Professional Documents
Culture Documents
K88 P6 000Z 06 MIR TLE 683 0097 00 Reply
K88 P6 000Z 06 MIR TLE 683 0097 00 Reply
submittal and found to be matching. Quantities and area of applications shall be as per approved drawings.
- Comply with DAR comments on attached approved MAT.
- Warranties and spare parts shall be submitted.
Najm Eltayeb
11/01/2024
Sample Other
Manufacturer / Supplier :
Company Name : Nexans Local Agent : Specialized Security Services
Address :
Delivery information :
Availability
Locally Manufactured Overseas
Submitted by :
Ramil Veloria Document Control
Reviewed by
Action Code:
A: Reviewed - Work may proceed;
B: Reviewed with comments. Work may proceed subject to incorporation of comments
C: Objection - Revise and resubmit. Work may not proceed;
D: Rejected
Special Instructions :
DAR comments:
1- Proposed materials are technically accepted, however, Contractor shall obtain CPPA IT depart. approval of this
proposal, and its integration to the existing systems.
2- Submit the related shop drawings for approval accordingly.
MATERIAL SUBMITTAL
FOR
Structure Cable for Perimeter Intrusion System
REV-02
K88-P6-000Z-06-MAT-TLE-683-0010-02
Description:
Project Name: Material Submittal for Structure Cable for Document Reference No:
K88, Riyadh, Kingdom of Saudi Arabia Perimeter Intrusion System REV-02
1- Fiber optic patch cords shall be LC/UPC (SM and MM), LC/APC (SM), update as per project
specifications, comply accordingly.
As per UPC solution, UPC adapters and pigtails have been proposed.
3- Compliance statement shall be very accurate describing the actual compliance of the proposed
item to the project specifications.
Please refer page# onwards for the Compliances approved and Stamped by Nexan.
All the datasheets have been provided earlier, reattaching for your reference
We ask Nexan Factory for samples, and it will take them three months to prepare them.
For your reference, the proposed materials in this transmittal have previously been employed in
phase 1 of the royal area project.
6- Clarify why regular patch panels are proposed vs intelligent ones as per project specifications.
We are complying with the horizontal cable for Non-Data Center that is calling for regular Patch
panel as per the scope of work. Ref: Section 271000 Part 2, 2.2
Description:
Project Name: Material Submittal for Structure Cable for Document Reference No:
K88, Riyadh, Kingdom of Saudi Arabia Perimeter Intrusion System REV-02
3
Description:
Project Name: Material Submittal for Structure Cable for Document Reference No:
K88, Riyadh, Kingdom of Saudi Arabia Perimeter Intrusion System REV-02
3. TABLE OF CONTENT
Description:
Project Name: Material Submittal for Structure Cable for Document Reference No:
K88, Riyadh, Kingdom of Saudi Arabia Perimeter Intrusion System REV-02
Table of Contents
4. PREVIOUS APPROVAL
7
8
DESCRIPTION FOR THE SCOPE OF WORK
9
Description:
Project Name: Material Submittal for Structure Cable for Document Reference No:
K88, Riyadh, Kingdom of Saudi Arabia Perimeter Intrusion System REV-02
5. MATERIAL LIST
Description:
Project Name: Material Submittal for Structure Cable for Document Reference No:
K88, Riyadh, Kingdom of Saudi Arabia Perimeter Intrusion System REV-02
MATERIAL SUBMITTAL
S.No DESCRIPTION MAKE MODEL
1 LANmark-OF UC 6x Singlemode 9/125 OS2 PE Black Nexans N164.UCPE06B
LANmark Industry modular iConnect box DIN-Rail mount for 6
2 Snap-In- Fiber Nexans N42i.101
3 LAN mark-OF Duplex LC Snap-ln Adaptor singlemode Nexans N205.627
LANmark-OF Pigtail LC/UPC Singlemode Maxistrip LSZH 9/125
4 1m Yellow Nexans N121.4MLY
LANmark-OF ENSPACE Patch Cord DLC-DLC OM4 LSZH xm
5 Aqua Nexans N122-7UUAx
LANmark-OF Slimflex Patch Cord DLC/UPC - DLC/UPC SM LSZH
6 Yellow X m Nexans N122-4LLYX
7 LANmark-OF Fibre Organiser 10X Nexans N890-070
8 LANmark-OF LC Cleaning Tool Nexans N890-122
9 LANmark-OF Cable Gland Rubber Boot 20 mm 10X Nexans N890-148
LANmark-OF Plug&Play Patch Panel Integrated Cord Guide
10 Sliding Black Nexans N439-3MPP
11 LANmark-OF Adaptor Plate 12 LC Singlemode Blue Nexans N205-ALC12SMB
12 LANmark-OF Splice Cassette Heat Shrink Protectors Nexans N890.090
13 LANmark-OF Splice Cassette Cover Nexans N890.092
14 LANmark-OF Fusion Splice Heat Shrink Protection 100x Nexans N890.021
15 LANmark-OF Plug&Play Blank Filler 5X Nexans N441-2MBP
LANmark Industry S/FTP AWG23 Cat 6A LSZH+PE Black 500m
16 reel Nexans N10i.055-ODKF
LANmark-6A Evo Snap-In Connector Category 6A 500MHz
17 Screened Nexans N420.66A
LANmark-6A Ultim Patch Cord Cat 6A Screened LSZH 1m
18 Orange Nexans N11A.U1F010OK
19 LANmark Industry Field Terminable Plug Cat 6A Nexans N42i.900
Description:
Project Name: Material Submittal for Structure Cable for Document Reference No:
K88, Riyadh, Kingdom of Saudi Arabia Perimeter Intrusion System REV-02
6. DATA SHEETS
LANmark-OF UC PE (Unitube Steel Armoring -
Outdoor)
LANmark-OF UC 6x Singlemode 9/125 OS2 PE Black
DESCRIPTION
Description and Application
The construction is suitable for use outdoor in ducts and for direct burial. It consists of
a corrugated steel tape armouring providing full rodent protection. It is surrounded by
glass yarns. The cable has a HDPE outer jacket.
The loose tube design has a capacity of up to 24 fibres. Diameter of the fibres is 250
um. Termination of these fibres is done with splicing of pigtails.
The cable is watertight due to the gel in the loose tube and the watertight glass yarns.
Construction
Mechanical resistance to Static bending rad. Min. dynamic operating Ambient installation T°C Operating temp. Storage temperature,
impacts 130 mm bending rad. range -40 ... 70 °C range
3 impacts of 5 N.m 180.0 mm 0 ... 40 °C -40 ... 70 °C
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 1 / 2
LANmark-OF UC PE (Unitube Steel Armoring -
Outdoor)
LANmark-OF UC 6x Singlemode 9/125 OS2 PE Black
CHARACTERISTICS
Construction characteristics
Fiber optic type SM (G657.A1)
Dimensional characteristics
Number of optical fibres 6
Nominal outer diameter 8.5 mm
Approximate weight 85 kg/km
Mechanical characteristics
Maximum pulling force (IEC 60794-1-2-E1) 1500 N
Maximum operating pulling force 450 N
Mechanical resistance to impacts 3 impacts of 5 N.m
Crush resistance (IEC 60794-1-E3) 300 N/cm
Usage characteristics
Minimum static operating bending radius 130 mm
Minimum dynamic operating bending radius 180.0 mm
Ambient installation temperature, range 0 ... 40 °C
Operating temperature, range -40 ... 70 °C
Storage temperature, range -40 ... 70 °C
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 2 / 2
LANmark Industry DIN-Rail Outlets and boxes
LANmark Industry modular iConnect box DIN-Rail mount for 6 Snap-In
DESCRIPTION
Application
With the deployment of industrial Ethernet, users are installing data networks in
industrial areas. The LANmark Industry iConnectBox allows a modular deployment of
copper RJ45 /GG45 and fibre optic LC and SC Snap-In connectors in industrial
cabinets fitted with a 35mm DIN-Rail. It can be directly locked on the DIN-Rail or
screwed on the side onto a wall.
The LANmark Industry iConnectBox is ideal for areas with restricted space. It allows
for high density. It offers strain release possibilities, large access to the connectors,
easy cable entry for both copper and fibre optic cables.
The LANmark Industry iConnect box can be fitted with splice trays thus supporting
direct fibre optic termination, splicing and pre-termination.
Type of cables
Mechanical resistance to Electro magnetic interference Minimum operating Maximum operating Water proof RoHS compliant
impacts resistance temperature temperature No Yes
Low No 0 °C 70 °C
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 1 / 3
LANmark Industry DIN-Rail Outlets and boxes
LANmark Industry modular iConnect box DIN-Rail mount for 6 Snap-In
Connectivity
Copper Connectivity
• LANmark-5
• LANmark-6 /6A
• LANmark-7 /7A
• SC-Simplex
• SC-Duplex
• LC-Duplex
Splice trays
Mechanical resistance to Electro magnetic interference Minimum operating Maximum operating Water proof RoHS compliant
impacts resistance temperature temperature No Yes
Low No 0 °C 70 °C
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 2 / 3
LANmark Industry DIN-Rail Outlets and boxes
LANmark Industry modular iConnect box DIN-Rail mount for 6 Snap-In
CHARACTERISTICS
Construction characteristics
Connector type Snap-In
Screen Yes
Cable entry From the bottom
Colour Black
Material Steel
Dimensional characteristics
Length cable end on inner side 120 mm
Number of cables 6
Height 150 mm
Width 50 mm
Depth 104 mm
Wall thickness 1.6 mm
Approximate weight per piece 0.35 kg
Dimensions of screw 3.0mm
Number of screws 2
Electrical characteristics
Maximal operating frequency 0 MHz
Characteristic impedance 0 Ohm
Mechanical characteristics
Mechanical resistance to impacts Low
Usage characteristics
Component function Cabling and Connectivity solutions
Field of application Industrial installations
Number of ports 6
Category N/A
Electro magnetic interference resistance No
Packaging Plastic bag
Minimum operating temperature 0 °C
Maximum operating temperature 70 °C
Water proof No
RoHS compliant Yes
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 3 / 3
LANmark-OF Snap-In Adaptor
LANmark-OF Duplex LC Snap-In Adaptor Singlemode
DESCRIPTION
LANmark-OF Snap-In adaptors have been designed for installation into the LANmark-
OF snap-in panels, ZD boxes and outlets. They are available in single SC, duplex SC
and duplex LC duplex. The multimode adaptors are aqua, the singlemode adaptors
are blue while the singlemode APC adaptors are green. Installation time is saved as
the snap-in concept replaces the time-consuming screwing attachment of the
traditional adaptors.
