Professional Documents
Culture Documents
ספר רכב אנגלית Nc
ספר רכב אנגלית Nc
Dear customer,
Thank you for your trust in GEELY and thank you for choosing GEELY automobile which
will provide you with excellent performance in safety, comfort, power, and fuel-economy. We
hope to bring happiness and fun to your work and life with our premium products and
services.
Please read and follow the contents of the Manual before using the vehicle so as to help
you better understand and use Geely automobiles and ensure that your vehicle is always in
good technological state and maintain best performance in your future use. The more you
know about your vehicle, the more you can enjoy the safety and fun of driving it.
If you find any problems in use, please contact Geely Service for maintenance as soon
as possible. You will be provided with high-quality services in vehicle maintenance and repair.
Please be sure to maintain your car on schedule in accordance with the requirements in this
Manual.
This Manual is an integral part of the vehicle. When selling or lending the vehicle, please
forward this manual to the new owner.
Happy Life, Geely Drive!
February 2023
All Rights Reserved. Without the written permission of GAIC, this Manual cannot be
reproduced or copied in whole or in part.
Note: The cover and pictures in the manual are only for reference. All the pictures shall
be subject to the actual devices on the vehicle.
Contents
Notes to users 21 Front seats 1
5 About this Manual 23 Rear seats
5 Notes to users 24 Seat heating/ventilation*
8 Prompt message 25 Driver seat memory function*
8 Graphics 27 Instrument cluster 2
9 Vehicle identification 27 Instrument Cluster Overview
9 Appearance overview 31 Warnings and indicators
10 Interior overview 35 Head up display (HUD)*
11 Overview of front engine 35 Heads up display (HUD) 3
compartment 37 Air conditioner
12 Overview of high-voltage system 37 Front A/C control system
Entering and leaving 41 Air vent adjustment
42 A/C settings 4
13 Key and anti-theft
42 Air monitoring system*
13 Smart key
14 Drive motor anti-theft 43 Light and wiper
43 Light control combination switch
14 Vehicle locking and unlocking 5
45 Wiper control combination
14 Keyless locking and unlocking
switch
16 Remote locking and unlocking
47 Interior lighting
16 Central control locking and
48 Outdoor lamp
unlocking
16 Automatic locking and unlocking 49 Steering wheel 6
17 Door handle unlocking 49 Horn
17 Trunk door open 49 Steering wheel adjustment
18 Child safety lock 49 Steering wheel button
1
57 Sunroof* 84 Vehicle start
57 Panoramic sunroof 84 Starting procedures
58 Sun visor 85 Gearshift operation
58 Sun visor and makeup mirror 85 Gear information
59 Storage space 85 Shift
59 Front storage 86 Driving mode
61 Rear storage 86 Driving mode
62 Trunk storage 87 Intelligent driving system
63 In-vehicle power supply 87 Intelligent driving system
63 Wired charging introduction
63 Wireless charging* 87 Cruise control system (CC)
64 Luggage rack 89 Automatic speed limit control
64 Luggage rack* system (LIM)
91 Adaptive cruise control system
Safe travel (ACC)*
65 Seat belt 100 Intelligent cruise control
65 Seat belt overview system (ICC) *
66 Three-point seat belt 107 Lane keeping assist (LKA)*
110 Automatic emergency braking
69 Airbag
system (AEB) *
69 Airbag overview
116 Rear side radar assist system*
69 Positions of airbags
119 Intelligent high beam control
72 Deployment of airbag
system (IHBC)*
74 Child restraint system
121 Driver assist system
74 Selection of child safety device
121 Service brake
76 Use of child restraint system
121 Recuperating
77 Installation of child restraint
122 Parking brake
system
124 Anti-lock braking system (ABS)
Starting and driving 124 Electronic braking-force
distribution (EBD)
81 Driving
125 Electronic stability control
81 Driving instructions
(ESC) system
2
125 Hydraulic brake assist (HBA) 143 Towing eye
126 Traction control system (TCS) 145 Replacement of spare tire 1
126 Hill hold control (HHC) 145 Replacement of spare tire
126 Hill descent control (HDC)
148 Replacement of fuse
127 Electric power steering (EPS)
148 Inspection or replacement of
127 Park assist system fuse 2
127 Park assist system 149 Front engine compartment fuse
128 Reversing visual system box
130 Panoramic image system* 152 Interior fuse box
132 Vehicle charging 155 Replacement of bulb 3
132 Charging precautions 155 Replacement of bulb
132 Charging operation
156 Emergency handling
Emergency 156 Drive motor or motor controller
137 Emergency equipment overheating 4
137 Hazard warning lamp 156 Vehicle fire
137 Reflective vest 157 Getting vehicle out of trap
137 Warning triangle 157 Emergency response to road
138 First aid kit accidents*
5
138 Fire extinguisher Repair and maintenance
139 Emergency unlocking 159 Maintenance instruction
139 Emergency unlocking door 159 Regular maintenance
139 Emergency unlocking trunk
159 Oils and fluids 6
door
159 Open and close the front
140 Emergency unlocking charger
engine hood
141 Replace the key battery 160 Coolant
141 Replace the key battery 162 Brake fluid 7
142 Jumper starting 162 Washer fluid
142 Jumper starting 163 Wiper blades
143 Vehicle towing 163 Replacement of wiper blade
143 Towing tips 165 Low voltage battery 8
3
165 Maintenance of low-voltage 176 Driving motor code
battery 177 Technical parameters
166 Power battery 177 Main dimensions and
166 Power battery parameters
167 Tire 177 Mass parameters of the vehicle
167 Tire maintenance 177 Power efficiency of the vehicle
178 Drive motor parameters
171 Vehicle cleaning
178 Power battery parameters
171 Exterior cleaning
178 Tire parameters
172 Interior cleaning
179 Wheel alignment parameters
Technical information 180 Recommended fluids
175 Vehicle identification 180 Recommended Liquids and
175 Vehicle identification number Volume
175 Vehicle certification label
4
Notes to users
5
Notes to users
High voltage safety case, try to start the system again. If the
ready for operation indicator is not on,
The following information can protect the
contact Geely Service for maintenance
safety of occupants and first-aid personnel
as soon as possible.
in the vehicle from high-voltage electricity:
• When the impact sensor detects a
• The high-voltage fuse (inside the power
certain degree of impact, the system and
battery) provides short circuit protection
high-voltage current output will be cut off
for the power battery.
in an emergency to minimize the risk of
• The positive and negative high-voltage
electric shock. If the emergency cut-off
cables connected to the power battery
system is activated, the vehicle cannot
are usually controlled by the high-voltage
be restarted. To restart the vehicle,
relay. When the vehicle high-voltage
contact Geely Service for maintenance.
power supply is disconnected, the relay
This vehicle is equipped with high
is disconnected to prevent current from
voltage DC and AC systems and 12 V
flowing out of the power battery.
low voltage system. High voltage DC and
• The vehicle power supply can be
AC equipment systems are very dangerous
reduced to the safe voltage for human
and may cause serious casualties in case of
touch only after 5 minutes of cutting off.
failure.
To prevent serious injury or even death
due to severe burns or electric shock, do Important tips
not touch, cut off or damage any orange • Please check tire wear and tire pressure
high-voltage cables or high-voltage regularly as per the methods
components. recommended herein and tire pressure
• Both positive and negative cables are requirements.
insulated from the metal body. High • Always use the oil and fluid
voltage current will not flow through the recommended in this manual and
metal body through these cables. As the conduct maintenance as per the
metal body is insulated from high-voltage Warranty and Maintenance Manual.
components, it is safe to touch the metal
Safety precautions
body.
• The high voltage value of the vehicle is
Warning message about 400V. Do not touch any high
• In case of power system failure or user's voltage components with bare hands
improper operation, the combination without disconnecting the high voltage.
instrument will automatically display High voltage components include: drive
warning message. Please read the motor controller, power harness device,
message and follow its instructions. If the on-board charger, high voltage main
warning lamp is on, a warning message cable, fast charging plug, fast charging
is displayed. Or if the battery fails, the socket, power battery, drive motor, slow
power system may not be started. In this
6
Notes to users
charging socket, slow charging plug, etc. • It is necessary to use and place foot mats
The high-voltage cables in the vehicle with appropriate sizes properly. The foot
are wrapped with orange bellows, so mats shall not affect the normal use of
1
please pay attention to identification. each pedal so as to avoid affecting the
• Do not touch the positive and negative action of the pedals due to the sliding of
poles of the power battery box with both the foot pads and causing traffic
hands at any time. accidents.
• Never crush, puncture, burn or damage
2
Accessories, spare parts and
the battery system manually. modifications
• Do not sell, transfer, modify or store any
• For your driving safety, do not remove
power battery without permission. Geely
parts and components on your own.
Service shall be responsible for recycling
• Refitting or adding devices is not 3
and removing the power battery from the
allowed. Geely Auto assumes no
scrapped vehicle according to the
responsibility for direct or indirect losses
specified process to prevent safety
caused by the modification or addition of
accidents.
devices.
• When washing the vehicle, try not to aim
• Geely Auto is only responsible for the 4
the water gun at the connector at the
tested and certified original hardbound
bottom of the chassis for washing.
accessories and optional equipment. In
• The ambient temperature for vehicle
order to ensure the vehicle performance
parking shall be between - 30 ℃ and 55
and safety as much as possible, the
℃, otherwise the vehicle may not be
original hardbound accessories of Geely
operated normally. 5
Auto are preferred.
• This vehicle is equipped with an anti-lock
braking system (ABS). In case of
emergency braking, be sure to depress
the brake pedal hard rather than make
inching braking. 6
• This vehicle is equipped with airbags. For
the safety of children , do not use any
backward child restraint system on a seat
with frontal airbag protection (activated).
• The vehicle operating environment shall 7
be free of corrosive, explosive and
insulating damaging gases or conductive
dust, and shall be far away from heat
sources.
8
7
Notes to users
High pressure
Issues mentioned here are related to
the high-voltage circuit of battery
electric vehicles, which must be strictly
observed; otherwise it may cause electric
shock or more serious injury to death.
Caution
Steps and requirements stated in the
notice must be strictly observed.
Otherwise your vehicle might be damaged.
Description
Indicative descriptions for your better
use of the vehicle information.
Environment
Issues described are related to
environmental protection.
Asterisk
The asterisk “*” symbol following a title or
name indicates that the configuration or
function described is only featured on
8
Notes to users
Vehicle identification
Appearance overview 1
9
Notes to users
Interior overview
10
Notes to users
11
Notes to users
12
Entering and leaving
Key and anti-theft will be activated, the turn signal flashes, and
the horn beeps.
Smart key 1
Please keep the backup smart key in
Introduction of key buttons
a safe place and do not place it inside
The smart key has been matched to the your vehicle.
vehicle system. If the smart key is lost, Electronic disturbance of built-in anti-theft
damaged or stolen, contact Geely Service chip will make key system and anti-theft
2
as soon as possible. The control functions system work abnormally and as a result, the
such as starting, unlocking and locking will vehicle may be unable to be started.
be canceled for the lost, damaged or stolen
Take out the mechanical key
smart key. If the smart key is retrieved, its
function can be activated again at Geely Press the button on the back of the smart
Service. key to take out the mechanical key.
3
The new smart key cannot be
available immediately. It takes some
time for Geely Service to match new a smart
key with your vehicle. 4
13
Entering and leaving
Keyless unlocking
14
Entering and leaving
15
Entering and leaving
Automatic unlocking
After the vehicle is automatically locked, if
the vehicle is stopped and the vehicle power
is set to OFF, the door will be unlocked
automatically.
Collision unlocking
In case of severe head-on collision in travel,
the four doors are unlocked automatically so
16
Entering and leaving
that the occupants can leave the vehicle Trunk door open
quickly.
Open the trunk door 1
Door handle unlocking
Open or close the trunk door slowly
and gently by hand. Failure to do so
may result in damage or loss of function of
the trunk door.
