Professional Documents
Culture Documents
1 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
About the Cover...
For over 30 years, Woodpeckers
has led the market in router table
innovation, and this year is no
exception. We've re-designed our
top-of-the-line fence to include
micro-adjustment on both infeed
and outfeed sides. We've added a
crank-style micro-adjustment to our
router lift and now offer the same
design in lightweight aluminum
or rugged Blanchard-ground steel.
Our stands now use hardware that
makes assembly go faster. And
our phenolic router tables have the
slots milled directly into them now
for better stability and smoother
adjustment. Our Premium Router
Table Packages merge all these new
designs into full-featured bundles
that save you money and ensure
you get what you need. If
you're ready for a next level
router table, you've come
to the right place.
Router Table Packages with
QuickLift Router Lift | Pages 90-91
QuickLift HDS &
QuickLift Router Lifts | Page 84
2
2 Woodpeckers ®, LLC • 1-800-752-0725 • woodpeck.com
FullThrottle Blast Gates................................71
CATEGORIES DRILL PRESS & DRILLING
Drill Press Tables..........................................37 Knobs.............................................................78
DP∙PRO Drill Press Table System...................38 Track Nuts.....................................................78
MEASURING & MARKING NEW DP∙PRO TCS Drill Press Table..............39 Tracks............................................................79
Precision Woodworking Squares............... 4-6 Universal Cross Dowel Jig...........................40 Mini-Scraper.................................................80
NEW DelVe Squares........................................7 Connector Bolts & Cross Dowels................40 Cordless Drill Station...................................81
Saddle T-Squares.............................................8 NEW AutoAngle Drill Guide...........................41 Cubby Drawers.............................................81
Pocket T-Squares.............................................9 NEW DUAX Angle Drilling Table...................42 Shop Dustpan & Bench Brush.....................97
in-DEXABLE Squares............................10-11 Auto-Line Drill Guide..................................43 Signature Mug...............................................97
Woodworking Rules & Stops................. 12-13 Shelf Pin & Drawer Slide Template.............44 Notepads........................................................97
Precision Woodworking Protractor..............13 Mechanical Pencil.........................................97
Precision Woodworking T-Squares..............14 TABLE SAW ACCESSORIES
NEW Hex Scale Rules...................................15 NEW StealthStop Miter Sled............................45 WOODTURNING
Woodworkers Edge Rules............................16 Saw Gauges............................................. 46-47 Woodturning Tools.................................. 72-74
Precision Triangle.........................................17 NEW Align-A-Saw System.............................48 Center Finders...............................................74
Carpenters Square.........................................17 NEW AutoScale Miter Sled.............................49 Parting Tool-Ci..............................................75
NEW SkillSquares..........................................18 Exact-90 Miter Gauge.....................................50 Pen Mill-Ci....................................................76
Story Stick PRO............................................19 NEW StealthStop Miter Gauge........................51 Pen Mandrel System.....................................77
Paolini Pocket Rules.....................................20 Rip-Flip Fence Stop System............................52
Hook Rules....................................................21 Precision Taper Jig..........................................53 ROUTER ACCESSORIES
SERX Straight Edge Rules...........................22 NEW Spline Jig...............................................54 Slab Flattening Mill∙Pro...............................82
NEW Adjustable Setup Block.......................23 NEW ThinRip Guide.......................................55 NEW Rout-N-Plane Bench Top Board Mill.....83
NEW Setup Blocks.........................................24 NEW QuickLift Precision Router Lifts............ 84
Mini Square...................................................25 POWER TOOL ACCESSORIES SpinRite Router Motors..................................85
NEW EngleAngle...........................................26 NEW StealthStop Miter Saw Fence Stop System....56 Router Table Stands......................................86
Offset Base System.........................................57 Wheel Kits.....................................................86
CLAMPING Parallel Guide System.....................................58 Downdraft Dust Cabinet...............................86
Clamping Square Plus & CSP Clamps........27 Adjustable Track Square.................................59 Router Table Tops.........................................87
Steel Clamping Squares................................28 Hole Boring Jig.............................................60 NEW SF-PRO Router Table Fence...............88
NEW VaryAngle Clamping Fixture..............29 MFT Layout & Assembly Square................61 Cast Aluminum Router Plates......................89
Clamp Rack-It...............................................29 NEW Clamp-N-Guide....................................62 Twist Lock Ring Set.....................................89
Clamp Rack-It System..................................30 Variable Router Jig........................................63 NEW Router Table Packages................... 90-91
NEW Joint Bridge Clamping Pads................31 Exact Width Dado Jig...................................64 Iron-Grip Coping Sled..................................92
Miter Clamping Tool....................................31 NEW MortiseMatch.........................................65 Coping Sled...................................................93
Universal Clamp Bridges.............................31 Morty Loose Tenon Joinery Jig....................66 NEW Iron-Grip Small Parts Holder..............94
Box Clamps...................................................32 Multi-Function Router Base.........................67 PushGuard.....................................................95
NEW ClampZILLA 4-Way Panel Clamps....33 NEW SteadyCurve Band Saw Template Guide..... 68 Freehand Guard.............................................95
NEW Track Clamp Bench.............................34 Variable Pressure Featherboards..................95
CornerLock Clamp.......................................34 HAND TOOLS & SHOP AIDS Multi-Router............................................ 98-99
2096 Workholding Kit..................................35 EZ Edge Corner Plane..................................69 Rack Bit Router Bit Rack...........................100
NEW Xpander Clamp System.......................36 NEW SandStand Tilting Sander Base...........70
Woodpeckers, LLC reserves the right to limit quantities. INTERNATIONAL & CANADIAN ORDERS MAILING LIST PRIVACY If you do not wish to be included in our
The customer must pay customs upon delivery of the merchandise. Canadian database, please let a Customer Service Representative know and we
SHIPPING Express shipping services are available at an additional customers pay in U.S. funds at current exchange rates. Please call a Customer will honor your request. Visit www.woodpeck.com/privacy-policy for a
charge, pending availability of stock. Please speak to a Customer Service Representative toll free at 800-752-0725 Monday - Friday 9:00 am to complete policy disclosure.
Service Representative toll free at 800-752-0725 Monday - Friday 9:00 4:00pm (EDT) for more information.
am to 4:00pm (EDT) for further details, or visit woodpeck.com.
© 2024 Woodpeckers, LLC
CALIFORNIA RESIDENTS WARNING! Many of our products require a California Prop 65 warning, either because they are used to produce sawdust or because their manufacture involves chemicals known to the state of California to
cause cancer, birth defects or other reproductive harm. Because we list several items per page, we have posted ample warning throughout the publication with clear and reasonable access to Prop 65 Warnings. For more information on
your rights under California Proposition 65 visit www.p65warnings.ca.gov or call 916-445-6900.
CALIFORNIA
3 3 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
The Most Trustworthy Tool in Your Shop
Success in the workshop depends on the care you put into across your stock. Our new stainless steel squares improve and
machinery set up, the accuracy of your layout work and simplify your layout work with their 1/16" thick blade, laser-
consistently checking your work during assembly. All three engraved graduations and precision-milled scribing notches.
jobs call for an accurate, well-made square, and here are several Materials Woodpeckers uses “cast and ground tool plate”
to choose from. Woodpeckers Precision Woodworking Squares aluminum in our squares cores. It’s the most dimensionally
feature unique designs, are built with optimal materials and stable aluminum made. The new stainless steel square cores
undergo rigorous quality control. You’ll soon find yourself are milled from premium-grade stainless, heat treated for
more confident that your joinery is going to come out dead on. strength and processed to produce a non-glare satin finish. The
Design Features The cores of our squares are one precisely measurements on the squares aren’t screen printed or stamped,
machined piece. Compare that to traditional designs with a they’re laser engraved, one at a time, to a tolerance of ±.004".
rectangular blade riveted to a separate beam made of a different Quality Control Representative samples of every run of squares
material. The cheeks added to this central core are narrower are examined on our computer-controlled optical inspection
by a quarter of an inch, forming a shoulder also not found in system. Additionally, every single square is checked by
traditional square designs. The shoulder allows the square to hand against certified granite reference blocks during final
rest on the edge of a board without you holding on. We use this assembly. We guarantee our squares to ±0.0085° for the life of
same fundamental design in squares from 6" to 26" and with the tool. If you ever find your square outside those tolerances,
two different core materials. Our familiar anodized aluminum we’ll fix it or replace it.
squares excel at checking assemblies and striking lines square
4
4 Woodpeckers ®, LLC • 1-800-752-0725 • woodpeck.com
Precision Woodworking Squares
The new stainless steel squares include laser cut scribing The solid footing provided by the 3/4” beam allows the
notches for accurate parallel scribing. square to stand on its own for hands-free alignment checks.
We've packed many of the great features of our aluminum squares into our new
stainless-steel models...& then gave them some unique features, too. Notice the lip
formed by the central core being slightly wider than the beam cheeks. Your square
won't roll over. That's a feature you'll see in Woodpeckers squares from 6" to 26".
One-piece central
core is machined
to exacting
tolerances.
Patent Pending
The notch in the one-piece blade allows you to mark all the way to the
edge of your work.
Mark perfect thirds on standard 3/4" material. Mark perfect parallel lines with scribing guides on
eighth-inch centers.
Each DelVe has commonly used set-up blocks great for setting up depth of Not just a square... make angled marks with the graduations along the
cut at any machine. hypotenuse.
DELVE® SQUARE
DELVESQAL3 3-1/2" DelVe Square & Rack-It™��������������������������������� $59.99
Each DelVe Square DELVESQAL6 6" DelVe Square & Rack-It™���������������������������������������� $99.99
comes with a wall- DELVESQALSET DelVe Square Set & Rack-Its™�������������������������������$139.99
mountable Rack-It.
DELVE® SQUARE SS
DELVSS3-20 3" Stainless Steel DelVe Square & Rack-It™���������������$109.99
DELVSS6-20 6" Stainless Steel DelVe Square & Rack-It™���������������$139.99
DELVSSSET-20 Stainless Steel DelVe Square Set & Rack-Its™������ $229.99
Patent Pending
CALIFORNIA
7 7 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
Saddle T-Squares
Saddle Up for Accurate Joinery Lay Out Work
Whether you have 40 years of woodworking experience or 40
hours, those tiny lines on rules and tapes can be hard to work with.
Woodpeckers Saddle T-Squares improve your lay out accuracy with
three unique features – a series of holes to guide your pencil, an edge
that wraps around your work, and a high-contrast laser-engraved
scale. These three great features are packed into tools that easily drop
in your shop apron or carpenter jeans pocket, so you’re always ready
for precision layout work.
Precision Parallel Scribing. The first thing people notice when they
see our Saddle T-Squares is the array of holes perforating the center
of the blade. The holes are milled precisely 1/32" apart and are sized
just right for the tip of a mechanical pencil. Marking a line parallel
to the edge of your stock is as simple as finding the hole you want,
dropping in a pencil and sliding the Saddle-T along the edge.
Wrap Around Marking. Instead of struggling to re-align a square to
transfer a mark from the face to the edge, with the Saddle T-Square
you can do it in one fluid motion. The 3/4" deep reference
edge is machined perfectly in line with the scale edge.
Beveled Edges and High Contrast. When you do need
the scale, you’ll never find one easier to read than
the scale on the Saddle T-Square. We beveled the
edges 30° to put the graduations right down on
top of your work, and the bright white laser-
engraved scale is easy to read against the red
anodized surface. Prefer metric? We make the
same tool with the pencil-tip guide holes on a
1mm grid and metric scales on the edges.
Choose Your Size or Get the Whole Set. We make
the Saddle T-Squares in 4", 6", 8" and 12" lengths
and metric equivalents. Both inch and metric sets
include the wall-mountable Saddle-T Rack-It.
Patent Pending
Sets include the Saddle-T Rack-It to keep your
Saddle-T's in plain sight and ready to go to work.
Saddle T-Squares
The Same...
Our Saddle T-Squares and Pocket
Mark around the corner of your stock in one Parallel scribing is guided by precisely milled T-Squares are similar tools with subtle
smooth motion. pencil guides on a 1/32" grid. differences. The Saddle-T has a deeper
(3/4") “T” edge that is perfectly in line with
the graduated edges. With those surfaces
SADDLE T-SQUARES in line with each other, you can mark the
face and edge in one quick motion.
SDLT0419 4" - T4 Saddle-T����������������������������������������������������������������������� $64.99
SDLT10019 100mm - T100 Saddle-T������������������������������������������������������� $64.99
SDLT0619 6" - T6 Saddle-T ����������������������������������������������������������������������$79.99 The Pocket-T has a thinner reference
SDLT15019 150mm - T150 Saddle-T���������������������������������������������������������$79.99 edge, which works nicely with thinner
SDLT819 8" - T8 Saddle-T ������������������������������������������������������������������������$99.99 stock. The body is sleeker than the
SDLT20019 200mm - T200 Saddle-T ������������������������������������������������������$99.99 Saddle-T, too, which makes the Pocket-T
SDLT1219 12" - T12 Saddle-T ���������������������������������������������������������������� $119.99 a nice choice for an always-ready-to-go
SDLT30019 300mm - T300 Saddle-T ����������������������������������������������������� $119.99 tool you have with you all the time.
SDLTSET-IRI19 Saddle T-Square Set & Rack-It™ - Inch����������������������� $339.99
SDLTSET-MRI19 Saddle T-Square Set & Rack-It™ - Metric������������������ $339.99
SLDTRI Saddle-T Rack-It™����������������������������������������������������������������������$19.99
Patent Pending
Sets include the Pocket-T Rack-It to keep
your Pocket-T's ready to go to work.