STANDARDS
International ISO/IEC 11801
CHARACTERISTICS
Construction characteristics
Connector type LC
Colour Blue
Transmission characteristics
Insertion Loss, maximum, dB 0.4 dB
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 1 / 1
LANmark-OF Pigtails Maxistrip
LANmark-OF Pigtail LC/UPC Singlemode Maxistrip LSZH 9/125 1m
Yellow
DESCRIPTION
Pigtail characteristics
• Fibre assembly to terminate cable with fusion splicing
• Suitable for use in patch panels using splice cassettes.
• The pigtails can be stripped in one action over a long distance up to 100cm.
Fibre type
• Maxistrip pigtails are compatible with heat shrink splice cassettes (N890.090 and International ISO/IEC 11801
N890.095) with heat shrink protectors (N890.021).
• Maxistrip pigtails are compatible with splice cassettes (N890.091 and N890.096)
with Aluminium protectors (N890.021).
• Maxistrip pigtails are recommended to be used with loose tube cables or Micro-
Bundle cables, i.e. with 250 um fibres. When using tight buffer cables (900 um
fibres) additional stress on the maxistrip pigtails should be limited as much as
possible
• For proper alignment in the fusion splice tool the pigtail is fixed on the 250 um
coating after stripping the 900 um coating. Fixing the pigtail on the 900 um coating
will lead to improper alignment.
• In addition the pigtail needs to be stripped till the cladding around the splice area
before insertion in the splice tool.
Guarantuees
Nexans LANmark-OF pigtails are covered by Nexans warranty as described in the
General Terms and Conditions.
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 1 / 2
LANmark-OF Pigtails Maxistrip
LANmark-OF Pigtail LC/UPC Singlemode Maxistrip LSZH 9/125 1m
Yellow
CHARACTERISTICS
Construction characteristics
Connector type LC
Fiber optic type SM (G657.A1)
Transmission characteristics
Insertion Loss, maximum, dB 0.25 dB
Return Loss, Minimum, dB 50 dB
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 2 / 2
LANmark-OF ENSPACE Patch Cord Duplex LC
LANmark-OF ENSPACE Patch Cord DLC-DLC OM4 LSZH xm Aqua
DESCRIPTION
Optimised for data centres environments
LANmark-OF ENSPACE patch cords have a very small bend radius of 10 mm due to
the use GIGAliteFLEX bend insensitive fibre.
The small bend radius of the patch cord is beneficial in high density patching areas
where a lot of bends are common. There is a high risk that the larger bend radius (40
mm) of traditional patch cords is not maintained resulting in high attenuation and loss
of transmission.
The round design of the ENSPACE patch cord results in a small bend radius in any
direction. Traditional patch cords based on a zipcord design have a bend radius that is
dependent on the orientation.
With the round design and the small diameter (2mm) of the patch cable the area
required for the patch cord is reduced by 50 % resulting in space savings, reduced STANDARDS
disturbance of the airflow for cooling and easier patch cords management in high
density racks. International ISO/IEC 11801
For the support of the advanced high speed Ethernet protocols with stringent power
budgets the ENSPACE patch cord features a low loss performance of 0.25 dB. This
increases the headroom in the channel and reduces the risk of down time.
Characteristics
• Patch cord cable is according to IEC 60794-2-50
• Maximum insertion loss according to IEC 61300-3-4: 0.25 dB
• Typical insertion loss: 0.125 dB
• A label is added close to the uniboot connector for traceability of the measurement
results
Fibre type
The LANmark-OF OM4 patch cords have LANmark-OF OM4 GIGAliteFLEX fibre
inside. This bend insensitive multimode fibre has a small bend radius and is compliant
to IEC 60793-2-10, fibre model A1a.3b.
Mechanical resistance to impacts Flame retardant Static bending rad. Operating temp.
10 impacts of 1 N.m IEC 60332-1 10 mm -20 ... 60 °C
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 1 / 3
LANmark-OF ENSPACE Patch Cord Duplex LC
LANmark-OF ENSPACE Patch Cord DLC-DLC OM4 LSZH xm Aqua
Design
Nexans LANmark-OF patch cords are delivered according to the "Cross-Over" wiring
principle to improve field installation (A1-B2, B1-A2). This complies to the requirements
of IEC 11801 and EN 50174-1:2009.
The polarity of the ENSPACE patch cord can be changed by opening the uniboot
connector on one side and change the position of the 2 LC connectors. A black and
yellow plastic square identify the fibre inside the patch cord. The patch cords are
delivered with the black square on the left on side A and on the right on side B. This is
required for cross-over or optical crossed patch cords. By changing the position of the
black square on side A from the left to the right the patch cord becomes an optical
straight patch cord. This straight patch cord can be used for some rare legacy
applications that have a non-standard polarity.
CHARACTERISTICS
Construction characteristics
Armour type Aramid yarn
Colour Aqua
Connector type Duplex LC-LC
Fiber optic type OM4 50/125
Outer sheath LSZH-FR
Dimensional characteristics
Outer Diameter 2 mm
Transmission characteristics
Insertion Loss, maximum, dB 0.25 dB
Return Loss, Minimum, dB 30 dB
Mechanical characteristics
Crush resistance (IEC 60794-1-E3) 100 N/cm
Maximum pulling force (IEC 60794-1-2-E1) 100 N
Mechanical resistance to impacts (IEC 60794-1-E4) 10 impacts of 1 N.m
Mechanical resistance to impacts Flame retardant Static bending rad. Operating temp.
10 impacts of 1 N.m IEC 60332-1 10 mm -20 ... 60 °C
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 2 / 3
LANmark-OF ENSPACE Patch Cord Duplex LC
LANmark-OF ENSPACE Patch Cord DLC-DLC OM4 LSZH xm Aqua
Usage characteristics
Flame retardant IEC 60332-1
Minimum static operating bending radius 10 mm
Operating temperature, range -20 ... 60 °C
Mechanical resistance to impacts Flame retardant Static bending rad. Operating temp.
10 impacts of 1 N.m IEC 60332-1 10 mm -20 ... 60 °C
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 3 / 3
LANmark-OF Slimflex Patch Cords Singlemode
LANmark-OF Slimflex Patch Cord DLC/UPC - DLC/UPC SM LSZH Yellow
Xm
DESCRIPTION
Guarantees and installation
Nexans LANmark-OF optical fibre patch cords have been designed for indoor
applications in support of high speed protocols.
High speed protocols supported include, but are not limited to Ethernet 1GBase-LX
and Ethernet 10GBase-LR
Characteristics
• Patch cord cable is according to IEC 60794-2-50 STANDARDS
• Maximum insertion loss according to IEC 61300-3-4: 0.25 dB
International ISO/IEC 11801
• Typical insertion loss: 0.1 dB
• Minimum return loss according to IEC 61300-3-6 for LC/UPC: 50 dB
• Minimum return loss according to IEC 61300-3-6 for LC/APC: 65 dB
• Duplex LC-LC, duplex LC-SC and duplex SC-SC patch cords have a duplex cable
construction with a diameter of 2 X 2.0 mm.
• Short connector boots of 19mm
• Small bend radius: 10 mm
• A traceability label is added close to the connector
Fibre type
The LANmark-OF SM patch cords have LANmark-OF SM GIGAliteFLEX fibre inside.
These fibres are bend insensitive and compliant to ITU-T G.657.A1 and to IEC
60793-2-50, fibre model B6.a1. The pigtail jacket of the singlemode pigtails is yellow.
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 1 / 3
LANmark-OF Slimflex Patch Cords Singlemode
LANmark-OF Slimflex Patch Cord DLC/UPC - DLC/UPC SM LSZH Yellow
Xm
Design
Nexans LANmark-OF patchcords designed according to the "Cross-Over" wiring
principle to improve field installation (A1-B2, B1-A2). This conforms to the
requirements of IEC 11801 and EN 50174-1:2009.
The "butterfly" duplex clip allows to change the polarity on site easily by simply
removing the 2 connectors and put them in a reverse order back into the same clip. No
tool is required for this polarity change.
CHARACTERISTICS
Construction characteristics
Armour type Aramid yarn
Colour Yellow
Connector type Duplex LC-LC
Fiber optic type SingleMode 9/125
Outer sheath LSZH-FR
Dimensional characteristics
Width 4 mm
Height 2 mm
Nominal inner diameter 2.0 mm
Transmission characteristics
Insertion Loss, maximum, dB 0.25 dB
Return Loss, Minimum, dB 50 dB
Mechanical characteristics
Crush resistance (IEC 60794-1-E3) 100 N/cm
Maximum pulling force (IEC 60794-1-2-E1) 200 N
Usage characteristics
Flame retardant IEC 60332-1
Minimum static operating bending radius 10 mm
Operating temperature, range -10 ... 50 °C
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 2 / 3
LANmark-OF Slimflex Patch Cords Singlemode
LANmark-OF Slimflex Patch Cord DLC/UPC - DLC/UPC SM LSZH Yellow
Xm
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 3 / 3
LANmark-OF Fibre Accessories
LANmark-OF Fibre Organiser 10X
DESCRIPTION
The LANmark-OF Fibre Organiser consists of a support base and 4 rings for improved
fibre management.