2
Open the trunk door from outside the
vehicle
17
Entering and leaving
Unlock the trunk door with the smart safety lock is in the OPEN position. The
key door cannot be opened from inside the
vehicle, but can only be opened from
outside the vehicle so as to ensure
children's safety during driving.
18
Entering and leaving
19
Entering and leaving
20
Vehicle description
21
Vehicle description
22
Vehicle description
Rear seats
Rear seat headrest adjustment 1
23
Vehicle description
• Make sure the seat belt is not twisted or heating indicator is off, it indicates that the
stuck below the seat, but well positioned seat heating is off.
for use.
If your body can't feel pain or
When the child restraint is placed in
temperature due to drugs, paralysis,
the rear seat, the child restraint and its
palsy or other diseases, please do not use
installation guide sheath must be removed
the seat heating function. Otherwise, it may
before the rear seat backrest folding
cause burns to the body.
function can be used.
Seat heating/ventilation*
Front seat heating • Do not kneel on the seat or put the seat
under concentrated load, to avoid
damaging the elements of the seat
heating unit.
• Do not clean the seat by wet washing.
• The seat heating function can only be
enabled when the vehicle is in the
READY state, which can greatly reduce
the battery power consumption.
• If the power of the whole vehicle is too
low, the seat heating function will be
automatically disabled so that the vehicle
1. On the multimedia display screen, click has enough power.
the buttons Air Conditioner → Seat → • When the seat heating function is active,
Seat Heating in turn, and select the seat seat cushion must not be placed on the
heating function in this interface. seat.
2. Click the heating adjustment button
Front seat ventilation
under the driver's seat or front
passenger seat.
24
Vehicle description
25
Vehicle description
26
Vehicle description
Instrument cluster
Instrument Cluster Overview 1
27
Vehicle description
reference. All the pictures shall be subject to steering wheel keys on multimedia
the actual devices on the vehicle. display and combination instrument
28
Vehicle description
Menu information
First-level Second-level Fourth-level 1
Third-level menu
menu menu menu
APC
IPC
TPMS
2
Fault inquiry
Yes
Reset trip computers
No
Yes
Trip computer Reset Tripmeter 3
No
Yes
Reset APC
No
Date XX XX XX
4
XX:XX
Clock (hour value range: 00-23;
minute value range: 00-59)
XXXkm/h
(speed value range: 30-140)
OverSpeed 5
Settings Disable
Next Service XXXXX km
Service completed 6
High
Volume Medium
Low
℃ 7
Temperature
℉
Unit Bar
Pressure
psi
29
Vehicle description
Customized mode
EPS mode Comfort
Settings Normal
Sport
Rear seat On
reminder Off
Language*
30
Vehicle description
2
Right turn signal indicator Right turn signal is on
31
Vehicle description
32
Vehicle description
Low power battery level indicator Power battery level is too low
33
Vehicle description
• If the vehicle power supply is placed in the ON gear or the vehicle is started, some
indicators will perform self-check and be on for a few seconds before going out. If any
fault makes indicators constantly on or light up during driving, pay attention to it and
contact Geely Automobile Service for maintenance as soon as possible. Otherwise,
severe casualty or property loss may occur.
• The indicator is constantly on after the vehicle is started, or it is on while the vehicle is
driving, it means that the vehicle may be faulty seriously. Please contact Geely
Automobile Service for maintenance as soon as possible.
Black icons in the table are displayed as white in the instrument cluster display.
34
Vehicle description
Personalization settings
Turn on/off the active safety display and
Bluetooth phone display. 3
The visibility of HUD is affected by the
following conditions:
• Polarizing filter or polarized sunglasses
may affect the visibility of HUD images,
making the image dark or unclear. 4
• In extreme sunlight, the image part may
gradually disappear briefly and then
On the multimedia display screen, click Set recover, which is normal.
up → Smart Cabin → HUD to enable/ • If light is blocked by foreign objects on
disable the HUD function in this interface. the upper trim cover of HUD, the image 5
HUD adjustment switch display may be affected.
The HUD adjustment switch can be turned • The front windshield is a kind of special
on or off on the HUD switch interface to set glass, go to Geely Automobile Service for
the HUD brightness and position replacement.
adjustment. • Rainstorm or wet road surface may affect 6
• Height adjustment: push up or down the the imaging, which is normal.
selection and confirmation button on the
right side of the steering wheel.
• Brightness adjustment: press the left or
right selection button on the right side of 7
the steering wheel.
After adjustment, press the select and
confirm button on the right side of the
steering wheel to save the settings and exit.
8
35
Vehicle description
36
Vehicle description
Air conditioner
Front A/C control system 1
A/C control panel in multimedia
display screen
37
Vehicle description
In the A/C control panel on the multimedia display, the air outlet mode face blowing
button, the air outlet mode foot blowing button and the air outlet mode window
blowing button can all be used independently or combined as required.
38
Vehicle description
39
Vehicle description
Click the button to select the air outlet Press this button to manually switch
mode as the face blowing mode. between external circulation (fresh air)
9. Air outlet mode foot blowing button and internal circulation. In the automatic
Touch the button to select the air outlet air quality control system (AQS) mode,
mode as the foot blowing. the internal/external circulation vent
10. Air outlet mode window blowing button status is automatically adjusted
Touch the button to select the air outlet according to the outside air quality.
mode as the window blowing. When the air conditioner is off, press the
11. Seat heating/ventilation button* internal/external circulation switch
Click this button, and the multimedia button, and the air conditioner is still off,
display screen will automatically jump to but the internal/external circulation will
the seat heating and ventilation setting be switched.
interface. 17. Dual zone control button
12. OFF button Click the button to enable the dual zone
When the air conditioner is working, control function. Then, the button icon
press OFF button and the running of the will be highlighted, and the temperature
entire A/C system will stop. on the driver's side and the front
13. AUTO button occupant's side will be adjusted
Press this button to enable the simultaneously. Click the
automatic mode of the air conditioner. synchronization button again, the button
When the automatic mode is enabled, icon will not be highlighted, and the
the air conditioning system will enter the temperature on the driver's side and
automatic control state according to the front occupant's side can be adjusted
set temperature. independently.
14. A/C button 18. Air volume adjustment button
Press this button to turn on the air Press this button to adjust the air
conditioner, and the A/C button indicator volume of the air conditioner.
will be on. Press this button again, the When the air conditioner is turned off,
button indicator will be off, and the operate the air volume adjustment
compressor will be turned off. button, and the air conditioner will be
When the air conditioner is off, press A/ activated for operation.
C button and the air conditioner is 19. Front occupant side temperature
activated. adjustment button
15. A/C MAX button Adjust the temperature at the front
Touch the A/C MAX button, and the set occupant side. Touch ∧ or ∨ above
temperature is automatically adjusted to and below the temperature value, to set
the minimum, and the air volume to the the temperature higher or lower by 0.5°
maximum. C. The temperature setting range of the
16. Interior/exterior circulation switch button air conditioner is 17.5 ℃~31.5 ℃. When
40
Vehicle description
6
1. Central air vent
2. Side air vent
41
Vehicle description
42
Vehicle description
Automatic lighting
After the vehicle is powered on, the light
control switch is in the AUTO gear, and the 7
automatic lighting is turned on by default.
The automatic lighting system automatically
controls the on and off of the headlights
according to the external light intensity to
achieve automatic control of position lamp 8
and low beam headlights.
43
Vehicle description
44
Vehicle description
be off temporarily when the turn signal lamp Follow Me Home timing
is working.
1
Follow Me Home
Enable Follow Me Home
3
On the multimedia display screen, click Set
up → Vehicle Setting → Lamp. Select the
timing in the setting interface of Follow Me
Home as required. When Follow Me Home
On the multimedia display screen, click Set
is enabled, the timer is set to the preset
up → Vehicle Setting → Lamp in turn.
timing. Before the timer exceeds, if any door
4
Select any timing in the setting interface of
(including trunk door) is opened and all
Follow Me Home, and Follow Me Home is
doors are closed, the timer will be reset to
enabled.
the preselected timing time.
When the vehicle anti-theft is the disarming
Wiper control combination
state and Follow Me Home is not disabled in
switch 5
the multimedia display screen, turn the light
combination switch to the AUTO position, Wiper control combination
Follow Me Home can be activated switch
automatically after the vehicle is locked.
Disable Follow Me Home 6
Follow Me Home will be temporarily
disabled if any of the following conditions is
met:
• Vehicle power supply is not turned off.
• Timeout.
7
• High beam lamp is on or flashing.
45
Vehicle description
When the windshield is dry, do not perform automatic wiping operation. The
use wipers. Otherwise the wipers will wiping speed is automatically adjusted by
scratch the windshield and affect service life the wiper control system as per rainfall.
of wiper blades. Low-speed wiping of wipers
If there is dust or sand on windshield, use Turn the adjustment knob to the low-speed
wipers after cleaning the dirt at first. gear position in the direction A, and the
Otherwise the wipers will scratch the wiper will perform the low-speed wiper
windshield and affect service life of wiper operation.
blades. High-speed wiping of wipers
Turn the adjustment knob to the high-speed
Operations of wiper combination
position in the direction A, and the wiper
switch
will perform the high-speed wiping
operation.
Front windshield washing
Turn the adjustment knob to the position
in the direction B and keep it still. When the
windshield washer sprays water, the wiper
wipes. When the adjustment knob is
released, the washer stops spraying water.
After cleaning, the wiper remains active for
three cycles. After the interval of 5 seconds,
the wiper wipes for one cycle.
Wiping of rear wipers
Wiper inching wiping Press and release the tail button of the
Turn the adjustment knob to the position wiper control handle to select the first gear,
in the direction B for a short pause, and then and the rear wiper will continuously wipe.
release the adjustment knob. The When the first gear is selected again, the
adjustment knob will automatically return to rear wiper will stop wiping.
the gear position , and the wiper will Washing of rear windshield
perform the inching operation once. Press the button at the end of the wiper
Wipers off control handle to select the second gear.
Turn the adjustment knob to the gear When the rear windshield washer sprays
position to turn off the wiper. water, the wiper wipes. After releasing the
Wiper intermittent wiping button at the end of the wiper control
Turn the adjustment knob to the position handle, the washer stops spraying water,
in the direction A, and the wiper will perform the wiper wipes again several times and
intermittent wiping operation. then resets, and the rear wiper continuously
Automatic wiping of front wipers wipes at the same time.
Turn the adjustment knob to the position
in the direction A, and the front wiper will
46
Vehicle description
Type I 3
1. Front interior lamp switch
2. Interior lamp door-control switch
Click the front interior lamp switch to turn on
or off the front interior lamp.
Click the interior lamp door-control switch to
4
enable or disable the interior lamp door-
control function.
47
Vehicle description
Foot lamp*
48
Vehicle description
49
Vehicle description
• Push this button upward to return to • Push this button upward to increase
the original set cruise speed or the cruise speed.
increase the cruise speed. • Push this button downward to
• Push the button downward to set the decrease the cruise speed.
current vehicle speed to the cruise • Press this button to activate the
speed or reduce the cruise speed. function of the cruise control system.
3. Speed limit button: enable the active 3. Talk button: press and release this
speed limit function, and set the speed button to answer or hang up a Bluetooth
through the speed adjustment and call; press and hold this button to reject
setting button. The speed limits of LIM is an incoming call.
30-160 km/h. 4. CarPlay button*: CarPlay function is
4. Headway increasing button: increase enabled/disabled(reserved).
the following distance of intelligent pilot/
adaptive cruise system.
5. Talk button: answer/hang up a call.
6. CarPlay button*: CarPlay function is
enabled/disabled(reserved).
7. Headway decreasing button: decrease
the following distance of intelligent pilot/
adaptive cruise system.
Type II
50
Vehicle description
7
The exterior rearview mirror adjustment
switch is on the trim panel of the driver side
door.