Pocket T-Squares
...Only Different
The reference edge on both tools is 2-7/8"
long. Both have laser-engraved scales Scribing guides on 32nd-inch centers deliver The reference edge is just 1/4" thick, making
graduated in 32nds and scribing guides flawless parallel layout lines. the Pocket T-Squares ideal for layout work on
on 32nd centers. The edges of both are thin stock.
beveled at 30° to get the scale right down
next to your stock. And, both are available
in metric versions.
Patent Pending E
Parallel scribing guides simplify layout work. Head indexes at every full inch to accurately calibrate the scribing guides to the head.
10 Woodpeckers ®, LLC • 1-800-752-0725 • woodpeck.com
The XL Combination Square and Double Square are
equipped with 18" and 12" blades, respectively, both
C
with heads that are a full inch thick. With just under
1/2" beneath the blade, you’ll never worry about
rounded-over edges changing your readings, and the
squares have a firm footing when standing vertical
for cabinet checks or machinery adjustment, too.
B Machined from aircraft grade aluminum, the heads
weigh less than the cast iron heads found on other
brands of adjustable squares, even though ours are
both thicker and longer along both reference edges.
The bright “Woodpeckers Red” anodized finish
makes the squares easy to find in your shop and they’ll
never rust, regardless of your working environment.
A
In addition to the XL Combination Square, the
standard Combination Square comes with a
12" blade and the standard Double Square
comes with a 6" blade. Our ever popular Mini
Combination and Double Squares, packed with the
all of the same great features, are available at 6"
and 4" respectively. Individual squares come with
a wall-mountable Rack-It™ to keep your square
D protected and in plain sight. The complete set of four
squares comes with a wall-mountable MDF case with
a custom-fit recess machined for each square.
MINI in-DEXABLE ™
A MDSQ-21 Mini in-DEXABLE Double Square / 4" Blade & Rack-It™���������������������������������������������������������������������������������������������������������������������� $109.99
B MCSQ-21 Mini in-DEXABLE Combination Square / 6" Blade & Rack-It™������������������������������������������������������������������������������������������������������������� $109.99
MCDSQ-SET-21 Mini in-DEXABLE Combination & Double Squares Set / 4", 6", 8" Blades & Rack-Its™����������������������������������������������������������������� $239.99
C I-P8B-MI Mini in-DEXABLE Protractor / 8" Blade &Rack-It™�������������������������������������������������������������������������������������������������������������������������������� $132.99
D I-CF4B-MI Mini in-DEXABLE Center Finder / 4" Blade & Rack-It™������������������������������������������������������������������������������������������������������������������������� $89.99
I-SDK-MI Mini in-DEXABLE Square Deluxe Kit / Protractor, Center Finder, Combination, Double Square Heads, 8, 6 & 4" Blades & Rack-Its™�����$399.99
in-DEXABLE ™ STANDARD
DSQ-ST-20 in-DEXABLE Standard Double Square / 6" Blade & Rack-It™��������������������������������������������������������������������������������������������������������������� $129.99
DSQ-STM-20 in-DEXABLE Standard Double Square / 150mm Blade & Rack-It™��������������������������������������������������������������������������������������������������� $129.99
CSQ-ST-20 in-DEXABLE Standard Combination Square / 12" Blade & Rack-It™���������������������������������������������������������������������������������������������������� $169.99
CSQ-STM-20 in-DEXABLE Standard Combination Square / 300mm Blade & Rack-It™����������������������������������������������������������������������������������������� $169.99
E I-P18B-I in-DEXABLE Protractor / 18" Blade &Rack-It™���������������������������������������������������������������������������������������������������������������������������������������$239.99
I-P18B-M in-DEXABLE Protractor / 450mm Blade &Rack-It™���������������������������������������������������������������������������������������������������������������������������������$239.99
F I-CF6B-I in-DEXABLE Center Finder / 6" Blade & Rack-It™���������������������������������������������������������������������������������������������������������������������������������� $139.99
I-CF6B-M in-DEXABLE Center Finder / 150mm Blade & Rack-It™�������������������������������������������������������������������������������������������������������������������������� $139.99
I-SDK-I in-DEXABLE Square Deluxe Kit / Protractor, Center Finder, Combination, Double Square Heads, 18, 12 & 6" Blades & Rack-Its™�������$599.99
I-SDK-M in-DEXABLE Square Deluxe Kit / Protractor, Center Finder, Combination, Double Square Heads, 450, 300 & 150mm Blades & Rack-Its™����$599.99
in-DEXABLE ™ XL
G DSQ-XL-20 in-DEXABLE XL Double Square / 12" Blade & Rack-It™���������������������������� $169.99
DSQ-XLM-20 in-DEXABLE XL Double Square / 300mm Blade & Rack-It™�������������������� $169.99
H CSQ-XL-20 in-DEXABLE XL Combination Square / 18" Blade & Rack-It™������������������� $199.99
CSQ-XLM-20 in-DEXABLE XL Combination Square / 450mm Blade & Rack-It™����������� $199.99
in-DEXABLEs
come with wall-
Not just for mountable
layout, these Rack-Its.
squares excel at
checking work in
progress.
CALIFORNIA
11 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
Woodworking Rules Patent Pending
Left-To-Right, Right-To-Left
WOODWORKING RULES
CENTERING / LEFT-TO-RIGHT OUR MOST POPULAR!
WWR6 6" Woodworking Rule����������������������������������������������������������$16.99
WWR12 12" Woodworking Rule����������������������������������������������������� $29.99
Right to Left Scale is ideal for setting your table saw rip fence. WWR300 300mm Woodworking Rule������������������������������������������� $29.99
WWR24 24" Woodworking Rule����������������������������������������������������� $39.99
WWR600 600mm Woodworking Rule������������������������������������������� $39.99
WWR36 36" Woodworking Rule����������������������������������������������������� $59.99
WWR900 900mm Woodworking Rule������������������������������������������� $59.99
WWR49 49-1/2" Woodworking Rule���������������������������������������������� $89.99
WWR1200 1257mm Woodworking Rule������������������������������������������ $89.99
CENTERING RULE BUNDLES
WWRCOMBOI 6", 12", 24", 36", 49.5" Rules + Hook Stop ����������� $269.99
WWRCOMBOM 300, 600, 900, 1200mm Rules + Hook Stop������ $239.99
Beveled edges on the Woodworking Rules improve handling and eliminate INCH/ METRIC
parallax error when transferring measurements to your stock. WWR491200 49-1/2" Woodworking Rule��������������������������������������� $89.99
Precision
Woodworking
Protractor
Precision
Woodworking Scribe lines at any angle.
Protractor comes Woodworking Rules sold
with wall-mountable separately.
Rack-It.
CALIFORNIA
13 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
Precision
Woodworking
T-Squares
Lip of beam overlaps your stock edge for
unparalleled stability while you mark.
Patent Pending
Precisely machined holes spaced every 1/16" Laser-engraved scales graduated in 32nds are The 30° beveled edges puts the scale markings
work with almost all mechanical pencils. 1/4" aligned perfectly to the edge of the T-square beam. right next to your work, reducing parallax error.
holes on 1" centers are perfect for shelf pins.
Wouldn’t it be great to have one rule you could grab knowing you
could reference from either end, measure in either inches or millimeters
and locate the center of anything instantly? Well, now you can. With
Woodpeckers HexScale Rule…six different graduations in one
handy rule. Those of us old enough to remember when woodworking
plans were drawn on a drafting table instead of a computer will also
remember a triangular rule that was graduated with several different
ratio scales and a normal inch scale. Woodpeckers has borrowed that
shape to give you the six most useful graduations for woodworking HexScale has a left-to-right reading Right-to-left reading scales in
all in one tool. Measure from right to left and left to right in inches scale in both inch and metric. both inch and metric simplify
or millimeters and locate the center of anything in either system. Not table saw set up.
only does HexScale put all the rules you need in one, the distinctive
shape gets the laser-engraved scales right down on your material,
virtually eliminating parallax viewing error.
Left-to-Right - In day-to-day lay out work, this is the most familiar to
woodworkers. With zero at the left edge of the rule the scale increases
toward the right.
Right-to-Left - Occasionally, a measurement needs to start from the
right side, instead of the left. A familiar example of this is your table
saw, where most often you need to measure from the rip fence on the
right to the edge of the blade.
Centering - Whether for hardware mounting or joinery, woodworkers
often need the center of a board. A centering scale takes all the math Centering scales make it simple to HexScale can reference off
out of the equation. Just adjust the rule so the same measurement locate the middle of material. the corner of your material to
lines up on both edges and the zero will be at the exact center of the ensure it is parallel.
material. You can then either mark center or lay out points the same
distance either side of center. 36"
Inch & Metric - All three options mentioned above are on the HexScale
in both inch and metric graduations. The scales are organized to help 24"
those of us trying to become fluent in metric. If you’re looking at a
scale in inches, roll the HexScale one time and the equivalent metric 12"
scale will replace it.
Stops - We designed a stop to fit the profile of the HexScale for 6"
repetitive marking. Just slide it on, adjust it to the dimension you
want and mark as many items as you need.
Four Lengths - Woodpeckers makes the HexScale in 6", 12", 24" HEXSCALE RULES
and 36" lengths. Each is available individually, or get the complete HXSCL-SET HexScale Rule Set / 4 Rules, 4 Stops & Rack-It™����� $159.99
set. The set includes all four HexScales, four stops and a wall- HXSCL-36 HexScale Rule - 36" / 900mm + Stop�������������������������� $59.99
mountable Rack-It to keep your HexScales right in plain sight and HXSCL-24 HexScale Rule - 24" / 600mm + Stop�������������������������� $39.99
ready to go to work. HXSCL-12 HexScale Rule - 12" / 300mm + Stop�������������������������� $29.99
HXSCL-6 HexScale Rule - 6" / 150mm + Stop�������������������������������$19.99
CALIFORNIA
15 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
A
Woodworkers Edge Rule
Wraps Around the Corner of Your Stock for Perfect
Alignment and Dual-Edge Marking
Woodpeckers new Woodworkers Edge Rule sides and the center of the board is between the
simplifies your life by wrapping around the edge two lines…it doesn't matter whether your stock
of your stock and giving you an accurate scale on is slightly under or slightly over, the center will
both sides. The short side is just 3/8" wide, giving always be between the lines. Rule indexed perfectly from inside corner
you plenty of room to mark stock as thin as 7/16". & parallel to stock being measured.
D. Mid-Field Measurements Even when you're not
The long side reaches 3/4" across the face of your working at the edge of your stock, you'll still find
piece. Whether you're working on the edge or the the Edge Rule handy. The profiled shape makes it
face, the corner of the Edge Rule always keeps
you properly aligned.
easier to move around on your stock than a thin,
flat rule and the beveled edges get the scale right
B
next to your stock where you need it.
Here are just some of applications for this nifty rule:
The angle inside the Edge Rule is 89° meaning
A. Measurements from Inside Corners Hardware the the Edge Rule rests on the outside edges,
installation usually calls for a measurement accommodating slight deviations in your
referenced from an intersecting cross-member… workpiece. Both edges are beveled, which
like the rails and stiles of a cabinet face frame. The simplifies marking and minimizes parallax error.
Edge Rule makes this job simple, keeping your The scale is laser engraved with 1/32" graduations
scale square to your stock and starting flush at the to a tolerance of ±.004".
edge. Just by flipping the tool over, you can come Mark both face & edge at the same time.
in from either right or left just as easily. E. Repetitive marking is easier and more No more attempts to transfer the mark
accurate when you add an Edge Rule Stop. from one to the other.
B. Marking Edge & Face By placing the desired If you need a place to keep your Edge Rules
dimension at the end of your board as shown in the organized, the Edge Rule Rack-It keeps them
photo, you can mark both the face and edge at the handy and safe (requires an Edge Rule Stop for
same time. As mentioned above, this works just as
easily and accurately from right to left as it does
each stored Edge Rule).
Woodworkers Edge Rules are available in 6", 12",
C
from left to right.
24" and 36" lengths. Your choice in the longer
C. Finding Center of 3/4” Nominal Stock We all Edge Rules depends on the scale of your work.
know 3/4" plywood isn't 3/4" anymore, and even If you make jewelry boxes and smaller scale
if you're careful with your planer, solid stock can projects, the 12" is perfect. Furniture and cabinet
be a hair under or a hair over. Using the short side projects call for either the 24" or 36".
of the Edge Rule, you can scribe a line from both
6" Carpenters
Square
Square & 45° / Fast & Accurate
Our 6" Carpenters Square is a perfectly machined
combination 90° and 45° miter square with cheeks
added to the base leg and a laser-engraved inch
scale on the vertical leg. It's a handy square
to have with you in the shop all the time, but
particularly handy when working with framing
lumber. It's a fast and accurate tool to have in your
belt when you're framing.
Quality begins with the blade being machined from
cast and ground aluminum tool plate. The solid
aluminum cheeks are milled from solid bar stock
and fastened to the body with high-strength socket
screws. The bolted-on cheeks ensure the tool can be
re-calibrated to the blade if knocked out of position.
Patent Pending
CALIFORNIA
17 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
SkillSquares
L
O
O
T
Offset Tabs step down to be even with the bottom of the track allowing work in the center
of a panel.
