8 MARUTI ENTERPRISE @&
G1, GIDC ESTATE, PHASE.1, BLUE STAR ROAD, NARMADA NAGAR -392015, BHARUCH.
[7 “or insPECTION, CERTIFICATION AND CALIBRATION OF EQUIPHENT AS PER FACTORIES ACT]
MOB.: 9825684100 - Office no.: 9409205373 & 8141617127 E-mail: maruticpb@yahoo.in
Test Certificate No.: HES- 125/21 Date: 28/06/2024
FORM NO: 10
(Prescribed under rule 60)
Prescribed for report of the lifting machines, ropes an lifting tackles
PARTICULARS
Registration No: License No:
NIC Code No: NA (As given In the license)
1. Name of Occupier of Factory : MIS, HOPE ENGINEERING SOLUTIONS.
2. Address of the Factory +: M-403, SILENT PARK CHS. LTD. MIRA BHAYANDER ROAD
: NEAR GOLDEN NEST, BHAYANDER-EAST, THANE-401105,
3, Distinguishing Marks and des
To identify the lifting machine, lifting tackle etc. : SWL: 05 Ton, SR.Nt
+ Length: 03 Mtrs, Color:
tion sufficient : Polyester Webbing Sling, Make: 'N.A’,
004315,
4, Date when lifting machine was first used in the : 2021
Factory Wh i
5. Date of each examination made under section : Through Visual itspection, Ph
29(1)(a)(i) and by whom it was carried out
: By Mr. Manoj Panchal on 28/06/2021
6.Date and number of the certificate relating to: By Marlufacturer |
‘Any test and examination made under sub-rule i
Of rule 60 together with the name of the
Person who issued the certificate vl!
7. Date of annealing or other heat treatment of
The chain and iting tackle carried out under)
Sub-rule (5) of rule 60 and by whom carried oul!
ist Applicable Due To Material Of Construction
Found in order. Functional Load Test Carried out.
|
1d Defects Noticed, Safe To Use At The SWL Capacity.
isual Inspection For Damage Should Be Carried Out
y User Before Use The Same.
8, Particulars of any defect found at any such),
Examination or after annealing and affecting |),
The safe working load and the step taken to |||
Remedy such defect. 7 "|
| gertfy that on,'28/06/2024, | thoroughly examined lifting machinelropeliting tackle and that
tne above salon fiero
(a
MANOJ. R. PANCHAL
| COMPETENT PERSON &
CHARTERED ENGINEER.AM1E0669.9
B. TECH (M), ASNT LEVEL II (UT)
il ob
Competency Certifeate No}: cuuoisHicPTIAN9seaT22010
AndDate || 710812020 To 08/08/2021
Issuedby |
NEXT INSPECTION & EXAMINATION RECOMMENDED ON 27/06/20224 sa,
S282 MARUTI ENTERPRISE “&®)
G1, GIDC ESTATE, PHASE-1, DLUE STAR ROAD, NARMADA NAGAR -392015, BHARUCH,
TPE INSPECTION, CERTIFICATION AND CALIBRATION OF EQUIPMENT AS PER FACTORIES ACT,
MOB.: 9825684100 _ Office no.: 9409205373 & 6141617327 _ E-mall: marutlepb@yahoo.in
‘Tost Certificato No.: HES- 126/24 Dato: 26/00/2021
FORM NO: 10
(Proscribod undor rulo 60)
Proscribod for roport of tho lifting machines, ropos an lifting tacklos
*ARTICULARS
Rogistration No:
NIC Code No: NA
4, Namo of Occuplor of Factory
Licanse No:
(As ivan in tho tieanss):
US, HOPE ENGINEERING SOLUTIONS
2, Addross of tho Factory :M.403, SILENT PARK CHS. LTD. MIRA BHAYANDER ROAD
ENEAR'GOLDEN NEST, BHAYANDER-EAST, THANE-401105,
3. Distinguishing Marks and description sufficient : Polyostor Wobbing Sllng, Maka: NA’,
To Identify tho Ifting machino, lifting tacklo otc. : SWL: 05 Ton, SR.NO: 004416,
+ Longth: 09 Mira, Color: ‘RED’ \
4. Dato when lifting machino was first used In tho : 2024 (ll
Factory |
hrough Visual faspoctiol, Physleal Obsorvation,
Functlonal Load Tost Carried Out A Por Standard
: By Mr, Manoj Panchal ont 28/06/2021
6. Date and number ofthe certificate relating to: By Mal\ufacturor H all
Any test and examination made undor sub-rule My || if
Ofrulo 60 togethor with the namo of the. \y Wa!