1. When the vehicle is in the ON or ACC
gear, rotate the exterior rearview mirror
8
51
Vehicle description
52
Vehicle description
Click on the multimedia display screen in On the multimedia display screen, click Set
sequence: Set up → Vehicle Settings → up → Vehicle Setting → Rearview mirror in
Rearview Mirror, open or close automatic sequence, and in this interface, select to set
folding function of locking exterior rearview the automatic tilt function of the reverse 4
mirror in the interface. exterior rearview mirror.
When the exterior rearview mirror In the multimedia interface, select four
adjustment switch is in the unfolded gear modes: Full Tilt, None, Left and Right. The
and the exterior rearview mirror is in the corresponding mode can be selected
folded state triggered by the locking action according to the actual driving situation to 5
of the vehicle, the exterior rearview mirror improve the safety during reversing.
will automatically unfold after the vehicle is
Electrical heating & defrosting
unlocked or the vehicle is started. function of exterior rearview
When the exterior rearview mirror mirrors
adjustment switch is at the unfolded gear 6
and the exterior rearview mirror is in the Press the Exterior Rearview Mirror/Rear
unfolded state, the exterior rearview mirror Windshield Defrosting and Defogging button
will automatically fold after the vehicle is on the front air-conditioning control panel,
locked. and the button indicator is on. The heating
of exterior rearview mirror and the defrosting
7
of rear windshield are activated
simultaneously, and automatically
deactivated after a period of operation. The
time depends on the ambient temperature.
The lower the ambient temperature, the
longer the heating time.
8
53
Vehicle description
54
Vehicle description
Remote opening/closing of
windows
When the vehicle power supply is in the
OFF gear and the protective cover of the
5
charging port cover, the trunk door, the front
hood and the four doors are closed, press
and hold the unlock button on the smart key,
and the four windows will open at the same
time. Press and release the lock button on 6
the smart key to close the four windows at
1. Window locking switch
the same time.
2. Left front window switch
3. Right front window switch Window locking switch
4. Right rear window switch Press the switch to enable the locking 7
5. Left rear window switch function. The window locking switch
Manual operation indicator is on. Disable the switch operation
of the front occupant side window and the
Open: press down on the window switch
rear window. The front occupant side
and hold to open the window.
window and the rear window can still be 8
55
Vehicle description
raised or lowered through the driver side The self-learning steps are as follows:
window switch. 1. Pull the window switch up to the manual
Press the window locking switch again, the up-shifting position until the window
window locking switch indicator will be off, glass has fully risen to the top position,
and the locking function will be disabled. then pull up the window switch again
Power window over-temperature and hold it for more than 2 seconds
protection before releasing it;
2. Press down the window switch to the
If power window is operated repeatedly in a
manual down-shifting position until the
short time, the control switch for the power
window glass fully lowers to the bottom
window may fail to protect the motor service
position, then press down the window
life. Wait for a while to resume the power
switch again and hold it for more than 2
window operation.
seconds before releasing it;
If the waiting time for automatic 3. Complete the rise and fall of other
recovery is long and you need to glasses again to complete self-learning;
operate the window immediately, you can 4. If the power window does not work
power off and restart the vehicle to operate properly after the above operations,
the power window. please go to Geely Service for
maintenance.
Anti-pinch function
Delay operation function
During the automatic closing operation, if an
object is caught between the glass and the When the vehicle power supply button is
window frame, the window will automatically placed in the OFF position, and if the
stop and return to the initial state. If the following three conditions are met, the
window is violently impacted, this function operation of the window can be maintained
may work even if no objects are caught. If through the window switch.
the anti-pinch function of power windows 1. The vehicle power is switched to OFF
does not work properly, adaptive-learning of within 60 seconds.
power windows is required. 2. Left and right front doors are not
Adaptive-learning of anti-pinch opened.
power window 3. The smart key is not operated to unlock/
lock the vehicle.
If the battery of the vehicle is reconnected or
does not work properly after power failure,
the power windows will need to re-learn the
anti-pinch function.
56
Vehicle description
57
Vehicle description
Sun visor
Sun visor and makeup mirror
Turn down the sun visor or pull it out of the
bracket and turn it towards the door to
reduce glare.
Type I
Type II
58
Vehicle description
Storage space
Front storage 1
59
Vehicle description
60
Vehicle description
Rear storage
1
61
Vehicle description
1. The magazine bag is located on the When the trunk door is opened, the left trunk
back of front seat and is used to contain lamp is on automatically.
small objects like newspaper, maps etc.
Do not put any pet in the trunk.
Do not put heavy or sharp objects in
the magazine bag to avoid damage to
the magazine bag.
2. The storage box at the rear of the • If the weight of loaded goods exceeds
auxiliary instrument panel can be used the loading capacity of the vehicle, or the
to store smaller items. weight distribution of the vehicle is
Rear center armrest uneven after being loaded, the
driveability of the vehicle will be affected
seriously and the driving safety will be
reduced. Luggages in the loading area
will move in case of a traffic accident or
emergency braking. Try to place objects
at lower and forward position; namely,
place them as close as possible to rear
seat backrest.
• When loading high or large objects, the
size of the objects shall not exceed the
height of the seat back and the
compartment, and the objects must be
The rear center armrest is in the middle of
fixed on the vehicle to ensure driving
rear seat backrests. Pull it downward to
safety.
open and use it. Open the center armrest to
use the rear cup holder.
Trunk storage
62
Vehicle description
63
Vehicle description
64
Safe travel
Seat belt
Seat belt overview 1
All occupants must wear seat belts
correctly when the vehicle is driven. In
the event of emergency braking or accident,
wearing seat belts correctly can reduce the
degree of injury to occupants. 2
• Failure to wear the seat belt or
improperly wearing the seat belt may
cause serious injury or death!
• Seat backrest shall be vertical and the
• No occupant is allowed to sit in area
back shall cling to backrest fully. 3
without a seat and seat belt or in a seat
• The seat belt should be flat.
with a damaged seat belt.
• The shoulder belt should be fastened
• Each seat belt can only be used by one
across shoulder and chest.
person. Do not share a seat belt with
• The crotch strap should be as low and
more than one person (including
close to the hips as possible. 4
children).
Fasten the seat belt (for the pregnant)
• Do not hang the shoulder belt on the
Before driving a vehicle, pregnant women
neck or pass through the armpit.
should consult with a doctor to see if she
• Do not remove, disassemble or
can drive the vehicle. The method for
reconstruct the seat belt.
pregnant women to wear seat belts is 5
• The seat belt in the vehicle is mainly
basically the same as that for normal use of
designed according to the body shape of
seat belts, but the following matters should
adults, and children should wear
be noted:
appropriate child safety devices.
1. Lower the waist seat belt as much as
• Do not use bleach, dyes or chemical
solvents to clean the seat belt.
possible and place it under the bulging 6
abdomen.
Wear seat belt properly 2. The shoulder belt should pass through
the shoulder, but should avoid the
When driving, do not tilt the seat back
abdomen so that it is on the chest.
too much, stretch your head or arm
out of the window or lean forward too close If the pregnant woman uses the seat 7
to the airbag to avoid serious casualties. belt incorrectly, the seat belt may
cause serious casualties to the mother and
fetus in case of emergency braking or
collision.
8
65
Safe travel
66
Safe travel
Shoulder belt height adjuster to contact the Geely Service to replace the
pretensioner, and it may be necessary to
The vehicle is equipped with a shoulder belt 1
replace other parts of the seat belt system.
height adjuster at the driver's and front
occupant's seating positions. Seat belt unfastening warning
Adjust the shoulder belt height adjuster so Driver seat belt unfastening warning
that the shoulder belt part of the seat belt is When the driver does not fasten the seat
centered on the shoulder. The seat belt belt, the driver's seat will display red on the 2
shall be far away from the face and neck, instrument cluster display, and the warning
and shall not slide under the shoulder. lamp for unfastened seat belt will also be on.
Incorrect adjustment of the shoulder belt Front occupant seat belt unfastening
height will reduce the effectiveness of the warning
seat belt in the event of a crash. When the front row occupant seat is loaded 3
with occupants and the front row occupants
are not wearing seat belts, red will be
displayed on the front row occupant seat in
the instrument cluster display, and the
warning lamp for unfastened seat belts will
4
also be on.
Rear occupant seat belt unfastening
warning
When the rear occupant seat is loaded with
occupants and the rear occupant does not
fasten the seat belt, red will be displayed on
5
Press the button as shown above and move the rear occupant seat in the instrument
the height adjuster to the desired position. cluster display, and the warning lamp for
Move up the adjuster by pressing the button unfastened seat belt will also be on.
and pushing the slider trim panel upwards. Alarming lamps and buzzer
After moving the adjuster to the desired • When the vehicle power supply is in the 6
position, release the button and try to move ON gear or the vehicle is started, the
the adjuster down to make sure it is locked seat belt alarm will not be triggered
in place. whether the seat belt is fastened or not.
When the vehicle power supply is in the
Seat belt pretensioner 7
ON gear or the vehicle is started, if the
The seat belt is equipped with a seat belt driver's or front occupant's seat belt is
pretensioner. In case of vehicle collision, it not fastened, the seat belt unfastening
will tighten the seat belt to ensure the safety warning lamp will be on, and it will not be
of occupants. The pretensioner can only off until the driver's or front occupant's
work once. After a collision, it is necessary seat belt is fastened. After the buzzer is 8
67
Safe travel
68
Safe travel
69
Safe travel
During the use of the vehicle, do not Side airbags are mounted in the backrests
sit on the side of the seat or lean of the driver seat and front occupant seat,
against the instrument panel, because any where they are marked with "AIRBAG".
person standing against or very close to the
Due to the considerable speed and
airbag may be seriously injured or killed
strength of the side airbag when it is
when the airbag inflates. The occupants
deployed, it is prohibited to put your head
must keep at least 25 cm away from the
and hands outside the window or close to
airbags.
the deployed area of the side airbag when
When the following conditions occur, the vehicle is driving, otherwise serious
contact the Geely Service casualties may occur to occupants.
immediately:
It is forbidden to install seat cover on
• After the front airbag is deployed. the seats equipped with side airbags.
• The front part of the vehicle was hit, but it Otherwise, it may affect the deployment of
did not cause the front airbags to deploy. the side airbag.
• The front airbag cover is cracked,
scratched or damaged in other forms.
70
Safe travel
71
Safe travel
• The door is impacted, though the side Deployment of side airbags and
airbag isn't triggered to deploy. side airbag curtain*
• When the front pillar, rear pillar and roof
side member decoration or ceiling fitted
with the side airbag curtains have been
scratched, cracked or damaged in other
forms.
Before consulting the personnel of
Geely Service, do not make any of the
following changes that may affect the
normal operation of side airbag curtains:
• Install electronic devices such as mobile
two-way radio communication devices.
• Refit suspension system. In case of moderate to severe side impact of
• Repair at or near the bracket. the vehicle and the designed value is
Deployment of airbag reached, the front side airbag and side
Deployment of front airbag airbag curtain (if equipped) can be
deployed.
The front airbag deploys when the vehicle is In case of side collision, the deployment of
in a moderate to severe frontal collision at a side airbag and side airbag curtain can
speed of 25 km/h or above. reduce the risk of upper body and pelvis
injury.
In the event of a collision, whether the • When the vehicle falls down to a trench
airbag works depends on the collision or pit suddenly.
object, the collision direction and the speed • In case of crash (underrun crash) against
of vehicle deceleration caused by the the rear of truck.
collision. In case of severe frontal collision, • Rollover.
the front airbag will deploy. • Side collision, rear collision and slight
head-on collision.
72
Safe travel
73
Safe travel
0 <10KG X U X
0+ <13 KG X U X
Ⅰ 9-18 KG UF U X
Ⅱ 15-25 KG UF U X
Ⅲ 22-36 KG UF U X
Note: the meanings of the keywords entered in the table above are: U = Generic child
restraint system applicable for the mass group certification; X = child restraint system with
seat position not applicable for the mass group.