Use Caliper Arms to “take off” precise inside or outside measurements …then instantly
transfer to your saw fence.
CALIFORNIA
19 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
Paolini Pocket Rules
Patent Pending
Instantly reference from the edge of Set the height for router bits.
your stock.
HOOK RULES
HR06-20 6" Hook Rule with Rack-It™��������������������������������������������������������������� $24.99
HR150-20 150mm Hook Rule with Rack-It™���������������������������������������������������� $24.99
HR12-20 12" Hook Rule with Rack-It™������������������������������������������������������������� $44.99
HR300-20 300mm Hook Rule with Rack-It™���������������������������������������������������� $44.99
HR24-20 24" Hook Rule with Rack-It™������������������������������������������������������������� $64.99
Keep your rules HR600-20 600mm Hook Rule with Rack-It™���������������������������������������������������� $64.99
handy with the HRSETIN-20 6", 12", 24" Hook Rule Set with Rack-Its™����������������������������������$129.99
included Rack-It. HRSETMM-20 150mm, 300mm, 600mm Hook Rule Set with Rack-Its™��������$129.99
HRRACK-IT6-20 6" Hook Rule Rack-It™��������������������������������������������������������������$6.99
HRRACK-IT-20 12"/24" Hook Rule Rack-It™��������������������������������������������������������$7.99
CALIFORNIA
21 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
SERX Straight Edge Rules
The Difference Between a Straight Edge and a Rule?
Rules are designed to measure distance and guide a pencil near, but not on the edge. It enhances any light shining between
or blade. Straight Edges are designed to check the flatness of the straight edge and the surface being checked.
surfaces. While a lot of folks use a rule as a straight edge, once
But hold on…while a rule isn’t a straight edge, a straight edge can
you’ve used Woodpeckers SERX straight edge, the light bulb will
be a rule. To give you more utility from your SERX, we beveled
go on and you’ll get it. First, the SERX is held to a tolerance of
the other edge and laser engraved it with a fractional scale. The
±.0015" per foot. Next, one edge of the SERX is machined with a
bevel gets the scale right down next to your work, where it's
precise vee-groove that allows the SERX to stand on its own, yet
needed. The bright white laser-engraved markings have strong
have a very thin contact point, which improves visual inspection.
visual contrast against the red anodized surface. Available in 24"
To further improve visibility, we laser engrave a solid white bar
and 36" lengths.
Patent Pending
22
22 Woodpeckers ®, LLC • 1-800-752-0725 • woodpeck.com
Adjustable Setup Block
T
O
One Setup Block is All You Need.
O
L
Quick adjustment and locked-in precision. It’s just three steps to An attractive tool with quality you can feel! The triangular base
your precise dimension with the Adjustable Setup Block. Depress and reference plate are meticulously machined from a solid billet
the quick-adjust button and slide the reference surface up or down of aluminum, then anodized with our famous “Woodpeckers Red”
until it’s close. Use the micro-adjust to dial in your exact dimension, finish. Stainless-steel inlays with an old-school jeweled finish provide
then tighten the locking knob. It’s that easy. a handsome contrast. The adjusting and locking hardware parts are all
turned on our Swiss lathes from high grade stainless steel. The scales
Precision doesn’t stop at sixteenths, 1/64" doesn't look like much, are laser engraved to a tolerance of .004" total accumulated error. This
until it’s a gap in your joint...then it looks like the Grand Canyon. handy physical reference tool will simplify all your machinery set-up
But working to 64ths using a standard scale can challenge even the and fit comfortably in the pocket of your shop apron. We’ve included a
most "eagle-eyed" among us. The ramped design of the Adjustable wall-mountable Rack-It, to keep your tool well protected, but always in
Setup Block spaces out the graduations over 2-1/2 times. It's not plain sight.
magic, it’s geometry, but it will feel like magic in your shop when The Adjustable Setup Block is also available in a metric version. The top
you can start dialing in machine set-ups in less time and to a much and bottom scales give you a range from .5mm up to 28mm. The scales
higher level of precision. are graduated in .5mm increments and held to the same strict tolerance
Two scales provide multiple applications, the “TOP” scale measures as the inch scales.
the distance from the bottom of the base to the top of the reference
plate. You can use that to set the distance between the bottom of
a drill bit and table of your drill press. The “BOTTOM” scale
measures the distance from the bottom of the base to the bottom ADJUSTABLE SETUP BLOCK
face of the reference plate. It’s perfect for adjusting the height of ADJSU-I-23 Adjustable Setup Block & Rack-It™������������������ $219.99
a bit in your router table or the depth of cut on your table saw. The ADJSU-M-23 Adjustable Setup Block, Metric & Rack-It™���� $219.99
reference plate extends away from the body of the tool, giving you
lots of alignment options.
Wall-mountable Rack-It
keeps your Adjustable Setup
Block in plain sight and
ready for use.
ABOVE: Use the top reference surface to set bit depth of travel at the drill press.
BELOW: Use the bottom reference to set the bit height at the router table.
CALIFORNIA
2323 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
Setup Blocks
L
O Stop Squinting...Stop Guessing...Start Gauging!
O
T
Anyone that has tried to set a critical depth of cut on a circular saw snug them together and adjust your fence until the combination just
blade knows what can happen if you’re reading it just a little in front barely kisses the saw blade. Perfect fence setting without worrying
of (or a little behind) top dead center. The generous 4-inch length about being on the right mark on your rule or whether your tape is
of Woodpeckers Setup Blocks eliminates that problem. There’s no square to the fence.
guessing as to where top dead center is and trying to position your Carefully made for generations of use. All the blocks are machined to a
scale at just the right point. Just place the setup block along the blade tolerance of 1/1000th of an inch for dimension, flatness and squareness.
and TDC will be obvious. Check any combination you want with the most accurate measuring
This isn’t a new trick, just one more commonly used in metal working device you have. You’ll see that a stack of these blocks is just as accurate
than in woodworking. Machinists call them “gauge blocks” and they’ve as your best rule, and much easier to work with. Woodpeckers Setup
been around for centuries. Once you start using your setup blocks, Blocks are machined from aircraft grade aluminum billets on CNC
you’ll find more and more places where they work better than rules milling centers. Then they are anodized to create a durable surface that
or tapes. You’ll start stacking them on top of (or next to) each other to resists most shop chemicals and won’t leave dark marks on your stock.
hit larger dimensions. This is really handy with the largest block in the Each block is individually checked for tolerance before being packed
set, which is precisely 1" x 2" x 4”. Need your rip fence at 2-1/4" for in a fitted case and shipped to your shop.
cabinet rails and stiles? Take the big block and the quarter inch block,
Dial in router bit height precisely. Easily set The 1"x2"x4" Block works well with the fractional
depth stops blocks to set up larger dimensions.
for drill press
operations.
42-Piece Jumbo
Deluxe Set has the
complete Fractional
Set and the complete
Metric Set.
SETUP BLOCKS
SUB13-22 Setup Blocks 13-Pc Standard Set��������������������������������������������������� $149.99
SUB10-22 Setup Blocks 10-Pc Metric Set��������������������������������������������������������$139.99
SUB19-22 Setup Blocks 19-Pc Expansion Set�������������������������������������������������$219.99
SUB42W-22 Setup Blocks 42-Pc Jumbo Deluxe Set����������������������������������������$499.99
24
24 24
Woodpeckers ®, LLC • 1-800-752-0725 • woodpeck.com
Mini Square
Patent Pending
CALIFORNIA
2525 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
L
O
O
T
™
Patent Pending
Divide.....Conquer!
You simply can't rely on math alone to cut dead-on mitered trim
on a "kinda close" corner. You need a miter cut at exactly one-half
of the existing corner... period. By fixing two blades to the central
frame, Engle Angles automatically bisect any corner. With no
calculations whatsoever, you have dead-on mitered trim scribed
to any wacky corner.
In the old days, the carpenter would match his angle, mark his
material and cut to the line with a sharp hand saw. Well today we
have power tools. If you have a miter saw with a laser, mark your
material then use the laser to line up to your mark. But not all saws
have a laser, so each arm is attached with a removable knob. With
one leg unlinked and folded out of the way, you have a longer,
taller reference area next to your saw blade.
Adjust the Engle Angle to match the corner Transfer the angle to your material. If your saw doesn't have a laser, you can
your miter needs to fit. disconnect one side of the Engle Angle.
Engle Angle™
EA6-23 Engle Angle 6" & Hanger����������������������������������������� $119.99
EA3-23 Engle Angle Mini 3" & Hanger�����������������������������������$99.99
EA-SET-23 Engle Angle Set 3" & 6" w/Hangers���������������� $209.99
Designed specifically to
secure Clamping Squares CSP Clamp Rack-It holds 4 Clamping
Plus, the CSP Clamps are Squares Plus & 8 CSP Clamps. Available
compact & efficient. in a set or individually.
9" Steel Clamping Squares: Great for Panel Projects. General purpose 6" Steel Clamping Squares. 3" Steel Clamping Squares for small projects.
Patent Pending
Semble Clamps sold separately.
Clamps
not included
™
If your clamp storage needs are more localized, with one set of
clamps needed here and a different set there, the original Clamp
Rack-It is for you. The assembled rack is just over 1-1/2" wide and
12" deep, giving you plenty of room for six heavy duty parallel
jaw clamps. Anywhere you can attach to a stud, you can hang
clamps. Drill two holes, screw the lag bolts in almost
all the way, hang the Clamp Rack-It halves
on the lags, and lock them down through the
convenient access ports. Heavy gauge steel
racks provide strength. Powder coated finish
stands up to wear and tear.
43
Clamps in
Keep your shop
organized and efficient
with Clamp Rack-It.
Clamps & accessories not included Backer Plates can be joined end-to-end. Joint must land on stud or be mounted to
Just 16" of a solid wall surface.
Wall Space
16" Backer Plate with 3 Large Arm Sets & 24" Backer Plate with the same arms. Plenty of 32" Backer Plate with same arms. Double the
2 Small Arm Sets. room for expansion. space capacity of the 16" Backer.
Clamps
not included
Patent Pending
CALIFORNIA
31 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
Box
Clamps
Adjust fixed block to
stock thickness.
Patent Pending
Box Joint Butt Joint Corner Joint Dado Joint Miter Joint T-Joint
32 Woodpeckers , LLC • 1-800-752-0725 • woodpeck.com
®
T
O
O
L
Clamp
T
Bench
*Clamps sold separately.
Patent Pending
CornerLock Clamp
SPRING...Into Action!
CornerLocks spring into action whenever you need two pieces
of stock held square to each other. Use them to hold projects
in alignment while your install fasteners, apply bar clamps or
figure out the next step in your process. They couldn't be easier
to use. Just compress the spring and drop the CornerLock over
the two pieces. The spring captures your material between a
square steel corner and two alignment pins. Just slide the stock
into perfect alignment and you're done. Two different springs
are provided. The lighter spring is perfect for delicate projects.
When components are bigger and you want to make sure
things don't move, switch back to the standard springs.
CORNERLOCK CLAMPS
CL1 CornerLock Clamp���������������������� $39.99
CL4 CornerLock Clamps, 4-Pk����������$119.99
34
34 Woodpeckers ®, LLC • 1-800-752-0725 • woodpeck.com
2096 Workholding Kit
Get the Most Out of Your Gridwork Workbenches
If you agree that the simplest solution is usually the correct solution, you’ll love
Woodpeckers 2096 Workholding Kit. Few things are simpler than two opposing
wedges, and that’s one of the principles behind this kit. With one wedge fixed, the
opposing wedge can apply amazing gripping strength with the tiniest application
of pressure. When you’re done and ready for the next piece, a simple tap on the
narrow end of the floating wedge and it’s free.
Another simple approach is a bench stop or “dog” with a fixed height…no
springs, no clamps, just a shoulder that keeps it in place. The kit has a gaggle of
them, in a range of heights where you'll always find one just a little shorter than
your typical stock dimensions.
When you need to work on material that has been rabbetted, grab a couple of the
Adjustable Dogs. The threaded stem fits into any of the 1/8" dogs and adjusts up
or down to completely support a ledge from below.
"2096" refers to the spacing on Festool's MFT table...20mm holes on 96mm
centers. This kit works perfectly with an MFT or with any table you make with
There's a dog the right height for almost any stock thickness.
our Hole Boring Jig (see page 60).
Any of the dogs will lock the fixed wedges and fixed stops to your workbench to
set up a quick clamping system like no other.
Patent Pending
Kit includes (2) small floating wedges, (2) large floating wedges,
(2) fixed wedges, (2) fixed stops, (4 each of) 2", 0.7" and .375" dogs
2096 WORKHOLDING KIT
(8) .125" dogs (drilled and tapped for the adjustable dogs) and (4) WHK2096SB-19 2096 Workholding Kit (No Case)��������������� $339.99
adjustable dogs. WHK2096S-19 2096 Workholding Kit In Systainer Case����� $399.99
NOTE: The Festool brand name is the registered trademark of the respective companies and is not associated with Woodpeckers, LLC.
CALIFORNIA
3535 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
L
O
Clamp System
O
T
by Izzy Swan
Take the Stress Out of Large Panel Glue-Ups.
