acceleration_enabled = False

adhesion_type = skirt
arcwelder_enable = True
arcwelder_g90_influences_extruder = True
jerk_enabled = False
layer_height_0 = 0.2
material_bed_temperature = 75.0
support_enable = True

acceleration_print = 1000.0
acceleration_travel = 3000.0
bottom_layers = 8
brim_width = 4.0
cool_fan_speed = 100
infill_pattern = lines
infill_sparse_density = 100
inset_direction = ='outside_in' if (True) else 'inside_out'
material_final_print_temperature = 220
material_initial_print_temperature = 220
material_print_temperature = 220
material_print_temperature_layer_0 = 235.0
meshfix_extensive_stitching = True
optimize_wall_printing_order = True
retraction_amount =0
retraction_speed = 25
speed_print = 60
support_brim_enable = True
support_line_width = 0.6
top_bottom_thickness = 1
top_layers = 8
wall_line_count = 4
z_seam_corner = z_seam_corner_inner
z_seam_type = sharpest_corner
z_seam_x = 111
поток% 90