Information on the availability of child safety seats on vehicle seats, on condition that the child
safety seats are secured with an ISOFIX child restraint system:
Group0: <
E X IL X
10KG
C X IL X
Group0+:<13K
D X IL X
G
E X IL X
A X IUF X
B X IUF X
Group I:9-18KG B1 X IUF X
C X IL X
D X IL X
Group II:15-
- X IUF X
25KG
Group III:22-
- X IUF X
36KG
74
Safe travel
For child restraint systems not classified according to ISO/XX dimensions (A-G), and for the
applicable mass group, the vehicle manufacturer shall describe the ISOFIX child restraint
system specific to the vehicle recommended for each seating position.
1
Note: The meanings of the keywords entered in the table above are: IUF = Frontal generic
ISOFIX child restraint system applicable for the mass group certification; IL = special ISOFIX
child restraint system applicable for the list. These restraint systems may be used for special
vehicle types 475, restricted types or semi-generic types. X = ISOFIX position is not
applicable for the ISOFIX child restraint system of that mass group and/or that size level. 2
A – ISO/F3: Full height forward toddler CRS
B – ISO/F2: Reduced height forward toddler CRS
B1–ISO/F2x: Reduced height forward toddler CRS
C – ISO/R3: Full size backward toddler CRS
D – ISO/R2: Reduced size backward toddler CRS 3
E – ISO/R1: Backward toddler CRS
F – ISO/L1: Left lateral position CRS (load bearing folding bed)
G – ISO/L2: Right side position CRS (CarryCot)
Make sure to stay away from the head restraints before installing all child restraint
systems.
4
75
Safe travel
76
Safe travel
When fixing the child restraint system Do not use any backward child
on the rear seat, please carefully read restraint system at a seat that is under 4
the instructions of the child restraint system frontal airbag protection (in activated state)!
to ensure that it is suitable for the vehicle It is forbidden to put a backward child
and installed correctly. restraint system on a front seat. Infants who
cling to or are too close to the air bag will be
seriously injured or killed when the air bag 5
inflates.
77
Safe travel
The special fixing interface specified in ISO 2. Confirm the position of ISOFIX fixed
is at the gap between the seat cushion and interface;
the seat back of two rear seats. Use the 3. Align the ISOFIX interface of the child
fixed interface to install the child restraint restraint system with the corresponding
system with standard ISO specification on ISOFIX fixed interface behind the seat,
the rear seat. It is not necessary to fix the and then insert it;
child restraint system with a seat belt at this 4. Check whether the latch is locked
time. Please follow the manufacturer's correctly;
instructions when installing and using child
restraint systems, otherwise the protection
effect may be affected.
78
Safe travel
79
Safe travel
80
Starting and driving
Driving in winter
Winter tire 7
It is recommended to use winter tires if you
often drive the vehicle on roads with ice or
snow. Although all-season tires can provide
excellent comprehensive performance on
most surfaces, they may be unable to 8
81
Starting and driving
82
Starting and driving
the unnecessary luggage on the vehicle 2. Drive at a low speed (less than 30 km/
shall be cleaned regularly. h), otherwise waves may form in front of
7. Plan the running route properly the vehicle, damage the motor controller
1
Optimize the route and try to avoid and other components, and make the
traffic jam. This will not only save time vehicle unable to drive.
but also reduce power consumption. 3. Do not park or reverse in water under
8. Do not change the size of the tire at will any conditions.
The use of larger or wider tires will result
2
When driving on water, mud and other
in increased power consumption.
roads, the braking effect may be
9. Driving mode selection
affected and the braking distance may be
The extreme endurance mode is used
extended, which may cause accidents!
when the vehicle is driving, which can
Avoid sudden or emergency braking
reduce the vehicle power consumption 3
operations immediately after driving through
and increase the endurance mileage.
water.
On the contrary, selecting sport mode
When the vehicle runs on the road with
will increase the power consumption of
water, the brakes must be cleaned and
the vehicle and shorten the driving
dried as soon as possible by intermittent
range. 4
braking. Brake when traffic conditions
Driving through water permit, to dry and clean the brakes and
avoid traffic accidents.
83
Starting and driving
84
Starting and driving
Gearshift operation
Gear information 1
85
Starting and driving
Forward
Start the vehicle in the parking gear (P) or
neutral gear (N), depress the brake pedal,
confirm that the parking brake has been
released, place the vehicle in the drive gear
(D), release the brake pedal, and gently
depress the accelerator pedal.
86
Starting and driving
87
Starting and driving
Do not use the cruise control system 1. Cruise control resuming button:
on winding, congested or slippery resuming cruise or canceling cruise
roads, or traffic accidents may occur. control related functions at the last
exiting speed.
Function selection
2. Switch for speed adjustment and setting
button:
• Push the button up
Push and release: cruise speed +1
km/h.
Push and hold: cruise speed +5 km/
h.
• Push the button down
Push and release: cruise speed -1
km/h.
Push and hold: cruise speed -5 km/h.
• Press the button
In the combination instrument display,
CC function is activated.
select the cruise control system via the
If the cruise control system is selected
menu switch button on the left side of
on the current instrument cluster
steering wheel. After selection, the cruise
display screen, accidentally touching the
control system will be on standby, and the
button to enter the cruise state may frighten
indicator of cruise control system (CC) will
the driver and cause the vehicle to lose
be on in white.
control.
Steering wheel control
Setting speed
When the cruise control is enabled, push
up/down the speed adjustment and setting
button to adjust to the required cruise
speed, and press this button to set the
current speed as the cruise speed.
88
Starting and driving
The system controls according to the pre- cruise control speed when the foot leaves
saved set speed. accelerator pedal.
1
Acceleration in cruise control Use of cruise control at ramp
The acceleration can be realized through The performance of the cruise control
either of the two methods: system at the ramp depends on the vehicle
• Depress the accelerator pedal to speed, load and the gradient of the ramp. It
increase speed. is necessary to depress and hold 2
• When the cruise control is enabled, push accelerator pedal to maintain vehicle speed
up and hold the vehicle speed when vehicle is climbing up the steep slope.
adjustment and setting button, and the When going downhill, brake or lower to a
speed will continue to increase at 5 km/h low gear to maintain the speed. Cruise
until the vehicle accelerates to the control will be turned off when brake is 3
desired speed or to the maximum set applied.
speed of 160 km/h, then release. To Ending cruise control
slightly accelerate, push the button up.
One short up-push and the vehicle speed The following methods can be used to end
cruise control:
will increase by 1km/h. One long up-push 4
and the vehicle speed will increase by • Depress the brake pedal to exit the
5km/h. cruise control system.
• Press and release the cruise control
Deceleration in cruise control
recovery button to exit the cruise control
If the cruise control system is enabled, system.
5
• Push down and hold the speed • Press and release twice or press and
adjustment and setting button, and the hold the cruise control recovery button to
speed will decrease constantly at 5 km/h close the cruise control system.
until the vehicle decelerates to the
Clearing vehicle speed memory
required speed or reaches the minimum
When the cruise control or vehicle power
6
set speed of 30 km/h, and then release it.
• To slightly decelerate, push the button supply is turned off, the cruise control set
down. One short down-push and the speed memory will be cleared.
vehicle speed will decrease by 1km/h. Automatic speed limit control
One long down-push and the vehicle system (LIM)
With the automatic speed limit control 7
speed will decrease by 5km/h.
system (LIM), the driving speed will not
Overtaking when using cruise exceed the preset speed limit.
control
Be sure to turn off the automatic
Increase vehicle speed with accelerator
speed limit control system after use to
pedal. Vehicle speed will decrease to preset 8
89
Starting and driving
90
Starting and driving
required speed limit. Press the button to set speed memory set by the automatic speed
the current speed as the speed limit. limit control will be cleared.
Adaptive cruise control 1
Resume speed limit
system (ACC)*
Deeply press the accelerator pedal during The adaptive cruise control system (ACC)
driving, and the automatic speed limit can control the vehicle speed based on the
control enters the driver's control state, and set speed and the inter-vehicle interval in
the indicator of automatic speed limit control the range of 0~150 km/h. 2
system is on in yellow. But the speed limit is ACC mainly provides driving assistance for
still memorized. When the accelerator pedal the driver on highways or elevated roads
is released, the automatic speed limit with good road conditions. The driver should
control resumes, and the indicator of keep control of the vehicle at all times.
automatic speed limit control system (LIM) ACC uses a medium-range radar to detect 3
is on in green. the vehicle ahead, and maintain the inter-
Use of automatic speed limit vehicle interval set by the driver through
control at ramp automatic speed adjustment. The driver can
control the vehicle at any time according to
When the vehicle runs downhill, the
driving conditions. 4
automatic speed limit control system cannot
limit the vehicle speed, and the vehicle will ACC will start self-test when the
accelerate under its own gravity. At the time, vehicle is powered on, and the system
the vehicle speed should be reduced functions are unavailable at this stage.
immediately by pressing the brake pedal.
5
End of automatic speed limit
control
• ACC is only an auxiliary system, not a
• Press the button, the status indicator warning and collision avoidance system
of the automatic speed limit control in case of emergency, and cannot
system (LIM) will change from green to replace the driver to drive. The driver 6
white, and the automatic speed limit must always keep control of the vehicle
control will be in standby mode. and bear full driving responsibility for
• Press the button when the automatic vehicle control. The driver needs to drive
speed limit control is in the standby state, in accordance with laws and regulations.
and the automatic speed limit control will • ACC does not work on vehicles or 7
enter the off state. objects crossing the carriageway.
Clearing vehicle speed memory • The change of vehicle posture due to
excessive load in the luggage area and
When the automatic speed limit control or
other reasons will degrade or disable the
vehicle power supply is turned off, the
ACC target recognition performance. 8
91
Starting and driving
• When suddenly accelerating and vehicle, and the preceding vehicle jumps
approaching the vehicle ahead at high into the lane closely, etc.), ACC does not
speed (an obvious speed difference with have enough time to reduce the relative
the vehicle ahead), the driver should speed. In this case, the driver must
brake in time. respond appropriately.
• When driving on a steep downslope, it • If the preceding vehicle suddenly brakes,
may be difficult for this function to keep a ACC may fail to respond timely or react
proper distance from the vehicle ahead. too slowly. In this case, the driver will not
Under such circumstances, be especially receive the takeover request. Active
careful and be ready to brake at any braking is required.
time. Do not use ACC under heavy load. • At a sharp turn, e. g. a serpentine road,
• ACC cannot identify tricycles, vehicles ACC cannot detect the preceding vehicle
carrying irregular shaped goods or normally due to the visual field limit of
vehicles with irregular shapes. front camera, which may lead to the
• ACC system does not recognize acceleration of ACC vehicle. The driver is
stationary or slowly moving vehicles required to respond appropriately based
stably and cannot recognize oncoming on actual conditions.
vehicles. • If the distance between the ACC vehicle
• If ACC is activated when the vehicle is and the adjacent lane is too small (or the
stationary, the system will recognize the vehicle on the adjacent lane is too close
static obstacle ahead as vehicle and to the lane of ACC vehicle), ACC may
keep still so as to ensure the safe starting react to the vehicle and brake.
of vehicle and avoid the collision with the In following situations, the driver must
stationary target due to unexpected be especially alert:
starting. Static targets include but are not
• When ACC is activated and confirmed to
limited to speed bumps, trees, people,
start with the vehicle stationary, if there
railings, etc.
are pedestrians, children, animals, two-
• When ACC works, if the driver applies
wheeled vehicles, tricycles or obstacles
the accelerator pedal, the vehicle will be
ahead, ACC cannot detect and identify
taken over by the driver, and respond to
them, and there is a serious collision risk.
the driver's acceleration desire. ACC
The driver must confirm the area ahead
control function will not work.
of vehicle is safe before activating ACC
• When entering/exiting a curve, the target to control the vehicle to start.
selection may be delayed or disturbed.