Gluing up table tops and large panels often turns into a wrestling
match between you and a bunch of clamps you’re trying to
keep upright and evenly spaced. Creative genius, Izzy Swan,
invented a clamp carrier that dramatically speeds up the process
and eliminates the stress. Woodpeckers has worked closely with
Izzy in creating our new Xpander Clamp Systems. The Xpander
works with most any brand of parallel jaw clamp and keeps 4 clamps
perfectly spaced, from butted up right next to each other up to 15"
apart on the smaller model and 17-1/2" apart on the larger. Adjusting
the spacing is as simple as sliding the two outside clamps in or out… mentioned before, spacing between the clamps is automatic. And, the
the linkage system automatically keeps the middle clamps straight, clamps are elevated off the work surface, simplifying the application of
upright and evenly spaced. When the job is done, just slide the clamps clamping cauls or Woodpeckers Joint Bridges.
together and store them away as a single unit. The linkage bars of the Xpander are powder-coated steel…glue pops
Both models give you the full range of your clamps. The clamping head off easily. The clamp holders are tough injection-molded polycarbonate.
can easily move from inside the bar holder to outside the bar holder, Each clamp holder ends in a nylon foot that slides easily and won’t mar
and the bar holder itself adjusts 5". This means there are no “dead the surface of your workbench. Set screws in the clamp holders quickly
spots”. You can squeeze every inch out of your clamps’ capacity. and easily secure your clamps in the Xpander. Once installed, you can
leave them in all the time, or pop them out if needed individually.
Working with your clamps held in an Xpander system makes
everything about your glue-up go smoother. The clamps are locked When the glue is dry and the panel has moved to the next step, just
vertically, so they won’t fall over if you bump them. The clamping collapse the Xpander and stand it against a wall or slide it on a shelf…the
heads adjust easily along the rail, since the bar is held in place. As entire assembly is barely larger than the clamps themselves and it stores
neatly without turning into a tangled mess like loose clamps tend to do.
The larger 4050 Xpander accommodates 40" to 50" clamps.
The smaller 2430 Xpander handles 24" to 36" clamps. The
4050 expands to 53" from edge to edge, allowing you to
glue up panels up to 60" long. The 2430 expands to 46"
edge to edge, letting you glue up panels 53" long.
36
36 Woodpeckers ®, LLC • 1-800-752-0725 • woodpeck.com
Package 3
Don't let a tight budget keep you from upgrading your drill press.
While our DP∙PRO system takes the auxiliary drill press table to a new
level of performance, thousands of woodworkers love their original
Woodpeckers Drill Press Table and you will, too.
Package 1 Package 2
It all starts with the unique Micro-Dot laminate surface bonded to both
sides of a stable MDF core. The Micro-Dot surface makes stock slide
effortlessly. Then we embed two sections of our Dual-Purpose T-Track
to create the attachment point for the fence and hold-downs.
The 36" long fence is engraved with zero in the middle to assist
in positioning. We offer two different stops that can be positioned
anywhere along the fence for repetitive work. The Stainless-Steel Flip
Stops are fast and very durable. The Molded Flip Stops deliver great
accuracy at a lower price. Includes 2 Hold Down Pivot Clamps.
Includes 2 Knuckle Clamps.
Hold downs are either our original Hold Down Pivot Clamp or the
versatile Knuckle Clamp. Either style slides into any of the slots on the
fence or fence tracks.
Your Drill Press Table also includes one tear-out-eliminating filler block.
Underneath the filler are leveling screws to adjust the block flush with
the table. When it’s too full of holes to do its job, it’s easy to replace
with any 1/2" material, or we offer them pre-cut.
It all comes together as a versatile system that puts your stock where
you want it and makes sure it stays there through the drilling operation. 2 Molded Flip Stops. 2 Molded Flip Stops.
Patent Pending
DP∙PRO TCS
Drill Press Table Patent Pending
Drill Guide
Patent Pending
CALIFORNIA
41 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
L
O
DUAX
O
T
Angle Drilling
Table
Fence supports horizontal drilling with the large Drill round stock safely and accurately with the Centering pins locate holes at the exact center of
flat surface. vee-notch. your stock.
against each side of the stock. Now your bit is perfectly centered. It works on stock up to 3-1/2"
wide.
Combine the optional extension rod kit and optional flip-stops with the fence and you can
positively position your holes from an end and an edge at the same time. The extension rod kit
lets you position the fence up to 24" from the bit, or keep the fence on the standard rods and
position a stop up to 48" from the bit. Batch processing furniture parts has never been easier!
Auto-Line puts the precision of a drill press anywhere you need it. But, even better, it goes places
a drill press simply can't.
Drill face frames for the front mounting hole for drawer slides. The Deluxe Shelf
Pin & Drawer Slide
Template includes
the template, inside
SHELF PIN & DRAWER & outside face frame spacers, frameless spacers, index pins, nylon spacer
locking screws, drill guide bushing, self-centering drill bits, router bits and
SLIDE TEMPLATE the template guide bushing.
SPT2 Shelf Pin & Drawer Slide Template������������������� $129.99
SPT2-DEL Shelf Pin & Drawer Slide Template - Deluxe���$249.99 DON’T FORGET Check out Woodpeck.com for a full line of
THE ROUTER BITS! Ultra-Shear™ Router Bits.
44 Woodpeckers , LLC • 1-800-752-0725 • woodpeck.com
®
T
O
Miter Sled O
L
Budget Friendly
but Feature Packed.
Woodpeckers StealthStop Miter Sled delivers an accurate, versatile, easily-
adjusted cross-cut sled at a very attractive price. For only a little more than
you would pay for materials to build a miter sled, the StealthStop Miter
Sled includes a miter bar that compensates for sloppy or worn miter slots,
easily adjusts to the saw blade, has extremely accurate stops for common
miter angles and features the proven micro-adjustable StealthStops we've
been making for miter saws and miter gauges for years.
Let’s take a closer look at the features. All adjustments are made from
above. You can tweak the sled into perfect alignment and lock it securely
without ever removing it. We machine the sled from 1/2" Baltic Birch
plywood that has a black micro-dot laminate on both sides. It's flat, stable StealthStops flip out sideways, not down. Miters can't lift the stop out of position.
and low-friction.
The miter bar has 4 leaf springs along the edge. The springs automatically
adjust for miter slots that have worn or were poorly sized to begin with. If
your saw has a T-shaped miter slot, a pair of oblong spacers fit the T-slot
and keep your bar in place when fully extended. Don't worry if you don't
have a T-slot…the spacers come off in seconds to fit normal 3/8" x 3/4"
slots.
When you talk about the flip stops, the name says it all. StealthStops
retract completely within the fence when they're not needed, then flip
out instantly when they are. They're always ready, but never in the way.
By flipping out sideways (instead of down from above) you never worry Fence extends to a maximum of 29"
about mitered ends lifting a stop out of position.Additional stops can be
added to your StealthStop Miter Sled anytime you need them. STEALTHSTOP™ MITER SLED
By the numbers. The table of the StealthStop Miter Sled measures 15" SSCMS-DLX StealthStop Miter Sled + Drop Zone���������� $229.99
x 15". The miter bar is 3/8 " x 3/4" x 18-1/2". With most 10" table saws SSCMS StealthStop Miter Sled���������������������������������������$199.99
you'll have 22" of cross-cut capacity. The positive stops on the miter head SSCMS-UP StealthStop Miter Sled + Drop Zone���������������$74.99
are for 3, 4, 5, 6, 8, and 12 sided objects (60°, 45°, 36°, 30°, 22-1/2° and SSCMS-DZ StealthStop Miter Sled + Drop Zone�������������� $39.99
15°). The optional Drop Zone cut-off catch table measures 8" x 15". One SSX2 StealthStop Miter Sled + Drop Zone���������������������� $39.99
sacrificial end-block is included and we offer them in 3-packs. If you have a SSMGZC-3PK StealthStop Miter Gauge Fence
StealthStop Miter Gauge and would like to convert it to a StealthStop Miter Zero Clearance Blocks (3pk)������������������������������������������������ $9.99
Sled, there's a conversion kit with all the parts and hardware you need. BD-0707.474 Woodpeckers 1/8" Ball Wrench�������������������� $6.99
CALIFORNIA
45 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
Saw Gauge
U.S. Patent 7,856,733
Tune Up Your Table Saw for Cleaner, Original Saw Gauge in custom-
More Accurate Results molded Woodpeckers case.
Adjusting the alignment between the blade and the miter slot
of your table saw is the single most important thing you can do to
improve your woodworking. The next item on that list is adjusting
your rip fence to be parallel to the miter slot. Woodpeckers Saw
Gauge makes checking those critical alignments a simple process.
What sets Woodpeckers Saw Gauge apart from the rest is our method
of registering the gauge in the miter slot.
After-market table saw accessories have always faced the
same dilemma; miter gauge slots vary widely by both design and
manufacturing tolerance. Woodpeckers founder, Rich Hummel,
solved the problem (and received a patent for it) while designing the
Saw Gauge. By dropping two small polished pins in the miter slot
and placing a larger pin between them, the middle pin stays precisely
centered regardless of the miter slot width or any deviation from end
to end. Just drop the pins in the miter slot, find the vee-slot in the
indicator holder that puts the dial indicator into contact with your
saw blade, and check at the front and back of the blade. It’s that easy.
The original Saw Gauge has a reach of 6-1/2", enabling you to Bring fence up to the Saw Gauge and check it at a few points along its
length to confirm that the fence is parallel to the miter gauge slot.
reach from the miter gauge slot to the saw blade on just about every
saw ever made. It also works on your rip fence when it’s moved in
close to the saw blade. The mount for the dial indicator is an industry SAW GAUGE
standard, so we also offer the Saw Gauge without a dial indicator. SG-WP Saw Gauge in Woodpeckers Case ������������������$99.99
SG-WP-ONLY Saw Gauge (No Dial)
in Woodpeckers Case ���������������������������������������������������$79.99
SHOP
miter slot, even of motion in both
if the slot varies directions. Rotate
from end to end. the bezel to zero
& you’re ready to
ESSENTIAL! check your saw.
Low friction pad protects your saw & makes Saw Gauge slide smoothly.
STEP 3:
WATCH THE
NEEDLE
Slide the Saw
Gauge to the rear
of the blade and
check the dial
indicator to see if
the blade and slot
are parallel. Adjust
arbor to be within
±.001".
SAW GAUGE 2.0
SG2-WP Saw Gauge 2.0����������������������������������������������������������������$239.99
SG2-WP-ND Saw Gauge 2.0 (No Dial)������������������������������������������� $219.99
CALIFORNIA
47 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 91.
3. Prices are subject to change without notice.
L
O
Align∙A∙Saw
O
T
System
Patent Pending
StealthStops in Drop Zone make it simple to produce The sliding pivot point keeps the scale calibrated to the blade The stop keeps mitered points in place.
multiple short workpieces. throughout the entire range.
Fence extension can take your stop all the way out to 45". Scale reads to
Just Square...Period. the edge of the stop on the top of the fence. Easy to see and easy to set.
No matter how cleverly engineered a table saw might be, it always If your saw has a T-track miter slot, the Woodpeckers Miter Bar has
seems like the miter gauge was an after-thought. The ones that come two T-washers giving you extra support when making wide cross-cuts.
with new saws are typically barely usable, and most after-market miter No T-track? The T-washers come off with simple counter-sunk screws.
gauges assume the miter slots in the tables are straight and uniform. Perfectly square is great, but accurately controlling the length of your
So, our engineers developed a miter gauge that reliably performs the stock is critical, too. The Exact-90's fence houses an extension that
one job woodworkers need most from it, a perfectly square cut, and slides out to take the flip stop all the way to 45 inches. Wide stock? Our
can do it every time. Introducing Woodpeckers Exact-90 Miter Gauge. patent pending Flop Stop keeps your fence from flopping off the table
That perfect 90° cut starts with the miter bar. That’s why much of when pulling back the miter gauge from the face of the table.
our engineering focused on building a miter bar that can overcome the If you’re through chasing square cuts with your current miter gauge,
limitations of a poorly-machined or time-worn miter slot. At 25-1/2" Woodpeckers Exact-90 is the perfect solution for your shop. More
long, the longest on the market, our new patent-pending design has 5 cross-cut capacity, more fence extension, a patent pending, proven,
specially-designed nylon leaf springs built into the edge of the miter adjustment-free miter bar and Dead. Square. Cuts.
bar that automatically adapt to your miter slot.
Exact-90's extendable fence & flip stop reaches to 45 inches. Eliminate flop Nylon leaf springs
when you pull the fence back with the included patent pending Flop Stop. keep pressure even in
miter slot, even if slot
varies in size.
EXACT-90 MITER GAUGE
E90 Exact-90 Miter Gauge�������������������������������� $329.99
E90-MB 25.5" Miter Bar����������������������������������������$69.99
E90-FS Exact-90 Flip Stop�����������������������������������$29.99
FLOPSTOP Exact-90 Flop Stop���������������������������� $34.99
E90-SF Exact-90 Sacrificial Fence��������������������������$9.99
E90-RI Exact-90 Rack-ItTM������������������������������������$29.99
The fence adjusts laterally to position support Sacrificial end blocks support the cut all the way StealthStops are ideal for miter cutting. Sharply
close to the blade. through. cut ends won't lift the stop.
CALIFORNIA
51 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
RIP-FLIP ™
Fence Stop
System
Patent Pending
2 Flip Stops
Repeatable Accuracy & Together LimCoupled
Perfect Fitting Dadoes Travel for P it Fence
erfect
Dadoes.
Nothing makes work in the shop go smoother than a device that delivers
repeatably accurate results. For years miter gauges, router tables and drill
presses have had flip stops. The Rip-Flip Fence Stop System takes the
precision and convenience of the flip stop somewhere it’s never been before…
your table saw rip fence. Whether you have a specific dimension that you use
day in and day out or need to save a critical dimension during a project, the
Rip-Flip will return your rip fence to the exact same position every time.
