Professional Documents
Culture Documents
User Guide
Cautions and Warnings
Regulatory Statements
i
Manufacturer’s Declaration of Conformance
North America
The equipment supplied with this guide conforms to UL 62368-1 and CSA C22.2 No. 62368-1.
Europe
The manufacturer declares that the equipment supplied is compliant with the European
Parliament and Council Directive on the restriction of the use of certain hazardous substances
in electrical and electronic equipment (2015/863/EU), the Low Voltage Directive
(2014/35/EU) and the essential requirements of the EMC directive (2014/30/EU),conforming
to the requirements of standards EN 55032 for emissions, EN 50130-4 for immunity, and EN
62368-1 for electrical equipment safety.
ii
Substance CAS
Product Part Name
Name Number
Solder paste(U1022)
Solder Wire(Q1018)
Solder paste(Dl097)
Wafer Passivation_Glass(D1097)
Smd Diode-Body(Dl029,D016)
HN300401xx Lead 7439-92-1
Solder paste(D1096,D1099,D1101,D1103)
WAFER(D1096,D1099,D1101,Dll03)
Body(D1071, D1077)
BUZZER_Ceramic wafer(BZl)
FAN_Brass metal
Buzzer(BZ1)
Solder paste(U1022, D1015, D1005,
D1006, D1008, D1009, D1011, D1012,
D101)
HN300802xx Wafer Passivation_Glass(D1015) Lead 9439-92-1
Smd Diode-Body(D1029)
WAFER(D1005, D1006, D1008, D1009,
D1011, D1012, D101)
Body(D1071, D1077)
Buzzer(BZ1)
Solder paste(U1022, D1015, D1005,
D1006, D1008, D1009, D1011, D1012,
D101)
HN301602xx Wafer Passivation_Glass(D1015) Lead 9439-92-1
Smd Diode-Body(D1029)
WAFER(D1005, D1006, D1008, D1009,
D1011, D1012, D101)
Body(D1071, D1077)
Important Safeguards
Read and keep these instructions.
• Please ensure that your installation area can safely support the weight of the unit.
• Do not drop the unit or subject it to physical shock.
• Avoid operating or storing the unit in extremely humid, dusty, hot/cold environments,
where the operating temperature is outside the recommended range of 14°F to 131° F (-
10°C to 55°C).
• Avoid operating the unit close to sources of powerful electromagnetic radiation, such as
radio or TV transmitters.
iii
• Ensure to connect the power cord to a socket-outlet with earthing connection, or
equivalent.
• The product is only to be connected to PoE network without routing to outside plant.
Safety Instructions
Before installing or operating the unit, read and follow all instructions. After installation,
retain the safety and operating instructions for future reference.
1. HEED WARNINGS - Adhere to all warnings on the unit and in the operating instructions.
2. INSTALLATION
• Install in accordance with the manufacturer’s instructions.
• Installation and servicing should be performed only by qualified and experienced
technicians to conform to all local codes and to maintain your warranty.
• Any wall or ceiling mounting of the product should follow the manufacturer’s
instructions and use a mounting kit approved or recommended by the manufacturer.
3. POWER SOURCES - This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power supplied to your
facility, consult your product dealer or local power company.
4. MOUNTING SYSTEM - Use only with a mounting system recommended by the
manufacturer or sold with the product.
5. ATTACHMENTS/ACCESSORIES - Do not use attachments/accessories not
recommended by the product manufacturer as they may result in the risk of fire, electric
shock, or injury to persons.
6. CLEANING - Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
7. SERVICING - Do not attempt to service this unit yourself. Refer all servicing to qualified
service personnel.
8. REPLACEMENT PARTS - When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or have the same
characteristics as the original part. Unauthorized substitutions may result in fire, electric
shock or other hazards. Using replacement parts or accessories other than the original
manufacturers may invalidate the warranty.
iv
In the event you have a problem with any Honeywell product, please call Customer Service for
assistance or to request a Return Merchandise Authorization (RMA) number.
Be sure to have the model number, serial number, and the nature of the problem available for
the technical service representative.
Prior authorization must be obtained for all returns, exchanges, or credits. Items shipped to
Honeywell without a clearly identified Return Merchandise Authorization (RMA) number
may be refused.
List of Symbols
The following is a list of symbols that might appear on the NVR.
Symbol Explanation
The WEEE symbol.
This symbol indicates that when the end-user wishes to discard this
product, it must be sent to separate collection facilities for recovery
and recycling. By separating this product from other household-
type waste, the volume of waste sent to incinerators or landfills will
be reduced, and thus natural resources will be conserved.
The UL compliance logo.
This logo indicates that the product has been tested and is listed by
the Underwriters Laboratories.
The FCC compliance logo.
This logo indicates that the product conforms to Federal
Communication’s Commission compliance standards.
The direct current symbol.
This symbol indicates that the power input/output for the product is
direct current.
The alternating current symbol.
This symbol indicates that the power input/output for the product is
alternating current.
The LDPE symbol.
This symbol indicates that this product is made of Low-Density
Polyethylene (LDPE).
The Direct Current symbol.
This symbol indicates that the product operates from a 12 V direct
current.
v
Compulsory Certification guidelines.
The Environment Friendly Use-period symbol.
This symbol indicates the length of time that this electronic product
can used without harming the environment.
The RCM Compliance symbol.
This symbol indicates that the product conforms with the Australian
RCM guidelines.
The TVU Lab symbol.
This symbol indicates that the product has been safety tested by
the TUV Lab.
The Direct Current symbol.
This Direct Current symbol indicates that the product operates
direct current.
vi
Regulatory Information
The regulatory information herein might vary according to the model you purchased. Some
information is only applicable for the country or region where the product is sold.
FCC Information
CAUTION
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
FCC conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause
undesired operation.
FCC compliance
This equipment has been tested and found to comply with the limits for a digital device,
pursuant to part 15 of the FCC Rules. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communication.