The screws and washers to fix the organisers inside the patch panel are included.
STANDARDS
International ISO/IEC 11801
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 1 / 1
LANmark-OF Cleaning Tools
LANmark-OF LC Cleaning Tool
DESCRIPTION
• Dry cloth cleaning tool with cleaning micro fibres. Fibres are densely stranded and
debris free.
• Highly effective at removing oil and dust contaminants that can negatively impact
optical performance.
• Designed for LC connectors.
• Dust cap of the cleaner acts as an adaptor for cleaning unmated connectors.
• To clean single fibre connectors residing in an adaptor.
• Extendable tip reaches recessed connectors.
• Simple to use.
• Easy pushing motion engages and initiates cleaning.
• Disposable with 525+ cleanings per unit.
• Cleaning rotates 180° for a full sweep.
• Audible click when engaged.
STANDARDS
International ISO/
IEC 11801:2002/Amd 1:2008/
Cor 1:2008
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 1 / 1
LANmark-OF Fibre Accessories
LANmark-OF Cable Gland Rubber Boot 20 mm 10X
DESCRIPTION
The cable gland allows to fix cables with a diameter between 4.3mm and 7.8mm.
The cable gland fits in patch panels with a slot size of 20mm or PG13.5.
The rubber boot provides additional cable protection beyond the cable gland.
Compared to a typical spiral boot the rubber boot can not be stuck behind the panel
when the tray of the panel is pulled forward. The length of the boot is 85mm.
STANDARDS
International ISO/IEC 11801
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 1 / 1
LANmark-OF Plug&Play Patch Panels
LANmark-OF Plug&Play Patch Panel Integrated Cord Guide Sliding
Black
DESCRIPTION
The Nexans' Plug and Play concept is specifically designed for installation in data
centres where the high density, integrated patch cord guide and enhanced installation
benefits of the patch panel meet the key requirements for implementation.
The Nexans unique patch panel design allows to hold up to 4 Plug&Play adaptor
plates in 1U of the distribution rack. Depending on the type of the module a high
density of up to 96 fibre connections can be accommodated.
The new patch cord guide sits in front of the modules and allows the patch cords to be
managed within the same 1U saving expensive rack space. The patch cord guide also
provides a labelling facility to identify connections. Additional labelling is provided by
printed port numbers on the modules.
The newly developed tray slides and tilts for improved access to install new modules
and adaptor plates.
STANDARDS
The patch panel is optimised for installation of the LANmark-OF SC/LC Pre-Term
Trunks. The cable glands of the Pre-Term allow a fast and solid fixing of the cable. International ISO/IEC 11801
There is ample space inside the patch panel to organise the flexible fan-out of the Pre-
Term.
The LANmark-OF Fibre Organiser (N890.070) fits in the patch panel to facilitate the
installation of the SC/LC Pre-Term.
Inside the patch panel the following splice cassettes can be installed:
For information regarding the possible combinations for splice cassettes, maxistrip/
tight buffer pigtails and cables please consult the installation guide.
Panels are fully painted in black for a professional look and feel. Blank fillers
(N441.2MBP) are available as separate accessories for unused positions to give a
finished look.
The front adaptor plate can be fixed in a flush or recessed position in the rack using
the adjustable side brackets. When the panel is installed recessed the distance
between the rack vertical and the rear of the panel is 288 mm. The front cord
management projection is 67 mm. When the panel is installed flush the distance
between the rack vertical and the rear of the panel is 248 mm. The front cord
management projection is 107 mm.
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 1 / 1
LANmark-OF Plug&Play Adapter Plates
LANmark-OF Adaptor Plate 12 LC Singlemode Blue
DESCRIPTION
Application
The adaptor plates are designed for a fast installation inside the Nexans Plug&Play
panels. They allow a wide range of connectivity options. A mix of different adaptor
types and a combination of singlemode and multimode within the same panel is
possible.
Compatibility
The adapter plates are installed in the LANmark-OF Plug&Play Patch panels
(N439.3MPP). Up to 4 adapters plates can be installed into one patch panel.
CHARACTERISTICS
Construction characteristics
Connector type LC
Fiber optic type SingleMode 9/125
Colour Blue
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 1 / 1
LANmark-OF Splice Cassettes
LANmark-OF Splice Cassette Heat Shrink Protectors
DESCRIPTION
Family of patch panel accessories for termination of cable when using fusion splicing
techniques.
The cassette protects the fusion splices and holds them in position.
The splice cassettes with heatshrink protectors can be used for both 250 and 900 µm
coated fibres. Hence these cassettes are compatible with LANmarkOF Tight Buffer,
Loose Tube and MicroBundle cables. Splicing with heat shrink protectors can also be
used for both LANmarkOF Maxistrip and Tight Buffer Pigtails.
The cassettes have 12 splice positions. When using LANmarkOF Maxistrip Pigtails 2
protectors can be stacked on top of each other increasing capacity to 24 splices per
cassette.
The Nexans fibre panels can hold up to 4 splice cassettes and only the top splice
cassette needs a cover.
The large splice cassettes (N890.090, N890.091 and N890.092) can be installed in the
LANmarkOF patch panels (N439.*) and LANsenseOF sliding preloaded patch panels
(N883.2B*).
STANDARDS
The splice cassettes are fixed to each other at the back of the cassettes with the
provided hinges. This feature facilitates the inspection after installation since the International ISO/IEC 11801
cassettes can be lifted and tilted.
The cassette facilitates 2 rings of routing: an inner ring for the fibres of the pigtails and
an outer ring for the fibres of the cable.
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 1 / 1
LANmark-OF Splice Cassettes
LANmark-OF Splice Cassette Cover
DESCRIPTION
Family of patch panel accessories for termination of cable when using fusion splicing
techniques.
The cassette protects the fusion splices and holds them in position.
The Nexans fibre panels can hold up to 4 splice cassettes and only the top splice
cassette needs a cover.
The large splice cassettes (N890.090, N890.091 and N890.092) can be installed in the
LANmark-OF patch panels (N439.*) and LANsense-OF sliding preloaded patch panels
(N883.2B*).
These splice cassettes are fixed to each other at the back of the cassettes with the
provided hinges. This feature facilitates the inspection after installation since the
cassettes can be lifted and tilted.
STANDARDS
International ISO/IEC 11801
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 1 / 1
LANmark-OF Splicing Accessories
LANmark-OF Fusion Splice Heat Shrink Protection 45mm 100x
DESCRIPTION
LANmark OF-accessories to complete the splicing system with heat shrink protectors
Lenght: 45mm
Compatible with tight buffer or loose tube cables, i.e. 250 and 900 um coated fibres.
Designed for LANmark-OF Splice Cassette Heat Shrink Protectors (N890.090 and
N890.095)
The heat shrink splice protector consists of a metal rod surrounded by a shrinkable
plastic.
The splice is inserted into the shrinkable plastic. After heating the plastic is well fixed
around the splice and the metal wire provides strength so that the splice is well
protected.
STANDARDS
International ISO/IEC 11801
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 1 / 1
LANmark-OF Plug&Play Patch Panels
LANmark-OF Plug&Play Blank Filler 5X
DESCRIPTION
The Nexans' Plug and Play patch panel can hold up to 4 MPO modules.
Often these 4 positions are not completely filled up at the start of a data center, but
kept for possible extensions in the rack.
The blind plates are then used to give the patch panel a finished look.
STANDARDS
International ISO/IEC 11801
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 1 / 1
LANmark Industry Copper cables
LANmark Industry S/FTP AWG23 Cat 6A LSZH Dca Orange + PE Fca
Black 500m reel
DESCRIPTION
Specification
The high performing LANmark Industry S/FTP LSZH + PE cables meet or exceed all
Category 6A parameters. They comply with the electrical and mechanical requirements
of the ISO/IEC 11801-3:2017 standard for industrial premises and with the MICE rating
for environmental conditions.
When terminating the cable with LANmark-6A connectors, the Class EA Permanent
Link requirements of ISO/IEC 11801 are met.