To use a Rip-Flip Stop, just flip it up, slide the fence until it contacts the brass
tip of the stop and lock your fence. It’s that easy. The large knurled brass
knob and locking thumbwheel make micro-adjusting and locking quick and
accurate. The stops are symmetrical, so they can be set up to contact the left
or right side of the fence, and it takes just seconds to flip a stop from one side
to the other.
We weren’t satisfied with just adding flip-stop convenience and precision
to the rip fence. We coupled two stops together for perfect fitting dadoes.
Simply assemble your dado stack to at least half the width of your finished
dado. Then, with a few turns of the micro-adjuster you can fine tune a perfect
fitting dado by making two cuts; one against each stop. Now that you have
the dado dialed in, the coupled stops can be repositioned anywhere along the
rail and the dado will automatically remain the same without ever readjusting
anything. Think about fitting multiple shelves in a cabinet.
We offer two versions of the Rip-Flip Fence Stop System. One is compatible
with SawStop's unique “T-Glide” fence. The second fits Powermatic brand
saws that have their “Accu-Fence”, Biesemeyer T-Square Fences and most
“clones” of the Biesemeyer. We’ve looked at dozens of different T-Square
and the Rip Flip adapts to the vast majority of them. Integrating the Rip-Flip
System with your table saw takes just a few minutes. Get reliable repeatability Micro-adjustable stop works on either side of the fence clamp.
at your table saw with Woodpeckers Rip-Flip Fence Stop System.
Patent Pending
CALIFORNIA
53 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
L
O
O
T
Patent Pending
Spline Jig
Splines Strengthen Your Joints
& Your Design.
Strengthen your miter joints with Woodpeckers Spline
Jig. A normal mitered corner lacks the long-grain to
long-grain contact needed for a strong joint. Since it
isn't completely end-grain to end-grain, it will usually
hold together for a while, but it's weak and probably
won't survive seasonal changes. You can make the
joint rock solid and add a design element at the same
time by adding splines across the miters. Woodpeckers
Spline Jig makes it simple to add splines to all kinds
of mitered joints using either your table saw or router
table. Just set the stops to position the cut where you
want to add a spline, drop your pre-glued miter project
in the jig and make the cut. Glue in the spline and just
that quickly, you've made an attractive joint that will last UHMW glide strips protects your saw from Stops on both sides support narrow
for generations. scratches while reducing friction. workpieces like picture frames.
THINRIP
Guide Patent Pending
THINRIP® GUIDE
TRG ThinRip Guide�����������������������������������������������������$149.99
CALIFORNIA
55 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
L
O
O
T
Patent Pending
NOTE: The Festool & Domino brand names are the registered trademarks of the respective companies and are not associated with Woodpeckers, LLC.
CALIFORNIA
5757 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
CALIFORNIA RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 82.
Parallel
Guide System
Patent Pending
Patent Pending
NOTE: The Festool, Triton & Makita brand names are the registered trademarks of the respective companies and are not associated with Woodpeckers, LLC.
CALIFORNIA
5959
CALIFORNIARESIDENTS
RESIDENTS WARNING:
WARNING:Cancer.
Cancer.For
Formore
moreinformation
informationgogototowww.P65Warnings.ca.gov.
www.P65Warnings.ca.gov.See
Seepgpg3.82. Prices are subject to change without notice.
Hole
Boring
Jig
Patent Pending
Combined set has guide bushing & mid-field index pins for both
HOLE BORING JIG
20mm & 3/4" holes. Or get just the size you want. HBJ-19 Hole Boring Jig Set - 3/4" & 20mm������������������������������ $219.99
HBJI-NC-19 Hole Boring Jig 3/4" Inch Only�������������������������������� $149.99
HBJM-NC-19 Hole Boring Jig 20mm Metric Only����������������������� $149.99
NOTE: The Festool & Veritas brand names are the registered trademarks of the respective companies and are not associated with Woodpeckers, LLC.
60 Woodpeckers ®, LLC • 1-800-752-0725 • woodpeck.com
MFT Layout & Assembly Square
Accurate Set Up of your MFT Guide Rail System
Woodpeckers MFT Layout & Assembly Square makes quick work of the often-
tedious task of aligning your track saw guide rail. At 3/4" thick, this solid
phenolic square can rest flat on the table and intersect with both the fence and
the rail at the same time. No more trying to hold a framing square along the
guide rail and hoping you’ve got it aligned. If that was this tool’s only trick,
it would be a great addition your shop, but there’s more.
Great for Assembly Work, Too. Slots are milled into the square along both
edges. This lets you clamp the square to your MFT (or any workbench for
that matter), creating a vertical reference. Now you can clamp your work
perpendicular to the work surface. You can also clamp the square to two
joining workpieces, holding them square to each other. Don’t worry if you
get a little too generous with the glue during assembly…in won’t stick to the
square.
Large Machinery Set-Up Tired of setting up resaw cuts with a small square? The cut-outs in the MFT Layout & Assembly Square make it simple
The Layout & Assembly Square gives you a generous 15" on each side to use the square as a large clamping square.
and the 3/4" width keeps the square upright while you use both hands for
adjustments. At the table saw, the extra length lets you span your saw blade
from front to back while setting up your miter gauge.
Keep Your MFT Square Technically, your fence and guide rail don’t have to be
square to the holes in your MFT top to give you square cuts. But anyone who
has used the system knows that it can be reassuring when everything lines
up and you can use your stops and hold downs in conjunction with the fence.
The MFT Layout and Assembly Square comes with two 20mm location
dogs. Drop them in any two holes in an MFT table top and your square is
correctly aligned with all the holes. Now set your guide rail and fence to the
square and everyone is on the same page of the playbook.
Woodpeckers Precision and Quality. We meticulously machine the MFT
Layout & Assembly Square from a nearly indestructible solid phenolic. It’s
the same material we use for our top-of-the-line router tables. It won’t warp
or twist, and it is completely impervious to moisture. Combine the MFT Layout & Assembly Square with your guide rail for
accurate repeat parallel cuts.
Patent Pending
CALIFORNIA
6161 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
L
O
O
T
Clamp∙N∙Guide
Patent Pending
CLAMP-N-GUIDE
CNG-48 Clamp-N-Guide - 48" Capacity����������������������������������� $64.99
CNG-24 Clamp-N-Guide - 24" Capacity����������������������������������� $54.99
CNG-RA-38 Clamp-N-Guide - Router Adapter - 3/8" Rods������ $79.99
CNG-RA-516 Clamp-N-Guide - Router Adapter - 5/16" Rods��� $79.99
CNG-RA-10 Clamp-N-Guide - Router Adapter - 10mm Rods��� $79.99
CNG-RA-14 Clamp-N-Guide - Router Adapter - 1/4" Rods������� $79.99
The Clamp∙N∙Guide Router Adapter fits CNG-S Clamp-N-Guide - Stops (2pk)��������������������������������������� $19.99
almost any router that has guide rods. CNG-RG Clamp-N-Guide - Router Adapter - No Rods�������������� $19.99
2
Variable
Router Jig
Create any rectangular guide bushing template
by just sliding the tracks into position. Patent Pending
Configure Square & Rectangular Templates in Seconds. Drop the rectangular washers through the slots.
Router guide bushings change your hand-held router from an uncontrollable project destroyer
3
into a precision milling machine. But, creating the jig you need to use guide bushings is an
enormous chore that wastes time and material and hardly ever yields something that can be used
again after the current project is complete. Woodpeckers new Variable Router Jig lets you create
a perfectly square template any size from a couple inches up to 13" x 13" or 13" x 27". When
you’re done with that project, it instantly reconfigures to the next template you need. When you
don’t need it, it breaks down and stores away in a small space, waiting for your next project…
no more wall full of purpose-built templates gathering dust while you try to remember what
they’re for.
Rout mortises for joinery. Mortise in hardware like hinges and locks. Rout dadoes for inlay work,
adding visually stunning details to your projects. Once you see how easy it is to set up and use,
you’ll start inventing ways to use it to make your projects go faster and smoother.
Of course, you have to clamp the jig in place along with the workpiece. In the kit you’ll find four
clever hold-down brackets that slip into the edge of the track and allow you to clamp your work
securely and quickly. If you’re working on a perforated table like Festool’s MFT, you can clamp
Adjust to position & lock with ball end wrench.
your project without anything sticking above the level of the VRJ. The same thing can be done
on almost any workbench surface with the proper clamps and a little planning.
4
The tracks for the Variable Router Jig are clear anodized to create a tough, abrasion-resistant
surface. The lockbars are a special polycarbonate that slides easily and locks solidly in the track.
We offer two complete kits, one with four 18" tracks and one with two 18" tracks and two 32"
tracks. Both come with all the lockbars and hold-down brackets you need. If you buy the smaller
kit and later need more capacity, we sell the 32" tracks separately.
No Math, No Measuring...
Just Perfect Fitting Dadoes.
Blame it on imports, blame it on the metric system…blame it on whatever you
want, but there’s no denying that plywood and other sheet goods don’t match
their “nominal” dimensions these days. Woodpeckers new Exact Width Dado
Jig delivers perfect fitting dadoes by avoiding measuring altogether…it uses
the actual material you’re fitting into the dado as the gauge to set up the cut.
All you have to do is fit your stock snugly between the edge guides. Your router
guide bushing follows the jig’s rails while the router bit cuts a dado perfectly
matching the thickness of your stock. It’s that simple. No measuring, no test
cuts, no scrap. If you’ve ever used a track saw and guide rail, this jig works
similarly…except double…the edge guides are on the exact cutting lines of
both sides of the dado.
In its original OneTIME Tool® release, the Exact Width Dado Jig had a maximum
capacity of 24-1/2". That size is still available, but now we’ve added a 32-1/2"
model. If you need something bigger, the new 32-1/2" model is just the ticket.
Just squeeze the stock that will go into the dado between the arms. Both sizes can close down to cut a dado just 5" long.
The stock is your "set-up block". Your dado will match perfectly.
Clamps not included. The jig comes with a precision-machined 1/2" diameter template guide bushing
and a matching spacer (you’ll need it to trim edge guides). If your router doesn’t
use Porter-Cable style guide bushings, any 1/2" guide bushing and 3/8" router
bit will work. This is a bulletproof, lifetime tool that will keep your dadoes
fitting perfectly for years, no matter what the plywood manufacturers do in
the future.
Adjustable stops at
either end limit the
router's travel.
Festool Domino & bench dogs not included. “Festool” and “Domino” are registered trademarks of Festool and are not associated with Woodpeckers, LLC.
CALIFORNIA
65 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
™
Loose Tenon
Joinery Jig
Versatile Loose Tenon
Joinery with your Router.
Loose tenon joints take on a new dimension
when the fit between the mortises and the
tenon stock is precise enough to be used in
exposed joinery. Add in the ability to align the mortise
at an angle to the stock and you have Woodpeckers
newest tool, the Morty Loose Tenon Joinery Jig.
Morty uses one template and different combinations of
template guide bushings and router bits to make the 7
Patent Pending different standard mortises for loose tenons, 4mm, 5mm,
Morty cuts 7 mortise sizes, 4, 5, 6mm, 8mm, 10mm, 12mm and 14mm, the same sizes cut
6, 8, 10, 12 & 14mm. by the Festool Domino mortisers.
You have infinite control of the depth of your Adjustable stop locates mortises in a group of boards Convenient Rack-It available to store the Morty.
mortise (within the limits of your router bit). all the same distance from the end.
Just put the right router bit and guide bushing combination in your The template can be rotated in the sliding base to cut the mortise at any
plunge router, align the index marks in the template with the centerlines angle relative to your stock. This feature opens up design opportunities
of your mortise and rout away. You have infinite control of the depth of in chair and stool construction, as well as louvered doors and screens.
your mortise. For the decorative look of exposed tenons, just set your Index pins centered on the mortise template make it simple to keep
depth of cut to rout completely through your material. the ends of joining pieces matched up perfectly. Just keep the outside
faces against the reference edge and the end of your stock
against the index pin. If your reference needs to be
further away from the end of the board, just add the
stop rod and the flip stop.
Morty’s accuracy and precision comes from
its stainless steel and anodized aluminum
construction for a lifetime of reliable, rust-free
performance. The Morty kit comes complete
with the adjustable template, 4 guide bushings,
1/4" router bit, a sample of both White Oak and
Beech 8mm tenon stock, stop rods and two, 3-step
flip stops…everything you need to jump into your
next joinery project. We also offer high quality router
Index pin makes bits in optimum lengths.
repeat cuts at
an angle a very
MORTY™ LOOSE TENON JOINERY JIG
simple project. MORTY-BASIC Morty Basic����������������������������������������������������$439.99
MORTY-NC Morty Loose Tenon Joinery Jig & Rack-It™���������$539.99
MORTY-SYS Morty Loose Tenon Joinery Jig & /Systainer������$639.99
Angled mortises are just as simple as straight ones. Morty Tenon Stock available at woodpeck.com
NOTE: The Festool brand name is the registered trademark of the respective company and is not associated with Woodpeckers, LLC.
66 Woodpeckers ®, LLC • 1-800-752-0725 • woodpeck.com
Multi-Function
Router Base
Patent Pending
Micro-adjuster dials in the position of the bit. Extension rods take the edge guide out to 21" Arcs from 3/4" to 8" can be cut with axis points
from the router bit. machined into the main plate.
