Professional Documents
Culture Documents
y1 Ve1
Ved1
Vc1
L_X
X
Vc2
Ved2 y2
Ve2
for C25, fck= 20
fck = 20
fcd = 0.85*fck/gamma-c , where gamma-c = 1.5
fcd = 11.333333
fyk = 300
fyd = Fck/1.15
fyd = 260.86957 fctd= fctk/gamma-c for fck 25 , fctk= 1.5
ve2 0.8863636
x 1.95 m
y1 0.2 y2 0.2
The shear stress Vc carried by the concrete in members with out significant axial force shall be :
Vc=0.25*fctd*k1*k2
k1=(1+50*row) <=2.0
k2=1.6-d >=1 (d in meter ). For members where more than 50% of the bottom reinforcement is curtailed, k2 = 1
row = As/bw*d
As= the area of the tensile reinforcement anchored beyond the intersection of the steel and the line of a possible
45 degree crack starting from the edge of the section.
The net shear stress for which the stirrups are to be designed :
In order to prevent diagonal compression failure in the concrete, the shear resistance Vrd of a section
shall not be less than the applied shear force Vsd
Vrd=0.25*fcd*bw*d
Vrd= 374 KN
2- The traverse spacing of legs of stirrups shall not exceed d, or 800mm, whichever is the smaller.
Smax1= 220 Smax2= 220
S=Av*fyd / b*Vs ; Vs : the net shear stress for which the stirrups are designed.
For diameter 6
Scal1= 271.08475 271.0848 *** Scal2= 271.0848 271.0847516 ***
For diameter 8
Scal1= 484.07991 484.0799 *** Scal2= 484.0799 484.0799135 ***
For diameter 10
Scal1= 764.84626 764.8463 *** Scal2= 764.8463 764.8462634 ***
#6 220 #6 220
#8 220 #8 220
#10 220 #10 220