Professional Documents
Culture Documents
Engineering
Department of Computer Science and Engineering ,
DWARAKANAGAR, BAGALUR MAIN ROAD, YELAHANKA, BANGALORE-63
Date: 2/1/2024
Circular
Dear Students,
Cover page and Certificates need to be taken color printout (bond paper)
Please follow the specification mentioned while preparing your Project report
Brindavan College of Engineering
Department of Computer Science and Engineering ,
DWARAKANAGAR, BAGALUR MAIN ROAD,YELAHANKA, BANGALORE-63
Prof. MAMATHA M
Assistant Professor
VISVESVARAYA TECHNOLOGICAL UNIVERSITY
“JNANA SANGAMA”, BELAGAVI – 590018, KARNATAKA
This is to certify that the phase 1 project report entitled “TITLE” is a bonafied
work carried out by 1 USN, 2 USN, 3 USN, 4 USN in the fulfillment for the
requirements of Seventh Semester, Bachelor of Engineering in Computer
Science and Engineering of Visvesvaraya Technological University,
Belagavi during the year 2023-24. It is certified that all corrections and
suggestions indicated for the internal assessment have been incorporated in the
report. This project report has been approved as it satisfies the academic
requirements in respect to the work prescribed for the Bachelor of Engineering
degree.
v
ACKNOWLEDGEMENT
The satisfaction and euphoria that accompanies the successful completion of any task would
be incomplete without mentioning the people who made it possible. With deep gratitude, we
acknowledge all those guidance and encouragement, which served as bacon of light and
crowned our efforts with success. We thank each one of them for their valuable support.
we express our sincere thanks to Dr. B.R. Shetty, Chairman, Brindavan College of
Engineering, Bangalore, for providing necessary facilities and motivation to carry out Project
work successfully.
we convey our sincere thanks to Dr. Shruti Sharma, CEO, Brindavan Group of Institutions
for her support and motivation.
we wish to express our sincere thanks to Dr.Venugopal A R, Director, Brindavan Group of
Institutions for his support and motivation.
We express our sincere thanks to Dr. Bhagappa, Principal, and Brindavan College of
Engineering for providing necessary facilities and motivation to carry out project work
successfully.
We express our heartfelt gratitude and humble thanks to Prof. Avinash N, Head of Dept, CSE,
Brindavan College of Engineering, for the constant encouragement and help to carry out
project work successfully.
We take this opportunity to express our sincere gratitude to Project Coordinator Prof.
Mamatha M, Assistant Professor, Dept. of CSE, Brindavan College of Engineering for
encouraging us throughout the Project work.
We would also like to express our humble thanks to Project guide Prof.GUIDE NAME,
Assistant Professor, Dept. of CSE, Brindavan College of Engineering for guiding and
having facilitated us to complete our project work successfully.
We would like to mention our special thanks to all the faculty members of Computer Science
and Engineering Department, Brindavan College of Engineering for their invaluable support
and guidance. We finally thank our family and friends who have been encouraging us
constantly and inspiring. NAME USN
NAME USN
NAME USN
NAME USN
vi
TABLE OF CONTENTS
1 Introduction 1
2 Literature Survey 3
3 System Analysis 9
3.1 Existing system 9
3.2 Proposed System 9
3.2.1 Scope 9
3.2.2 Objectives 10
4 System Requirement Specifications 11
4.1 Software Requirements 11
4.1.1 C++ Language 11
4.1.2 Arduino IDE 11
4.1.3 Visual Studio Code 11
4.1.4 Android Studio 12
4.2 Hardware Requirements 12
4.2.1 Infrared Sensor 12
4.2.2 Ultrasonic Sensor 12
4.2.3 Global Positioning System (GPS) Module 13
4.2.4 Global System for Mobile communication 13
(GSM) Module
4.2.5 Electromagnetic Relay 13
4.2.6 DC Motors 13
4.2.7 Arduino UNO 13
4.2.8 Bluetooth Module 13
4.2.9 Recordable Camera 14
iii
4.2.10 Water Pump 14
5 System Design 15
5.1 System Architecture 15
5.2 Data Flow Diagram 17
5.3 Sequence Diagram 19
5.4 Use Case Diagram 20
5.5 Class Diagram 21
References 23
iv
LIST OF FIGURES
v
1) Project reports should be typed neatly only on one side of the paper with 1.5 line spacing
on a A4 size paper (210 x 297 mm).
2) The margins should be:
Left - 1.25 inches, Right – 1 inch, Top and Bottom - 0.7 inch.
5) Numbering of Chapters
The Chapters may be divided into Sections and Sub Sections. An example of numbering
of the chapters, sections and subsections is as follows :
* CHAPTER 2
* Sections 2.1, 2.2,2.3…(Sections within chapter 2)
* Subsections 2.1.1, 2.1.2, 2.1.3….(Subsections within Section 2.1)
6) The Chapter Number must be Left justified (font size 16).
7) The Chapter Title should be Centered, with all letters Capitalized (font size 18)
8) The Sections must be Left Justified (font size 16)
9) The Subsections must be Left Justified (font size 14)
10) The body of the text must have a font size 12.
11) ALL CONTENTS MUST BE JUSTIFIED.
12) Figure and Table Numbering& Labeling
* The figures and tables must be numbered chapter wise.
* For e.g., if the figure is the third figure in the first chapter, then the figure number is
Figure 1.3. Figure Name * If the table is the second table in the third chapter, then
the table number is Table 3.2.Table Name
* Thefont size for labels of figures and tables is 10.