CALIFORNIA
67 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
O
O
L
STEADY
Band Saw
T
Template Guide
STEADYCURVE DOES FOR YOUR BAND SAW WHAT A PATTERN BIT DOES FOR YOUR ROUTER: Template follower keeps band saw blade a set distance
away from the template.
• MagSwitch clamps allow easy positioning and locking of the
SteadyCurve on your table.
• Template follower adjusts vertically for material as thin as 1/4"
and up to 4".
• Molded template followers won’t damage blades and are easily
replaced when worn.
• Works with all 12" and larger band saws with or without
table extension.
STEADYCURVE®
BAND SAW TEMPLATE GUIDE
SC-22 SteadyCurve Band Saw Template Guide�����$219.99
Handles thicker material such as furniture components
SC-22-18 Replacement 1/8" Guide 2-Pack�����������������$7.99
like chair legs.
SC-22-14 Replacement 1/4" Guide 2-Pack�����������������$7.99
Wall-mountable Rack-It
keeps your EZ Edge in plain
sight and ready for work. Patent Pending
Round-over or chamfer your projects edges in a few quick strokes
Resharpen the blades by honing the flat face of Even wild grain and spalting cut cleanly with the Controlled blade positioning insures consistent
the cutter on a bench stone. 50° bedding angle matching profiles.
CALIFORNIA
69 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
L
O
Tilting Sander Base
O
T
Adjust the base to whatever angle is most With the table, you can sand contoured edges square SandStand can bolt to the wall if your shop is
effective and most comfortable to use. to the face. crowded.
Patent Pending
Sander not included. Clamps sold separately.
70
70 Woodpeckers ®, LLC • 1-800-752-0725 • woodpeck.com
™
Patent Pending
From left to right, Blast Gate Fitting, Blast Gate-Surface Mount, Blast Gate-Inline
FULLTHROTTLE™
FTBG-F FULLThrottle 4" Fitting�������������������������������������������������������������������� $6.99
FTBG-IL FULLThrottle 4" Blast Gate, Inline�������������������������������������������������$21.99
Surface Mount Gates are perfect to mount right to FTBG-SM FULLThrottle 4" Blast Gate, Surface Mount��������������������������������$21.99
your machine. FTBG-RI FULLThrottle 4" Rack-It™�������������������������������������������������������������� $4.99
CALIFORNIA
71 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
Full & Mid-Sized
Woodturning Tools
The Evolution of Carbide Insert Woodturning
Not just easier…better. Carbide insert woodturning has gone viral Change from fast stock removal to fine finishing in the blink of an
over the last few years. And, why not? The learning curve is much eye. After initial shaping with the tool flat, roll it right or left and
shorter than traditional tools and you don’t have to buy (and learn to you’ll feel it land on another bearing plane, 45° from horizontal.
use) expensive and complicated sharpening equipment. But, when With the tool at this angle the wood fibers slice cleanly, leaving
the Woodpeckers team decided to develop a line of carbide insert a surface that needs little or no sanding. It’s a technique called
woodturning tools, we didn’t just want them to be easier to use, we shear scraping, that's been around forever. But, until now, it’s
wanted them to actually deliver the same nearly flawless surface been one of those things that separates the masters from the rest
finish a professional turner can get with a perfectly sharpened of us. Woodpeckers' shaft geometry makes shear scraping a simple
traditional tool. approach even beginners can use.
Form outside curves with the Square tool. Form inside curves with the Round tool. Cut clean, knife-edge lines with the Detail tool.
(Beads on spindles and the inside of bowls.) (Coves on spindles and the inside of bowls.) (Crisp accent lines & sharp transitions.)
It all starts at the cutting edge. We started the project by Three profiles in two sizes. The insert pocket for each of the profiles
interviewing dozens of carbide manufacturers, seeking out a has been designed to fully support the insert when installed. It
partner that recognized the unique requirements of woodturning. performs and feels like a one-piece tool when you’re turning. Use the
The result of months of testing and trials is a unique nano-grain square tool for roughing cuts and to create smooth outside curves.
carbide matrix, polished to a mirror-finish on the cutting surface Use the round tool for inside curves -- like coves in spindle work or
and precision ground on the bevel. They are the sharpest, longest the inside of bowls. Create crisp detail lines and sharp transitions
lasting inserts on the market, and coincidentally, also made right with the full-sharp detail tool. All three profiles are available in full-
here in Ohio. size (23-3/4") and mid-size (15-1/2") versions. You can buy each tool
individually or save some money with a set of three.
Insert Saver
Keep your Carbide Inserts protected when they're not on your tool.
options: full sharp and radius. The radius detail insert allows you
to create fine beads and coves just by working the tool back and
forth…no complicated “rolling beads” or “scooping coves”. The
full sharp insert takes the word “detail” to a whole new meaning. It
Handy case holds ten inserts. Transparent lid lets you take inventory excels at creating fine accent lines and cleaning up tight transition
without opening. areas.
Center Finder
excellent control when
working on delicate
projects.
74
74 Woodpeckers ®, LLC • 1-800-752-0725 • woodpeck.com
Parting Tool-Ci
Patent Pending
CALIFORNIA
75 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
Pen Mill-Ci
& Pilot Reamers
Patent Pending
Carbide Insert Technology Applied to the Pen Mill Clean cuts when
trimming acrylics,
Creating beautiful turned pens starts with carefully preparing the turning blank. exotic woods or any
The blank needs to be trimmed perpendicular to and perfectly flush with both ends other pen material.
of the insert tube. The trimming process is fundamentally important to great results,
but until now, the tools available to pen turners for that job have left a lot to be desired.
Now Woodpeckers is introducing the Pen Mill -Ci, a pen mill that effortlessly cuts
every material pen turners use…and through mountains of pen blanks.
The Woodpeckers Pen Mill-Ci uses razor-sharp nano-grain carbide inserts mounted
in a precision-machined milling head. These are exactly the same inserts used on
our Pen Size Square turning tools. The special long-life carbide edges will shave
through exotic hardwoods, acrylics, polymers, stabilized woods, cast hybrids and
even non-ferrous metals with flawless results. When the edges finally get dull,
fresh cutting edges are as simple as loosening two screws, turning the inserts 900
and locking them back down.
The Woodpeckers Pilot-Reamers that guide the Pen Mill-Ci head are cut on precision PEN MILL-Ci & PILOT REAMERS
Swiss lathes to exacting tolerances. The noses of the Pilot Reamers are fluted to PMCIB Pen Mill-Ci 5-Piece Set������������������������$109.99
carefully cut away any glue residue or brass burrs inside the insert tube and the fit PMCIDLX Pen Mill-Ci 13-Piece Set������������������$189.99
between the Pilot Reamer and the tube keeps everything perfectly aligned. PMCI Pen Mill-Ci (Head Only)����������������������������$59.99
PMPR-01 Pilot Reamer - 7mm���������������������������$12.99
Competitive pen mills drive off the pilot shaft, relying only on the set screw to
PMPR-02 Pilot Reamer Letter O������������������������$12.99
prevent the cutting head from spinning. The part that fits into your drill chuck on
PMPR-03 Pilot Reamer - 3/8"����������������������������$12.99
the Pen Mill-Ci is part of the head, and has a 3-flat design that gives you a very
PMPR-04 Pilot Reamer - 25/64"������������������������$12.99
positive lock when you tighten your chuck.
PMPR-05 Pilot Reamer - 10mm�������������������������$12.99
We offer the 12 most popular sizes, covering virtually every pen kit on the market. PMPR-06 Pilot Reamer - 10.5mm���������������������$12.99
If you turn several different pen styles, we offer two sets. The 5-piece set includes PMPR-07 Pilot Reamer - 27/64"�������������������������$12.99
the Pen Mill-Ci and the four most popular Pilot Reamers. The 13-piece set includes PMPR-08 Pilot Reamer - 11mm�������������������������$12.99
the Pen Mill-Ci and all 12 Pilot Reamers. Both sets come in a Woodpeckers plastic PMPR-09 Pilot Reamer - 15/32"������������������������$12.99
case with a custom cut foam liner to keep everything safe and organized. If you PMPR-10 Pilot Reamer - 31/64"�������������������������$12.99
only make one or two style pens, you can buy the Pen Mill-Ci milling head and just PMPR-11 Pilot Reamer - 12.5mm����������������������$12.99
the Pilot Reamers you need. PMPR-12 Pilot Reamer - 33/64"�������������������������$12.99
76
76 Woodpeckers ®, LLC • 1-800-752-0725 • woodpeck.com
Pen Mandrel
System
The Ultimate Pen Mandrel System
If you’ve turned more than a couple pens, you’ve probably noticed
that there’s just not much material left on top of the brass tube
when you get finished. Any amount of misalignment can show up
as brass showing through acrylic or even worse, a complete blow-
out. None of the mandrels available on the market today seem to
help matters much, until now. Introducing the Woodpeckers Pen
Mandrel System. Each component is designed and manufactured
with one goal…keeping your pen perfectly centered on your lathe.
At the headstock side, the mandrel shaft slides into a 12-segment
System includes drive head, collet. Expose just the amount you need and close the collet with the
live center and precision locking collar. The shaft is perfectly centered and locked securely.
ground mandrel.
On the tailstock side, the mandrel shaft goes into another
12-segment collet. You won't have to put extra spacers on to take
up the unused shaft, just slide your tailstock right up tight to your
work. As you tighten your tailstock, the cap compresses the collet,
centering the mandrel shaft perfectly.
PEN MANDREL SYSTEM While we were designing the world’s best pen mandrel, we decided
USPMD Pen Mandrel System (#2 Morse Taper) �������� $159.99 to make the world’s best bushings to go along with it. Woodpeckers
Precision Pen Bushings are more durable and fit the mandrel shaft
and the tube diameter better than any others out there. They match
PRECISION PEN BUSHINGS the pen kit specs for outside diameter to the strictest tolerance.
BUSHINGSET Bushings 11-Piece Set ��������������������������������������������� $139.99
Unlike ordinary bushings, ours are turned from hardened stainless
25001 Bushings for Slimline (7mm) Pencil & Ballpoint Pens ���������� $15.99
steel, and engraved with their part number so you won’t have to
25002 Bushings for all Sierra Family Pens��������������������������������������� $13.99
guess about which bushing goes with what kit. The portion that
25003 Bushings for Cigar Ballpoint Pens���������������������������������������� $13.99
fits inside the pen blank is longer, providing additional support,
25004 Bushings for Lever Action/Fireman Ballpoint Pens�������������� $13.99
and the bushings for two-piece pens are clearly marked to mate up
25005 Bushings for Motorcycle Pens���������������������������������������������� $13.99
with your blanks correctly.
25007 Bushings for Bolt Action Pens ��������������������������������������������� $13.99
25009 Bushings for Sierra Vista Ballpoint Pens������������������������������ $13.99 We also turned a wear groove in the bushing just back from where
25012 Bushings for Blade Ballpoint Pens ��������������������������������������� $13.99 it enters the pen blank. As long as you can see that groove, your
25008 Bushings for Baron/Sedona Rollerball & Fountain Pen�������� $15.99 bushing will give you perfect alignment to the kit components.
25010 Bushings for Atrax/Triton Rollerball & Fountain Pens ���������� $15.99 After a mountain of finished pens, when the wear groove is gone,
25011 Bushings for Churchill/Cambridge Pens������������������������������� $15.99 you’ll know it’s time to get a new bushing set.
Patent Pending
CALIFORNIA
7777 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
Multi-Knobs
Always Have the Right Knob with Multi-Knobs
How do you always have the right knobs when you're building jigs contoured and textured for a secure, comfortable grip. Stock up on
and fixtures in your shop? Some need to be a stud (of unknown length) these versatile knobs so that you won’t come up short when making
and others need to be a nut. Woodpeckers Multi-Knobs come to the your next jig. You supply the nuts, bolts and jig-making ingenuity; we
rescue. These heavy-duty polycarbonate knobs will receive either a supply the Multi-Knobs to bring your jig designs to life.
nut or the head of a hex head bolt into the tapered socket. Once the
fastener is pressed into the taper, it's just as strong (or stronger) than a MULTI-KNOB
molded knob. MKNB14X4 Multi-Knob 1⁄4" (4pk)������������������������������������ $7.99
Woodpeckers Multi-Knobs come sized to accept standard hex-head MKNB38X4 Multi-Knob 3⁄8" (4pk)���������������������������������� $7.99
nuts and bolts in three common sizes: 1/4", 5/16" and 3/8". We make our MKNB516X4 Multi-Knob 5⁄16" (4pk)�������������������������������� $7.99
knobs beefier than others on the market, with a full 1/4" of reinforced MKNB14X12 Multi-Knob 1⁄4" (12pk)������������������������������ $22.99
plastic beneath the hex-shaped recess. Our heavy-duty Multi-Knobs MKNB38X12 Multi-Knob 3⁄8" (12pk)������������������������������$22.99
are also designed for good “feel,” with working surfaces that are MKNB516X12 Multi-Knob 5⁄16" (12pk)���������������������������$22.99
MKNBSUPER Multi-Knob Super-Pack���������������������������$63.99
.Includes (12pk) 1/4", (12pk) 5/16" & (12pk) 3/8"
MINI T-KNOB
MMKB1410 Mini T-Knob 1⁄4" (10pk)�������������������������������� $7.99
Any
Standard
Hex Bolt
Patent Pending
Track Nuts
Track Nuts open up a host of design options when building jigs and fixtures
with T-Track. Their long body with softened ends slide smoothly in tracks
and provide extra surface contact when clamping down. We carry several
different sizes, covering most of the available track on the market, not just
ours! We have them in 7/16" width with 10-32 threads, 7/16" width with
1/4"-20 threads, 1/2" width with 1/4"-20 threads and 5/8" width with 5/16"-
18 threads.