• In case that the vehicle speed is high, if
ACC may have unexpected braking or
the left turn signal lamp is turned on
late braking.
when overtaking from the left, ACC will
• In some cases (the speed of preceding automatically accelerate the vehicle and
vehicle is too low relative to your own shorten the distance to the preceding
92
Starting and driving
Function selection
5
93
Starting and driving
3. Speed adjustment and setting button • Select to enable ACC. The ACC
• Push the button up indicator on instrument cluster
Push and release: cruise speed +1 display is on in white.
km/h. • Press the brake pedal or activate the
Push and hold: cruise speed +5km/h. AUTO HOLD function.
• Push the button down • Press the ACC button or the speed
Push and release: cruise speed -1 adjustment and setting button to
km/h. activate ACC, and the ACC status
Push and hold: cruise speed -5km/h. indicator on the display screen of the
• Press the button instrument cluster is green.
ACC function is activated. • When the brake pedal is released,
4. Inter-vehicle interval decreasing button ACC system can continue to keep
Press and release this button to the vehicle stationary.
decrease the following distance of ACC • The driver is required to press the
system. ACC button again or depress the
accelerator pedal to make ACC
Activate the ACC system, the
control the vehicle to start.
following conditions must be met:
• The ACC system controls the vehicle
according to the set cruise speed.
• Press ACC switch button to exit the ACC 2. When the vehicle is in motion, activate
system. and set the vehicle speed as follows:
• The gear is in the drive gear (D). • Select to enable ACC. The ACC
• The indicator of the instrument cluster is indicator on instrument cluster
ready for operation. display is on in white.
• The four doors, trunk and front • Press the ACC or speed adjustment
compartment hood are all closed. and setting button to activate ACC.
• The vehicle is in motion, and the brake When the cruise speed is set at 30
pedal is not applied. km/h, the ACC status indicator on
• No fault on brake disc. the display of the instrument cluster
• The front camera has no problems such will be on in green. When the self
as high temperature, dirt or failure. driving speed is below 30 km/h, the
• ESC function ON status. cruise set speed is 30 km/h. If the
• EPB is released. self driving speed is within 30~150
• The driver fastens the seat belt. km/h, the cruise set speed is the
current self driving speed.
Speed activation and setting
• The ACC system controls the vehicle
1. When the vehicle is stationary, activate according to the set cruise speed.
and set the vehicle speed as follows:
94
Starting and driving
3. Push the speed adjustment and setting If the ACC system is not activated, the set
button to set the required cruise speed. vehicle speed 3 is white.
During cruising, as the relative vehicle If the ACC system is activated, the set
1
speed varies, the instrument cluster will vehicle speed 3 is green.
display different distance states away from In addition, if ACC is not activated during
the preceding vehicle to remind the driver. this journey, the set speed will not be
displayed after the function menu switch
button on the left side of the steering wheel 2
is pressed and the function is selected for
the first time.
95
Starting and driving
When the automatic identification gear levels: near, medium and far. Every
speed limit is activated, it may happen time the vehicle is started, the default inter-
that the cruise speed does not change with vehicle interval of the ACC system is far.
the speed limit, such as the speed limit Different options for inter-vehicle
value is lower than the threshold value or interval are displayed on instrument
the difference between the speed limit value cluster display.
and the current target speed value is greater
than the threshold value; Meanwhile, due to
the influence of light and the position of road
signs, speed limit misidentification or
missing identification may occur. The driver
must not rely on the integration system to
determine the appropriate cruise speed, but
liable to select the appropriate cruise speed
according to the actual road conditions.
96
Starting and driving
97
Starting and driving
• The current vehicle speed exceeds 60 At overtaking assist mode, the driver
km/h. needs to control the lane change on
• The current lane is dotted. their own.
• The set speed should be high enough for Please note that this function can be
a safe overtaking. enabled in more situations besides
• Turn on the left turn signal lamp. overtaking. E. g., when the left turn signal
In the overtaking assist mode, unexpected indicator is turned on to change lanes or
acceleration may occur in the following enter another road, the vehicle will briefly
situations, which requires special accelerate.
awareness of the driver. Therefore, at the
overtaking assist mode, the driver should Start-stop mode
prepare for sudden change of conditions In the cruise following mode, if the
and control the vehicle in time. preceding vehicle brakes and stops
• The vehicle is approaching the turning gradually, your own vehicle will follow the
exit, and the exit direction is the same as preceding vehicle to stop gradually, and
that of usual overtaking. keep a safe distance from it.
• Before the vehicle passes through and • Within 3 seconds after stopping, if the
enters the overtaking lane, the speed of preceding vehicle resumes traveling, the
preceding vehicle decreases. cruise will resume automatically.
• The speed of vehicle in the overtaking • When it's more than 3 s after stopping, if
lane decreases. the preceding vehicle resumes, the driver
At the overtaking assist mode, unexpected needs to apply the accelerator pedal or
deceleration may occur in the following press the intelligent driving button to
situations, which requires special resume cruising.
awareness of the driver. Therefore, at the • In ACC start-stop mode, the longest time
overtaking assist mode, the driver should to keep the vehicle stationary is 3
prepare for sudden change of conditions minutes. After 3 minutes, EPB is
and control the vehicle in time. activated, and the ACC system exits.
• The speed of vehicle in the overtaking • In ACC start-stop mode, if the driver
lane is lower than your vehicle speed. actively exits the ACC, the vehicle will
• The longitudinal distance between the not start automatically. If the accelerator
vehicle in the overtaking lane and your pedal is pressed at this time, the vehicle
own vehicle is close. starts, and the driver needs to take
• The vehicle in the overtaking lane is control of the vehicle and drive safely.
large with long body, and parallel to your After stopping, the ACC system can
own vehicle. still control the vehicle to move, which
may result in uncontrolled vehicle
movement. If the vehicle moves
98
Starting and driving
99
Starting and driving
100
Starting and driving
keep a distance from the preceding vehicle • If the preceding vehicle suddenly brakes
and always be responsible for controlling (emergency stop), the ICC system will be
and controlling the vehicle. The driver needs unable to respond in time or respond too
1
to drive in accordance with laws and slowly. The driver will not receive a
regulations. takeover request in this case.
• At a sharp turn, e. g. a serpentine road,
Under the following circumstances,
ICC system cannot detect the preceding
the recognition performance of the
vehicle normally due to the visual field 2
ICC system may be degraded or
limit of medium-range radar, which may
unrecognized, and the driver needs to
lead to the acceleration of ICC vehicle.
actively control the vehicle and brake in
time. • When the vehicle ahead in the adjacent
lane jumps into the route of ICC vehicle,
• There are some changes of vehicle detection may be affected or delayed in 3
posture due to excessive load in the some environments such as low
luggage area and other reasons. reflection intensity of targets (tricycles),
• The ICC system cannot identify tricycles electromagnetic interference, etc.,
and vehicles loaded with irregularly resulting in the ICC system unable to
shaped goods. identify targets or accurately calculate 4
• The system does not recognize the distance from the preceding vehicle.
stationary or slowly moving vehicles Under such circumstances, the ICC
stably and cannot recognize oncoming system will have no response or braking
vehicles. delay.
• The system cannot recognize vehicles or • When the ICC system follows the 5
objects crossing the carriageway. preceding vehicle to cross the
• If another vehicle jumps the line to the intersection, your vehicle will move
front of vehicle at low speed, ICC may be laterally with the preceding vehicle.
too late to respond. There is risk of side collision with the
• When suddenly accelerating and adjacent lane. 6
approaching the vehicle ahead at high The driver should adjust the following
speed (an obvious speed difference with distance according to the traffic flow
the vehicle ahead). ahead, the weather conditions, such as rain
• In some cases (the speed of the and snow, and make proper settings for the
preceding vehicle is suddenly too low ICC system. The driver should be able to 7
relative to the speed of the self driving actively control the vehicle at any time to
vehicle, the preceding vehicle cuts into ensure driving safety.
the self driving lane at a short distance, Do not use the ICC system under
etc.), the ICC system does not have heavy load.
enough time to reduce the relative 8
speed.
101
Starting and driving
If ICC is activated when the vehicle is In following situations, the driver must
stationary, the system will recognize be especially alert:
the static obstacle ahead as vehicle and
• When the ICC system is activated and
keep still so as to ensure the safe starting of
confirmed to start with the vehicle
vehicle and avoid the collision with the
stationary, if there are children, animals,
stationary target due to unexpected starting.
tricycles or obstacles ahead of vehicle,
Static targets include but are not limited to
the ICC system cannot detect and
speed bumps, trees, people, railings, etc.
identify them, and there is a serious
When the ICC system works, if the collision risk. The driver must confirm the
driver applies the accelerator pedal, area ahead of vehicle is safe before
the vehicle will be taken over by the driver, activating the ICC system to control the
and respond to the driver's acceleration vehicle to start.
desire. The ICC system's control function • If the left turn signal lamp is turned on
will not work. when overtaking from the left, the ICC
system will automatically accelerate the
When entering/exiting a curve, the
vehicle and shorten the distance to the
target selection may be delayed or
preceding vehicle. If the vehicle enters
disturbed. ICC may have unexpected
the overtaking lane and there is no
braking or late braking.
vehicle ahead, the ICC system will
If the distance between the ICC automatically accelerate to the set cruise
vehicle and the adjacent lane is too speed.
small (or the vehicle on the adjacent lane is • The ICC system cannot detect the items
too close to the lane of ICC vehicle), the ICC loaded or accessories mounted on the
system may react to the vehicle and brake. target vehicle that protrude from its side,
rear end or roof. If the preceding vehicle
The visual field of the front camera has the above-mentioned special load or
shall not be blocked by pollutants. equipment, the ICC system must be
Especially, when it's completely covered by turned off when overtaking such
snow, the ICC system will exit, and the vehicles.
information of system exiting will be • Towing a trailer will reduce the dynamics
displayed to the driver through the of the ICC system.
instrument cluster. • For safety concern, do not use the ICC
system when the visibility is poor, or
The installation of the front camera
when driving along slopes and curved
may be affected by vibration or
sections, or on slippery roads (such as
impact, which will degrade the system
snow, ice, moisture or water sections).
performance. In that case, it is necessary to
• After the system requires the driver to
recalibrate the front camera.
take over the vehicle, if the vehicle
102
Starting and driving
continues to move, the driver must apply • The ICC system is inapplicable to roads
the brake pedal to brake. of which the lanes increase or decrease.
• If the driver is prompted to take over the • The ICC system is inapplicable to roads
1
vehicle on the instrument cluster display, that the original lane and the new lane
the driver must immediately control the have large difference.
distance from the preceding vehicle. • The ICC system may recognize road
• The driver must always be ready to edges (wall, guardrail, curb, grassland,
control the vehicle by acceleration or green belt, asphalt seam connection) as
2
braking. lane lines to work.
• The front camera is installed behind the • The ICC system is inapplicable to
windshield of the vehicle. If the front pavements with potholes, bumps,
camera is covered by dirt, which makes undulations.
the ICC system unable to work, the • The ICC system cannot recognize road 3
instrument cluster display will display a signs (cones), so it is not applicable to
text prompt. Timely clean or go to Geely construction pavement.
Automobile Service for inspection and • The ICC system cannot be applied to
maintenance. sudden changes in light, including but not
• The front and surrounding area of the limited to entering/exiting the tunnel. 4
front camera shall not be blocked by • The ICC system is inapplicable to ultra-
other objects (such as license plate wide/ultra-narrow roads.
cover), otherwise the ICC system may be • The ICC system is inapplicable to zigzag
affected. roads.
• Structural modifications to vehicles, such • The ICC system is inapplicable to steep 5
as lowering the ride height or changing downhill roads.
the front license plate mounting plate, • The ICC system is inapplicable to bad
may affect the ICC system. weather with reduced visibility.
Under the following road conditions, At the entrance of highway or trunk road,
the performance of ICC direction due to the change of road, The ICC system 6
assist will degrade or fail to work. The driver cannot change lane and the function may be
should keep alert. degraded. Only ACC is available.
• The ICC system is inapplicable to roads The ICC system cannot work under complex
with excessively small curve radius. road conditions, e. g.: severely congested
• The ICC system is inapplicable to roads road, complicated traffic changes, crossing, 7
with invisible lane lines. intersections, ramps, lost lane lines, etc.