• For class A device, these limits are designed to provide reasonable protection against
harmful interference in a commercial environment. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
• For class B device, these limits are designed to provide reasonable protection against
harmful interference in a residential installation. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
vii
Table of Contents
About This Document ................................................................................................................................................ xv
Overview of Contents ....................................................................................................................................................... xv
Special Fonts and Symbols ........................................................................................................................................... xv
How to Use This Document .......................................................................................................................................... xv
1 Introduction .........................................................................................................................................................1
Overview of the Network Video Recorder ................................................................................................................. 1
Features of the Network Video Recorder ................................................................................................................. 1
Network Video Recorder Components ..................................................................................................................... 2
Using the On-screen Keyboard............................................................................................................................ 4
2 Getting Started ....................................................................................................................................................6
Connecting External Devices ........................................................................................................................................ 6
Devices Connection .................................................................................................................................................. 7
Starting and Shutting Down the NVR ....................................................................................................................... 8
Starting the NVR ......................................................................................................................................................... 8
Shutting Down/Reboot the NVR ......................................................................................................................... 8
Device Initialization ............................................................................................................................................................ 9
3 Viewing Live Video .......................................................................................................................................... 14
About Live View ..................................................................................................................................................................14
Live View Window ..............................................................................................................................................................15
Toolbars .................................................................................................................................................................................15
Shortcut Menu ...................................................................................................................................................................17
Working with the PTZ Control Panel (If Applicable) .........................................................................................18
Configuring PTZ Settings..............................................................................................................................................19
4 Recording Video ............................................................................................................................................... 20
Manual Recording ............................................................................................................................................................20
Scheduled Recording......................................................................................................................................................20
5 Playing Back and Search Videos ................................................................................................................ 22
Playing Recording Clips .................................................................................................................................................22
Searching Videos ..............................................................................................................................................................23
Timeline Bar .........................................................................................................................................................................25
Backing Up Video ..............................................................................................................................................................27
To Back Up Using the Playback Timeline Bar .............................................................................................27
To Back Up Using the Main Tool Bar ..............................................................................................................27
6 Settings ............................................................................................................................................................... 29
Setting-Camera-Management ..................................................................................................................................29
Change Password ....................................................................................................................................................29
Adding a Camera ......................................................................................................................................................31
Removing a Camera ................................................................................................................................................33
viii
Network .........................................................................................................................................................................34
Camera Position........................................................................................................................................................34
Setting-Camera-Media ..................................................................................................................................................35
Stream Management ..............................................................................................................................................35
Video ...............................................................................................................................................................................36
Audio ...............................................................................................................................................................................38
Setting-Camera-Schedule ...........................................................................................................................................38
Recording Options ...................................................................................................................................................38
Schedule .......................................................................................................................................................................39
Setting-Camera-Image ..................................................................................................................................................41
Display ...........................................................................................................................................................................41
Image Adjustment ....................................................................................................................................................41
Setting-Camera-Motion Detection ..........................................................................................................................42
Setting-Camera-PTZ settings .....................................................................................................................................43
Setting-Event-Event ........................................................................................................................................................44
Creating an Event .....................................................................................................................................................44
Removing an Event ..................................................................................................................................................50
Setting-Event-Email ........................................................................................................................................................50
Setting-System-Information .......................................................................................................................................50
Setting-System-Maintenance ....................................................................................................................................52
Setting-System-Display.................................................................................................................................................53
Setting-System-Log ........................................................................................................................................................55
Setting-User ........................................................................................................................................................................56
Creating a User ..........................................................................................................................................................58
Removing a User .......................................................................................................................................................59
Setting-Login/Logout ....................................................................................................................................................59
Setting-Storage .................................................................................................................................................................60
Creating a Volume ....................................................................................................................................................60
Verify ...............................................................................................................................................................................63
Settings-Network-IP ........................................................................................................................................................63
Settings-Network-Service .............................................................................................................................................64
Settings-Network-P2P ...................................................................................................................................................65
7 Management over a Web Console ............................................................................................................. 74
Before Getting Started....................................................................................................................................................75
Login .......................................................................................................................................................................................75
Live View Screen ................................................................................................................................................................76
Camera List .................................................................................................................................................................77
Layout ............................................................................................................................................................................78
Layout Contents .......................................................................................................................................................79
Time & Log out ...........................................................................................................................................................79
Live View Window .....................................................................................................................................................80
PTZ Panel......................................................................................................................................................................81
Event Panel..................................................................................................................................................................81
Search Recording Clips Screen ..................................................................................................................................83
Camera List .................................................................................................................................................................84
ix
Layout ............................................................................................................................................................................84
Playback Panel ..........................................................................................................................................................85
Event Panel..................................................................................................................................................................85
Settings Screen ..................................................................................................................................................................86
x
Figures
Figure 1-1 NVR Front Panel (HN300401xx) ......................................................................... 2
Figure 1-2 NVR Front Panel (HN300802xx/HN301602xx) ................................................... 3
Figure 1-3 NVR Back Panel (HN300401xx) ......................................................................... 3
Figure 1-4 NVR Back Panel (HN300802xx/HN301602xx) ................................................... 4
Figure 1-5 On-screen Keyboard ........................................................................................ 5
Figure 2-1 Devices Connection (HN300401xx).................................................................. 7
Figure 2-2 Devices Connection (HN300802xx/HN301602xx) ............................................ 7
Figure 2-3 Main Menu ......................................................................................................... 9
Figure 2-4 Shutdown ........................................................................................................... 9
Figure 2-5 Device Initialization –Password Setup ............................................................ 10
Figure 2-6 Device Initialization-Language and Time Zone ............................................ 10
Figure 2-7 Device Initialization-Search for Cameras ...................................................... 11
Figure 2-8 Device Initialization-Insert Cameras............................................................... 12
Figure 2-9 Device Initialization-Creating Disks ................................................................ 12
