional Documents
Culture Documents
Revised 01/12
Surface Preparation
Proper inspection and preparation of the substrate to receive
resinous material is critical. Read and follow the “Instructions for
Concrete Surface Preparation” (Form G-1) for complete details.
continued on back
General GP3579
y Polymers® Standard Epoxy
Floors
Primer/ Binder
s Part A GP3579 Series
Part B GP3579B01 Standard Hardener
Product Information
Application Cleanup
Clean up mixing and application equipment immediately after
• APPLICATION INSTRUCTIONS
use. Use toluene or xylene. Observe all fire and health precau-
1. Add 2 parts 3579A (resin) to 1 part 3579B (hardener) by volume. tions when handling or storing solvents.
Mix with low speed drill and Jiffy blade for three minutes and until
uniform. To insure proper system cure and performance, strictly
follow mix ratio recommendations. Safety
Refer to the MSDS sheet before use.
2. 3579 may be applied via spray, roller or brush. Apply evenly,
with no puddles. Coverage will vary depending upon porosity of Published technical data and instructions are subject to change
without notice. Contact your Sherwin-Williams representative
the substrate and surface texture. for additional technical data and instructions.
3. 3579 application varies upon usage.
Maintenance
NOTE: Epoxy materials may tend to blush at the surface especially
Occasional inspection of the installed material and spot repair
in humid environments. After the surface is primed and before can prolong system life. For specific information, Contact your
installation of each subsequent coat, surface must be examined Sherwin-Williams representative.
for blush (a whitish greasy film and/or low gloss). The blush must
be completely removed prior to recoating using warm detergent Shipping
water or through solvent wipe. • Destinations East of the Rocky Mountains are shipped F.O.B.
Cincinnati, Ohio.
Epoxy materials will appear to be cured and dry to touch prior
to full chemical cross linking. Allow epoxy to cure for 2-3 • Destinations West of the Rocky Mountains are shipped F.O.B.
days prior to exposure to water or other chemicals for best Victorville, California.
performance. For specific information relating to international shipments, contact
your local sales representative.
www.sherwin-williams.com/protective