Person who issued the certificate afl ,
5. Dato of oach oxamination made undor section
29(1)(ay(l) and by whom Itwas carrlod out
\
7. Date of annealing or other heat treatment of
The chain and lifting tacklo carried out under)
Sub-rute (5) of rule 60 and by whom carried ot
{ot Applicable Due To Material Of Construction
ourid In order, Functional Load Tost Carried out.
i : WM
8. Particulars of any defect found at any such) :'No Defacts Noticed, Safo To Uso At Tho SWL Capacity.
Examination or attor annealing and afocting||): Vishal inapoctlon For Damage Should Be Caras Gav
The safe working load and the step taken to ||| By User Bofore Use Tho Samo.
Remedy such defect. i
| certify that on,|28/06/2024, 1 thoroughly oxamined liting machine/ropelliting tackle and that,
the above is a correct report of the result.
Ph Poe
MANOJ. R. PANCHAL
COMPETENT PERSON &
CHARTERED ENGINEER-AM180669.9,
B. TECH (M), ASNT LEVEL I (UT)
‘7ioer2020 To osniz021
Diroctor, Industrial Safoty & Hoaitt
+ Gularat Stato, Ahmadabad
NEXT INSPECTION & EXAMINATION RECOMMENDED ON 27/06/2022
Issuedby |rh. 1S
82 MARUTIENTERPRISE &
St, GIDC ESTATE, PHASE.1, BLUE STAR ROAD, NARMADA NAGAR -392015, BHARUCH.
, S21: SIPC ESTATE, PHASE.1, BLUE STAR ROAD, NARMADA NAGAR -392015, BHARUCH.
PI INSPECTION, CERTIFICATION AND CALIBRATION OF EQUIPMENT AS PER FACTORIES ACT.
825684100 Office no.: 9409205373 & 8141617127 E-mail: maruticpb@yahooin_
‘Test Certificate No,: HES- 127/21 Date: 28/06/2021
FORM NO: 10
(Prescribed under rule 60)
Prescribed for report ofthe lifting machines, ropes an lifting tackles
y
t
MO}
PARTICULARS
Registration No: License No:
NIG Code Ho: RA (As given inthe teense}:
4, Name of Occupler of Factory MIS, HOPE ENGINEERING SOLUTIONS.
hy
2. Address of the Factory 1-403, SILENT PARK CHS. LTD. MIRA BHAYANDER ROAD
3, Distinguishing Marks and description sufficient ; Polyester Webbing Sling, Make!
To identify the lifting machine, lifting tackle et
4. Date when liting machine was first used in the : 2024 1
Factory
5. Date of each examination made under section
‘hrough Visual inspection, Physical Observation,
29(1)(ail) and by whom it was carried out
Functional Load est Carried Out As Per Standard
: By Mr. Manoj Panchal on 28/06/2021
i i
6. Date and number of the certificate relating to
‘Any test and examination made under sub-rule
Of rule 60 together with the name of the
Person who issued the certificate (ih
ii
Date of annealing or other heat treatment of
The chain and ling tackle carried out unde
Suberule (5 of rule 60 and by whom cari 6
hi
No Defects Noticed. Safe To Use At The SWL Capacity.