Figure 2-10 Live View Screen ........................................................................................... 13
Figure 3-1 Live View Screen ............................................................................................. 14
Figure 3-2 ........................................................................................................................... 15
Figure 3-3 Main Toolbar .................................................................................................... 15
Figure 3-4 Camera Toolbar .............................................................................................. 16
Figure 3-5 Shortcut Menu ................................................................................................. 17
Figure 3-6 PTZ Control Panel............................................................................................. 18
Figure 3-7 PTZ Settings ....................................................................................................... 19
Figure 4-1 Scheduled Recording ..................................................................................... 20
Figure 4-2 Scheduled Recording ..................................................................................... 21
Figure 5-1 Camera Toolbar-Playing Recording Clips ..................................................... 22
Figure 5-2 Credentials....................................................................................................... 23
Figure 5-3 Playback Interface.......................................................................................... 23
Figure 5-4 Credentials....................................................................................................... 24
Figure 5-5 Search .............................................................................................................. 24
Figure 5-6 Search and Playback ..................................................................................... 25
Figure 5-7 Timeline Bar ...................................................................................................... 25
Figure 5-8 Backup Clips .................................................................................................... 27
Figure 5-9 Backup Video .................................................................................................. 28
Figure 6-1 Management .................................................................................................. 30
Figure 6-2 Set New Password ........................................................................................... 30
Figure 6-3 Adding a Camera ........................................................................................... 31
Figure 6-4 Add A Camera by RTSP .................................................................................. 32
Figure 6-5 Removing a Camera ...................................................................................... 33
Figure 6-6 Confirm Message ............................................................................................ 33
Figure 6-7 Camera Network............................................................................................. 34
Figure 6-8 Edit Camera Position ....................................................................................... 35
Figure 6-9 Media-Stream Management-Live ................................................................. 35
Figure 6-10 Media-Stream Management-Recording .................................................... 36
Figure 6-11 Media-Video .................................................................................................. 37
xi
Figure 6-12 Audio .............................................................................................................. 38
Figure 6-13 Recording Options ........................................................................................ 39
Figure 6-14 Schedule ........................................................................................................ 40
Figure 6-15 Image-Display ................................................................................................ 41
Figure 6-16 Image-Adjustment ........................................................................................ 42
Figure 6-17 Motion Detection .......................................................................................... 43
Figure 6-18 Event............................................................................................................... 44
Figure 6-19 Create a New Event-Status .......................................................................... 44
Figure 6-20 Create a New Event-Trigger ......................................................................... 45
Figure 6-21 Create a New Event-Action ......................................................................... 45
Figure 6-22 Email Setup .................................................................................................... 46
Figure 6-23 Buzzer Setup ................................................................................................... 46
Figure 6-24 FTP Setup ........................................................................................................ 47
Figure 6-25 Camera Alarm Out Setup............................................................................. 48
Figure 6-26 Pan-tilt-zoom setup........................................................................................ 48
Figure 6-27 HTTP Setup ...................................................................................................... 49
Figure 6-28 System Alarm Out .......................................................................................... 49
Figure 6-29 Event Schedule .............................................................................................. 50
Figure 6-30 System-Information ........................................................................................ 51
Figure 6-31 Maintenance ................................................................................................. 52
Figure 6-32 Reboot ........................................................................................................... 53
Figure 6-33 Shutdown ....................................................................................................... 53
Figure 6-34 Display ............................................................................................................ 54
Figure 6-35 Layout............................................................................................................. 55
Figure 6-36 System Log-System ........................................................................................ 55
Figure 6-36 System Log- Recording ................................................................................. 56
Figure 6-36 System Log- User ............................................................................................ 56
Figure 6-36 System Log- Error............................................................................................ 56
Figure 6-37 User Page ....................................................................................................... 57
Figure 6-38 Change Password ......................................................................................... 57
Figure 6-39 Reset Security Questions ............................................................................... 58
Figure 6-40 Create a User................................................................................................. 59
Figure 6-41 Login/Logout ................................................................................................. 60
Figure 6-42 Setting-Storage .............................................................................................. 60
Figure 6-43 Select Disk ...................................................................................................... 61
Figure 6-44 Confirm........................................................................................................... 61
Figure 6-45 Creating Volume ........................................................................................... 61
Figure 6-46 Volume ........................................................................................................... 62
Figure 6-47 IP ..................................................................................................................... 63
Figure 6-48 Service ............................................................................................................ 64
Figure 6-49 P2P Setting ..................................................................................................... 65
Figure 7-1 WAN/LAN Connection (HN300401xx) ............................................................ 74
Figure 7-2 (HN300802xx/HN301602xx) .............................................................................. 74
Figure 7-3 Web Client Log in ............................................................................................ 75
Figure 7-4 Plugin Install...................................................................................................... 76
Figure 7-5 Live View Screen ............................................................................................. 76
Figure 7-6 Camera List ...................................................................................................... 77
Figure 7-7 Layout............................................................................................................... 78
xii
Figure 7-8 Live View Window ........................................................................................... 80
Figure 7-9 Information Bar ................................................................................................ 80
Figure 7-10 Tool Bar ........................................................................................................... 80
Figure 7-11 PTZ Panel ........................................................................................................ 81
Figure 7-12 Event Panel 2 ................................................................................................. 82
Figure 7-13 Event Clips...................................................................................................... 82
Figure 7-14 Search Recording Clips Screen.................................................................... 83
Figure 7-15 Calendar ........................................................................................................ 84
Figure 7-16 Layout............................................................................................................. 84
Figure 7-17 Playback Panel.............................................................................................. 85
Figure 7-18 Event Panel .................................................................................................... 86
Figure 7-19 Event Filter ...................................................................................................... 86
xiii
Tables
Table 1-1 NVR Front Panel Description .............................................................................. 3
Table 1-2 NVR Back Panel Description .............................................................................. 4
Table 3-1 Main Toolbar ..................................................................................................... 15
Table 3-2 Camera Toolbar ............................................................................................... 16
Table 3-3 PTZ Controls ....................................................................................................... 18
Table 5-1 Timeline Bar ....................................................................................................... 25
Table 6-1 Connection Type and Port .............................................................................. 32
Table 6-3 Video Quality .................................................................................................... 37
Table 6-4 Compatible USB Table ..................................................................................... 53
Table 7-1 Web Live View Screen ..................................................................................... 76
Table 7-2 Layout Contents ............................................................................................... 79
Table 7-3 Information Bar ................................................................................................. 80
Table 7-4 Tool Bar .............................................................................................................. 80
Table 7-5 Search Recording Clips Screen....................................................................... 83
Table 7-6 Layout ............................................................................................................... 84
Table 7-7 Playback Panel ................................................................................................ 85
xiv
About This Document
This document introduces the Honeywell 30 Series Network Video Recorder. It explains how to
operate the Network Video Recorder.
This document is intended for installers and users.
Overview of Contents
This document contains the following chapters:
• Chapter 1, Introduction, describes the features, front and rear panel layout of the NVR.
• Chapter 2, Getting Started, describes how to connect the NVR and log on to its user
interface.
• Chapter 3, Viewing Live Video, describes the NVR’s real-time monitoring mode and
associated NVR operations, including controlling a PTZ camera (if connected).
• Chapter 4, Recording Video, describes how to manually record a video clip and how to set
up automatic recording.
• Chapter 5, Playing Back and Search Videos, describes how to search for and play back
recorded video, and how to save recorded files to an external storage device.
• Chapter 6, Settings, describes how to configure NVR settings.
• Chapter 7, Management over a Web Console, describes how to operate the NVR’s through
web client.
xv
• This product is subject to updates or changes without prior notice.
• Please familiarize yourself with this manual before operation and ensure its accessibility
for future use.
• The manual has been reviewed and its accuracy is guaranteed. If there is any uncertainty
or controversy, please refer to the final explanation of Honeywell. Honeywell does not take
any responsibility for any consequences caused by the misunderstanding of the manual or
incorrect operations by the user.
xvi
Introduction
1 Introduction
This chapter contains the following sections:
• Overview of the Network Video Recorder on page 1.
• Features of the Network Video Recorder on page 1.
• Network Video Recorder Components on page 2.
1
30 Series Network Video Recorder User Guide
Network Monitor
• The NVR supports the transmission of audio/video data that is compressed by an IP
camera, which is then decoded for display. The delay time is more than 500 ms (sufficient
network bandwidth support is required).
• Compatible to broadcast audio/video with the following transmission protocols: HTTP,
HTTPS, TCP, RTP/RTCP.
• Transmits some alarm data or alarm information through SMTP.
• Supports Internet access through the WAN.
Window Split
Video compression plus a digital process allows the NVR to split the monitor screen to show
up to 4 video channels (HN300401xx)/8 video channels (HN300802xx)/16 video channels
(HN301602xx) at the same time.
Recording
Supports a schedule for recording. The recorded files can be saved in the HDD. You can
search and view the recorded video that is stored locally or through the Internet connection.
Backup
Supports backing up video to a USB device on local side or to PC client on web side.
Network Management
• Supports NVR configuration and management through the Internet.
• Supports device management through the Internet.
Auxiliary
• Supports viewing real-time system resources information and running statistics display.
• Supports log file.
• Supports local GUI output and shortcut menu operation with a computer mouse and
keyboard.
• Supports setting up the configuration of a camera.
2
Introduction
4. USB port
(HN300802xx/HN301602xx)
3
30 Series Network Video Recorder User Guide
1. To display the on-screen keyboard, click on the main toolbar (see Figure 3-3 Main
Toolbar) in live view screen to go to the settings screen.
4
Introduction
5
30 Series Network Video Recorder User Guide
2 Getting Started
This chapter contains the following sections:
• Connecting External Devices on page 6.
• Starting and Shutting Down the NVR on page 8.
• Device Initialization on page 9.