Application
• 10Base-T,
• 100 Base-T
• 1GBase-T
• 10GBase-T
• Industrial Ethernet
Halogen free Lead free Flame retardant Operating temp. Ambient installation T° Electro magnetic RoHS compliant
Yes Yes IEC 60332-1 -20 ... 70 °C C range interference resistance Yes
-5 ... 70 °C Yes
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 1 / 3
LANmark Industry Copper cables
LANmark Industry S/FTP AWG23 Cat 6A LSZH Dca Orange + PE Fca
Black 500m reel
Screening
• 10mOhm/m at 1 MHz
• 10mOhm/m at 10 MHz
• 30mOhm/m at 30 MHZ
• 60mOhm/m at 100 MHz
Halogen free Lead free Flame retardant Operating temp. Ambient installation T° Electro magnetic RoHS compliant
Yes Yes IEC 60332-1 -20 ... 70 °C C range interference resistance Yes
-5 ... 70 °C Yes
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 2 / 3
LANmark Industry Copper cables
LANmark Industry S/FTP AWG23 Cat 6A LSZH Dca Orange + PE Fca
Black 500m reel
CHARACTERISTICS
Construction characteristics
Type of cable S/FTP
Individual screen Aluminium / Polyester tape
Overall screen Tinned copper braid
Inner sheath Low smoke, zero halogen thermoplastic
compound
Outer sheath PE
Sheath colour Orange / Black
Halogen free Yes
Lead free Yes
Dimensional characteristics
Number of pairs 4
Conductor cross-section (AWG/KCMIL) 23
Diameter over insulation 1.2 mm
Outer Diameter 8.6 mm
Approximate weight 66 kg/km
Electrical characteristics
Maximal operating frequency 600 MHz
Characteristic impedance 100 Ohm
Max. DC resistance of the conductor at 20°C 95 Ohm/km
Mutual capacitance 56 nF/km
Transmission characteristics
Nominal Velocity of Propagation (NVP) 82 %
Skew 25 ns/100m
Propagation delay, max. 100 MHz 535 ns/100m
Coupling attenuation at 30 MHz 80 dB
Mechanical characteristics
Maximum permanent tensile load 0.1 kN
Maximum pulling force by laying 0.12 kN
Usage characteristics
Field of application Fixed installations
Packaging Reel
Length 500 m
Fire load 700 MJ/km
Flame retardant IEC 60332-1
Operating temperature, range -20 ... 70 °C
Ambient installation temperature, range -5 ... 70 °C
Category Cat. 6A
Minimum Bend Radius - During Installation (under Tension) 130 mm
Minimum Bend Radius - Installed 86 mm
Silicone free Yes
Electro magnetic interference resistance Yes
RoHS compliant Yes
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 3 / 3
LANmark-6A Snap-In Connector
LANmark-6A Evo Snap-In Connector Category 6A 500MHz Screened
DESCRIPTION
Application
Nexans LANmark-6A Evo Snap-In Connectors are manufactured and tested to the
latest Category 6A specifications defined in the International and American cabling
standards and are designed to meet or exceed the stringent quality and performance
criteria needed to support all applications up to 500 MHz, including 10 Gigabit
Ethernet.
A fully closed metal rear cover providing 360 degrees shielding offers excellent
coupling attenuation and ensures immunity from Alien Crosstalk and other external
STANDARDS
interferences. International EN 50173-1;
Channels built with LANmark-6A cables and jacks do not need on site testing for Alien IEC 60603-7-51;
Crosstalk, as this parameter is met by design. This significantly reduces the installation IEEE 802.3af (PoE);
cost for 10G network cabling. IEEE 802.3bt (PoE++);
IEEE 802.3at (PoE+); ISO/
• 10 BASE-T Ethernet IEC 11801:2002/Amd 1:2008/
• 100 BASE-T Fast Ethernet Cor 1:2008; ISO/IEC 24764; ISO/
• 1000 BASE-T Gigabit Ethernet IEC 11801:2002/Amd 2:2010/
• 10G BASE-T Gigabit Ethernet IEEE 802.3 Cor 1:2010
• 155 Mbit ATM
National ANSI/TIA-568-C.2
• 1.2 Gbit ATM
• PoE++ Type 4 (IEEE 802.3bt) including IEC 60512-9-3/ed.2 (test 9c) and IEC
60512-99-002/ed.1 draft (test 99b)
• Future Cat 6A and Class EA applications
Design
Nexans LANmark-6A Evo Snap-In connectors are designed to match with
LANmark-6A cable and patch cords and to complement all LANmark modular
components, such as:
• Snap-In patch panels (fixed, sliding and angled) and Zone Distribution Boxes
• Snap-In outlet modules (UK, US, European and German style)
Performance
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 1 / 3
LANmark-6A Snap-In Connector
LANmark-6A Evo Snap-In Connector Category 6A 500MHz Screened
Nexans LANmark-6A Evo connectors meet or exceed the requirements for Category
6A connecting hardware as described in ISO/IEC 11801, IEC 60603-7-51 and EIA/TIA
568-C.2.
In conjunction with LANmark-6A cable they support all 2, 3 and 4 connector models as
specified in these standards, as well as very short link and channel configurations
which are increasingly required in Data Centre environments.
Installation
The wire organiser guarantees fast and easy termination of the LANmark-6A Evo
Snap-In connector without the need for a punchdown tool. An optional comfort tool
(N420.567) can be used to increase the ease of installation.
A stranded version is available for CP to TO links.
Guarantees
The LANmark-6A Evo Snap-In performance is guaranteed to meet or exceed the
requirements of the above mentioned standards.
Installations with LANmark-6A cable and connectivity are qualified for a 25 year full
system warranty, which includes Parts, Installation, Channel Performance and
Application Support, as described in the Nexans Certified System Warranty.
CHARACTERISTICS
Construction characteristics
Connector type RJ45 and Tool-less IDC
Screen Yes
Dimensional characteristics
Height 23.2 mm
Depth 36.4 mm
Width 16.8 mm
Usage characteristics
Category Cat. 6A
Component function Connector
Range LANmark-6A
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 2 / 3
LANmark-6A Snap-In Connector
LANmark-6A Evo Snap-In Connector Category 6A 500MHz Screened
All values are based on Worst Case 4 Connector Channel configurations according to ISO11801.
Minimum and maximum values represent guaranteed Channel performance.
Standard values based on ISO11801 Class EA
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 3 / 3
LANmark-6A Ultim UniBoot Patch Cords
LANmark-6A Ultim Patch Cord Cat 6A Screened LSZH 1m Orange
DESCRIPTION
Application
LANmark-6A Ultim cords are developed to support 10 Gigabit Ethernet (IEEE 802.3an)
and any other future Cat.6A application.
LANmark-6A Ultim Cords offer superior performance up to 500MHz and are matched
with other LANmark-6A components to provide improved data throughput in complex
channel configurations. Ultim cords use stranded cable and as such provide maximum
system flexibility for the use at Cross Connects and Consolidation points.
They will also maximise the lifetime and longevity of the system by minimising the risk
of wear & tear damage. Due to their good electrical performance and mechanical
stability, LANmark-6A Ultim cords can be used for accurate field testing of Cat 6A
cabling channels. .
Ultim Cords feature a slim boot for mechanical protection, which is kept inside the STANDARDS
RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit.
International EN 50173-1;
They also come with a ‘Replaceable’ Latch Protector, which can be used for colour IEEE 802.3an; ISO/IEC 11801;
coding of different services. ISO/IEC TR24750
Guarantees
When installed in combination with other LANmark-6A components, a 25 years
channel warranty can be obtained, covering full 10GBase-T support and full Cat 6A/
Class EA compliance.
Flame retardant
IEC 60332-1
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 1 / 3
LANmark-6A Ultim UniBoot Patch Cords
LANmark-6A Ultim Patch Cord Cat 6A Screened LSZH 1m Orange
Usage
• The cords are by design fully Alien Crosstalk compliant, so no special installation
rules need to be taken into account for ANEXT and AFEXT compliance.
• 1, 2, 3, 5, 10, 20m are standard lengths available from stock, other lengths are
available on demand.
• Orange and Dark Grey are standard colours available from stock; other colours are
available on demand.
• Default Plug Configuration is a black boot with a preinstalled black latch protector.
CHARACTERISTICS
Construction characteristics
Colour Orange
Outer sheath LSZH
Screen Yes
Dimensional characteristics
Conductor cross-section (AWG/KCMIL) 26
Nominal outer diameter 6.0 mm
Electrical characteristics
Characteristic impedance 100 Ohm
Usage characteristics
Range LANmark-6A
Component function Patchcord
Category Cat. 6A
Flame retardant IEC 60332-1
Field of application Indoor
Length 1m
Mechanical durability/matings 750
Packaging Box of 50 items
Flame retardant
IEC 60332-1
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 2 / 3
LANmark-6A Ultim UniBoot Patch Cords
LANmark-6A Ultim Patch Cord Cat 6A Screened LSZH 1m Orange
All values are based on Worst Case 4 Connector Channel configurations according to ISO11801.
Minimum and maximum values represent guaranteed Channel performance.
Standard values based on ISO11801 Class EA
Flame retardant
IEC 60332-1
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 3 / 3
LANmark Industry Field Terminable Plugs
LANmark Industry Field Terminable Plug Cat 6A
DESCRIPTION
LANmark field terminable plugs are specifically designed to provide a quick, simple
and high quality method of termination on-site. They require no special tools and are
compatible with all cables in the LANmark range.
The Category 6A plug is designed for use with all Snap-In connectors and is
particularly suitable for use with the LANmark Industry DIN-rail connectors.