isial Inspection For Damage Should Be Carried Out
y User Before Use The Same,
(ety
8. Particulars of any defect found at any such!
Examination or after annealing and affectir
The safe working load and the step taken to
Remedy such defect i
L erty that on|'28/06/2024, 1 thoroughly examined liting machinelropeiing tackle and that
a eee
MANOJ. R. PANCHAL
the above
Competency Certificate No
sand Dato or.020 To elotrazt COMPETENT PERSON &
Isoued by tr Indus Seely & CHARTERED ENGINEER-AN100669-9
{Guarat Stato, Ahmadabad __B.TECH (M), ASNT LEVELII (UT)
NEXT INSPECTION & EXAMINATION RECOMMENDED ON 27/06/2022v4. 0
aS MARUTI ENTERPRISE &®)
GAR -392015, BHARUCH.
‘Test Certificate No.: HES- 128/24 Dato: 28/06/2021,
FORM NO: 10
(Proseribod undor rulo 60)
Proscribed for roport of tho lifting machinos, ropos an lifting tacklos
PARTICULARS
Rogistration No: conse Not
[NIC Code No: NA {As olvon in tho eons}:
4. Name of Occupier of Factory MIS, HOPE ENGINEERING SOLUTIONS alli,
2. Address of the Factory +: M403, SILENT PARK CHS, LTD. MIRA BHAYANDER ROAD
| NEAR GOLDEN NEST, BHAYANDER FAST, THANESD1105
3. Distinguishing Marks and description ouffcient: Polyestor Wobbing Sting, Make!
To identify the lifting machino, lifting tackle otc, : SWL: 03 Ton, SR.NO: 593257,
+ Length: 06 Mire, Color: i
inh
4, Date when lifting machine was first used in the : 2024
Factory
5. Date of each examination made under section
29(1)(ayii) and by whom it was carried out
rough Visual inspection Physical Obsorvation,
Functional Load Test Carried Out As Por Standard
By Mr. Manoj Panchal on 28/06/2021
6. Date and number of the certificate relating to: By Mafiufacturer
‘Any test and examination made under sub-rule iT
Of rule 60 together with the name of the,
Porson who issued the certificate it!
7. Date of annealing or other heat treatment of; Not peels Due To Material OF Construction
The chain and lifting tackle carried out under: Found ln order, Functional Load Test Carried out.
Sub-ule (6) of rule 60 and by whom carried out Hh,
No Defects Noticed. Safe To Use At The SWL Capacity.
isial Inspection For Damage Should Be Carried Out
iy User Before Use The Same.
8. Particulars of any defect found/at any sud
Examination orateranneting and acting)
The cafe working load and tne stop taken
Remody such dafect, i
\.cortity that on, 28/06/2024, | thoroughly examined lifting machinelropeliting tackle and that
PL.
a1 (2
MANOJ. R. PANCHAL
COMPETENT PERSON &
rector, Industral Safety & Health CHARTERED ENGINEER-AM180669.9,
|) ppl! Fouarat state, anmadabad i B.TECH (M), ASNT LEVEL Il (UT)
And Date
Issued byRY
8 MARUTIENTERPRISE &
G4, GIDC ESTATE, PHASE-I, BLUE STAR ROAD, NARMADA NAGAR -392015, BHARUCH.
‘TPE INSPECTION, CERTIFICATION AND CALIBRATION OF EQUIPMENT AS PER FACTORIES AC
MOB.: 9825684100 _ Office no.: 9409205373 & 8141617127 E-mail: maruticpb@yahoo.
