Professional Documents
Culture Documents
EN ISO 13680 (2008) (E) Codified
EN ISO 13680 (2008) (E) Codified
10/2008
ILNAS-EN ISO 13680:2008
National Foreword
https://portail-qualite.public.lu/fr/normes-normalisation/participer-normalisation.html
English Version
Industries du pétrole et du gaz naturel - Tubes sans Erdöl- und Erdgasindustrie - Nahtlose Rohre aus
ILNAS-EN ISO 13680:2008 - Preview only Copy via ILNAS e-Shop
soudure en acier allié résistant à la corrosion utilisés korrosionsbeständigen Legierungen zur Verwendung als
comme tubes de cuvelage, tubes de production et tubes- Futter- oder Steigrohre sowie Muffenvorrohre - Technische
ébauches pour manchons - Conditions techniques de Lieferbedingungen (ISO 13680:2008)
livraison (ISO 13680:2008)
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13680:2008: E
worldwide for CEN national Members.
EN ISO 13680:2008 (E) ILNAS-EN ISO 13680:2008
Contents Page
Foreword..............................................................................................................................................................3
ILNAS-EN ISO 13680:2008 - Preview only Copy via ILNAS e-Shop
2
ILNAS-EN ISO 13680:2008 EN ISO 13680:2008 (E)
Foreword
This document (EN ISO 13680:2008) has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum and natural gas industries" in collaboration with Technical
Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the
latest by April 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
ILNAS-EN ISO 13680:2008 - Preview only Copy via ILNAS e-Shop
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 13680:2008 has been approved by CEN as a EN ISO 13680:2008 without any modification.
3
INTERNATIONAL
ILNAS-EN ISO 13680:2008
ISO
STANDARD 13680
Second edition
2008-10-15
Reference number
ISO 13680:2008(E)
© ISO 2008
ISO 13680:2008(E) ILNAS-EN ISO 13680:2008
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
ILNAS-EN ISO 13680:2008 - Preview only Copy via ILNAS e-Shop
Contents Page
Foreword............................................................................................................................................................. v
Introduction ....................................................................................................................................................... vi
1 Scope ..................................................................................................................................................... 1
2 Conformance......................................................................................................................................... 2
2.1 Dual normative references................................................................................................................... 2
2.2 Units of measurement .......................................................................................................................... 2
3 Normative references ........................................................................................................................... 2
ILNAS-EN ISO 13680:2008 - Preview only Copy via ILNAS e-Shop
9.12 Straightness......................................................................................................................................... 22
9.13 Mass determination ............................................................................................................................ 23
9.14 Hydrostatic test ................................................................................................................................... 23
9.15 Visual inspection................................................................................................................................. 23
9.16 Non-destructive examination............................................................................................................. 24
10 Surface treatment................................................................................................................................ 29
10.1 Group 1................................................................................................................................................. 29
10.2 Groups 2, 3 and 4 ................................................................................................................................ 29
11 Marking................................................................................................................................................. 29
11.1 General ................................................................................................................................................. 29
11.2 Marking on the product ...................................................................................................................... 29
11.3 Date of manufacture ........................................................................................................................... 31
12 Surface protection — Group 1 ........................................................................................................... 31
13 Documents........................................................................................................................................... 31
13.1 Electronic media ................................................................................................................................. 31
ILNAS-EN ISO 13680:2008 - Preview only Copy via ILNAS e-Shop