STANDARDS
International EN 50173-3; ISO/
IEC 24702
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 1 / 2
LANmark Industry Field Terminable Plugs
LANmark Industry Field Terminable Plug Cat 6A
CHARACTERISTICS
Construction characteristics
Material Plastic
Dimensional characteristics
External diameter of the cable "D", range 4.5 ... 9 mm
Usage characteristics
Category Cat. 6A
Maximum operating temperature 70 °C
Minimum operating temperature -40 °C
Resistance to vibrations High
All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Generated 9/10/23 www.aginode.net Page 2 / 2
Description:
Project Name: Material Submittal for Structure Cable for Document Reference No:
K88, Riyadh, Kingdom of Saudi Arabia Perimeter Intrusion System REV-02
9. HLD DRAWINGS
1 2 3 4 5 6
CONSULTANT:
DESIGNER:
OGER INTERNATIONAL
A A
CONTRACTOR:
MODERN ARCH
CLIENT:
CAT6A CAT6A
NOTES:
DATACENTER
B B
t (35mm)
For DIN-Rail moun
MODE L:N 42 i.1 01
1
HLD DRAWING
2 x 06 CORE SM FO CABLES NETWORK-1 26U
14 2
(MAIN & REDUNDANT)
TO DISTRIBUTION SWITCH 01
25U
2 x 06 CORE SM FO CABLES NETWORK-2 PASSIVE COMPONENT
(MAIN & REDUNDANT) 02 1 TO 14
TO DISTRIBUTION SWITCH 24U
PANTRY
OFFICE
WC
UP
H.C. ROOM
AREA-4
1U CABLE MANAGER
AREA-3
20U
AREA-2
AREA-1
20600
3050
6800
3550
3550 3650 AIR CONDITIONING
1750
6250
PLUMBING CORRIDOR
15400
5000
PLUMBING
2400
FOUNDATION
BATHROOM
BATHROOM
AIR CONDITIONING
MEN'S SERVANT
BEDROOM
BEDROOM
BEDROOM
BEDROOM
BEDROOM
BEDROOM
CRAWL SPACE CRAWL SPACE
LIFT
AIR FILTER
RM
AIR CONDITIONING
AIR CONDITIONING
HALLWAY
HALLWAY
LIFT
CORRIDOR
SAS
PLUMBING
STORAGE
STORAGE
EQUIP
EQUIP
LIFT
LIFT
KITCHEN
BEDROOM
MASTER BEDROOM
BATHROOM
WASH
TOI. TOI.
SERVERY
WASH
DINING
GARBAGE
TOI.
MEETING RM
DRESSING
DRESSING
BATH
FREEZER
COLD
HALL
MAIN HALL
HALLWAY
LIFT LOBBY
VESTIBULE
STORAGE
STORAGE
DISH WASH
WASH TOI.
DRESSING
KITCHEN
HALL
HM OFFICE
DRESSING
LIFT
LIFT
MASTER BEDROOM
STORAGE
BATH
LIFT
LOUNGE
(191.96)
BEDROOM
BATHROOM
SERVICE
CORR.
SERVICE
HALL
LIFT LOBBY
EQUIP
COLD
STORAGE
LIFT
AIR FILTER
STORAGE
24 No.S HORIZONTAL CAT6A CABLES
STRONG ROOM
LIFT
LIFT
RM
LC
EQUIPMENT
AIR CONDITIONING
STORAGE
HALLWAY
EMERGENCY EXIT
STORAGE
PLUMBING
HALLWAY
ELECT
BEDROOM
BEDROOM
BEDROOM
BEDROOM
BEDROOM
BEDROOM
BATHROOM
BATHROOM
BATHROOM
BATHROOM
2
HP01-A901
19U
T&B
BEDROOM
CORRIDOR
BEDROOM
T&B
DRESS BEDROOM
CORRIDOR
LOUNGE
DINING
PANTRY
CHEMI. RM T&B
T&B
GALLERY
PANTRY
DINING
CORRIDOR
LOUNGE
TECH'L
T&B BEDROOM L.C HC
CORRIDOR
T&B T&B
BEDROOM BEDROOM BEDROOM BEDROOM
SALON SALON
T&B BEDROOM
MECHANICAL ROOM
CORRIDOR
CORRIDOR
T&B CORRIDOR CORRIDOR T&B
GUARD'S POST
T&B L.C TOILET TOILET L.C
BEDROOM H.C H.C
BEDROOM BEDROOM
GENERAL
CHECKING GENERAL
CHECKING
AIR CONDITIONING
STAIR-2 T&B BEDROOM BEDROOM BEDROOM
PLUMB ENTRANCE ENTRANCE PLUMB
HOT WATER
PRODUCTION
CORRIDOR
STORAGE
OIL FILTER AMBULANCE
TECHNICAL
STORAGE
GALLERY
ACCESS TO DIWANIYAH
HALL FOR LADIES
T&W
LIFT DRESS
GUARD BEDROOM
STAIR-1
T&B
SALON CORRIDOR H.C.
PLUMBING
HALL PANTRY LOUNGE
SUBSTATION T&B
PANTRY BEDROOM-1 T&B BEDROOM-2 BEDROOM-3 T&B BEDROOM-4 BEDROOM-5 T&B BEDROOM-6 BEDROOM-7 T&B BEDROOM-8 BEDROOM-9 T&B BEDROOM-10
BEDROOM TECH'L
DRESS HC L.C HC HC
PLUM.
PLUM.
BATH. AC TECH'L PLUMB PANTRY ENTRAN. T&W T&W ENTRAN. PANTRY PLUMB TECH'L
PAN. TOI. LC LC
HC OFF.LC
GUARD'S POST
TROLLEY
BEDROOM OFFICE CLEAN
GUARDS DIWANIEH GUARDS DIWANIEH
CLEANING
ENTRANCE
(188.00) TOILETS
CONTROL
BATH PANTRY PANTRY BATH
CLOAK
BEDROOM BEDROOM S.A.S. ROOM
LAUNDRY
OFFICE
BEDROOM CHECKING CHECKING BEDROOM ENT. LOBBY
ENTRANCE LOBBY
BATH BATH PASTRY COOKING
FLOUR
PASTRY BAKE
SHOP DIVERS
COOKING BEDROOM BEDROOM DINING
DISH WASHING
DISH TOILET
STO. COLD PREPARATION AREA DRINK CENTRAL ROOM
STORAGE
UTENSIL VEGETABLE
GARBAGE WASH BUTCHERY VEGETABLE STORAGE
STORAGE
HALL COLD
CONTROL COOKING GROUP
MUTTON
OFFICE
HC
LC
T
P
1U CABLE MANAGER
PANTRY T&B T&W PANTRY
PABX RM.
T&B
HW
GUARD'S RM DRIVER'S LOUNGE LC
OPERATOR'S RM.
T
LC
HC
OFFICE
TECH.RM.
18U
OFFICE
STORAGE
T&W
MEZZANINE
UP UP
CORRIDOR
GENERATOR ROOM
ENTRANCE
T&W
OFFICE
SECURITY
GENERATOR CELLULE MT
OFFICE
DISTRIBUTION
DN
DN
STORAGE
TANK
PUMP ROOM
DN
12 4
OFFICE
T&W
R
TRANSFORME
LOCAL
ROOM
EQUIPMENT
24 No.S HORIZONTAL CAT6A CABLES HIGH SPEED RJ45 PACTH CORD TO RUN
ROOM
PUMP ROOM
CHILLERYARD
SUBSTATION
TECHNICAL ROOM
FROM DATA OUTLETS 17U 10GBASE-T AND FUTURE CAT6A APPLICATIONS
EXISTING TRENCH
EXISTING TRENCH
SUBSTATION
EXISTING TRENCH
MODEL:N11A.U1F010OK
11U
HIGH BANDWIDTH RJ45 CONNECTOR
SUPPORTING 10 GIGABIT
MODEL:N420.66A DRAWN BY CHECKED BY APPROVED BY
10U
NA NA NA
09U
Splice cassette cover PROJECT TITLE:
1U CABLE MANAGER MODEL:N890.092
08U
10 6
07U
1U CABLE MANAGER
K88_PROJECT
06U
05U
9 7 RIYADH, SAUDI ARABIA
1U CABLE MANAGER FOR INSTALLATION IN
04U INDUSTRIAL PREMISES
MODEL:N10i.005-ODKF 0000 SITE PLAN
8
03U AS-BUILT TITLE:
E PDU 1 E
02U HIGH LEVEL DESIGN
PDU 2
01U
K88-YAMAMA
OPTICAL FIBER PATCH CORDS
ICT SYSTEM
LANmark-OF accessories for splicing
MODEL:N122.5LLAX MODEL:N890.021
26U WALL MOUNTED TELECOM CABINET
XXXX-XXX-XXX-XX-X 00
1 2 3 4 5 6 ©2014
Saudi Diyar Consultants
79
Description:
Project Name: Material Submittal for Structure Cable for Document Reference No:
K88, Riyadh, Kingdom of Saudi Arabia Perimeter Intrusion System REV-02
We are excited to share with you that the Nexans Telecom Systems activity, supporting customers
with advanced solutions for data networks, data centers, and telecom networks for more than 30
years, has changed its brand to Aginode, while still operating under the umbrella of Nexans.
Aginode will leverage and build on our state-of-the-art industrial footprint and recognized
technological know-how in Europe, Middle East, Africa & Asia, to enable digital infrastructure
making life more connected, productive, and enjoyable.
Aginode designs, manufactures & sells connectivity solutions for digital networks in FTTx, Mobile,
LAN & Data Centre markets, with Aginode’s diverse product range under our brand names:
• LAN & Data Centres: LANmark™ , LANsense™, LANactive™
• FTTx & Mobile: XPLORER™, BRIGHTBOX™, INFRABIRD™, UPSKY™
Sincerely,
81
C.R. 1010631454
Dear Sir,
In reference to the aforementioned subject and based on the Manufacturer: Nexans, S3 confirms that
the warranty period for the materials listed below for the Security System in K88 – Al Yamama Palace
is 3 Years from handover.
However, the terms and conditions will be as per Manufacturer policy as mentioned in System O&M.
