B-LOC® Shrink Discs
DESIGN FEATURES
External locking deviees for keyes sional shat connections on shafs fiom 5/8" to 40" diameter, BLOC? Shrink Diss,
Provide a high capaciy interference fit with all the postive
features of conventional interference fits, but without their assembly and disasembly problems
Offer exremely concentric and well-balanced connections,
ideal for high-speed applications.
Permic simple axial posicioning and angular toning,
‘Are available in standard, igh, and heavy-duy series ro
‘sit any application,
WORKING PRINCIPLE
BLOC Shrink Dises provide shigh-ratio conversion of sexow camp
loads ino radial contac pressures when the espered collars are pulled
together by tightening ofthe inregrsted high-srength locking screws
“These radial contact pressures i turn accomplish the following:
1. Contact the inner ting and ub
‘a close the clearance between shaft and hub bore
2. Generates defined shafivhub comtace pressure for
a high capacity mechniealincerference i
‘This fictional bond transmits corque, bending and/or theust loads
lrety from the hub othe shat the shrink dis itself does noe carry
any torque or thrust load,
TORQUE
My = ated torque capacity of one B-LOC Shrink Disc with all crews tightened to specified torque M, as ltd in specications, based on a
coeficent of fiction 4 = 0.15 and specified tolerances and clearances. Torque capacities for Half Shrink Discs = M.-
2
+ Torque capacities for connections using shaft diameters beowsen the minimum and maximum
snes listed can be approximated through interpolation.
+ Transmissible torque decreases if tolerances and/or clearances ae larger than specified: or iF
halle shafts with bores exceeding approximately 3596 of shaft diameter are used.
THRUST
Th» transmisible thrust, determined by using the fllowing equation:
Th=2eM,
d
where: d = shaft dismeser
My rated torque capacity
TORQUE AND THRUST COMBINED
‘Simukancous wansmistion of torque and thrust requires calculating
a resultant rorgue:
Mow =f PERE
where: T= peak drive torque
F = peak thrust load
dd shaft diameter
Select a unie whese My > Mi,
«0 vw lemerdovescom + US and Cad 1800243 3374 + Lan Ama 1717 665 2421 + Euope, Ad, Auta and Aca 644 0870 757 7007ENGINEERING DATA
BENDING MOMENTS.
Shrink dies will generally ansmit «continuous bending moment equal: 25% of rated torque capacity My.
RELEASABILITY
Since the tapers of B-LOC Shrink Disc ate sltelasng and sess from radial contractions ofthe hub
are well wich citi iis, loosening the locking screws results in hub expansion back ci oiginal
e for smooth tansiion
vow smerinescon + US and Cad 1800243 3274 + Ltn Ae 1717665 2427 + Euope, Aa Aba and Aca #44 0870757 7007 “1B-LOC® Shrink Discs |
B-LOC:
‘$10 ~ Standard Duty
NESSRSSEREEREEEKEYLESS LOCKING DEVICE
B-LOC
Shrink Disc
SD20
so1o soz0 5030
Standard Duy Ligh Duty ery Duty
Table |
For Series SD10,D20 and SD30
vow smerinescon + US and Cad 1800243 3274 + Ltn Ae 1717665 2427 + Euope, Aa Aba and Aca #44 0870757 7007 2KEYLESS LOCKING DEVICE
A + vw ofl ks oe pl ana st
(ram rte she sp 0 s0 someon ns ert
a
fs in rt Ds es 00010 ge ro of et hb fcr ht or «7.
1 Sete eeomef pee) eran