Professional Documents
Culture Documents
Key Features:
Permanently lubricated, direct-drive centrifugal blower.
Light weight, corrosion-resistant construction
Wide range of ceiling grid system compatible
Integral metal faceguard protects the HEPA/ULPA filter
from damage during installation and transportation.
Fan inlet guard grille ensure operator safety during
installation and prevents large objects from falling into
the casing and damaging the blower
Pre Filter available on request
Unique modular one-piece blower and electrical
assembly is designed be serviceable and easily
replaceable at lower maintenance costs.
Standard unit shipped with 3 core electrical wires.
Quiet operation of less than 56dBA (measured at a
distance of 1m from the unit at the standard airflow
velocity of 0.45m/s or 90 FPM with standard AC blower.)
Introduction: Choose from conventional AC or energy efficient EC
The ZHUOWEI Fan Filter Unit is a self-contained ceiling unit blowers
for use in turbulent mixing and laminar flow cleanroom Standard blower speed controller.
applications. Fan Filter Unit is designed to provide filtered Duct Collar 10” (250 mm) and 12” (300 mm): allows
laminar airflow over a specific area. The unit integrates a direct connection to the air air conditioning supply.
high efficiency fan together a HEPA/ULPA filter. The FFU Room-Side Replacement (RSR) available with gel seal
draws in contaminated air from the top of the module, and filter element, filter is replacement from the roomside.
exhaust filtered clean air vertically in a laminar air stream at
its base. FFU’s are commonly used in the construction of
Class 1 to Class 100,000 cleanrooms ( as per the US Federal Common Applications:
Standard 209E).
Conventional cleanroom construction
We developed FFU is from basing upon the concepts
Module hard and soft wall cleanrooms
including, to reduce running cost by saving energy, and to
Laminar flow cabinets and other clean air devices
reduce initial cost by total design of clean room; such as
noise specification etc, to meet all the requirements for
constructing, operating, and maintaining cleanrooms. Quality control at factory before shipment:
Our manufacturing capabilities range from complete Functional tests and visual inspection
computerized sheet metal design, to fabrication and Electrical safety analysis tests
assembly. A vertically-integrated approach ensures that Air velocity testing
quality can be controlled at every step of the way.
Blower Options:
Standard AC blower
Fan Filter Units utilize a standard AC Blower,
there are two options of blade as below:
EC blower
Optional EC blower is available and has the
following advantages: `
POWDER BAKED
GALVANIZED ZINC SUS 304 SUS 430 ( MIRROR TYPE) EPOXY FINISHING
COATED STEEL
STEEL