The driver needs to supervise and take
• The ICC system is inapplicable to
control of the function. The ICC system only
intersections of roads.
provides comfort experience under suitable
• The ICC system is inapplicable to roads
with vehicle marks (e.g., tire marks).
8
103
Starting and driving
road conditions. The driver should is fully Press and release this button to
responsible for safe driving. increase the following interval of the
ICC system.
Function selection
3. Speed adjustment and setting button
• Push the button up
Push and release: cruise speed
+1km/h or resume the cruise speed
originally set by the driver.
Push and hold: cruise speed +5km/h.
• Push the button down
Push and release: cruise speed -1
km/h.
Push and hold: cruise speed -5km/h.
4. Inter-vehicle interval decreasing button
Press and release this button to
On the multimedia display screen, click Set
decrease the following interval of the
up → Auxiliary Driving → CCM in turn, and
ICC system.
enable/disable the intelligent navigation
function in this interface. Activate the ICC system, the following
Function activation conditions must be met:
104
Starting and driving
105
Starting and driving
control and lane keeping control; Yellow- direction according to the driving track of the
green when the ICC system only performs vehicle in front, and the self driving vehicle
cruise control; Gray when the ICC system follows the preceding vehicle to slowly move
fails. laterally. Therefore, the ICC system can
Set speed 7: if the ICC system function is continue to maintain cruise control and
not activated, the set speed 7 is black. If the direction control. Then, drivers need to pay
ICC system function is activated, the set special attention to the traffic conditions on
speed 7 is green. In addition, if the ICC the side of their own vehicles.
system is turned on, after pressing the main
Release warning
switch, the set speed 7 is "- km/h" and black.
Cruise control system
The cruise setting speed adjustment and
inter-vehicle interval adjustment methods of
the ICC system are the same as those of
the ACC system. The relevant ICC system
function modes and precautions are the
same as those of the ACC system. For
details, please refer to the introduction of
"Adaptive Cruise Control System (ACC)".
Direction assist control
When the ICC system is activated, identify
the lane lines on both sides. The system can The precondition of the ICC system is that
control the self driving vehicle to keep the driver holds the steering wheel with both
driving in the middle of the lane. Then, the hands. The system will continuously monitor
lane shading in the instrument will be this. If the release time exceeds a certain
highlighted. time, the instrument cluster will display a
If one or both lane lines are lost, the release warning message to remind the
intelligent pilot will no longer maintain the driver to hold the steering wheel with both
middle control of the lane, but the cruise hands. If the driver has not responded, the
control will continue to maintain. Then, the ICC system will exit after the release
ICC status indicator will be on in yellow. If warning message is displayed for the
the intelligent pilot recognizes the lane lines second time.
on both sides again, it will automatically If the driver puts his hand on the steering
resume the lane middle control. Then, the wheel gently for a long time, a release
ICC status indicator is on in green. warning may appear. Then, hold the
When the vehicle follows the preceding steering wheel tightly.
vehicle at a low speed, the lane line is
blocked by the preceding vehicle or lost
temporarily. The ICC system can control the
106
Starting and driving
107
Starting and driving
departure alarm, lane departure assistance the lane unconsciously. Unconscious lane
and lane keeping system. departure includes the already happened
lane departure and the imminent lane
When the vehicle is powered on, the
departure.
lane keeping assist system will start
Lane departure prevention (LDP)
self-check, and the system function is not
As for lane departure prevention (LDP),
available at this stage.
when the vehicle approaches lane lines and
Make sure the front camera surface is there is a risk of deviation, the system will
clean. Road conditions such as assist the driver to control the vehicle back
unclean front camera, bad weather and to the lane by applying torque to steering
fading lane markings may affect the wheel.
performance of the lane keeping assist Lane keeping system (LKS)*
system. LKS will assist the driver to control the
vehicle to keep driving in the middle of the
The lane keeping assist system is
lane by applying torque to the steering
only suitable for the use on
wheel.
expressways and urban main roads, and the
LKS can only work when the left and right
driver should be concentrated on driving.
lane lines are recognized at the same time.
When using the lane keeping assist system,
hold the steering wheel and pay attention to The driver shall keep his attention and
the road and surrounding traffic. Do not use judgment at all times to ensure the
this function in urban streets, construction safe driving of the vehicle, keep a proper
areas, narrow paths, or roads where cyclists distance from other vehicles, and comply
or pedestrians exist. Do not rely on the lane with current traffic laws and regulations.
keeping assist system to determine the
Function selection
appropriate driving route. Be sure to take
measures at any time and in a timely
manner. Failure to follow these instructions
may result in serious property damage and
personal injury.
Function type
Lane departure warning (LDW)
On the multimedia display, click Set up→
The lane departure warning (LDW) warns
Assisted Driving → Lane keeping assist in
the driver when the vehicle deviates from
turn. In the interface, select to enable/
108
Starting and driving
disable the departure warning, departure When the lane keeping assist system does
assistance and centering control functions. not detect the lane lines, the lane lines 2 are
When lane keeping assist is enabled, the not displayed.
1
lane keeping assist (LKA) status indicator When LKA system is not activated, the lane
on the instrument cluster display will be on lines 2 are displayed in gray.
in green. When LKA system is on standby, the lane
lines 2 are displayed in white.
Lane departure warning (LDW), lane
When the lane departure warning system 2
departure prevention (LDP) and lane
works, the lane lines 2 are displayed in red.
keeping system (LKS ) will memorize the
When LKA system is intervened with
driver's selection.
steering wheel torque, the lane lines 2 are
Lane keeping assist system displayed in blue.
display 3
Release warning
The curvature of lane line may be
detected inaccurate due to limited
sensor performance, e. g., straight road is
displayed as curved road.
The lane keeping assist system will display 4
the information of system working status on
the instrument cluster.
109
Starting and driving
When both hands are detected, the • The lane keeping assist system cannot
reminder displayed on the instrument recognize road signs (cones), so it is not
cluster will disappear and the system will applicable to construction pavement.
continue to work. • The lane keeping assist system is
inapplicable to ultra-wide/ultra-narrow
Abnormal tire pressure, incorrect four-
roads.
wheel alignment parameters,
inconsistent tires and incorrect tire model, • The lane keeping assist system is
etc., may result in abnormal performance of inapplicable to zigzag pavements.
LKA system. The driver shall use the assist • The lane keeping assist system is
system when the vehicle is in normal inapplicable to bad weather with reduced
condition. visibility.
• The view of the front camera shall not be
System limitation blocked by pollutants. Especially, when
Under the following road conditions, the it's completely covered by snow, the lane
LKA performance will degrade or fail to keeping assist system will exit, and the
work. The driver should keep alert: information of system exiting will be
• The lane keeping assist system is displayed to the driver through
inapplicable to roads with excessively instrument cluster display.
small curve radius. • The installation of the front camera may
• The lane keeping assist system is be affected by vibration or collision,
inapplicable to roads with invisible lane which may degrade the system
lines. performance. In that case, the front
• The lane keeping assist system is camera needs to be recalibrated.
inapplicable to intersections of roads. Automatic emergency braking
• The lane keeping assist system is system (AEB) *
inapplicable to roads with vehicle marks By monitoring the distance and relative
(e.g., tire marks). speed of the front target, the automatic
• The lane keeping assist system is emergency braking system will take warning
inapplicable to roads of which the lanes and braking measures to assist the driver to
increase or decrease. avoid or mitigate collisions when the driver
brakes too late, the braking force is too
• The lane keeping assist system is
small or there is no braking measure.
inapplicable to roads that the original
lane and the new lane have large
difference.
• The lane keeping assist system is
inapplicable to pavements with potholes,
bumps, undulations.
110
Starting and driving
111
Starting and driving
112
Starting and driving
temporarily turned off, and the system may On the multimedia display screen, click Set
not issue a warning (if equipped with a front up → Auxiliary Driving → AEB in turn, and
camera). the alarm sensitivity can be set in this
1
interface. The alarm sensitivity will
This function will not be enabled at
memorize the driver's selection, and it is
low vehicle speed, so the system will
unnecessary to select each time when
not intervene and brake when the vehicle
getting on the vehicle.
approaches the preceding vehicle or
The alarm sensitivity is divided into three 2
pedestrian at low speed, for example, when
levels: early, moderate and late.
parking. For example, when parking.
Early sensitivity: it indicates that the alarm
Enabling function distance is far and the alarm time is
relatively early.
Moderate sensitivity: it indicates that the 3
alarm distance is moderate, and the alarm
time is between low and high.
Late sensitivity: it indicates that the alarm
distance is close and the alarm time is
relatively late. 4
If the driver thinks the alarm is too frequent,
a lower sensitivity can be selected to reduce
the total alarms.
Functions
On the multimedia display screen, click Set 5
When a danger is judged by the system, the
up → Auxiliary Driving → AEB in turn, and
system will assist the driver in the following
the automatic emergency braking and front
ways:
collision warning functions can be enabled
• Safe distance alarm
or disabled in this interface.
The safe distance alarm works in a non-
6
emergency situation. When the vehicle
speed reaches 65 km/h or above, it
reminds the driver that the following
distance is too small, and the driver
should adjust the driving behavior and
keep a proper distance.
7
• Front collision warning
When the vehicle speed reaches 30 km/h
or above, the system thinks there is a
potential collision risk, and will remind the
driver of the potential collision risk
8
113
Starting and driving
114
Starting and driving
115
Starting and driving
that the warning and braking will be delayed self-check, and the system function is not
or unachieved. available at this stage.
If a pedestrian is partially blocked, the
clothes worn are not easy to be judged as
body shape, and if the height is less than
0.8 m, or a large object is carried, he/she
can't be detected, which means that braking
cannot be achieved.
Cyclist*
The cyclist must be an adult, and the bicycle
must be designed for adults. Only when the
system detects the unmistakable outline
information of human body and bicycle, can
it achieve the best working effect. It means
On the multimedia display screen, click Set
that the system can clearly recognize
up → Assisted Driving →Rear side radar
bicycle, head, arms, shoulders, thighs,
sensor in turn, and select the opening or
upper body, lower body, etc., in combination
closing of each function in this interface as
with standard human movement.
required. All function switches remain in the
Partial block, poor background contrast or
last setting state.
cyclists loaded with large goods cannot be
The system will prompt the driver of driving
detected by the system, which means that
safety via the on/flashing of blind spot
braking cannot be realized.
monitoring indicator on the exterior rearview
Shutdown and fault mirror, instrument cluster prompt, sound
alarm, flashing of hazard warning lamp, etc.
When AEB is off, the AEB OFF indicator on
The system works normally when the blind
the instrument cluster will be on. When AEB
spot monitoring status indicator on the
fails, the AEB fault warning lamp on the
instrument cluster display turns green when
instrument cluster will be on.
the vehicle starts. When the blind spot
Rear side radar assist system*
monitoring status indicator is red, the
The system detects the rear side of the
system fails.
vehicle based on the rear medium-range
radar on both sides of rear bumper, to
realize lane change assist (LCA) (including
blind spot monitoring function), collision
• Please keep the both sides of rear
mitigation support rear (CMSR), door
bumper surface clean;
opening warning (DOW) and rear cross
• This system is only for driver assist, and
traffic alert (RCTA).
it cannot replace the driver's safe driving.
When the vehicle is powered on, the
rear side radar assist system will start
116
Starting and driving
117
Starting and driving
118
Starting and driving
119
Starting and driving
120
Starting and driving
IHBC is an auxiliary function for light When depressing the brake pedal, if
control. It is recommended to use this there is a sharp metal friction sound at
3
function when driving on high-speed roads, the brake of the vehicle, go to Geely Service
but the system cannot completely replace as soon as possible for maintenance.
the driver. The driver should always switch
Do not depress the brake pedal during
the high and low beam lights according to
driving. It may cause wear and 4
the road laws and regulations and according
overheating of the braking parts and prolong
to the changes in the road environment.
the braking distance.