Yours Faithfully,
82
Test Report
Parameter Frequency Points Minimum { v [f] p } Maximum { v [f] p } Min. Margin { m (v l) [f] p } Result
IL (dB/100m) at 20°C 1-1 000 1601 1,75 [1] 1 125,36 [786,5] 4 0,18 (3,61 > 3,79) [4,122] 3 ü
Phase delay (ns/100m) 0,772-1 000 1601 -841,81 [0,772] 3 417,87 [769,6] 3 118,48 (416,99 > 535,47) [599,7] 3 ü
Skew (ns/100m) 0,772-1 000 1601 3,91 [785,2] 2-3 5,67 [0,772] 2-3 20,21 (4,79 > 25,00) [4,519] 2-3 ü
ZIN (Ohm) 1-599,8 960 88,53 [589,2] 2 113,98 [1] 2 8,59 (103,32 > 111,92) [10,37] 2 ü
Z0 (Ohm) (4th Order) 1-599,8 960 95,49 [599,8] 1 113,43 [1] 2
RL (dB) 1-599,8 960 20,46 [1] 1 51,39 [33,47] 4 4,70 (28,59 < 23,89) [5,995] 2 ü
NEXT (dB) 1-1 000 1601 66,67 [951,9] 3-4 109,45 [39,71] 1-3 14,84 (75,71 < 60,87) [587,3] 3-4 ü
PS NEXT (dB) 1-1 000 1601 66,62 [951,9] 4 105,47 [39,71] 3 17,81 (75,67 < 57,87) [587,3] 3 ü
FEXT (dB) 1-1 000 1601 91,90 [952,5] 2-3 112,63 [232,6] 1-3
ELFEXT (dB) 1-1 000 1601 34,99 [779,6] 1-2 106,22 [17,23] 1-2 11,08 (94,07 < 83,00) [4,122] 2-4 ü
PS ELFEXT (dB) 1-1 000 1601 32,49 [779,6] 1 102,70 [17,23] 2 17,84 (92,84 < 75,00) [4,122] 4 ü
Legend
IL = Insertion loss Phase delay = Phase delay Skew = Skew
ZIN = Input Impedance Z0 = Fitted Impedance RL = Return Loss
NEXT = Near End Crosstalk PS NEXT = Power Sum NEXT FEXT = Far End Crosstalk
ELFEXT = Equal Level FEXT PS ELFEXT = Power Sum ELFEXT
Pass Pass
60 600
55 580
50
560
45
Phase delay (ns/100m)
IL (dB/100m) at 20°C
540
40
35 520
30 500
25 480
20
460
15
440
10
5 420
0 400
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Powered by CIQ 3.0.2021-05-28(21H1)a2 (02.11.21), AESA GmbH System Development, Praemienstr. 9, D-52223 Stolberg
Frequency (GHz, 1 MHz - 1 GHz, 1601 Points) Frequency (GHz, 772 kHz - 1 GHz, 1601 Points)
Page 1 sur 15
Banc N°3 83 000020H4MT
Pass Pass
60 160
50 150
40
140
30
130
20
Skew (ns/100m)
120
ZIN (Ohm)
10
0 110
-10 100
-20
90
-30
80
-40
-50 70
-60 60
0,2 0,4 0,6 0,8 1 100 200 300 400 500 600
Frequency (GHz, 772 kHz - 1 GHz, 1601 Points) Frequency (MHz, 1 MHz - 599,8 MHz, 960 Points)
Pass Pass
130 80
125 75
70
120 65
115 60
Z0 (Ohm) (4th Order)
110 55
50
105 45
RL (dB)
100 40
95 35
30
90 25
85 20
80 15
10
75 5
70 0
100 200 300 400 500 600 100 200 300 400 500 600
Frequency (MHz, 1 MHz - 599,8 MHz, 960 Points) Frequency (MHz, 1 MHz - 599,8 MHz, 960 Points)
Pass Pass
100 100
95 95
90 90
85 85
80 80
75 75
PS NEXT (dB)
70 70
NEXT (dB)
65 65
60 60
55 55
50 50
45 45
40 40
Powered by CIQ 3.0.2021-05-28(21H1)a2 (02.11.21), AESA GmbH System Development, Praemienstr. 9, D-52223 Stolberg
35 35
30 30
25 25
20 20
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Frequency (GHz, 1 MHz - 1 GHz, 1601 Points) Frequency (GHz, 1 MHz - 1 GHz, 1601 Points)
Page 2 sur 15
Banc N°3 84 000020H4MT
Pass Pass
100 100
95 95
90 90
85 85
80 80
75 75
70 70
ELFEXT (dB)
FEXT (dB)
65 65
60 60
55 55
50 50
45 45
40 40
35 35
30 30
25 25
20 20
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Frequency (GHz, 1 MHz - 1 GHz, 1601 Points) Frequency (GHz, 1 MHz - 1 GHz, 1601 Points)
Pass
100
95
90
85
80
75
PS ELFEXT (dB)
70
65
60
55
50
45
40
35
30
25
20
0,2 0,4 0,6 0,8 1
Frequency (GHz, 1 MHz - 1 GHz, 1601 Points)
Powered by CIQ 3.0.2021-05-28(21H1)a2 (02.11.21), AESA GmbH System Development, Praemienstr. 9, D-52223 Stolberg
Page 3 sur 15
Banc N°3 85 000020H4MT
Summary and Graphic: Insertion loss (IL)
{ v = Value (dB/100m) at 20°C l = Limit (dB/100m) at 20°C m = Margin (dB/100m) at 20°C f = Frequency (MHz) }
Pair Start f Stop f Points Minimum { v [f] } Maximum { v [f] } Min. Margin { m (v l) [f] } Result
1 1 1 000 1601 1,75 [1] 121,43 [780,8] 0,23 (3,56 > 3,79) [4,122] ü
2 1 1 000 1601 1,66 [1] 112,84 [792,7] 0,31 (3,49 > 3,79) [4,122] ü
3 1 1 000 1601 1,74 [1] 105,37 [775,2] 0,18 (3,61 > 3,79) [4,122] ü
4 1 1 000 1601 1,65 [1] 125,36 [786,5] 0,28 (3,52 > 3,79) [4,122] ü
IL (dB/100m) at 20°C
40 40
35 35
30 30
25 25
20 20
15 15
10 10
5 5
0 0
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Frequency (GHz, 1 MHz - 1 GHz, 1601 Points) Frequency (GHz, 1 MHz - 1 GHz, 1601 Points)
IL (dB/100m) at 20°C
40 40
35 35
30 30
25 25
20 20
15 15
10 10
5 5
0 0
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Frequency (GHz, 1 MHz - 1 GHz, 1601 Points) Frequency (GHz, 1 MHz - 1 GHz, 1601 Points)
Page 4 sur 15
Banc N°3 86 000020H4MT
Summary and Graphic: Phase delay (Phase delay)
{ v = Value (ns/100m) l = Limit (ns/100m) m = Margin (ns/100m) f = Frequency (MHz) }
Pair Start f Stop f Points Minimum { v [f] } Maximum { v [f] } Min. Margin { m (v l) [f] } Result
1 0,772 1 000 1601 -843,97 [0,772] 415,11 [775,2] 121,47 (414,00 > 535,47) [599,7] ü
2 0,772 1 000 1601 -853,15 [0,772] 408,88 [787] 127,58 (407,89 > 535,47) [599,7] ü
3 0,772 1 000 1601 -841,81 [0,772] 417,87 [769,6] 118,48 (416,99 > 535,47) [599,7] ü
4 0,772 1 000 1601 -846,35 [0,772] 412,00 [780,8] 124,63 (410,84 > 535,47) [599,7] ü
580 580
560 560
Phase delay (ns/100m)
520 520
500 500
480 480
460 460
440 440
420 420
400 400
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Frequency (GHz, 772 kHz - 1 GHz, 1601 Points) Frequency (GHz, 772 kHz - 1 GHz, 1601 Points)
580 580
560 560
Phase delay (ns/100m)
540 540
520 520
500 500
480 480
460 460
440 440
420 420
400 400
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Frequency (GHz, 772 kHz - 1 GHz, 1601 Points) Frequency (GHz, 772 kHz - 1 GHz, 1601 Points)
Page 5 sur 15
Banc N°3 87 000020H4MT
Summary and Graphic: Skew (Skew)
{ v = Value (ns/100m) l = Limit (ns/100m) m = Margin (ns/100m) f = Frequency (MHz) }
Combo Start f Stop f Points Minimum { v [f] } Maximum { v [f] } Min. Margin { m (v l) [f] } Result
1-2 0,772 1 000 1601 2,19 [786,4] 4,59 [0,772] 21,83 (3,17 > 25,00) [4,519] ü
1-3 0,772 1 000 1601 0,89 [777,7] 1,73 [787] 23,38 (1,62 > 25,00) [4,519] ü
1-4 0,772 1 000 1601 0,87 [783,9] 1,76 [793,9] 23,41 (1,59 > 25,00) [383,6] ü
2-3 0,772 1 000 1601 3,91 [785,2] 5,67 [0,772] 20,21 (4,79 > 25,00) [4,519] ü
2-4 0,772 1 000 1601 0,79 [790,2] 3,40 [0,772] 23,40 (1,60 > 25,00) [4,519] ü
3-4 0,772 1 000 1601 2,25 [780,8] 3,42 [792,7] 21,82 (3,18 > 25,00) [4,519] ü
Combo 1-2 Pass Combo 1-3 Pass
60 60
50 50
40 40
30 30
20 20
Skew (ns/100m)
Skew (ns/100m)
10 10
0 0
-10 -10
-20 -20
-30 -30
-40 -40
-50 -50
-60 -60
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Frequency (GHz, 772 kHz - 1 GHz, 1601 Points) Frequency (GHz, 772 kHz - 1 GHz, 1601 Points)
Skew (ns/100m)
10 10
0 0
-10 -10