Special optional
hardware kit locks MSN-4PC Miter Slot Nuts & Hardware (4pk) ���������������� $21.99
into 3/4" T-slot
miter track.
Dual-Purpose Track
Woodpeckers Dual-Purpose Track is configured with two slots on one side and one on the other. All three
slots are directly compatible with any 1/4" hex-head bolt or nut. This configuration allows for installation
with bolts, virtually eliminating the possibility of pull-out. A variety of very useful clamping fixtures can be
built by embedding Dual-Purpose Track into a horizontal surface. Measures 1/2"-tall x 1-3/4"-wide.
DPTRACK24 24" Dual-Purpose Track��������������������$18.99
DPTRACK36 36" Dual-Purpose Track�������������������$24.99
DPTRACK48 48" Dual-Purpose Track�������������������$29.99
1/4" T-Track
Get set for making a wide variety of jigs with Woodpeckers 1/4" T-Track. Available in 24", 36" and 48"
lengths, our 1/4" T-Track provides you with plenty of jig-making possibilities. This track’s inside profile
will hold standard 1/4"-20 hex-head bolts and similar profile hardware. Once anchored to a jig base with
construction adhesive or screws (mounting holes are provided on 4" centers), this versatile track can
anchor hold-down clamps, stop blocks and even other aluminum track. The outside profile is slightly
wider at the top to facilitate easier mounting in dadoes that don’t have perfectly square inside corners.
You’ll want to stock up on this affordable extrusion — it’s very handy if you like to make jigs and
fixtures. Measures 1/2"-tall x 3/4"-wide.
T24 24"- 1/4" T-Track��������������������������������������������� $11.99
T36 36"- 1/4" T-Track���������������������������������������������$21.99
T48 48"- 1/4" T-Track���������������������������������������������$27.99
CALIFORNIA
79 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
WHEN YOU’RE READY FOR BETTER.
Mini-Scraper
Cleans Glue Residue
Even in the Tightest Spots
You’ll wonder how you ever got along without it. This tool
excels at glue removal and is an effective wood scraper that
Square gets into tight places regular scrapers can’t reach.
Standard Carbide
Carbide Blade Our solid carbide blade starts sharp, stays sharp. Carbide
Blade tooling holds a sharp edge for a long time. The Mini- Scraper
delivers long-life with four edges. The blade edges have a
slight camber to help prevent marring your wood. We also
offer an optional, perfectly square insert for getting into square
corners. Replacement blades are available.
The Mini-Scraper’s rugged carbide blade will pop the
toughest dried glue right off your work. When you find
dried glue in a tight corner, the Mini-Scraper with the
optional square insert removes it with ease.
You can scrape dry wood using a pushing motion at a low
angle for an aggressive, bulldozer-like cut. To produce a
finish quality cut, use a pulling motion with the handle held
at a high angle. Easily clean wet glue off your scraper with
just a damp rag.
The Carbide Blade easily removes dried The standard cambered edge insert
MINISCRAPER
glue from your work. protects surfaces from gouging. The MSCRAPE Mini-Scraper�������������������������������������� $21.99
optional Square Carbide Blade gets tight MSCRAPE-CB Replacement Carbide Blade����������$11.99
Patent Pending in corners. MSCRAPE-SQ Square Carbide Blade��������������������$11.99
CUBBY DRAWERS
CUBDRWR Cubby Drawers - Set of 6������������������������$21.99
CUBDRWRX2 Cubby Drawers - Set of 6 (2pk)���������� $43.98
CALIFORNIA
81 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
Rails can be moved closer Patent
Pending
together when not using the
Plywood base
full 48-1/2" width. and router
not included
Slab Flattening
Mill∙PRO
Slab Flattening Mill∙PRO has Greater Thickness Range,
More Width & Standard Dust Collection
Imagine being able to mill a flat face on a live edge slab over 4' wide Using the Slab Flattening
and up to 3-3/8" thick without having to shim the rails or your work Mill∙PRO is as easy as sliding
piece. Or go the other way and imagine milling something just a your router across the slab and
fraction of an inch thick, again without shimming either your stock back, moving over and repeating
or the rails. Imagine milling slabs up to 134" in length (that’s right… until you’re done. This process
over eleven feet!) with virtually all the shavings being captured by produces lots of shavings but the
your dust collector. It’s time to stop imagining and start milling with twin pick-up points and rugged, full-
Woodpeckers Slab Flattening Mill∙PRO. surround curtain capture well over 90% of
Slab Clamping Dogs
The hottest trend in interior design these days is live edge slabs. And, all shavings and dust. secure the stock
to the base.
Lower carriage for thin slabs or rough lumber. Raise carriage for thick, heavy slabs. Fully integrated dust collection collects equally
well on push or pull cuts.
why not? The natural curves of the trunk give an organic feel. Don’t beat yourself up if you bought the original and now love the
Even cracks that would have sent lumber to the burn pile just a features of the PRO…the Conversion Kit puts the new router carriage
few years ago are being highlighted with butterfly patches and on your system. Woodpeckers now has a variety of surfacing cutters
epoxy inlays. However, overall width and odd grain changes including ones with interchangeable carbide tips. For edge milling we
make milling slabs impractical if not impossible in the average offer solid carbide spiral bits in several diameters and lengths.
shop.
Woodpeckers Slab Flattening Mill∙PRO guides your router over SLAB FLATTENING MILL∙PRO
your slab in a controlled plane. Since you’re using a router SLBFPRO-BAS Basic Slab Flattening Mill∙PRO��������������������������� $999.99
instead of a planer-style cutterhead, tear-out is minimal. And SLBFPRO-XL Extended Slab Flattening Mill∙PRO�����������������������$1299.99
thanks to our uniquely engineered rails and enhanced solid steel SLBFLT-EXT-24 24" Extension Kit Slab Flattening Mill∙PRO���������$149.99
carriage, the surface will only need a light sanding afterwards. SLBFLT-EXT-48 48" Extension Kit Slab Flattening Mill∙PRO��������$219.99
The carriage adjusts in height by a full 2-1/2". Depending on SLBFPRO-EXT 76" Extension Kit Slab Flattening Mill∙PRO���������� $369.99
your router and router bit, you can work on stock just a fraction SLBFPRO-CONV Carriage Conversion for Slab Flattening Mill����� $449.99
of an inch thick or up to 3-3/8” without ever shimming either the SLBFLT-CD4 Slab Clamping Dogs (4pk)����������������������������������������$16.99
rails or the slab.
DON’T FORGET Check out Woodpeck.com for a full line of
THE ROUTER BITS! Ultra-Shear™ Router Bits.
82 Woodpeckers , LLC • 1-800-752-0725 • woodpeck.com
®
T
O
O
L
Rout-N-Plane
Bench Top
Board Mill
Surface End Grain Boards With Any Size Router!
Woodpeckers Rout-N-Plane Bench Top Board Mill delivers a safe, easy board and spin in the locking knobs. The powder-coat finish slides
and fun way to mill end-grain cutting boards and other odd-shaped easily across benchtop surfaces and provides a low-friction surface
or highly figured stock that you just can’t feed into a planer. Just fix for your router base, too.
your board to a flat table at least 22-1/2" wide, adjust the Rout-N-
While we focused of end grain cutting boards when we engineered
Plane height just above the board and set your router depth of cut to
Rout-N-Plane, it turns out they’re just the beginning. Think of a
shave a little off the top. In minutes you’ll have a flat board ready for
twisted plank wider than your jointer with grain too beautiful to cut
finish sanding.
up and glue into a panel. Fix it to a piece of MDF with shims and hot-
Rout-N-Plane offers convenience and flexibility you can’t get with melt glue and surface it flat with Rout-N-Plane. The same thing can
shop-built sleds. It adjusts in seconds to safely guide any router across be done with 15" and under natural edge slabs. If it’s under 3" thick
your board and can handle thicknesses from 3/4" to a full 3". It works and narrower than 15", you can level it with Rout-N-Plane.
on boards up to 15" wide (based on a 6" router base with a 1"diameter
cutter). And length is only limited by how much table you have.
Adjusting the height of Rout-N-Plane couldn’t be simpler. Just find
the tab setting on the ends that puts the router support just above your
ROUT-N-PLANE™
BENCH TOP BOARD MILL
BTBM Rout-N-Plane Bench Top Board Mill����������������� $169.99
Not just for cutting boards...surface any material under 15". DON’T FORGET Check out Woodpeck.com for a full line of
THE ROUTER BITS! Ultra-Shear™ Router Bits.
CALIFORNIA
8383 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
™
and ™
L
O Fast Adjustment, Convenient Fine Tuning and
O
Patents
Top-of-Table Bit Changes Are Just the Best
T
UNIQUE FEATURES:
• Instant quick lift with spring-assisted wrench. QUICKLIFT™ PRECISION ROUTER LIFT
QL420-HDS-23 QuickLift HDS Fits 4.2" Router Motors�������$399.99
• Convenient insert-crank micro-adjustment.
QL350-HDS-23 QuickLift HDS Fits 3.5" Router Motors��������$399.99
• One-piece motor carriage for maximum rigidity. QL414-HDS-23 QuickLift HDS Fits 4.14" Router Motors�������$399.99
• Extra long sleeve bearings for effortless travel. QL420-A-23 QuickLift Fits 4.2" Router Motors���������������������$349.99
• Includes three self-leveling twist lock rings and spanner wrench. QL350-A-23 QuickLift Fits 3.5" Router Motors���������������������$349.99
QL414-A-23 QuickLift Fits 4.14" Router Motors��������������������$349.99
Secure to table with thumbwheels. Includes three twist lock rings & a Now with crank for micro-adjustment! Solid-steel starting pin.
spanner wrench.
NOTE: The Porter Cable, Dewalt, Craftsman and Milwaukee brand names are the registered trademarks of the respective companies and are not associated with Woodpeckers, LLC.
3.25
HP
2.25
HP
A PERFECT FIT FOR
THE WOODPECKERS
ROUTER TABLE!
Woodpeckers isn’t the first company to offer phenolic router tables, but we
can say with confidence that ours are the best. Phenolic sheet stock can
vary greatly. We tested samples extensively before finding a grade that
met our requirements for strength, durability, flatness and uniformity.
But, our quality control didn’t end there. We machine all our phenolic
router tables on our own state-of-the-art CNC equipment. In-house
manufacturing allows us to offer the best quality and also the best value.
If you want an exceptional level of durability that includes resistance to Build your own base
for our Phenolic Router
moisture, chemicals, impact, abrasion and temperature variation, you Table Top or add it to a
won't find a better option than a Woodpeckers Phenolic Router Table Woodpeckers Stand.
Top. Both table sizes feature a 9-1/4" x 11-3/4" router plate opening.
Fence-mounting tracks, a track for horizontal featherboards and a miter
gauge channel are milled directly into the phenolic, minimizing material RT2432PH 24" x 32" Solid Phenolic Router Table Top w/ Milled Slots
removal and maximizing rigidity. All features perfectly match our other ���������������������������������������������������������������������������������������������������$249.99
router accessories...SF-PRO fence, router plates and router lifts. The RT2743CPH 27" x 43" Solid Phenolic Router Table Top w/ Milled Slots
tables are pre-drilled for effortless mounting to our router stands. �������������������������������������������������������������������������������������������������� $399.99
Patent Pending
SUPER TRACK
FLIP STOP
STFSTOP Super Track Flip Stop (ea)������������������$49.99
3/4" 7/8" 1-3/8" 1-5/8" 1-7/8" 2-1/8" 2-3/8" Solid TLRSET-ML 8-Pc Twist Lock Ring Set in Storage
Rack�������������������������������������������������������� $49.99
TLR-3PCM 3-Pc Molded Ring Set������������$15.99
CALIFORNIA
89 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
Router Table Packages
L
O 7 Pages of Router Table Parts…Want Some Help?
O
T
Premium QuickLift
Router 24x32 27x43 24x32 27x43 QuickLift HDS 20x27 20x37
Table MDF MDF Phenolic Phenolic Aluminum Router Router SF-PRO Adjustable Adjustable Wheel Price
Package Table Top Table Top Table Top Table Top Plate Lift Lift Fence Router Stand Router Stand Kit Starting At
We make some really great router table equipment.
In fact, we make so much of it, it’s pretty easy to
get confused and a little lost. To help you out with
PRP
BASIC
$899.99
package.
Once you decide which Package you want, the next
PRP
2 $1529.99
PRP
4 $1699.99
Visit Woodpeck.com for Premium Router Table Packages including the SpinRite Router Motor.
SF-PRO
Router Table
Fence QuickLift HDS
Adjustable
Router
Stand
CALIFORNIA
9191 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
Iron-Grip™
Coping
Sled
Patent
Pending
Sled
Guides
Sled guides along the fence,
rather than the miter gauge track.
Iron-Grip Puts You in Control
of Tricky End Grain Cuts.
Woodpeckers new Iron-Grip Coping Sled improves on our ever-popular original
Coping Sled and beefs it up with a stiffer base, larger fence guide and the Iron-
Grip clamp (which gives you two points of contact but only one knob). It’s the
stiffest, flattest and most secure coping sled on the market.
