Professional Documents
Culture Documents
Read Me Before Installation
Read Me Before Installation
3 Mega Pixel
Installation of the Software
[Please Print and keep handy while installing. Please follow instructions]
Important:
Please do not attach the Camera USB provided with the Microscope to the
USB ports of the Computer, before installing the Software
STEP. A
3) If your systems asks for Restart, please restart the system otherwise move
to the next step.
STEP. B
7) Please uncheck and click finish. The software will finish the rest of the
installation.
Click Finish
Uncheck the same
8) If your systems asks for Restart, please restart the system otherwise move
to the next step.
STEP. C
Only after all above steps outlined above are successfully carried out should the camera
USB cable be plugged into your computer.
STEP. D
Computer will automatically detected the camera and ask for installation for drivers as
follows:
Attach the USB 2.0 cable to the USB port of the computer.
Select
Click Next
Select
Click Next
Click Browse button to the “Plug Play” folder in the CD and click next. The camera
drivers will then be installed
Click “Continue
Anyway”
Click Finish
You are now ready to capture and analyse the images from the Microscope.
Use of Softwares
1. “dgsoft ProVIEW” is for capturing images
2. “dgsoft ProMED” is for performing various Image Analysis features on the
images captured by ProView.
.
BASIC INSTRUCTIONS FOR OPERATING THE
SOFTWARE
dgsoft ProVIEW
STEP A:
1. Open the dgsoft ProMED Software, Click on the Capture button which will open
our dgsoft ProVIEW software module for Image capturing.
4. In the same Window you can set the Brightness, Contrast etc. setting on the
live displayed image, as per your choice to conform with the visual quality
desired or as per physical visual seen through the microscope eyepieces.
1. Click Apply
2. Click OK.
STEP B:
2. In the same window set the ‘Output Size’ as desired by choosing from the window,
Check “1280 * 1024” for optimal image capture. The image may be resized after
capture through the dgsoft ProMED software, subsequently.
1. Click Apply
1. Click Apply
2. Click OK
Select ‘YUY2’ from drop down menu box under ‘Color Space/Compression’
STEP C:
From the FILE menu click options or click option Icon on menu bar. You need to
manually change the ‘Captured Image Location 1’ to the following in order to store the
images captured, in the default folder of dgsoft ProMED software for analysis.
1. Click OK
All images captured now, will appear in the pictures bar on the screen in the ProMED
window.
STEP D:
1. When the dgsoft ProView software is opened it automatically detects the camera
and starts displaying the live image.
2. You can start and stop the camera by clicking ‘Start/Stop’ Icon, as below.
2. You can capture the image anywhere by the clicking menu button ‘Save
Anywhere’ as below
dgsoft ProMED
The manual for the same is supplied in the Software CD in PDF format.
You may color correct images, measure , cell count, report and various other
functions can be performed on the stored images, with the help of dgsoft
ProMED software.
TECH Support