6
Getting Started
Devices Connection
The following diagram shows a typical NVR connection:
7
30 Series Network Video Recorder User Guide
1. In live view screen, click (Main Menu) on the main toolbar (see Figure 3-3 Main
Toolbar).
8
Getting Started
Device Initialization
When the NVR has booted up, set password before launching NVR.
9
30 Series Network Video Recorder User Guide
1. Enter the current password “1234” and set the new password according to the password
requirements. The default username is admin.
You can use the USB mouse to input the password. Click to expand the on-screen
keyboard to switch the input mode between numbers and English letters; click to
change between lowercase and uppercase.
2. When the password setup is completed, click Apply and the following window is displayed:
10
Getting Started
Select the language and time zone from the dropdown list and set date and time.
3. Click Continue and cameras that have been searched within the LAN will be listed:
• This step will not be stayed for long if the cameras are accessed by
Note default password.
• 30 series Camera FW version is V19.12.13 or later.
11
30 Series Network Video Recorder User Guide
12
Getting Started
13
30 Series Network Video Recorder User Guide
14
Viewing Live Video
Toolbars
There are two toolbars (the main toolbar and the camera toolbar) that appear in front of the
live view screen. Make sure a mouse is attached to your NVR. Move your mouse cursor on live
view screen, and the Main Toolbar will appear. Click to select a view window, the Camera
Toolbar will appear. Toolbars can be dragged to desirable place using mouse.
To hide the toolbar, right click the mouse on the window and deselect “Show toolbar”.
15
30 Series Network Video Recorder User Guide
16
Viewing Live Video
Shortcut Menu
The shortcut menu is displayed by right-clicking on the selected window.
17
30 Series Network Video Recorder User Guide
Name Function
PTZ control Click and drag the circle in the center towards the direction
you wish to move to.
Click the Focus near and Focus far buttons to adjust camera
Focus
focus.
Use the Zoom in and Zoom out buttons to adjust the camera's
Zoom
zoom ratio.
18
Viewing Live Video
Go to PTZ settings:
• Click , and enter a name for the position. Press Enter to proceed.
• Repeat the configuration to create more positions.
• Click Apply for the configuration to take effect.
Note The PTZ panel can vary with different PTZ cameras.
19
30 Series Network Video Recorder User Guide
4 Recording Video
This chapter contains the following sections:
• Manual Recording on page 20.
• Scheduled Recording on page 20.
Manual Recording
In live view window, select a window and click on the camera tool bar to start a manual
recording. The manual recording icon will appear on the window. Click again to
stop the manual recording.
Scheduled Recording
By default, all video feeds from cameras are recorded at all time with the icon appeared on
the window. You can modify the recording task using the schedule tool:
Go to Schedule Schedule.
20
Recording Video
a) Select a condition checkbox, and then select the All day, Work hour, Off duty,
Working day, Weekend options to apply a time selection.
Make sure to deselect the “All day” option before selecting the “Work hour”,
Note
“Off duty”, “Working day” and “Weekend” options.
b) Repeat the process on individual cameras or click Apply to all cameras at the right
bottom if the schedule can apply to all cameras.
4. When the configuration is completed, click Apply.
21
30 Series Network Video Recorder User Guide
1. Select a camera and click on the camera toolbar and select a period you want to
playback for.
2. A confirm window is displayed: (If left unattended for a period, system will automatically
log out)
22
Playing Back and Search Videos
3. Enter the username and password. Click Log in and the playback interface is displayed:
The playback begins from the point in time you selected, e.g., 30 seconds ago. This function
allows you to quickly review what has just happened.
Searching Videos
1. Click on the main toolbar and a confirm window is displayed: (If left unattended for
a period, system will automatically log out)
23
30 Series Network Video Recorder User Guide
2. Enter the username and password. Click Log in and the search interface is displayed:
3. Select cameras (up to 4 cameras) in the camera list and the days with recorded clips will
be highlighted in blue. The date highlighted in green indicates today.
4. Click to set up the layout when several cameras are played back simultaneously.
5. Double-click on a day to begin playback and search.
24
Playing Back and Search Videos
6. Click the camera again to deselect it and select another one to playback if needed.
Timeline Bar
By default, the playback starts from the beginning of a day's recording. While playing the
recorded video, click on the timeline to replay a point in time in the video.
Buttons Description
25
30 Series Network Video Recorder User Guide
Play back from 10 seconds ago. (Suggest disabling the Dynamic Intra
Frame period (DIF) setting ( Media Video) when perform this
function as the time interval may not be 10 seconds while Dynamic Intra
Frame period (DIF) is enabled.)
Play back from 10 seconds after. (Suggest disabling the Dynamic Intra
Frame period (DIF) setting ( Media Video) when perform this
function as the time interval may not be 10 seconds while Dynamic Intra
Frame period (DIF) is enabled.)
Play backwards
Play
This button is available after you paused a playback.
Pause
Each click on it speeds up by 2x. The fastest speed is 16 times. The current
playback status is indicated on the screen.
Digital zoom
This applies when a camera is displaying the full of its field of view. You can
use the Digital zoom function to zoom in on the field of view.
Export clips
Use this function to select a span of time you want to export to other
medias.
26
Playing Back and Search Videos
Backing Up Video
6. Click .
27
30 Series Network Video Recorder User Guide
28
Settings
6 Settings
This chapter contains the following sections:
• Setting-Camera-Management on page 29.
• Setting-Camera-Media on page 35.
• Setting-Camera-Schedule on page 38
• Setting-Camera-Image on page 41.
• Setting-Camera-Motion Detection on page 42.
• Setting-Camera-PTZ settings on page 43.
• Setting-Event-Event on page 44.
• Setting-Event-Email on page 50.
• Setting-System-Information on page 50.
• Setting-System-Maintenance on page 52.
• Setting-System-Display on page 53.
• Setting-System-Log on page 55.
• Setting-User on page 56.
• Setting-Login/Logout on page 59.
• Setting-Storage on page 60.
• Setting-Network on page 63.
• Setting-MAXPRO Cloud on page 65.
Setting-Camera-Management
Change Password
Go to ManagementAdd/edit.
29
30 Series Network Video Recorder User Guide
Camera’s password can only be changed at local client for new password
Note
and NVR password setting to the cameras, not available at web client.
30
Settings
Adding a Camera
Go to ManagementAdd/edit.
3. Click Add and the camera will be placed at an unoccupied position. You may also expand
the menu on the side of the Add button to select a position number.
When a camera is added, it should appear on the graphical placement below.
4. Click Apply after you added cameras.
31
30 Series Network Video Recorder User Guide
32
Settings
Removing a Camera
Go to ManagementAdd/edit.
2. Mouse over to the camera you want to remove, and its entry will display the Remove
message.
3. Click the Remove message and a confirm window prompted:
33
30 Series Network Video Recorder User Guide
Network
Go to ManagementNetwork.
Here you can configure the network type, IP address, and the connection ports for video
streaming.
You can select DHCP as the method for cameras to acquire IP addresses, or you can manually
configure static IPs for a single or all cameras.
It is usually not necessary to change port numbers for the HTTP and RTSP ports unless there
is a conflict in your network environment.
Camera Position
Go to ManagementCamera position.