In the following example cases, the
system does not work or only works to Recuperating
a limited extent, which may require a The braking system of the vehicle also has
the function of energy recuperating: when 5
personal response from the driver:
the vehicle is in the drive gear (D), when
• In rainstorm, snowstorm, dense fog and sliding or braking, the kinetic energy is
other climatic conditions that are converted into the electric energy, which is
extremely unfavorable to driving. charged into the power battery to recover
• Traffic participants (such as pedestrians, energy and improve the driving range of the 6
cyclists) with poor illumination, railway or vehicle.
waterway traffic near the road, and the
road infested with wild animals.
• In an environment with strong reflective
scenery (such as traffic signs on 7
highways).
• When the windshield is fogged, dirty or
covered by labels, ornaments, etc.
121
Starting and driving
Parking brake
Electric parking brake (EPB)
122
Starting and driving
123
Starting and driving
Electronic braking-force
distribution (EBD)
When the vehicle brakes, the electronic
brake-force distribution system (EBD) will
automatically adjust the brake force
distribution ratio of the front and rear axles
to improve the braking efficiency, and
cooperate with ABS to improve the braking
124
Starting and driving
125
Starting and driving
126
Starting and driving
127
Starting and driving
that there are obstacles in front of (if front Situation in which wrong alarm may be
parking radar is equipped) or behind the given
vehicle. The beeps will become more • There is ice on the sensor surface of the
frequent when the vehicle is closer to the parking radar system.
obstacle. When the distance is less than 30 • The vehicle is on a steep slope.
cm, a continuous beep will be heard. • The vehicle is fitted with high-frequency
Due to environmental factors, the radio equipment or antenna or they are
detection performance of radar used nearby.
sensors of parking assist system may be • The horn sound of other vehicles is too
degraded in hot, extremely cold or humid close to the parking radar system sensor.
weather. • Driving in snow or rain.
• The license plate is not installed close to
When system cannot work
the surface of the license plate bottom
normally
bracket.
Please be aware that the radar sensor of If the vehicle approaches an obstacle, the
parking assist system may not alarm or may system still does not give alarm. Please
give wrong alarms under the following contact Geely Service for maintenance as
conditions: soon as possible when you confirm it is not
When barriers cannot be detected caused by the above problems.
• The radar sensor of parking assist
When there are multiple obstacles,
system cannot detect net-shaped
the sensor of parking radar system
barriers like iron wires, mooring ropes
can only detect the nearest obstacle. Please
and blocking net.
note whether the parking sensor of another
• The radar sensor of parking assist
side detects other barrier when vehicle
system cannot detect low barriers like
moves.
stone, wood blocks, etc.
• The radar sensor of parking assist Do not directly spray or impact the
system cannot detect vehicles with a sensor surface of the parking radar
high chassis. system with high-pressure water, such as a
• The parking radar system sensor cannot water gun, or else it may cause failure.
detect soft objects like snow, cotton,
Reversing visual system
sponge which can absorb the ultrasonic
The reversing visual system assists the
wave.
driver to reverse by displaying the image
• The radar sensor of parking assist
behind the vehicle.
system cannot detect some obstacles
with special shapes, such as pillars, The driver must carefully observe
small trees, bicycles, angle materials, whether there are obstacles around
sills and corrugated paper. the vehicle before backing up, otherwise it
may cause casualties and property losses.
128
Starting and driving
The reversing visual system cannot replace Guiding line for reversing
the driver's vision. Do not rely only on the
The guiding line for reversing is a dynamic 1
reversing visual system to reverse.
track line, which adjusts the indicated
• The distance displayed on the direction according to the angle change of
multimedia display screen is different steering wheel rotation. In reversing, the
from the actual distance. guiding line for reversing covers the road
The reversing camera cannot detect behind the vehicle and turns left and right
• 2
objects outside the visual range of the according to the rotation of the steering
camera, such as under the bumper or the wheel. The direction indicated by the
vehicle. guiding line for reversing is the same as the
• The reversing camera may not detect actual running track of the vehicle, helping
children, pedestrians, cyclists or pets. the driver plan the reversing route.
3
• Do not use the reversing visual system in • Click the track line button to control the
long-distance and fast reversing enabling/disabling of the track line
operations or in places where there are function.
transverse passing vehicles. • The track line is turned on and the key is
highlighted. The trace line is closed, and
Position of rearview camera 4
the key state is operable (not
highlighted).
129
Starting and driving
130
Starting and driving
Setting interface
The driver can tap the specific area of the
5
screen to show different pictures as
demand.
1. Exit
Exit the Panoramic Image Interface
8
131
Starting and driving
132
Starting and driving
6
Click on the multimedia display screen in 4. Press the button on the AC charger, and
sequence: homepage → energy center → insert the charger into the AC charging
energy display. The energy status can be interface of the vehicle body;
viewed in this interface.
133
Starting and driving
5. Follow the instructions of the charging 4. Press the button on the DC charger, and
pile to complete the charging. insert the charger into the DC charging
6. After full charge or when it is necessary interface of the vehicle body;
to end charging, the charging shall be
ended according to the instructions of
the charging pile;
7. Unlock the electronic lock of the
charging socket, press the button on the
charger and pull out the charger as
soon as possible;
8. Close the protective cover of the AC
charging interface and the charging port
cover, and put the charger back to the
original position of the charging pile.
134
Starting and driving
135
Starting and driving
136
Emergency
3
The warning triangle is placed in the storage
box under the boot and can be seen by
Under special circumstances when the
pulling open the boot.
vehicle needs to be decelerated or stopped
in an emergency, press the hazard warning
lamp switch. Then the indicator on the 4
switch flashes along with the left and right
turn signal indicators to warn others.
Reflective vest
137
Emergency
The first aid kit is stored in the trunk and can Place the fire extinguisher in the trunk.
be seen by opening the trunk.
In case of an emergency, please
The first aid kit contains medical gauze,
ensure your own safety first, organize
elastic bandage, breathable tape, band aid,
fire fighting, and contact the fire department.
safety scissors, tire pressure gauge and
other items.
Insert the tire pressure gauge into the tire
valve, and the tire pressure value is
displayed at the rear of the tire pressure
gauge.
138
Emergency
Driver's door
1. Take out the mechanical key from the
key;
3
1. Take out the mechanical key from the
smart key;
2. Insert the mechanical key into the white
knob at the fish mouth of the door lock
for rotation;
4
3. Take out the mechanical key and close
the door to lock it completely.
139
Emergency
3. Buckle the cover of trunk emergency and contact Geely Service for maintenance.
opening device;
140
Emergency
Replace the key battery 2. Replace the battery with a new one.
Note that the anode of the battery is
Replace the key battery 1
facing the rear cover (logo side). Smart
Replacement of smart key key battery model: 3V, CR2032;
battery 3. Install the smart key chip on the back
Battery in the smart key should be replaced cover (logo side);
when the remote control distance of smart 4. Clip the two halves of the smart key
key is very short, unable to remotely control housing into place.
2
the vehicle, or vehicle cannot recognize the
smart key due to low battery power.
141
Emergency
142
Emergency
143
Emergency
144
Emergency
Replacement of spare tire After removing the floor mat, take out the
vehicle tool box, turn the lock knob
Replacement of spare tire 1
counterclockwise, take out the audio device
Park the vehicle on a level surface attached to the spare tire wheel well, and
that does not interfere with traffic and then take down the spare tire.
is convenient for safe wheel replacement. Type II
Before replacing wheels in an emergency,
turn on the vehicle's hazard warning lamps 2
and place the warning triangles on the road
at a suitable distance according to road
conditions to avoid traffic accidents.
1. Lock knob
The spare tire is stored under the floor mats
8
in the trunk.
145
Emergency
2. Take out the plastic pliers from the 4. Place the jack head. Adjust the jack to a
vehicle tool box, clamp the wheel nut suitable height as shown in the figure,
trim cap with the plastic pliers as shown and then place the jack under the lifting
in the figure, and pull the trim cap point;
outward;
The vehicle will be damaged and even
may roll over if the supporting position
of the jack is incorrect when the vehicle is
lifted. To avoid personal injury and vehicle
damages, before lifting the vehicle, be sure
to place the jack head at the correct
position.
146
Emergency
147
Emergency
148
Emergency
Descrip
Fuse No. Name Ampere value
tion
149
Emergency
Descrip
Fuse No. Name Ampere value
tion
150
Emergency
Descrip
Fuse No. Name Ampere value
tion
1
Ripple anti-pinch 2 fuse(for ripple, anti-
30A Type II
pinch model)
151
Emergency
De
Ampere
Fuse No. Name scrip
value
tion
152
Emergency
De
Ampere
Fuse No. Name scrip
value 1
tion
Central control screen & driver monitoring module
CF09 10A –
fuse*
CF11 Marine fuse 25A –
CF12 Electronic door handle fuse* 20A – 2
CF13 Sunshade fuse* 20A –
153
Emergency
De
Ampere
Fuse No. Name scrip
value
tion
Aroma system & air quality control system &PM2.5
CF30 10A –
&radar&electronic parking brake fuse*
154
Emergency
Replacement of bulb
Replacement of bulb 1
Bulb specifications
Part name Bulb name Bulb model Power
Trunk lamp Trunk lamp W5W 5W
2
The bulb model of other parts is LED.
When there is a temperature difference between the inside and outside of the lamp
shade of the front combination lamp, such as in rainy days or when washing the car,
there may be temporary fogging in the lamp shade. This is natural. The fog will dissipate after
the lights are turned on for a short time. If it does not dissipate, contact Geely Service for 3
inspection and repair.
155
Emergency
156
Emergency
157
Emergency
158
Repair and maintenance
159
Repair and maintenance
tools, rags, etc. left in the engine room, and The pressure cap of the coolant expansion
ensure that all filler caps have been tank must not be opened until the cooling
covered. system (including the pressure cap of the
1. Close the front engine hood downward coolant expansion tank and the upper
and hear a click, indicating that the front radiator hose) is completely cooled.
engine hood is locked;
2. After closing the front engine hood,
verify that it is fully locked by trying to lift
the front edge of it.
If it is not completely locked, it is necessary
to re open the front engine hood, and then
close the front engine hood. It is not allowed
to close the front engine hood by direct
force.
160
Repair and maintenance
161
Repair and maintenance
tighten the pressure cap of the coolant brake fluid from overflowing. In case of
expansion tank until the coolant is filled. accidental spillage, it shall be removed
immediately, otherwise the parts in the
If the ethylene glycol type coolant
engine room will be damaged.
certified by Geely is filled, the damage
or fault caused by using inferior coolant or
unqualified coolant mixture is not covered
by Geely's warranty.
• Brake fluid is harmful to human body. In
Brake fluid case of accidental contact, wash
immediately with plenty of water. If the
brake fluid is taken by mistake, consult a
doctor immediately.
• Brake fluid leakage causes the brake
fluid level to drop. Go to Geely Service
for maintenance as soon as possible.
• Use the brake fluid of the manufacturer
and brand designated by Geely,
otherwise it will seriously damage the
parts of the brake hydraulic system and
affect the braking performance and
distance.
Washer fluid
Topping up washer fluid
162
Repair and maintenance
163
Repair and maintenance
164
Repair and maintenance
165
Repair and maintenance
Cautions
Power battery belongs to high-voltage
energy storage equipment and dangerous
goods. Non professionals and improper
operation and use may cause electric
shock, combustion, explosion and other
serious consequences.
It is strictly forbidden for non professionals
to install and maintain power batteries and
use them beyond the scope. They must be
operated by professional technicians of
Geely Service. The power battery damage
and other losses caused by failure to use as
required or use beyond the specified range
will not be warranted.
1. Moisture proof and waterproof
There are many high-voltage control
lines and single batteries in the power
battery, so it is necessary to ensure that
166
Repair and maintenance
167
Repair and maintenance
168
Repair and maintenance
vehicle. The vehicle's tire pressure necessary to re-balance tires and wheels if
monitoring system can warn of abnormal tire the vehicle jolts when running on smooth
pressure, but it cannot replace normal tire road surface. Please contact Geely
1
maintenance. Automobile Service for maintenance as
soon as possible.