The foundation of the Iron-Grip is a precision-machined anodized aluminum base
milled from cast and ground tool plate – the most stable aluminum material on the
market. Four UHMW glide strips are added to the bottom of the 11-1/2" square
base to minimize friction and keep it moving smoothly. What you won’t find on
the bottom of the base is a bar to fit in a miter gauge slot. It doesn’t need one.
Instead of guiding off the miter gauge track, the Iron-Grip Coping Sled guides
off the fence. This eliminates the tedious job of aligning the fence perfectly
parallel to the track. Just get the fence aligned to the bearing of the router bit,
align the fence guide on the coping sled to the router table fence and you’re Sacrificial backer board prevents back-side tear-out in
good to go. expensive hardwoods.
The crystal-clear fence guide is 3/8" thick and 15-1/2" long, making it ideal to
work with any router table fence at least 3" tall). With 3" of depth adjustment, it
can even handle the deep tenon cuts needed on entry doors.
We’ve taken a “belt and suspenders” approach to securing your work to the
Iron-Grip Coping Sled. First, an adjustable top plate captures your work against
the rigid back fence, preventing rotational movement. Second, coming down
from the top, the new Iron-Grip stainless spring steel clamp gives you two points
of contact with only one knob to adjust.
The clamp slides effortlessly right or left to position the clamping pads right
where you need them. Once adjusted to the thickness of your stock, it takes less
than one full turn of the knob to release the stock and slide in the next piece. It’s
faster than a pair of toggle clamps and won’t distort your sled the way toggle
clamps do. The adjustable plate accommodates stock up to 5-3/4" wide and the Two points of clamping contact with one screw makes the
Iron-Grip clamp holds stock up to 1-3/4" thick. Iron-Grip fast and secure.
The newly designed back fence has a T-slot to mount a sacrificial backer. The
backer prevents blow-out where the router bit exits your stock. Just chop the
end off and slide the piece forward when you change projects. You’ll get three
IRON-GRIP COPING SLED
IGCS Iron-Grip Coping Sled����������������������������� $369.99
MDF backer boards with your Iron-Grip, and when they’re gone you can make
IGCS-SB Sacrificial Backer 3-pk���������������������������$19.99
your own from scraps or we offer them in convenient 3-packs.
Coping Sled
shown in use on a
Woodpeckers Router
Table (Sold separately).
Patent Pending
CALIFORNIA
93 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
93
L
O
O
T
Iron-Grip™
Small Parts Holder
Hold On to Small Pieces Safely When Working On Your Router Table.
Woodpeckers Iron-Grip Small Parts Holder enhances your safety and extension of your workpiece beyond the jaws is set and repeatable, no
improves accuracy when routing small workpieces on your router matter how many pieces you have to rout! There are 5 sets of threaded
table. The idea has been around for quite some time, but the build holes in the jaws for the stop pins, ranging from 1/2" from the edge to
quality of most versions on the market leaves a lot to be desired. 3-3/4" from the edge. When you don't need the stop pins, they store
Instead of plastic jaws and a too-small vise screw, we engineered in conveniently on the outside of the jaws.
substantial aircraft grade aluminum jaws and a heavy-duty Acme- Since bearing-guided router bits aren't the only toys in the box, we
threaded stainless steel vise screw that holds your work in…well… added a fence guide to the Iron-Grip. No matter how narrow your
an Iron-Grip. We also added in a fence guide similar to our Coping workpiece, you can rout it safely across any straight bit. Just align
Sled so the Iron-Grip isn't limited to bearing-guided router bits; you your stock and the fence guide to the fence. The fence guide slides
can use it to cut rabbets, dadoes, grooves, tenons and half-lap joints along the fence, carrying your narrow workpiece perfectly through the
on small parts easily, accurately and safely. And, we redefined "small cut. Most of us have learned the trick of backing up our workpiece
parts" extending the clamping capacity to 10-1/2". with scrap stock to prevent backside tear-out and Iron-Grip's secure
When you're using a bearing-guided router bit, Iron-Grip moves your clamping and positive alignment makes that a snap.
hands out of the way and effectively makes your workpiece "bigger"
by clamping it in the same plane as the 3 aluminum clamp blocks.
Depending on the profile of your router bit, parts as small as 3/4" x
3/4" can be gripped securely and routed safely.
IRON-GRIP™ SMALL PARTS HOLDER
We built in another time-saving and accuracy-improving feature. IGSPH Iron-Grip Small Parts Holder��������������������������������$169.99
Install the threaded stop pins in a set of holes in the jaws. Now the IGSPH-EX Extended Capacity Fence���������������������������������$19.99
Cut tenons, half-laps, dadoes, grooves and rabbets on Stop Pins help secure the workpiece and make Fence Guide allows use of non-bearing router bits.
small workpieces. Allows 1-1/2" depth of cut. repetitive cuts quick and easy.
WP-PUSHGRD PushGuard��������������$29.99
Get a grip on your work & stay safer with Push Guard.
Freehand Guard
If you're doing free hand routing, you know how tricky it
can be to start the cut. Router bits tend to spin the board
and gouge the wrong edge when you start the cut. This often
results in damage to your carefully shaped furniture parts.
Starting Pins can help you gain control but don't offer dust
collection or protection from flying chips. The Woodpeckers
Freehand Guard does all these things in a well built, high
quality form. Patent Pending
Variable-Pressure Featherboard
Keep Your Stock in Position With Special optional Miter Slot
Something Other Than Your Hands Nut & hardware kit locks
the featherboard into any
Whether you use a featherboard on the router table, 3/4" T-slot miter track.
See page 87.
band saw or table saw, the goal is always the same;
enhance precision and safety by keeping the workpiece
in contact with the fence and table. But, getting a
featherboard’s clamping pressure just right has always
been a trial-and-error process, until now. Woodpeckers
Variable-Pressure Featherboards eliminate this fuss
and frustration. Now you can lock the featherboard
in place on the fence or table, then slide a
tensioning plate up or down to fine-
Patent Pending
tune the finger pressure. A
single thumbscrew locks in
the tension setting.
Sold in pairs, our Variable-
Pressure Featherboards are
designed to attach to any 1⁄4"
T-track. Buy our optional Miter Slot Nut
hardware package to attach featherboards to
a standard 3/4" x 3/8" T-miter channel.
Variable-Pressure
Featherboards
VPFB Variable Pressure Featherboards (2pk) ������$44.99 shown in use on a
MSN-4PC Miter Slot Nuts & Hardware (4pk) ��������� $21.99 Woodpeckers Router
Table (Sold separately).
CALIFORNIA
95 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
L
O
O
T
96
96 Woodpeckers ®, LLC • 1-800-752-0725 • woodpeck.com
Shop Dustpan &
Bench Brush
Cleanup Has Never Been Easier!
You can always count on Woodpeckers for high-quality, high-precision
woodworking tools, but now you can count on Woodpeckers for shop cleanup,
too! Our signature Dustpans are suited for rugged shop use—made from
heavy-duty aluminum and designed to sit flat on the floor without having
to be held. Sweep up your debris with the high-quality Woodpeckers Bench
Brush—a static-neutral handle with anti-static, soft horse-hair bristles.
Dustpans are available in two sizes: 11-1/2" wide and 17" wide. Our Bench
Brushes are 13-1/2" long with a 1/4" x 2-3/4" brush fade. Made in the USA.
Signature Mug
Your new favorite mug at home or in the shop!
Enjoy your “Morning Joe” with your favorite e tool brand! Our features our T-Square with a visitor who seems to have mistaken
hand-thrown mugs may look similar, but no two are alike - each it for a hickory tree. It’s perfect for everyday use, whether you use
is handmade by Deneen Pottery in Minnesota. Our signature mug it for your favorite beverage or to corral small tools in your shop.
is a 4-1/4" tall "rancher" mug. This year's glaze engraved emblem Dishwasher and microwave safe.
'em
Get You
l e
Whi n!
Ca LIMITED
EDI-
COLLECTOR'S
SERIES No.5
UT
SOLD O
UT
UT SOLD O UT
SOLD O Collector's Series No.1
SOLD O
Collector's Series No.4
WP-232-MUG Signature Rancher Mug 2023��������� $29.99 Collector's Series No.3
Collector's Series No.2
SHOP NOTEPAD
GR-NOTEPADX3 Shop Notepad (3pk) .��� $19.99
Flawless mortise & tenon joinery in 1/4", Templates available for both through and Round tenons are ideal for stool and chair
5/16", 3/8" and 1/2" tenon thickness. half-blind dovetails in multiple sizes. construction. Templates from 1/2" to 1-1/4".
minutes by combining table angles and template choices. But mortise The rock-solid engineering of the Multi-Router is backed up with
and tenon joinery is just the beginning of what the Multi-Router can top-flight manufacturing. The machine is comprised of six solid,
do. You can also do sliding dovetails, through dovetails, box joints, CNC-machined aluminum castings. Anything that slides does so
loose tenon joints and more. The Multi-Router is a serious, heavy-duty on precision linear ball bearings. Anything that locks does so onto
machine that will help you take your woodworking to the next level. hardened steel surfaces that won’t mar. Anything you touch has been
One feature our customers constantly rave about is the template made to feel comfortable and inspire confidence.
system. The precision-machined templates guide the stylus on a You can build your own stand for your Multi-Router (it makes a great
perfect track. The templates feature perfectly square shoulders, not starting project) or get the factory steel base and get right to work.
beveled edges, so there’s no need for trial-and-error test cuts every The standard engraved scale can be replaced with the optional,
time you switch between mortise and tenons. By allowing the ball American made digital read-out. You can add extra hold-down clamps
bearing stylus to follow a precise template, human error is virtually or supplement them with optional pneumatic clamps. There are also
eliminated. Just keep the stylus on the template and make your cut. It’s numerous optional template sets you can add. In other words, you can
that easy! All the controls are intuitive and conveniently located. The customize your Multi-Router to fit your shop and your workflow.
workpiece travels in the X and Y axes (in-out and side-to-side). The
Optional Pneumatic Clamps speed up production work. Pro-Scale Digital Read-Out improves adjustment speed and accuracy.
MULTI-ROUTER
MR10010 Multi-Router w/ Dust Cabinet������������������������������ $2999.00 MR11858 Circular Tenon Template 1-1/4"��������������������������������������� $44.95
MR13500. ProScale Digital Measuring System������������������������$449.00 MR11809 Circular Tenon Template 1"��������������������������������������������� $44.95
MR10355 PC-1 Pneumatic Clamps����������������������������������������$399.00 MR11759 Circular Tenon Template 3/4"������������������������������������������� $44.95
MR10157 Machine Stand��������������������������������������������������������$235.00 MR10553 Circular Tenon Template 1/2"������������������������������������������� $44.95
MR10207 Extra Manual Clamp�������������������������������������������������$79.00 MR00702 Button Stop����������������������������������������������������������������������� $5.95
MR10552 Box Joint Template 1/4"��������������������������������������������$52.95 MR10702 Tenon Template Holder��������������������������������������������������� $48.95
MR11908 Box Joint Template 3/8"��������������������������������������������$52.95 MTCT50 1/2" Mortise & Tenon Template Set ������������������������������� $139.99
MR10603 Dovetail Template Set 3/4"����������������������������������������$88.95 MTCT375 3/8" Mortise & Tenon Template Set ����������������������������� $139.99
MR12919 Dovetail Template Set 1/2"����������������������������������������$68.95 MTCT3125 5/16" Mortise & Tenon Template Set �������������������������� $159.99
MR12906 Mitered Dovetail Template�����������������������������������������$52.95 MTCT25 1/4" Mortise & Tenon Template Set �������������������������������� $159.99
CALIFORNIA
99 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
CALIFORNIA
99 RESIDENTS WARNING: Cancer. For more information go to www.P65Warnings.ca.gov. See pg 3. Prices are subject to change without notice.
13700 Prospect Road • Strongsville, OH 44149
1-800-752-0725 • woodpeck.com
RackBit
Router Bit Storage System
A Modular Approach to Router Bit Storage.
It doesn’t take long to have a lot of money tied up in router bits. Protecting those valuable edges
and keeping track of them challenges even the most organized among us. Woodpeckers new
RackBit Router Bit Storage System allows your storage solution to grow as your collection
of bits grows. The system starts with the molded bit bases, which hold both 1/4" and 1/2" Three sizes give you options to grow your storage.
shank router bits. The powder-coated steel rack mounts to your wall, a cabinet or the side of
your router table and holds the bit bases neatly and securely, with your router bits in plain
sight and within easy reach.
The unique geometry of the base uses two levels and spring tension to securely grip both 1/4"
and 1/2" shanks. You can take the bit base completely out of the rack when you’re getting
ready for a router cut. It will keep your bit upright on your bench while you get your router
ready. No matter what space you have or how many router bits you have, we have three
different rack sizes to match your needs.
The 9" rack holds up to 6 router bits, the 18" holds up to 12, and the 27" holds up to 18. We
laser cut the racks from 18-gauge steel, form them on a CNC press break, and then give them
a tough, attractive powder-coat finish. The bit bases are injection-molded from resilient ABS
Each base can hold either 1/2" or 1/4" shanks.
plastic. Altogether, this is a system that will last most woodworkers a lifetime.
If you want to build your own storage solution, we also sell the bit bases separately. Whether
you’re designing a drawer, cabinet or wall-mount, the 1-1/2″ bases group easily into rows
and columns.