34
Settings
To change a camera's position on the Liveview layout, click and drag a camera to a desired
position. Click Apply for the configuration change to take effect. The position screen displays
the current layout on the Liveview screen.
Setting-Camera-Media
Stream Management
Click Live and you can manually select High resolution, Medium resolution, or Low
resolution streams from the pre-configured video streams of a camera for live view.
35
30 Series Network Video Recorder User Guide
Click Recording and you can use these preset conditions to configure the resolution, image
quality, frame rate, and the bandwidth consumption of the recording stream on this window.
Select MJPEG as codec and the maximum size of the frame size is
Note
1920*1920.
Video
Go to Media Video.
36
Settings
The Video window allows you to configure all video streams (the no. of stream available can be
different for different models). You can configure the following:
Codec: video compression codec in H.264, H265 or MJPEG.
Frame size: video resolution.
Maximum frame rate: the highest frame rate.
Intra frame period: how often an I-frame will be inserted into the video stream.
Smart Stream II: some newer camera models come with Smart Stream features.
• Dynamic intra frame period: High quality motion codecs, such as H.265, utilize the
redundancies between video frames to deliver video streams at a balance of quality and
bit rate. The encoding parameters are summarized and illustrated below. The I-frames are
completely self-referential and they are largest in size. The P-frames are predicted
frames. The encoder refers to the previous I- or P-frames for redundant image
information.
• Smart FPS: In a static scene, the algorithm puts old frames in queue when no motions
occur in scene. When motions occur, the encoding returns to normal to deliver real-time
streaming.
By queuing the old frames from a static scene, both the computing efforts and the size of
P frames are reduced. It is beneficial for keeping up with the frame rate requirements.
A default frame difference threshold, 1%, is embedded in firmware for returning from
Smart FPS to normal encoding when motions occur.
• Smart Codec: Smart codec effectively reduces the quality of the whole or the non-
interested areas on a screen and therefore reduces the bandwidth consumed.
Video quality: you may either select Constant bit rate or Fixed quality as the defining rules
for video transmission:
Constant bit rate Places a packet size threshold on video frames; This
guarantees the frame rate per second performance, yet
37
30 Series Network Video Recorder User Guide
Audio
Go to Media Audio.
The Audio window allows you to configure all audio codec, sampling rate, and Microphone
input gains. Depending on design of the camera models, some codecs may not be available.
Also, there are cameras that come without embedded microphones.
Setting-Camera-Schedule
Recording Options
Go to ScheduleRecording options.
38
Settings
Schedule
Go to Schedule Schedule.
39
30 Series Network Video Recorder User Guide
By default, all video feeds from cameras are recorded at all time
Note
(highlighted in blue).
You can modify the recording task using the schedule tool:
1. Select a camera and click to select a recording condition's checkbox–Continuous
recording, Event recording and Clear (no recording).
2. Click and drag on the cells on the time table. For example, to stop the recording during a
period, select the Clear checkbox and move the cursor across the time table. The
minimum unit on the table is half an hour.
3. You may also use the scheduler tool on the right to facilitate the process.
a. Select a condition checkbox, and then select the All day, Work hour, Off duty,
Working day, Weekend options to apply a time selection.
b. Repeat the process on individual cameras or select the Apply to all cameras if the
schedule can apply to all cameras.
4. When the configuration is completed, click Apply.
40
Settings
Setting-Camera-Image
Display
Go to Image Display.
The Display window allows users to tune the image display options:
Video name: The video name is displayed on the title bar that is displayed on each view cell.
The screen shot below shows a name as "Speed dome."
Video name and timestamp: Default is enabled. If enabled, the video name and time is
displayed on the view cell.
Video Standard: Depending on power line frequency of your country, select a matching
option, NTSC 60Hz or PAL 50Hz, to avoid image flickering due to unmatched electricity.
Video orientation: Select these options if the image from camera needs to be vertically or
horizontally flipped.
Click Restore to poll for the original settings or click Apply to finish the process.
Image Adjustment
41
30 Series Network Video Recorder User Guide
The Image adjustment window allows users to tune the basics about image display options:
• Color
• Brightness
• Saturation
• Contrast
• Sharpness
High TV line, Gamma curve, low light compensation, etc. The rest of the options depend on
the lens and image sensor type of each individual camera. Therefore, the options here can
vary. For unique options coming with each individual camera, please refer to their User
Manuals for more information.
Click Restore to poll for the original settings or click Apply to finish the process. For features
common among cameras, you may select the Apply to all cameras checkbox.
Setting-Camera-Motion Detection
The Motion detection page allows you to set up a motion detection area.
Go to Motion detection.
42
Settings
To have recordings on event trigger, you need to set up event schedule and
Note create regular events at first. Please see Schedule on page 39 and Creating
an Event on page 44.
Setting-Camera-PTZ settings
Please see Configuring PTZ Settings on page 19.
43
30 Series Network Video Recorder User Guide
Setting-Event-Event
The events reported from individual cameras’ alarm in /alarm out, and motion detection can
be accommodated in the NVR system's alarm settings. These events will then be reported or
trigger corresponding actions as follows:
• Record the video by the time the event is triggered.
• Reporting events via Email with snapshots attached.
• Sound the onboard buzzer.
• Triggering video snapshot and text message by the occurrences of events to an FTP site.
• Triggering a camera's alarm out.
• Triggering a PTZ camera(s) for its lens to move to a preset position.
• Sending notification to the HVMV for MS Window software.
• Sending a full screen live view on the connected monitor.
When an alarm is triggered, a message prompt will appear on the Liveview or any
configuration window.
Creating an Event
Go to Event.
44
Settings
45
30 Series Network Video Recorder User Guide
To configure Email notification, enter valid Email addresses as the Sender and Recipient
addresses, an Email subject, and the SMTP server address through which the Email will
be delivered. If you need to log in to SMTP server to deliver an Email, enter the User name
and password for access to that account.
Buzzer - The buzzer is sounded on the occurrence of the event. The buzzer tones are
categorized into: Major (1 long 2 shorts, 1 sec interval), Normal (3 shorts, 2 sec interval)
and Minor (2 shorts, 2 sec interval) depending on the importance of an event. Select a
Buzzer modulation from the drop-down list.
A long tone has a duration of 1 second, while a short tone 0.5 second. A very short tone
lasts only for 0.1 second.
Select how many times the buzzer tones will be repeated on the occurrence of an event.
If events of different importance are issued at the same time, e.g., one major and one
minor event, system will ignore the minor event and sound the buzzer tone for the major
46
Settings
event only. The buzzer can be sounded either by the Alarm actions or the system events. If
Alarm actions and system service events occur at the time, Alarm actions have the higher
priority.
If multiple Alarm actions occur, the currently-sounded events can be depleted by the new
event.
There are conditions that the system will sound the buzzer, and the conditions are not
configurable.
• Disk failure - missing drives or SMART detected failures.
• Disk full - the free space is too small for recording tasks.
FTP–Snapshots from specified cameras can be uploaded to an FTP site on the
occurrence of an event. Enter the FTP site address in the dotted-decimal notation, e.g.,
159.22.151.20. Enter the login name and password for the user account. You can enter a
directory name you prefer on the FTP site. The server port default is 21, a different number
between 1025 and 65535 can also be assigned.
