Professional Documents
Culture Documents
Exercise Solution
Exercise Solution
APG43L)
LZU-Customized
GSM QoS Management
DISCLAIMER
Ericsson shall have no liability for any error or damage of any kind
resulting from the use of this document.
© Ericsson AB 2020
The purpose of this exercise is to introduce the PMIC GUI and to explain how to
initiate, schedule and monitor recordings on statistical counters of MSS nodes.
NOTE: The Create Subscription button is visible only if you have NOT
selected any subscription in the main table.
LZU-Customized -2 -
GSM QoS Management
In the next GUI page, open the Resources tab to select the node(s) that the
subscription should collect from.
Then click on the “Add Topology Data” to select the NE(s) to be included in the
subscription.
Before you proceed with adding NEs observe the options available.
-3 - LZU-Customized
GSM QoS Management
Collections
Saved Searches
Search
Topology
Open the Counters tab to select the counters to be collected by this subscription.
HINT: use the search box and as you start typing see below the matching hits.
Use the Ctrl button for selecting multiple counters and use the Right Arrow
button to move the selected counters to the right panel.
Open the Scheduler tab to define the scheduling for this subscription.
LZU-Customized -4 -
GSM QoS Management
-5 - LZU-Customized
GSM QoS Management
In the next GUI page, open the Resources tab to select the node(s) that the
subscription should collect from.
Then click on the “Add Topology Data” to select the NE(s) to be included in the
subscription.
LZU-Customized -6 -
GSM QoS Management
-7 - LZU-Customized
GSM QoS Management
IMPORTANT: Note that when the PMIC application detects that you have
selected any node of type MSC-S it disables the option to select counters!
LZU-Customized -8 -
GSM QoS Management
Exercise 2 ENIQ
This exercise will instruct you how to:
Access ENIQ
Your instructor will show you how to connect to ENIQ. You will be given a
username and password:
Usr:_________________
Psw:________________
-9 - LZU-Customized
GSM QoS Management
( As provided by system )
2 Unpack (unzip) and open the SCR File in Explorer. What SCL files are there?
( As provided by system )
( As provided by system )
( As provided by system )
LZU-Customized - 10 -
GSM QoS Management
STS in APG
1. Enter the MoM in APG and check the Object Types under
StatisticalCounterM. How many Object Types are there?
show all
2. Enter the MoM for the Object Type xxxxxxxxxx. How many Counters are
there?
show all
show all
- 11 - LZU-Customized
GSM QoS Management
– Initiating mode
For Initianting mode, first the destination set has to be created in CDH (Common
Destination Handling). Use appropriated MO and defines the destination with the
transfer type FTPV2. This example creates a communication transfer channel consisting
of an initiating destination.
In order to transfer data to this destination (import/export area) A destination set needs
to be defined. The destination set is a group of destinations to provide a secure and
redundant data transfer. Even if we only will use one destination in our destination set, it
still needs to be defined. In this example, this transfer queue will be used in the next
exercise, so, it is going to be possible to see file transferred to the remote server.
The instructor will provide the students with an remote FTP-server that can be used for
this exercise:
IP address: …………………………………………………………
Password: ……………………………………………………….…
Primary
Transfer Queue Destination Set Destination
SFTP
Remote
Server
STEP 3 STEP 1 STEP 2
IP: X.X.X.X
STEP 4
InitiatingDestinationSet IDESTSETX
PrimaryInitiatingDestination IPRIDESTSETX
AdvancedInitiatingParameters ADVINITDESTX
FileTransferQueue INITRANSQX
AdvancedFileTransferQueueInfo ADVFTINITDEST
X
LZU-Customized - 12 -
GSM QoS Management
1. Create Destinations
Reach MO:
>configure
ManagedElement=<Node Name>, SystemFunctions=1, AxeFunctions=1,
DataOutputHandling=1, DataTransferM=1, FileTransferManager=1
(config-FileTransferManager=1)>InitiatingDestinationSet=IDESTSETX
(config-InitiatingDestinationSet= IDESTSETX)>
PrimaryInitiatingDestination=IPRIDESTSETX
ipAddress =ipaddress_of_remote_destination
transferProtocol=SFTPV2
username=loginname_of_remote_destination
password=password_of_remote_destination cleartext
portNumber=22
remoteFolderPath=temp
up
(config-
InitiatingDestinationSet=IDESTSETX)>AdvancedInitiatingParameters=ADVINITDESTX
(config-AdvancedInitiatingParameters=ADVINITDESTX)>validate
(config-AdvancedInitiatingParameters=ADVINITDESTX)>commit -s
(config-AdvancedInitiatingParameters=ADVINITDESTX)>up
(config-InitiatingDestinationSet=IDESTSETX>PrimaryInitiatingDestination= IPRIDESTSETX
(config-PrimaryInitiatingDestination=IPRIDESTSETX)>
2. Check that the status of the destination defined is True with the command
(config-PrimaryInitiatingDestination=IPRIDESTSETX)>connectionVerify
Result:true
3. Now when the destination (set) has been defined the transfer queue itself shall be
defined. Define a Transfer Queue that is linked to the destination set previously defined.
(config-PrimaryInitiatingDestination=IPRIDESTSETX)>up
(config-InitiatingDestinationSet= IDESTSETX)>up
(config-FileTransferManager=1)>FileTransferQueue=INITRANSQX
- 13 - LZU-Customized
GSM QoS Management
(config-FileTransferQueue=INITRANSQX)>InitiatingDestinationSet=IDESTSETX
(config-FileTransferQueue=INITRANSQX)>AdvancedFileTransferQueueInfo=ADVINITDESTX)>commit
Verify the results:
cdhls -l
cdhdsls -l
afpls -l
stmotls –l LOAS
>configure
>ManagedElement=<node name>, SystemFunctions=1, AxeFunctions=1,
DataOutputHandling=1,StatisticalCounterM=1,ObjectTypes=1
>ObjectType=LOAS
>isIncluded=true
>commit
>configure
ManagedElement=1,SystemFunctions=1,AxeFunctions=1,DataOutputHandling=1,
StatisticalCounterM=1,Reports=1
>Report=202X
>name=REPORT1X
>objectTypeList=LOAS
>commit
For this task, check the time in APG, use command “date”.
configure
ManagedElement=1,SystemFunctions=1,AxeFunctions=1,DataOutputHandling=1,
StatisticalCounterM=1,MeasurementPrograms=1
MeasurementProgram=102X
LZU-Customized - 14 -
GSM QoS Management
Name=COMMONmp1
reportId=202X
outputFormat=LF
transferQueue=INITRANSQX
interval=15
beginTime={mpbeginTime}
validate
commit
up
stmmp -L -l
4. Check the status of the transfer queue using the command afpls. Use long listing and list
all files and directories.
afpls –ls
5. Verify the result in the import/export area in APG43L. Verify that the files are output and stored
in the correct destination directory within the import/export area on the APG43L.
SC-2-1:# cd /data/opt/ap/internal_root/data_tranfer/source/sts/INITRANSQX
Expected result:
SC-2-1:# ll
-rw-r--r-- 1 root DATATRNSGRP 96 Jul 29 19:15 LOAS.data
-rw-r--r-- 1 root DATATRNSGRP 117 Jul 29 19:15 generation.data
-rw-r--r-- 1 root DATATRNSGRP 96 Jul 29 19:15 status201307291900
- 15 - LZU-Customized
GSM QoS Management
LZU-Customized - 16 -