Professional Documents
Culture Documents
SERVICE MANUAL
Dishwasher 2005
SEVEN DIGIT
DRAFT
All the parts included in this document are the property of Indesit Company S.p.A.
All rights reserved. This document and the information it contains are supplied without liability for possi-
ble errors or omissions; no part of this document can be reproduced, used or copied without written
permission or without being authorised by the terms of a contract clause.
2
Downloaded from www.Manualslib.com manuals search engine
GB
CONTENTS
2. FUNCTIONING 7-10
Programs 7
Program Table 8
Function setting 9
New programs 10
Other innovations 11
3. COMPONENTS 12
4. WIRING DIAGRAMS 13
5. TECHNICAL ASSISTANCE 14-20
Demo Mode 14
Auto Test 14
Rod and Sat Testing cycle 15-17
Fault & Solutions 18
Trouble Shooting 19
Assembly & Disassembly 20-21
3
Downloaded from www.Manualslib.com manuals search engine
GB
1. TYPOLOGY OF PRODUCT:
TYPE
1.1. LEGEND:
Ariston: LF 70 IT - LF 70 X IT - LF 70 FR - LF 70 EU - LF 70 X EU
L L 7 0XFR
Brand + Interface Dimensions: Interface:: Colour: Country:
L Knob 4 45 cm S Silver IT Italy
LL Led 6 60 cm IX Inox EU Europe
LF Seven Digit 7 Digit60cm Vuoto White FR France
LD LCD UK England
DE Germay
TK Turkey
SK Scandinavia
F DW 7 0P
Dimension DW =Dish Washer Interface: 5Alluminium Colour:
F = Full 4 Knob S Silver
S = Slim 6 Led T Sandstone
7 Digit G Graphite
8 LCD A Alluminium
1.2. INTERFACE:
3c 3h
3i
3a 3l
3m
3b
3d 3f 1
3e 3g
1. STAND-BY button 2 3 4 5 7
2. PROGRAM selector (button) 6
3. DISPLAY 3h. CYCLE PROGRESS leds
3a. PROGRAM led 3i. 4IN1 led
3b. LACK OF RINSE AID led 3l. HALF LOAD led
3c. LACK OF SALT led 3m. DELAY TIMER led *
3d. PRE-WASH led 4. DELAY TIMER button*
3e. WASH led 5. UPPER HALF LOAD button
3f. RINSES led 6. 4IN1 button
3g. DRYING led 7. START/RESET button
4
Downloaded from www.Manualslib.com manuals search engine
GB
TYPE
MODEL: SEVEN DIGIT
Dimensions:
Width: 60 cm
Height: 85 cm
Depth: 60 cm
Water supply:
Maximum pressure: 10 bar
Minimum pressure: 0,5 bar
Power supply:
Tension: 220/230 Volt. (EU) - 230/240 Volt. (UK)
Maximum power absorbed: 2000 Watt.
5
Downloaded from www.Manualslib.com manuals search engine
GB
TYPE
Energy Dishwasher
Less efficient
Energy c o n s u m p t i o n kWh/cy c l e
(based on test results for manufacturer’s
1.05 Energy consumption Kw/h - normal
standard cycle using coold fill)
cycles
Actual consumption will
depend on how the appliance is used
Norm EN 60456
Washing machine label Directive 95/12/EC
6
Downloaded from www.Manualslib.com manuals search engine
GB
2. FUNCTIONING:
2.1. PROGRAMS:
2.1.1. PROGRAM SETTING:
Procedura da eseguire:
To set a program, follow this procedure:
OPERATION
a. Select a program by pressing the relative button
until the number of the program chosen appears
on the display.
b. Select other eventual wash options.
c. Start the wash by pressing the START/RESET
button, the machine emits a beep to confirm the order.
REMARK: three acoustic signals and the word “END” on the display communicates the end of the wash
cycle.
7
Downloaded from www.Manualslib.com manuals search engine
GB
Detergent Program
Indications to Programs (A) = Wash dispenser Pre-wash Drying length
choose programs (B) = Pre-wash dispenser (degree of
OPERATION
tolerance +-
10%)
powder liquid tablets
Normal
An economical wash,
with low energy 25 gr (A) 25 ml (A)
consumption, suitable for 1 (A) • • 145'
crocker y and pots. 5 gr (B) 5 ml (B)
Eco
Remark
To facilitate the dosage of detergent, it is better to know that:
1 dessert-spoon = 15 gr. of powder = 15 ml of liquid ca.