The snapshot thus delivered has a size of 320x240 pixels. If authentication is not applied,
login will proceed using the [anonymous] account. The file names of the snapshot jpeg.
files will look like this: [MAC]_[DATE]_[TIME]_[CAMERA_INDEX].jpg - If similar files
already exist, an additional index number will be added to the end of file name.
Camera Alarm Out - A triggered alarm triggers a camera's alarm out, e.g., an alarm siren.
47
30 Series Network Video Recorder User Guide
Pan-tilt-zoom - A PTZ capable camera can move its lens to the preset position in case of
a triggered alarm. For example, a triggered sensor may indicate an area of interest has
been intruded, and a camera's field of view should be moved to cover that area. The
precondition is that you properly set up preset positions on your PTZ cameras using a
local or a web console.
HTTP - Select to send the media files to an HTTP server when a trigger is activated.
48
Settings
System Alarm Out - A triggered alarm can be used to toggle the NVR's alarm out, e.g., to
sound an alarm siren.
Send to HVMV–An event message will display on your HVMV mobile app.
For using the push notification function of HVMV mobile app, you need
Note
to select send to HVMV for Action type in NVR event configuration.
49
30 Series Network Video Recorder User Guide
6. Click and drag the mouse to activate or de-activate alarm triggers throughout a specific
timeline.
7. Click Finish to end the configuration.
8. Repeat the process above to create more alarms according to the needs in your
surveillance deployment.
Removing an Event
Go to Event.
Setting-Event-Email
This page provides an interface where you can configure the connection to a Mail server. via
the Mail server, the system can deliver Emails containing system alarm messages to multiple
receivers. A reachable Mail server and Email accounts must be provided before you can apply
the settings.
Go to Email.
The configuration options are identical to those found in the Email configuration in Settings -
Event window. See Email Setup on page 46.
Setting-System-Information
Go to Information.
50
Settings
51
30 Series Network Video Recorder User Guide
Setting-System-Maintenance
Go to Maintenance.
• Restore–If you have a previously-saved profile, you can restore your previous
configuration. Click Restore. A file location window will prompt. Locate the backup file and
52
Settings
click Open. The Restore process will take several minutes to complete, and system
operation will be interrupted during the process.
• Reboot – Click the button to reboot NVR.
Brand Specification
Setting-System-Display
Go to Display.
53
30 Series Network Video Recorder User Guide
On this page, you can configure the system to consecutively display (rotate) cameras' view
cells on the Liveview window. For example, if you have 8 cameras in 2 2x2 layouts, the rotation
can let you see the live views of all cameras by every few seconds.
After checking Preload next page, the next page will be preloaded with smooth rotation and
the loading status will be invisible in live view.
You can check the video for your reference.
54
Settings
Setting-System-Log
Go to Log.
System logs are categorized as System, Recording, User, and Error. You can search for past
logs in each category window by selecting a range of time and clicking Search
55
30 Series Network Video Recorder User Guide
Setting-User
Go to User.
56
Settings
The User page allows you to create more users, to change user password, reset security
question and place limitations on users' privileges and administration rights. Up to 16 users
can be created, including the default administrator.
57
30 Series Network Video Recorder User Guide
By default, there are two user groups: Administrator and Regular user.
• The administrator users can access all cameras recruited in the configuration.
• The regular users can be configured to have access to some or all cameras and the
regular users can use only the live view and playback features for the assigned cameras.
The regular users cannot access the Settings window, meaning that regular users cannot
add or remove cameras, make changes to alarm, network, and all other system settings.
When users try to access the Settings window, the login window prohibits regular users to
log in.
The system blocks out the video feeds from users who are denied of the access to particular
cameras. The alarms and the alarm-triggered recordings from those cameras will also be
inaccessible for unauthorized users.
The default name and password for administrator group are admin and
Note admin. It is highly recommended to change the default password to
prevent unauthorized access to the system.
Creating a User
58
Settings
2. Enter username, password and select a group from the dropdown menu.
3. Click Apply to close the configuration window. Repeat the process to create more users.
Removing a User
Setting-Login/Logout
Go to Login / Logout.
59
30 Series Network Video Recorder User Guide
Setting-Storage
Creating a Volume
Before creating the volume, make sure the HDDs have been properly installed.
Go to Storage.
60
Settings
2. Click a disk that you want to use and click Create. A confirm message prompted as below:
61
30 Series Network Video Recorder User Guide
Repeat the above steps to create a new volume when you installed another disk.
The storage page displays the volume information including physical position, total capacity,
used and free space, and associated commands such as Format and Delete. Since each
volume contains only 1 hard drive, detailed information about the hard drive is also displayed
on this page.
You can format an existing storage volume in situations such as when you need to re-deploy
the system elsewhere.
Disk Information
Model family: The brand name of the HDD manufacturer.
Device model: The disk model name.
Serial number: Serial number assigned to the disk drive.
Firmware version: The version of firmware running on this disk drive.
Last check: The bad block check or S.M.A.R.T. test previously executed on this drive.
Status: S.M.A.R.T. status polled from the disk drive. This is not the results from a manually-
executed S.M.A.R.T. test.
Attribute name: The various attributes can vary from different HDD manufacturers. Value:
Value for the currently selected attribute.
Value: The detected parameters for that attribute.
Worst: Worst value acquired for that attribute.
Threshold: A predefined threshold or triggering value. The threshold below which the
normalized value will be considered exceeding specifications.
Status: The judgement made to deem the current reading as OK or failed.
62
Settings
Verify
Click Verify on Figure 6-42 to check the disk status. Three types of check disk actions can be
initiated through this button.
Bad Block: Performs read/write test to drive sectors to locate bad blocks. This action may take
several hours to complete.
Fast S.M.A.R.T.: Tests the electronic and mechanical performance and disk read performance,
including those on disk buffer, read head, seek time, and integrity of drive sectors. The short
test is performed on a small section of disk platters, and takes about 2 minutes to complete.
S.M.A.R.T.: The long test is more thoroughly and is performed to all drive sectors. The actual
completion time depends on drive sizes and the attributes put to test.
The Check disk functions mentioned above, when performed during active I/Os, can consume
system resources and cause dropped frames with the recording tasks.
Setting-Network
Settings-Network-IP
Go to IP.
Figure 6-51 IP
DHCP: Default is selected, the server obtains an available dynamic IP address assigned by the
DHCP server each time the system is connected to the LAN.
63
30 Series Network Video Recorder User Guide
Manual setup: Select this option to manually assign a static IP address to the NVR. Enter the
Static IP, Subnet mask, Default router, and Primary DNS provided by your ISP.
Mac: This is the Mac address.
Subnet mask: This is used to determine if the destination is in the same subnet. The default
value is “255.255.255.0”.
Gateway: This is the default router used to forward frames to destinations in a different
subnet. Invalid router setting will fail the transmission to destinations in different subnet.
DNS Server 1: The primary domain name server that translates hostnames into IP addresses.
DNS Server 2: Secondary domain name server that backups the Primary DNS.
POE DHCP: This is the POE network segment.
When finished with the network settings, click Apply.
Settings-Network-Service
Go to Service.
By default, the NVR service and video streaming are accessed via HTTP port 80 and RTSP port
554. You can designate a different port number if the need arises. Usually it is not necessary
to change these ports. HTTPS encrypted connection is enabled by default.