When the vehicle is driving in winter, if
all four tires are replaced with snow Flat tire
tires (the sensors are not installed on the
The following conditions will occur when the 2
tires), the instrument cluster will prompt that
tire blows while the vehicle is driving.
the sensors are missing and give a system
Corresponding measures shall be taken
failure alarm.
according to different conditions:
Tire transposition 1. If a front tire bursts, the dragging of the
The tires shall be transposed after each
flat tire will cause the vehicle to deflect 3
towards the side of the burst tire. Please
travel of 10,000 km.
release accelerator and hold the
steering wheel tightly. Make a turn to
keep the vehicle on the original lane,
then depress the brake pedal gently to 4
park the vehicle on a safe road as
possible as you can.
2. Please release the accelerator if a rear
tire bursts. Turn steering wheel to your
expected running direction to maintain 5
the vehicle under control. Vehicle may
jolt and there will be noise, but the
steering still can be controlled. And then
Carry out correct transposition according to
depress the brake pedal gently to park
the sequence shown in the figure. Adjust
the vehicle on a safe road as possible
inflation pressure of front/rear tires as 6
as you can.
shown in tire pressure label on the vehicle
If you find that the tire is leaking slowly,
after tire transposition.
please follow the steps below:
The wheels need to be installed 1. Drive the vehicle slowly to a safe and flat
correctly. After the tire is rotated, place to avoid further damage to the
7
please adjust the tire pressure. tires and wheels.
2. Turn on the hazard warning lamp and
Wheel alignment and wheel
balance place a warning triangle at an
appropriate position.
In case of abnormal tire wear or vehicle 3. Replace tire(s).
deviation, check the wheel alignment. It is 8
169
Repair and maintenance
170
Repair and maintenance
171
Repair and maintenance
degree of influence mainly depends on the protective film is being pasted, otherwise
the structure of the washer, the cleaning the interior trims will be damaged.
brush, the filtering state of the cleaning
When cleaning the glass surface on
water, and the type of cleaning agent and
the vehicle, do not use abrasive
wax solvent. If the paint surface of the
cleaner, otherwise the glass will be
vehicle body is darkened or scratched
scratched or the rear window defogger will
after washing, the operator should be
be damaged. Only use soft cloth and glass
notified immediately to make corrections.
cleaning agent.
• When choosing an automatic car washer
Detergent contains solvent which may
to clean the vehicle, give priority to a
coagulate on vehicle interior trims. Please
non-contact car washer. This type of the
read and comply with all safety instructions
vehicle washer does not have any part
on labels before using detergent.
(brushes, etc.) that may touch the vehicle
Please open doors and windows to keep
surface.
good ventilation when cleaning vehicle
Interior cleaning interior trims.
Regular vehicle interior cleaning helps to
Please note the following when cleaning the
improve the environment inside the vehicle.
interior trims:
Dust and dirt will accumulate on interior
• Do not get rid of dirt on trim surface with
trims, and cause damage to carpet, fabrics,
a knife blade or other sharp objects.
leather and plastic product surfaces. Stains
• Do not use a scrubbing brush. It might
should be cleaned quickly, especially on
damage trim surface of the vehicle.
light-colored interior trims, as they may
• Do not press or use cleaning cloth to
become solid rapidly under extremely high
wipe with great force. Wiping hard cannot
temperature.
improve cleaning effect but will damage
Remove dust on small buttons and knobs
the interior trims.
with a handy banister brush.
• Only use moderate neutral soap. Avoid
Only use professional cleaning agent to
using strong detergent or degreasing
clean the interior trim surface of the vehicle,
soap. Too much soap will leave stains
otherwise it may cause permanent damage
and is easy to absorb dirt.
to the vehicle. To avoid spraying
excessively, it is necessary to spray • Do not soak interior trims when cleaning.
cleaning agent on the cleaning cloth directly. • Do not use organic solvents such as
It is necessary to wipe the clean agent off naphtha or alcohol, as they will damage
immediately if you spray it on the surface of interior trim.
other objects in the vehicle by accident. Fabric/carpet
The temperature of the baking gun used to
Clean dust and scum with vacuum dust
paste the glass protective film is extremely
catcher fitted with soft broom head. For
high. It should be noted that the baking gun
stubborn stains, you may try to remove
should never bake the interior trims when
172
Repair and maintenance
them with fresh water or soda water first. Do not use cleaning agent or lustering agent
Before cleaning, please choose an on leather, otherwise the appearance and
appropriate method to remove stains: hand feel of the vehicle interior trims may be
1
• For liquid stains: Wipe residual stains permanently changed. Do not use silicon-
gently with tissue, so that the stains can based, wax-based or organic solvent-
fully saturate and be absorbed on the containing products to clean the vehicle
tissue. interior trims, which may cause uneven
• For solid stains: Remove as much as gloss of leather and affect the appearance 2
possible by hand and then remove with of the interior trims. Be sure not to use shoe
dust catcher. polish on leather.
Cleaning steps: Instrument panel and other
1. Soak water or soda water with clean lint- plastic surfaces
free white cleaning cloth. 3
Do not use cleaning agent or lustering agent
2. Wring the cleaning cloth to remove
on plastic surface, otherwise it may change
residual moisture.
appearance and hand feel of interior trim
3. When removing stains, scrub gently
permanently. Some commercially available
from edges to middle until no more stain
products may enhance the glossiness of 4
marks are left on the cloth.
instrument panel and thus produce
4. If stains cannot be wiped off thoroughly,
annoying reflective light on windshield,
repeat the above cleaning operations
which may affect permeability of windshield
with moderate soap water.
severely.
If stubborn stains still cannot be removed
thoroughly, consider to use synthetic fabric 5
cleaning agent or detergent. Do test for
color fastness on an inconspicuous position
in the vehicle before using these products. If
cleaning effect of the local position is good,
they can be used to clean entire surface. 6
After cleaning, the tissue may be used to
absorb residual water on fabrics or carpet.
Leather cleaning
Soft cleaning cloth dipped in water may be 7
used to remove dust. To clean more
thoroughly, use soft cleaning cloth dipped in
neutral soap water. Please let the leather
dry in air, do not dry it by baking, and do not
clean leather with steam.
8
173
Repair and maintenance
174
Technical information
3
VIN code is engraved on the beam under
the front occupant seat. Move the seat back
to the end and lift the protective cover. Then
it can be seen. 4
VIN is on the body bracket at the lower left This label contains information such as the
corner of the windshield, which can be seen vehicle identification code and is located
through the windshield. under the right center pillar.
175
Technical information
176
Technical information
Technical parameters
Main dimensions and parameters 1
Item Unit Parameter
Vehicle length mm 4432
Maximum vehicle
km/h 160 160
speed 6
Max. gradeability % 40 40
177
Technical information
Rated power kW 50 50
Tire parameters
Item Parameter
Tire size 225/50 R17 225/45 R18
Spare tire specification T125/80 R17
Dynamic unbalance ≤8 g
178
Technical information
179
Technical information
Recommended fluids
Recommended Liquids and Volume
Item Specification Volume
R134a 550g
A/C refrigerant
R1234yf 525g
180
Index
A E
A/C settings ................................. 42 Electric power steering (EPS)......... 127
Adaptive cruise control system Electronic brake-force distribution
(ACC)* ........................................ 91 (EBD) ....................................... 124
Air monitoring system*.................... 42 Electronic stability control (ESC)
Air vent adjustment ........................ 41 system ...................................... 125
Airbag ......................................... 69 Emergency response to road
Anti-lock braking system (ABS) ...... 124 accidents*.................................. 157
Appearance overview....................... 9 Emergency unlocking charger ........ 140
Automatic emergency braking Emergency unlocking door ............ 139
system (AEB) * ........................... 110 Emergency unlocking trunk door..... 139
Automatic locking and unlocking ....... 16 Exterior cleaning ......................... 171
Automatic speed limit control Exterior rearview mirror .................. 51
system (LIM) ................................ 89
F
B
Fire extinguisher ......................... 138
Brake fluid ................................. 162 First aid kit ................................. 138
Front A/C control system................. 37
Front engine compartment fuse
C box........................................... 149
Front seats................................... 21
Central control locking and Front storage................................ 59
unlocking ..................................... 16
Charging operation ...................... 132
Charging precautions ................... 132 G
Child safety lock ............................ 18
Coolant ..................................... 160 Gear information ........................... 85
Cruise control system (CC).............. 87 Getting vehicle out of trap.............. 157
Graphics ....................................... 8
D
H
Deployment of airbag ..................... 72
Door handle unlocking .................... 17 Hazard warning lamp ................... 137
Drive motor anti-theft...................... 14 Heads up display (HUD) ................. 35
Drive motor or motor controller Hill descent control (HDC) ............. 126
overheating ................................ 156 Hill hold control (HHC) .................. 126
Drive motor parameters ................ 178 Horn ........................................... 49
Driver seat memory function* ........... 25 Hydraulic brake assist (HBA) ......... 125
Driving instructions ........................ 81
Driving mode ................................ 86
Driving motor code ...................... 176
I Outdoor lamp ............................... 48
Overview of front engine
Inspection or replacement of fuse ... 148 compartment ................................ 11
Installation of child restraint system ... 77 Overview of high-voltage system ...... 12
Instrument cluster overview ............. 27
Intelligent cruise control system
(ICC) * ...................................... 100
Intelligent driving system P
introduction .................................. 87 Panoramic image system* ............. 130
Intelligent high beam control Panoramic sunroof ........................ 57
system (IHBC)* ........................... 119 Park assist system....................... 127
Interior cleaning .......................... 172 Parking brake ............................. 122
Interior fuse box .......................... 152 Positions of airbags ....................... 69
Interior lighting .............................. 47 Power battery ............................. 166
Interior overview............................ 10 Power battery parameters ............. 178
Interior rearview mirror ................... 54 Power efficiency of the vehicle ....... 177
Power supply mode ....................... 19
Power window .............................. 55
J Preface ......................................... 1
Prompt message ............................. 8
Jumper starting ........................... 142
R
K
Rear seats ................................... 23
Keyless locking and unlocking.......... 14 Rear side radar assist system ........ 116
Rear storage ................................ 61
Recommended Liquids and
L Volume ..................................... 180
Lane keeping assist (LKA)*............ 107 Recuperating.............................. 121
Light combination switch ................. 43 Reflective vest ............................ 137
Luggage rack* .............................. 64 Regular maintenance ................... 159
Remote locking and unlocking.......... 16
Replace the key battery ................ 141
Replacement of bulb .................... 155
M Replacement of spare tire ............. 145
Main dimensions and parameters ... 177 Replacement of wiper blade........... 163
Maintenance of low-voltage Reversing visual system ............... 128
battery ...................................... 165
Mass parameters of the vehicle ...... 177
S
Seat belt overview ......................... 65
N Seat heating/ventilation* ................. 24
Notes to users ................................ 5 Selection of child safety device ......... 74
Service brake ............................. 121
Shift ........................................... 85
O Smart key .................................... 13
Starting procedures ....................... 84
Open and close the front engine Steering wheel adjustment .............. 49
hood ......................................... 159 Steering wheel button..................... 49
Sun visor and makeup mirror ........... 58
T
Three-point seat belt ...................... 66
Tire maintenance ........................ 167
Tire parameters .......................... 178
Towing eye ................................ 143
Towing tips ................................ 143
Traction control system (TCS) ........ 126
Trunk door open............................ 17
Trunk storage ............................... 62
U
Use of child restraint system ............ 76
V
Vehicle certification label............... 175
Vehicle fire................................. 156
Vehicle identification number ......... 175
W
Warning triangle.......................... 137
Warnings and indicators ................. 31
Washer fluid ............................... 162
Wheel alignment parameters ......... 179
Wiper control combination switch ...... 45
Wired charging ............................. 63
Wireless charging*......................... 63