Test Certificate No.: HES- 129/24 Date: 28/06/2021
FORM NO: 10
(Prescribed under rule 60)
Prescribed for report of the lifting machines, ropes an lifting tackles
PARTICULARS
Roglstration No: License No:
NIC Code No: NAA (As oven inte ticns
‘1. Name of Occupier of Factory : MIS, HOPE ENGINEERING SOLUTIONS ‘| It,
MN,
7-403, SILENT PARK CHS. LTD. MIRA, anaVanteg ROAD
IEAR GOLDEN NEST, BHAYANDER EAST, THANE-404105
2, Address of the Factory
3. Distinguishing Marks and description sufficir
To Identify the lifting machine, lifting tackle et
eer Wettrg sina te
SWL: 05 Ton, SR.NO: 006493, |
ssivoieeenornee |
4, Date when lifting machine was first used in the : 2021
Factory
5. Dato of each exar
29(4)(a)il) and by whom itwas carried out
ion made under section: Through Vistalliaspectiohy Phy
Functional Load Test Carried Out As Per Standard
: By Mr. Manoj Panchal ‘on'28/06/2021
Date and number of the certificate relating to
‘Any test and examination made under sub-rule
Of rule 60 together with the name of the,
Person who issued the certificate i
7.Date of annealing or other heat treatment of, Nét Applicable Due To Material Of Construction
‘The chain and iting tackle earied out unde! Found ord, Functional Load Test Carried out.
Sub-rle (6) ofule 80 and by whom eared out) |)
lh,
qe
8. Particulars of any defect found'at any such |) Safe To Use At The SWL Capacity.
Examination or after annealing and affecting||) : Visual Inspection For Damage Should Be Carried Out
The safe working load and the step taken to ||; By User Before Use The Same.
Remedy such defect. 1 i
i Defects Notice
\,gertfy that on, '28/06/2021, | thoroughly examined lifting machinelropelifting tackle and that,
MRD
MANOJ. R. PANCHAL
Competency Cerificate No: GUSDISHICPT/A/02968472/2010
‘And Dato {07/08/2020 To o6/oer202t COMPETENT PERSON &
Issued by Y Director, Industral Safety & Health (CHARTERED ENGINEER-AM180669.9
ji): Gujarat State, Ahmadabad
NEXT INSPECTION & EXAMINATION RECOMMENDED ON 27/06/2022
B. TECH (M), ASNT LEVEL Il (UT)4.
2S MARUTI ENTERPRISE “&
G1, GIDC ESTATE, PHASE.!, BLUE STAR ROAD, NARMADA NAGAR -392015, BHARUCH,
TPL INSPECTION, CERTIFICATION AND CALIORATION OF EQUIPMENT AS PER FACTORIES ACT. |
MON.: 9825684100 Office no.: 9409205373 & 8141617127 E-mail: maruticpb@yahoo.in
Test Certificate No.: HES- 130/21 Date: 26/06/2021
FORM NO: 10
(Prescribed under rule 60)
Prescribed for report of tho lifting machines, ropes an lifting tackles
PARTICULARS,
Registration No conse No:
NIC Code No: KA, (As glvon in the tlean
4. Name of Occupier of Factory : MIS, HOPE ENGINEERING SOLUTIONS
2. Address of the Factory M403, SILENT PARK CHS. LTD. MIRA BHAYANDER ROAD
NEAR GOLDEN NEST, BHAVANDER-EAST, THANE-401105
3. Distinguishing Marks and description sufficient : Polyester Wobbing Sling, Make: 'N.A’,
To identity the lifting machine, lifting tackle ote, : SWL: 05 Ton, SR.NO: 006007,
+ Length: 06 Mtrs, Color: ‘RED 1
4. Date when lifting machine was first used In the : 2021
Factory
5. Date of each examination made undor section: Through Visual Inspection, Physical Observation,
29(1}(a)(i) and by whom it was carried out: & Functional Load Test Carried Out As Per Standard
: By Mr. Manoj Panchal on 28/06/2021
6. Date and number of the certificate rolating to: By Manufacturor
Any test and examination made under sub-rule
Of rule 60 together with the name of the
Person who Issued the certificate
7. Dato of annealing or other heat treatment of: Not Applicable Duo To Materlal Of Construction
Tho chain and lifting tackle carried out under : Found In order, Functional Load Test Carried out.