64
Settings
Settings-Network-P2P
You can easily connect to the unit using a mobile device with the HVMV APP using the P2P
screen. To use this option, you will need the HVMV APP downloaded, installed, and have
registered/created an account. When the APP is setup, go to Device Management P2P and
use the camera to view the QR code on the P2P screen. The device’s information and
connection will automatically be downloaded to the APP and you can now connect to the NVR
using your mobile device.
Go to P2P.
Check the check box to enable this option.
Setting-MAXPRO Cloud
The MAXPRO Cloud (MPC) enables you to configure, manage and monitor your Video surveillance,
access control and Intrusion system through a single user interface from anywhere and anytime.
1. Login to the 30 Series NVR and go to IP to get the MAC ID of the 30 Series
NVR.
2. Access the MAXPRO Cloud sign in page (https://www.mymaxprocloud.com/MPC/Signin)
from your web browser (Google Chrome version 63 or later).
3. Enter the MAXPRO customer user name and password and click sign in.
65
30 Series Network Video Recorder User Guide
7. To add the 30 Series NVR, select Video Recorder as the Controller Type.
8. Enter the MAC ID of the 30 Series NVR.
9. Enter the Controller Name.
10. Select the TimeZone. This Time Zone will be pushed to the NVR.
66
Settings
11. Click Add Controller. The success message indicates that the NVR is added successfully.
Enable MAXPRO Cloud integration: Select this checkbox to enable integration with MAXPRO
Cloud.
MAXPRO Cloud registration URL: The MAXPRO Cloud registration URL.
67
30 Series Network Video Recorder User Guide
MAXPRO Cloud port number: The HTTPS port number for the MAXPRO Cloud web URL.
2. Click Save.
The device status is ONLINE, and the Settings, I/O, and Storage
Note
tabs are displayed on the controller page.
Settings: The Settings tab displays the device settings. Click the edit icon to enable editing.
Most of the device settings do not allow update.
• Check the IP address, port, Subnet Mask, Gateway, DNS server, Firmware version, MAC
address, and other details.
• Changing the Recorder Name is allowed, but the recorder name setting is applicable
only on the MPC side.
• You can add a note in the Notes box which is applicable only for the cloud.
• The Reboot button can be used to manually reboot the NVR.
• The Sync Device button (primarily used for debug purpose only) can be used to
synchronize some settings from the NVR to the MPC.
68
Settings
I/O: The I/O tab displays the device I/O settings. Only the on-board I/O (i.e., USB I/O) is
supported and network I/O is not supported. Click the edit icon to enable editing.
• You can change the Name of a Inputs and can change the Level to NO (Normally Open)
or NC (Normally Closed).
• The output behavior is set using Output. You can change the Output name, Trigger
source (i.e., the input source triggering the output), and VMD (i.e., the camera motion
triggering the output). l
• You can manually trigger the output by clicking Test Output on MPC.
Click Save to save the changes on MAXPRO Cloud.
Storage: Displays the total capacity of the hard disks and the used space.
5. Click Save.
4. Select a camera and click edit to change the camera settings. Apply the Configure tab
settings.
Enable: This setting can be used to enable / disable a camera. If you disable a camera on
MPC, the camera is deleted on 30 Series NVR, too.
69
30 Series Network Video Recorder User Guide
5. Click the play button to perform live preview for the camera. Cameras with MFZ function
support focus, zoom, and autofocus. Click the stop button (at the bottom-left) to stop the
live preview.
Recording Clip Duration: Set the Pre Event and Post Event recording duration in seconds for
a event trigger, motion trigger, user driven, or rule driven Recording. The clip length will
include Pre Event and the Post Event. Pre Event and Post Event can be set to a maximum of
70
Settings
one hour, but the maximum clip length is limited to 90 seconds to save the cloud storage
space.
Recording Settings: The Recording Settings are mapped to the event stream.
Live Settings: The Live Settings are mapped to the analytical stream on 30 Series NVR.
4. You can perform user driven recording. Only the channels with live view can be recorded.
Record All: to manually record for multiple cameras
71
30 Series Network Video Recorder User Guide
Upgrade Firmware
MPC allows the user to upgrade the firmware of 30 Series NVR.
To upgrade the firmware
Check Alarms
Alarms notify the occurrence of alarms and events selected during setup that occur in any of
the connected systems to the operators. Alarms require further action by the operator. Some
of the typical alarms are: Input, Motion, Hard disk error, Video Loss, Video OK, Video
Disconnect, Camera Disconnect.
Alarms with no severity are events. Every event and alarm is sent as a notification.
To view the Alarms page
72
Settings
The upper-right corner of the Alarms tab displays the following options:
Filter: The filter option enables to filter through the list of alarms based on:
• Entities: Controllers, Cameras, Doors, and Rules.
• Time: View Archived Events, Today, Yesterday, and Custom.
• Events: Access, Video and Intrusion.
• Sites: You can select and search the site.
Actions: Enables you to perform the following for the alarms that appear in the Alarm
window.
• Freeze Alarm Stream: Stop receiving new or unacknowledged alarms in the new
window. You can click this command again to start receiving the alarms. This feature
is useful when the Alarm window contains many unacknowledged alarms and it
becomes difficult to mange them. You can stop receiving the alarms momentarily
and start receiving again when needed.
• Acknowledge: Acknowledge the selected alarm. It enables you to acknowledge an
alarm to accept that the necessary response action is being taken.
• Archive: Clear the alarms when they are acknowledged.
73
30 Series Network Video Recorder User Guide
74
Management over a Web Console
Login
6. Enter the IP address of NVR in the address field of a web browser and click search, the
following screen is displayed:
7. Click Allow in the ActiveX plug-ins window at the bottom of the screen and the following
window is displayed:
75
30 Series Network Video Recorder User Guide
8. Click Install and wait till the login window shows again. For the first login, the default
username is “admin” and the password is “1234”.
9. Enter the username and the password and click LOG IN to enter the live view screen.
Once you log in, the system defaults to the live view screen, which provides access to other
configuration entry. The screen elements are described as follows:
Name Description
76
Management over a Web Console
Provides functions to extend, rotate, and redo the layout. System Alarm
Layout contents
In /Alarm Out are also shown in here.
Time & Log out Shows the time and logout function.
Exerts Pan/Tilt control on a selected view cell if the camera comes with
PTZ Panel
mechanical PTZ mechanism.
Camera List
The camera list displays the recruited cameras by the sequential numbering order you
configured in the System Settings utility.
To arrange a view window layout, click and drag a camera from the camera list to a view
window.
Depending on the size and screen resolution of your monitor, the snapshots of 6 cameras are
displayed in this panel. If you logged in using a credential of a limited access, you may only
see cameras that you can access instead of all the cameras.
77
30 Series Network Video Recorder User Guide
Online: the online status can be accompanied by the Alarm In/Alarm Out
icon .
Offline: camera is disconnected.
An unconfigured camera instance.
Alarm input is triggered.
Connected and recording video to system storage.
Connected with live streaming.
Disconnected or trying to establish a connection.
