Professional Documents
Culture Documents
sunhydraulics.com/model/YRFN
This assembly provides 2 functions. It provides cross-port relief protection between ports M1 and M2. It also
provides anti-cavitation protection for ports M1 and M2.
TECHNICAL DATA
NOTES Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port
type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port
type/size specified.
For detailed information regarding the cartridges contained in this assembly, click on the models codes shown in the Included Components tab.
MATERIAL DESIGNATOR No modifier - inch, aluminum /S - Inch, Ductile Iron /M - Metric, Aluminum /T - Metric, Ductile Iron
INCLUDED COMPONENTS
TECHNICAL FEATURES
Back pressure on the tank port (port 2) is directly additive to the valve setting at a 1:1 ratio.
Will accept maximum pressure at port 2; suitable for use in cross port relief circuits.
Suitable for use in load holding applications.
This assembly provides protection for pumps and motors from pressure transients due to sudden load changes, especially variable displacement pumps, since the
displacement mechanism is sometimes too slow to catch these pressure transients.
The assembly's direct acting relief valves exhibit rapid response characteristics that minimize pressure overshoot and also provide low reseat leakage (less than 5
drops/min (0,3 cc/min) @ 85% of cracking pressure).
MANIFOLD FACES
FACE GRID
1 2 3 4
5 6 7 8
9 10 11 12
Face 5
Face 7
Face 10