Technical Specification
SI.No Description of Items a
01. Pneumatic Hammer (Impact Cylinder) on Dryer Including Mounting Bracket set 04 (Four)
Model No. :M/3060 or Equivalent
Brand : To be mentioned.
Manufacturer : To be mentioned.
Country of origin : Tobementioned.
Existing Brand : Norgren
Process Fluid : Compressed Air
Cylinder Diameter 26"
Material-Piston : Steel (Grade 45)
Material-Piston rod : Hardened Steel
Material of Front end Cover : Alloy o Steel
Material of Rear end Cover : Alloy
al of Center Piece : Alloy or Steel
Material of Seals : NBR (Nitrile Butadiene Rubber)
Operating Pressure
Normal Range : 4 bar-10 bar
Rated Pressure 3.5 bar
ireme range 2.7 ~10 bar
Port size :G'y
Operating Temperature 20°~ 80°C
Operation Double Acting
Mounting Position : Vertical
Max. Cyele Per min 35
Energy at 5.5 bar 253 Joule
Air Consumption at 5.5 bar 1413 Lcyele (dm’/eycle)
Max recommended weight to be
carried vertically by the piston rod: 36.2 kg
NB: 1) Detailed drawings as per attached
2) Material grade as per Drawing sheet No. ZJ0SO1
02. Spares for Pneumatic Hammer on Dryer:
2a) Complete Air supply unit(Air regulator, Air filter & Pressure Gauge) 04 (Four)
Model No. : BL68-608G or Equivalent
Brand : To be mentioned.
Manufacturer : To be mentioned.
Country of origin : To be mentioned.
Existing Brand : Norgren
2b) ‘/, Solenoid Valve including Side ported sub-base 04 (Four)
Solenoid Valve Model No. : SXE 9575-A70-00/13J or Equivalent
Side ported sub-base Model No. : M/P19138 (G'/2)
Brand : To be mentioned.
Manufacturer : To be mentioned.
Country of origin : To be mentioned.
Existing Brand : NorgrenQuantity
Description of Items
SI.No wuctoun
fou!
a eae ve = CR143C or Equivalent
Brand : : To be mentioned.
Manufacturer : To be mentioned.
Country of origin : To be mentioned.
Existing Brand : Norgren
Technical Terms & Conditions:
lL
Brand, Model No. /Code No./Suffix code, Name of the Manufacturer & Country of Origin
must be mentioned in the technical offer.
. Detail Technical Specification with dimensional drawing must be supplied with the
technical offer.
. Country of origin and Port of shipment should be same.
. All documents, literature, catalogue data sheet etc, submitted by the bidder with the technical
offer must be in English Language.
- Manufacturer's Test Certificate, Country of origin certificate, 1 year warranty certificate
and Manual book (Installation, Operation Maintenance & Troubleshooting) must be
submitted along with supply of the goods.