-20 -20
-30 -30
-40 -40
-50 -50
-60 -60
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Frequency (GHz, 772 kHz - 1 GHz, 1601 Points) Frequency (GHz, 772 kHz - 1 GHz, 1601 Points)
Skew (ns/100m)
10 10
0 0
-10 -10
-20 -20
-30 -30
-40 -40
-50 -50
-60 -60
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Powered by CIQ 3.0.2021-05-28(21H1)a2 (02.11.21), AESA GmbH System Development, Praemienstr. 9, D-52223 Stolberg
Frequency (GHz, 772 kHz - 1 GHz, 1601 Points) Frequency (GHz, 772 kHz - 1 GHz, 1601 Points)
Page 6 sur 15
Banc N°3 88 000020H4MT
Detail Discrete Frequencies: Skew Skew (ns/100m)
Frequency [MHz] 1,00 10,00 100,00 250,00 500,00 1 000,00 No. of
Freq. found [MHz] 0,772 10,14 100,07 249,95 499,76 1 000,00 Error Points
Max. Spec. 25,00 25,00 25,00 25,00
Combo 1-2 4,59 3,12 3,06 3,06 3,05 3,04 -
Combo 1-3 1,08 1,57 1,52 1,51 1,50 1,51 -
Combo 1-4 1,19 1,58 1,58 1,58 1,58 1,58 -
Combo 2-3 5,67 4,68 4,58 4,57 4,55 4,55 -
Combo 2-4 3,40 1,53 1,48 1,48 1,47 1,46 -
Combo 3-4 2,27 3,15 3,10 3,09 3,08 3,08 -
Pair Start f Stop f Points Minimum { v [f] } Maximum { v [f] } Min. Margin { m (v l) [f] } Result
1 1 599,8 960 92,07 [591] 113,66 [1] 8,88 (103,82 > 112,70) [7,868] ü
2 1 599,8 960 88,53 [589,2] 113,98 [1] 8,59 (103,32 > 111,92) [10,37] ü
3 1 599,8 960 93,56 [457,4] 110,24 [516,1] 8,72 (97,90 < 89,18) [20,98] ü
4 1 599,8 960 91,06 [582,9] 113,48 [1] 8,72 (98,08 < 89,35) [11,61] ü
150 150
140 140
130 130
120 120
ZIN (Ohm)
ZIN (Ohm)
110 110
100 100
90 90
80 80
70 70
60 60
100 200 300 400 500 600 100 200 300 400 500 600
Frequency (MHz, 1 MHz - 599,8 MHz, 960 Points) Frequency (MHz, 1 MHz - 599,8 MHz, 960 Points)
150 150
140 140
130 130
120 120
ZIN (Ohm)
ZIN (Ohm)
110 110
100 100
Powered by CIQ 3.0.2021-05-28(21H1)a2 (02.11.21), AESA GmbH System Development, Praemienstr. 9, D-52223 Stolberg
90 90
80 80
70 70
60 60
100 200 300 400 500 600 100 200 300 400 500 600
Frequency (MHz, 1 MHz - 599,8 MHz, 960 Points) Frequency (MHz, 1 MHz - 599,8 MHz, 960 Points)
Page 7 sur 15
Banc N°3 89 000020H4MT
Summary and Graphic: Fitted Impedance (Z0 (4th Order))
{ v = Value (Ohm) l = Limit (Ohm) m = Margin (Ohm) f = Frequency (MHz) }
Pair Start f Stop f Points Minimum { v [f] } Maximum { v [f] } Min. Margin { m (v l) [f] } Result
1 1 599,8 960 95,49 [599,8] 113,33 [1] ü
2 1 599,8 960 99,29 [599,8] 113,43 [1] ü
3 1 599,8 960 98,93 [8,493] 107,58 [1] ü
4 1 599,8 960 99,53 [599,8] 112,74 [1] ü
110 110
105 105
100 100
95 95
90 90
85 85
80 80
75 75
70 70
100 200 300 400 500 600 100 200 300 400 500 600
Frequency (MHz, 1 MHz - 599,8 MHz, 960 Points) Frequency (MHz, 1 MHz - 599,8 MHz, 960 Points)
Powered by CIQ 3.0.2021-05-28(21H1)a2 (02.11.21), AESA GmbH System Development, Praemienstr. 9, D-52223 Stolberg
Page 8 sur 15
Banc N°3 90 000020H4MT
Summary and Graphic: Return Loss (RL)
{ v = Value (dB) l = Limit (dB) m = Margin (dB) f = Frequency (MHz) }
Pair Start f Stop f Points Minimum { v [f] } Maximum { v [f] } Min. Margin { m (v l) [f] } Result
1 1 599,8 960 20,46 [1] 64,63 [33,47] 6,41 (30,30 < 23,89) [5,995] ü
2 1 599,8 960 21,05 [1] 64,20 [33,47] 4,70 (28,59 < 23,89) [5,995] ü
3 1 599,8 960 22,44 [1] 66,79 [407,5] 7,38 (31,27 < 23,89) [5,995] ü
4 1 599,8 960 20,47 [1] 59,59 [36,59] 6,00 (29,88 < 23,89) [5,995] ü
RL (dB)
40 40
35 35
30 30
25 25
20 20
15 15
10 10
5 5
0 0
100 200 300 400 500 600 100 200 300 400 500 600
Frequency (MHz, 1 MHz - 599,8 MHz, 960 Points) Frequency (MHz, 1 MHz - 599,8 MHz, 960 Points)
RL (dB)
40 40
35 35
30 30
25 25
20 20
15 15
10 10
5 5
0 0
100 200 300 400 500 600 100 200 300 400 500 600
Frequency (MHz, 1 MHz - 599,8 MHz, 960 Points) Frequency (MHz, 1 MHz - 599,8 MHz, 960 Points)
Page 9 sur 15
Banc N°3 91 000020H4MT
Detail Discrete Frequencies: Fitted Impedance Z0 (Ohm)
Frequency [MHz] 1,00 10,00 100,00 250,00 500,00 1 000,00 No. of
Freq. found [MHz] 1,00 9,74 100,28 250,13 499,88 1 000,00 Error Points
Pair 1 113,33 102,08 98,20 96,62 95,69 94,98 -
Pair 2 113,43 101,68 100,28 99,71 99,37 99,11 -
Pair 3 107,58 98,96 102,29 103,47 104,15 104,66 -
Pair 4 112,74 100,39 99,94 99,71 99,56 99,45 -
Combo Start f Stop f Points Minimum { v [f] } Maximum { v [f] } Min. Margin { m (v l) [f] } Result
1-2 1 1 000 1601 83,41 [947,6] 124,48 [22,85] 23,23 (98,23 < 75,00) [64,69] ü
1-3 1 1 000 1601 93,12 [899,5] 139,82 [57,19] 27,21 (102,21 < 75,00) [4,746] ü
1-4 1 1 000 1601 85,28 [994,4] 135,39 [130,2] 22,14 (97,14 < 75,00) [6,619] ü
2-3 1 1 000 1601 88,12 [953,8] 131,48 [907] 24,10 (98,09 < 73,98) [78,42] ü
2-4 1 1 000 1601 83,54 [910,7] 140,25 [208,9] 22,16 (97,16 < 75,00) [4,122] ü
3-4 1 1 000 1601 66,67 [951,9] 128,96 [52,2] 14,84 (75,71 < 60,87) [587,3] ü
Combo 1-2 Pass Combo 1-3 Pass
100 100
95 95
90 90
85 85
80 80
75 75
70 70
NEXT (dB)
NEXT (dB)
65 65
60 60
55 55
50 50
45 45
40 40
35 35
30 30
25 25
20 20
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Frequency (GHz, 1 MHz - 1 GHz, 1601 Points) Frequency (GHz, 1 MHz - 1 GHz, 1601 Points)
NEXT (dB)
65 65
60 60
55 55
50 50
45 45
40 40
35 35
30 30
25 25
20 20
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Frequency (GHz, 1 MHz - 1 GHz, 1601 Points) Frequency (GHz, 1 MHz - 1 GHz, 1601 Points)
95 95
90 90
85 85
80 80
75 75
70 70
NEXT (dB)
NEXT (dB)
65 65
60 60
55 55
50 50
45 45
40 40
35 35
30 30
25 25
20 20
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Frequency (GHz, 1 MHz - 1 GHz, 1601 Points) Frequency (GHz, 1 MHz - 1 GHz, 1601 Points)
Page 10 sur 15
Banc N°3 92 000020H4MT
Detail Discrete Frequencies: Near End Crosstalk NEXT (dB)
Frequency [MHz] 1,00 10,00 100,00 250,00 500,00 1 000,00 No. of
Freq. found [MHz] 1,00 9,74 100,28 250,13 499,88 1 000,00 Error Points
Min. Spec. 75,00 72,38 66,43 61,92
Combo 1-2 96,05 113,41 100,03 96,42 94,80 86,79 -
Combo 1-3 100,49 105,45 107,83 105,26 106,09 109,60 -
Combo 1-4 104,94 103,77 104,73 107,12 106,56 86,48 -
Combo 2-3 103,01 105,50 99,15 100,18 104,59 99,03 -
Combo 2-4 102,40 110,89 112,26 109,24 95,77 85,50 -
Combo 3-4 102,87 105,26 96,61 100,35 81,80 71,93 -
Pair Start f Stop f Points Minimum { v [f] } Maximum { v [f] } Min. Margin { m (v l) [f] } Result
1 1 1 000 1601 82,37 [998,1] 109,13 [70,31] 21,07 (96,07 < 75,00) [4,122] ü
2 1 1 000 1601 81,62 [910,7] 108,31 [51,57] 20,75 (95,75 < 75,00) [4,122] ü
3 1 1 000 1601 66,66 [951,9] 110,16 [4,122] 17,81 (75,67 < 57,87) [587,3] ü
4 1 1 000 1601 66,62 [951,9] 109,52 [47,2] 17,81 (75,68 < 57,87) [587,3] ü
PS NEXT (dB)
70 70