‘Sub-rule (5) of rule 60 and by whom earried out
8, Particulars of any defect found at any such. : No Defocts Noticed. Safo To Use At The SWL Capacity.
Examination or after annealing and affecting ||, : Visual Inspection For Damage Should Be Carried Out
The safe working load and the step taken to |: By User Before Use The Same,
Remedy such defect.
| certify that on, 28/06/2021, | thoroughly examined lifting machine/ropellifting tackle and that
PR be
Competency Certificate No, : GUSMDISHICPT/AV029584722010 MANOJ. R. PANCHAL
‘And Date 7108/2020 To 06/08/2021 COMPETENT PERSON &
tasved by Director, Industrial Safety & Health (CHARTERED ENGINEER-AM180669-9
Gujarat State, Ahmadabad 8. TECH (M), ASNT LEVEL II (UT)
NEXT INSPECTION & EXAMINATION RECOMMENDED ON 27/06/2022
Ins-004 ase:
2 MARUTI ENTERPRISE @®
St, GIDC ESTATE, PHASE-1, BLUE STAR ROAD, NARMADA NAGAR -392018, BHARUCH,
TPE INSPECTION, CERTIFICATION AND CALIBRATION OF EQUIPMENT AS Pit FACTORIES ACT,
MOB.: 9825684100 Office 1409205373 & 8 27 E-
94
Tost Certificate No.: HES- 131/24 Dato: 26/00/2021
FORM NO: 10
(Proscribod undor rule 60)
Prescribed for roport of the lifting machinos, ropos an lifting tacklos
PARTICULARS
Registration No: conse No:
NIG Code No: NA (As alven in tho teense)
1. Name of Occupier of Factory MIS, HOPE ENGINEERING SOLUTIONS.
2. Address of the Factory +: M-403, SILENT PARK CHS. LTD. MIRA BHAYANDER ROAD
{NEAR GOLDEN NEST, BHAYANDER-EAST, THANEWO(108
thet
8. Distinguishing Mars anl description suciont:Tple Spur Goat Chan Ploy Bloc, Mako:"N.A! |
To identify the ing machine, lifting tackle etc. : SWL: 10 Ton, Lift: 25 mtrs, SR.NO: 19060086,
# Lond Chaln Grado-80 with Load Hook.
4, Date when lifting machine was first used in the : 2021
Factory
55 Date of each examination made under section
Through Visual inspection, Physical Observation,
29(4)(a)(ii) and by whom it was carried out
8 Functional Load Test Carried Out As Per Standard
: By Mr. Manoj Panchal on 28/06/2021
6. Date and number of the certificate relating to: By Manufacturer
Any test and examination made under sub-rule hi
Of rule 60 together with the name of the 7 h,
Person who issued the certificate i
7. Date of annealing or other heat treatment of: Not Applicabie Due To Material Of Construction
The chain and lifting tackle carried out under): Found in order, Functional Load Tost Catriod out
Sub-rute (5) of rule 60 and by whom carried out
8. Particulars of any defect found at any such | :No Defects Noticed. Safe To Uso At The SWL Capacity,
Examination or after annealing and affecting, |), : Visual Inspection For Damage Should Be Carried Out
‘The safe working load and the step taken to |): By User Before Use The Same.
Remedy such defect.
| oertify that on, 28/06/2021, | thoroughly examined lifting machinelropelliting tackle and that
Mo Rome
MANOJ. R. PANCHAL
Competency Catifeate Ne: CUIDISHICPTIADa3sR4722010
Anddate | orive2020 To osos202t COMPETENT PERSON &
issvedby | rector, Industral Saey & Heath (CHARTERED ENGINEER-Attt00669.9
Gujarat State, Ahmadabad = LS B. TECH (M), ASNT LEVEL II (UT)
NEXT INSPECTION & EXAMINATION RECOMMENDED ON 27/06/2022