Layout
By default, 5 typical layouts are provided for the user. They include: 1x1, 2x2,
3x3, 1V+3, and 1M+5. System default is the 2x2 layout. Cameras that do not fit into
the first page of a layout, say, a 3x3 layout, will be displayed on the succeeding layout pages.
The layouts for 4/8/16 CHs NVR are different. Please refer to the actual
Note
NVR you used.
Each functional button on the screen is activated by a mouse hover. For example, the below
states designate user's operation on a button:
• : not selected.
78
Management over a Web Console
There are another 4 user layouts that can be individually configured. An administrator can
insert camera views into these layouts and save the configuration. These user layouts can be
seen by all users.
If you click the Rotate button before the configuration changes can be saved, your
configuration changes will be lost.
Layout Contents
A few functional buttons are available on the Layout contents page.
Full view: extends the view cells on the current layout to the full of the screen.
Exit full view. It is showed at the left side of the full view window.
Rotate: the rotate function lets system display successive layout pages by
the intervals of 10 seconds. The layout page that does not contain camera
views will be skipped.
Click to display the NVR's Alarm In/Alarm Out statuses.
79
30 Series Network Video Recorder User Guide
Information Bar
Connected with live streaming; a single click on this icon can trigger a
manual recording.
Connected and recording video to system storage.
Disconnected or trying to establish a connection.
15:00:59 Video time
2019.03.04 Date
Tool Bar
Take a snapshot.
80
Management over a Web Console
Unmute
Stream selector.
Volume controller.
PTZ Panel
Figure 7-11 PTZ Panel
The PTZ panel takes effect for cameras that come with mechanical PTZ functions. It does not
support digital PTZ functions. To utilize its functions, select a view cell populated by a PTZ
camera, such as a speed dome.
Depending on the individual functions that come with PTZ cameras, some functions will not
be available for every camera. For example, the zoom controller will not apply for a PTZ camera
that comes without a mechanized zoom module
Event Panel
The event panel keeps up to 200 events and displays the latest 10 event entries with the
latest alarm on top of the list. Older events will be erased if the number exceeds 200.
It is polled every 10 seconds. A mouse hover on an alarm entry displays full information of the
event.
81
30 Series Network Video Recorder User Guide
Note that multiple alarms can be triggered by one incident. See Setting-Event-Event on page
44 for how to configure the event settings.
If an event is configured with a recording action, there will be a play button to the left of
the alarm message.
Click and the event playback window will begin playback of a footage taken 10 seconds
before the occurrence of an alarm. The playback of an alarm-triggered recording will normally
last for one minute. If, however, you configured a shorter pre- and post-alarm recording time,
your alarm recording may be slightly shorter. The default for pre- and post-alarm buffer time
are 5 seconds and 20 seconds.
View live video: displays the live view streaming instead of the alarm
recording.
Mute or unmute the audio with the current playback. Drag the controller to
change the audio volume level.
82
Management over a Web Console
Name Description
Provides a glimpse of all cameras that have recorded data. Basic
Camera List
information is also provided along with a screenshot.
Provides functions to extend, rotate, redo the layout, and the synchronous
Layout
playback.
Playback Displays the playback functions. Snapshot, bookmark, and export
panel functions are also available on individual view cells.
Reports events transmitted via cameras' DI connections or those by the
Event panel
Motion Detection, etc.
Shows when the recording took place, and thus enables users to quickly
Calendar
locate a specific part of recording in history.
83
30 Series Network Video Recorder User Guide
Camera List
The camera list displays the 8 added cameras by the sequential numbering order you
configured in the System Settings window. The elements in the Camera list on a Search
recording clips window are identical to those on a Liveview window.
To begin playback and search for past recordings:
1. Double-click on a camera in the camera list. The Calendar panel will display the days
video recording actually took place. And those days will be highlighted by a blue
background.
Layout
3 types of layouts are provided for the Search recording clips window: 1x1, 2x2, and 1+3.
Users can simultaneously playback up to 4 recorded videos.
Full view: extends the view cells on the current layout to the full of the
screen.
Exit full view. It is showed at the left side of the full view window.
84
Management over a Web Console
Playback Panel
Figure 7-17 Playback Panel
Pause
Speed up. Increases the playback speed, to 2x, 4x, 8x, 16x, and then to a
maximum of 32x.
Display the current playback status, such as Playing, Pause, play speed, or
Stop.
Timeline zoomer. Use the zoomer to zoom in for more precise skimming.
You can use the timeline zoomer to scale down the span of time. For
example, if the time span is reduced to 1 hour, then each section on the
time line represents 15 minutes of recording. The total time span of a
timeline starts from the minimal of 4 minutes, 20 minutes, 40 minutes, 1
hour, and up to a maximum of 24 hours.
Timeline slider thumb. Click and drag this thumb button to move along
and reach a specific point in time. A click on the time line will also work.
In the Synchronous play mode, a change to the zoomer will be reflected by all
Note
synchronously playing view cells.
Event Panel
The event panel displays the events or bookmarks recorded by the day of recording. Two
additional buttons are available: Page selector and Event filter. See Creating an Event on
page 44 for how to create an event.
85
30 Series Network Video Recorder User Guide
• A playback button will be available with an event-triggered recording. The event panel in
the Playback window also supports the List mode and Icon mode that are similar to that
in the Liveview window.
• There can be numerous alarms occurring in a day. Use the page selector to display
different pages of event entries. Up to 200 entries can appear on one page. Note that the
new events that occurred seconds or minutes ago may not be instantaneously listed on
the page.
Event Filter
Use the event filter to find out specific events. Use the check circles below to narrow down
your search criteria by event name or event type by Motion detection, Alarm input, Alarm
output, Tampering, PIR, or those manually marked down as Bookmarks.
Settings Screen
The settings screen is identical to those found in the local settings. See Settings on page 29
for more information.
86
Honeywell Building Technologies – Security Americas (Head Office) Honeywell Building Technologies – Security Россия и СНГ
Honeywell Commercial Security 121059 Moscow,
715 Peachtree St. NE UI, Kiev 7 Russia
Atlanta, GA 30308 www.security.honeywell.com/ru
www.security.honeywell.com/
Tel: +7 (495) 797-93-71
Tel: +1 800 323 4576
Honeywell Building Technologies – Security Asia Pacific
Honeywell Building Technologies – Security Mexico Building #1, 555 Huanke Road,
Mexico: Av. Santa Fe 94, Torre A, Piso 1, Col. Zedec,
Zhang Jiang Hi-Tech Park Pudong New Area,
CP 0121, CDMX, Mexico.
Shanghai, 201203, China
Colombia: Edificio Punto 99, Carrera 11a.
98-50, Piso 7, Bogota, Colombia. www.asia.security.honeywell.com
Tel: 01.800.083.59.25 Tel: 400 840 2233
www.security.honeywell.com
+1 800 323 4576 (North America only)
https://www.honeywellsystems.com/ss/techsupp/index.html
Document 800-25988V1 – Rev B– 06/2021
© 2021 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from
Honeywell. The information in this publication is believed to be accurate in all respects. However, Honeywell cannot assume responsibility for any
consequences resulting from the use thereof. The information contained herein is subject to change without notice. Revisions or new editions to this
publication may be issued to incorporate such changes. For patent information, see www.honeywell.com/patents.