65 65
60 60
55 55
50 50
45 45
40 40
35 35
30 30
25 25
20 20
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Frequency (GHz, 1 MHz - 1 GHz, 1601 Points) Frequency (GHz, 1 MHz - 1 GHz, 1601 Points)
PS NEXT (dB)
70 70
65 65
60 60
55 55
50 50
45 45
40 40
35 35
30 30
25 25
Powered by CIQ 3.0.2021-05-28(21H1)a2 (02.11.21), AESA GmbH System Development, Praemienstr. 9, D-52223 Stolberg
20 20
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Frequency (GHz, 1 MHz - 1 GHz, 1601 Points) Frequency (GHz, 1 MHz - 1 GHz, 1601 Points)
Page 11 sur 15
Banc N°3 93 000020H4MT
Detail Discrete Frequencies: Power Sum NEXT PS NEXT (dB)
Frequency [MHz] 1,00 10,00 100,00 250,00 500,00 1 000,00 No. of
Freq. found [MHz] 1,00 9,74 100,28 250,13 499,88 1 000,00 Error Points
Min. Spec. 75,00 69,38 63,43 58,92
Pair 1 94,32 101,24 98,26 95,57 94,23 83,61 -
Pair 2 94,49 103,88 96,44 94,74 92,00 82,98 -
Pair 3 97,19 100,63 94,48 96,61 81,76 71,92 -
Pair 4 98,50 100,97 95,88 99,08 81,61 71,60 -
FEXT (dB)
65 65
60 60
55 55
50 50
45 45
40 40
35 35
30 30
25 25
20 20
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Frequency (GHz, 1 MHz - 1 GHz, 1601 Points) Frequency (GHz, 1 MHz - 1 GHz, 1601 Points)
FEXT (dB)
65 65
60 60
55 55
50 50
45 45
40 40
35 35
30 30
25 25
20 20
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Frequency (GHz, 1 MHz - 1 GHz, 1601 Points) Frequency (GHz, 1 MHz - 1 GHz, 1601 Points)
FEXT (dB)
65 65
60 60
Powered by CIQ 3.0.2021-05-28(21H1)a2 (02.11.21), AESA GmbH System Development, Praemienstr. 9, D-52223 Stolberg
55 55
50 50
45 45
40 40
35 35
30 30
25 25
20 20
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Frequency (GHz, 1 MHz - 1 GHz, 1601 Points) Frequency (GHz, 1 MHz - 1 GHz, 1601 Points)
Page 12 sur 15
Banc N°3 94 000020H4MT
Summary and Graphic: Equal Level FEXT (ELFEXT)
{ v = Value (dB) l = Limit (dB) m = Margin (dB) f = Frequency (MHz) }
Combo Start f Stop f Points Minimum { v [f] } Maximum { v [f] } Min. Margin { m (v l) [f] } Result
1-2 1 1 000 1601 34,99 [779,6] 118,67 [297,6] 17,77 (100,76 < 83,00) [4,122] ü
1-3 1 1 000 1601 39,23 [779,6] 128,29 [66,56] 22,64 (104,41 < 81,77) [4,746] ü
1-4 1 1 000 1601 36,40 [781,5] 123,22 [50,33] 16,17 (99,17 < 83,00) [4,122] ü
2-3 1 1 000 1601 40,21 [794] 129,82 [469,9] 21,84 (104,84 < 83,00) [4,122] ü
2-4 1 1 000 1601 42,74 [793,3] 126,18 [46,58] 11,08 (94,07 < 83,00) [4,122] ü
3-4 1 1 000 1601 42,52 [774] 129,15 [343,2] 24,33 (102,43 < 78,10) [7,244] ü
Combo 1-2 Pass Combo 1-3 Pass
100 100
95 95
90 90
85 85
80 80
75 75
ELFEXT (dB)
ELFEXT (dB)
70 70
65 65
60 60
55 55
50 50
45 45
40 40
35 35
30 30
25 25
20 20
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Frequency (GHz, 1 MHz - 1 GHz, 1601 Points) Frequency (GHz, 1 MHz - 1 GHz, 1601 Points)
ELFEXT (dB)
70 70
65 65
60 60
55 55
50 50
45 45
40 40
35 35
30 30
25 25
20 20
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Frequency (GHz, 1 MHz - 1 GHz, 1601 Points) Frequency (GHz, 1 MHz - 1 GHz, 1601 Points)
ELFEXT (dB)
70 70
65 65
60 60
55 55
50 50
45 45
40 40
35 35
30 30
25 25
20 20
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Powered by CIQ 3.0.2021-05-28(21H1)a2 (02.11.21), AESA GmbH System Development, Praemienstr. 9, D-52223 Stolberg
Frequency (GHz, 1 MHz - 1 GHz, 1601 Points) Frequency (GHz, 1 MHz - 1 GHz, 1601 Points)
Page 13 sur 15
Banc N°3 95 000020H4MT
Detail Discrete Frequencies: Far End Crosstalk FEXT (dB)
Frequency [MHz] 1,00 10,00 100,00 250,00 500,00 1 000,00 No. of
Freq. found [MHz] 1,00 9,74 100,28 250,13 499,88 1 000,00 Error Points
Combo 1-2 97,93 105,48 107,35 102,38 105,08 97,97 -
Combo 1-3 106,81 113,18 110,18 104,91 109,70 108,75 -
Combo 1-4 100,55 103,74 110,01 109,53 102,77 104,67 -
Combo 2-3 113,21 109,23 102,43 114,07 108,66 105,96 -
Combo 2-4 95,66 103,63 109,41 103,25 107,45 108,94 -
Combo 3-4 110,62 110,81 108,57 104,29 103,16 110,18 -
Pair Start f Stop f Points Minimum { v [f] } Maximum { v [f] } Min. Margin { m (v l) [f] } Result
1 1 1 000 1601 32,49 [779,6] 108,58 [16,61] 18,90 (93,90 < 75,00) [7,244] ü
2 1 1 000 1601 34,99 [779,6] 105,92 [20,98] 17,94 (92,94 < 75,00) [4,122] ü
3 1 1 000 1601 39,20 [779,6] 108,88 [5,995] 24,93 (99,93 < 75,00) [7,244] ü
4 1 1 000 1601 36,40 [781,5] 105,84 [15,99] 17,84 (92,84 < 75,00) [4,122] ü
PS ELFEXT (dB)
70 70
65 65
60 60
55 55
50 50
45 45
40 40
35 35
30 30
25 25
20 20
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Frequency (GHz, 1 MHz - 1 GHz, 1601 Points) Frequency (GHz, 1 MHz - 1 GHz, 1601 Points)
PS ELFEXT (dB)
70 70
65 65
60 60
Powered by CIQ 3.0.2021-05-28(21H1)a2 (02.11.21), AESA GmbH System Development, Praemienstr. 9, D-52223 Stolberg
55 55
50 50
45 45
40 40
35 35
30 30
25 25
20 20
0,2 0,4 0,6 0,8 1 0,2 0,4 0,6 0,8 1
Frequency (GHz, 1 MHz - 1 GHz, 1601 Points) Frequency (GHz, 1 MHz - 1 GHz, 1601 Points)
Page 14 sur 15
Banc N°3 96 000020H4MT
Detail Discrete Frequencies: Power Sum ELFEXT PS ELFEXT (dB)
Frequency [MHz] 1,00 10,00 100,00 250,00 500,00 1 000,00 No. of
Freq. found [MHz] 1,00 9,74 100,28 250,13 499,88 1 000,00 Error Points
Min. Spec. 72,53 52,28 44,34 38,32
Pair 1 94,81 98,55 95,10 85,37 79,41 67,12 -
Pair 2 92,74 98,13 91,60 85,13 81,35 67,38 -
Pair 3 103,78 103,34 91,89 86,65 80,44 73,51 -
Pair 4 93,49 97,61 95,40 85,61 78,35 72,75 -
End of report
Powered by CIQ 3.0.2021-05-28(21H1)a2 (02.11.21), AESA GmbH System Development, Praemienstr. 9, D-52223 Stolberg
Page 15 sur 15
Banc N°3 97 000020H4MT
Cable material number 10530499
Product Description UC-30 12XG657A1 SP1830 BK (DPL/LAN)
Production order
Date 23/01/2023
Purchase Order Number 4500354301 / 493337 / APTEC
Sold To Party NEXANS CABLING SOLUTIONS NV / ALSEMBERGSESTEENWEG 2, bus 3 / 1501 BUIZINGEN
Our sap ref. 493416/20
Delivery note/item 80984435
Drum 8XCH00901
Cable id 8XCH00901
Supplied Length 1 050
Customer art. N164.UCPE12B
Customer order Length 2 100
98
COO – Nexans Cabling Solutions
Project : YAMAMA PALACE
N10i.005-ODKF LANmark Industry S/FTP AWG23 Cat 6A LSZH Dca Orange + PE Fca Black 500m reel France
N42i.101 LANmark Industry Modular iConnect Box DIN Rail Mount 6 Snap-In Black France
N11A.U1F010OK LANmark-6A Ultim Patch Cord Cat 6A Screened LSZH 1m Orange China
N121.4MLY LANmark-OF Pigtail LC/UPC Singlemode Maxistrip LSZH 9/125 1m Yellow China
N122.7UUA15 LANmark-OF ENSPACE Patch Cord DLC-DLC OM4 LSZH 15m Aqua China
N439.3MPP LANmark-OF Plug&Play Patch Panel Integrated Cord Guide Sliding Black China
99