Professional Documents
Culture Documents
AIDA-America Corporation is a subsidiary of AIDA Engineering LTD., Sagamihara, Japan | Specifications are subject to change without notice | © Copyright 2021 AIDA-America AAC-03182021
NC2 MODELS (TWO-POINT, GAP FRAME PRESS)
NC2-1100 NC2-1600 NC2-2000 NC2-2500
Press Technical Data Unit
(1) E (2) E (1) E (2) E (1) E (2) E (1) E (2) E
kN 1100 1600 2000 2500
Tonnage Capacity
U.S. ton 121 176 220 275
mm 5.0 6.0 7.0 7.0
Tonnage Rating Point
in. 0.2 0.2 0.3 0.3
mm 110 180 130 200 150 250 170 280
Full Stroke Length
in. 4.3 7.1 5.1 7.9 5.9 9.8 6.7 11.0
SPM (No Load) spm 55~110 35~70 50~95 30~60 40~80 30~50 30~60 20~40
mm 350 400 400 450 450 500 450 550
Die Height (SDAU)
in. 13.78 15.75 15.75 17.72 17.72 19.68 17.72 21.65
mm 90 100 110 120
Slide Adjustment
in. 3.5 3.9 4.3 4.7
mm 1360 x 520 1500 x 580 1850 x 650 2100 x 700
Slide Area (LR x FB)
in. 53.5 x 20.5 59.1 x 22.8 72.8 x 25.6 82.7 x 27.6
mm 1880 x 520 1880 x 680 2040 x 600 2040 x 760 2420 x 680 2420 x 840 2700 x 760 2700 x 920
Bolster Area (LR x FB)
in. 74.0 x 20.5 74.0 x 26.8 80.3 x 23.6 80.3 x 29.9 95.3 x 26.8 95.3 x 33.1 106.3 x 29.9 106.3 x 36.2
mm 270 350 310 390 350 430 390 470
Throat Depth
in. 10.6 13.8 12.2 15.4 13.8 16.9 15.4 18.5
mm 1470 1590 1920 2190
Inside Frame Dimension
in. 57.9 62.6 75.6 86.2
mm 155 165 170 180
Bolster Thickness
in. 6.1 6.5 6.7 7.1
kg 550 800 1200 1650
Maximum Upper Die Weight
lb. 1213 1764 2646 3638
kW 11 15 22 30
Main Motor Capacity
HP 15 20 30 40
MPa 0.5 0.5 0.5 0.5
Required Air Pressure
psi 73 73 73 73
Highly rigid fabricated steel frame with low angular deflection Hydraulic overload protection (HOLP)
Cast iron slide Stuck-on-bottom release device
Cast bolster plate Variable speed main motor with reversing capability
Forged steel crankshaft PLC control with operator touch screen for functionality
Hardened & ground pinion & ground main gear Main control panel on outside frame (right side)
6-Point full length bronze gibs Operation push button pedestal, T-stand
Automatic lubrication system for gibs & crankshaft bearings Air counterbalance cylinder
Clutch-brake control through AIDA proprietary microprocessor Motor-driven die height adjustment
Wet type clutch & brake Metric die height indicator
Automatic flywheel brake with actuation valve Programmable limit switch, four (4) PLS outputs for customer use
Brake stop-time monitoring display Die protection receptacle, two (2)
AIDA-America Corporation
7660 Center Point 70 Blvd., Dayton, OH U.S.A. 45424
Office: (937) 237-2382 Service: (937) 235-3599
info@aida-america.com www.aida-global.com
AIDA-America Corporation is a subsidiary of AIDA Engineering LTD., Sagamihara, Japan | Specifications are subject to change without notice | © Copyright 2021 AIDA-America AAC-03182021