1 tea-spoon = 5 gr. of powder = 5 ml of liquid ca.
8
Downloaded from www.Manualslib.com manuals search engine
GB
OPERATION
3. When the time is expired, the program starts.
To change the delay and select a shorter time, press DELAY TIMER button. To reset it, press the button
many times until the CYCLE PROGRESS led, relative to the program selected, switches on.
4 in 1 option:
To use multifunction tablets (2 in 1, 3 in 1, 4 in 1), press “4 in 1” button. This function increases the total time
of a program of about 10/15 minutes.
This button is not compatible with the following programs: FAST, SOAKING, BABY.
9
Downloaded from www.Manualslib.com manuals search engine
GB
OPERATION
Program no. 6 - BABY:
Seven Digit dishwasher has a new program, called “BABY”; it is a hygienic cycle to wash nursing-bottle,
teats, dishes, cups, glasses, cutlery and all things used by children
The handbook recommends to load crockery on the upper basket, but it is important to know that this cycle
puts on both the basket and it is not compatible with Half Load function. It is advisable to use the upper
basket because of the lower pressure of its wash arm, avoiding that the small and light cutlery used for
children are expelled from the basket.
This program can not be used with multifunction tablets (it does not accept “4 in 1” function) and does not
supply rinse aid.
.
4 in 1 option:
It allows the use of multifunction tablets.
The option 4 in 1:
• Does not restrain salt or rinse aid pilot light.
• Does not restrain the supply of rinse aid.
• Does not restrain the regeneration of the resins
During the wash phase:
• It warms water up to reach a temperature of 55°C (in intensive level it reaches a temperature of 63°C).
• The wash cycle is lengthened of 10 minutes (except the intensive).
The hot rinse provides:
• Warm up to 70°C (except for stemware).
• The intensive cycle does not change in the wash phase but selecting the “4 in 1” option modifies only the
hot rinse (it reaches 70°C).
• In the Stemware cycle the “4 in 1” option increases the temperature of the hot rinse from 65°C to 68°C;
the Stemware Cycle does not reach 70°C in order to protect crystal glasses from corrosion (the wash
phase changes like the other cycles).
• The duration of the cycles, after the selection of “4 in 1” option, changes from 12 to 15 minutes.
• The water softener is adjusted to Minimum position; this setting allows a salt consumption equal to 25
gr./cycle.
REMARK: In appendix no. 1 are schematized the present standard features and the ones modified to
permit the selection of “4 in 1” function.
10
Downloaded from www.Manualslib.com manuals search engine
GB
OPERATION
- Choosing Half Load option, when the machine HEATING CIRCUIT” fault.
supplies detergent, both the wash-arms run to
check the eventual presence of filters clogged and
to melt the detergent.
- To prevent an erroneous signalling the following
modification has been introduced on this platform:
11
Downloaded from www.Manualslib.com manuals search engine
GB
3. COMPONENTS:
The new heater is 1800 Watt - powered (the old one:
2040 Watt) and operates at a tension equal to 230
Volt and 7,8 Amp, at a resistance equal to 29,4 Ohm.
COMPONENTS
Heater
Drain pump
12
Downloaded from www.Manualslib.com manuals search engine
GB
WIRING DIAGRAMS
13
Downloaded from www.Manualslib.com manuals search engine
GB
5. TECHNICAL ASSISTANCE:
5.1. DEMO MODE:
Seven Digit washing machine is provided with the Demo Mode function. To select it, press and hold Power
On + Start + Delay simultaneously for 5 seconds, with the machine on; the display shows the message
“dOn” to confirm that the function has been selected.
To deselect it, press Start/Reset and Power On simultaneously for 3 seconds; the display shows the
message “dOF” to confirm the de-selection of the function.
ASSISTANCE
To start Auto Test, follow this procedure:
1. Switch on the dw, choose program no. 1, switch it off.
2. Switch on the dw, choose program no. 2, switch it off.
3. Switch on the dw, the display will be off to indicate that the function has been selected.
Choose program no. 2 and press Start to start Auto Test SAT (program no. 1 starts the ROD testing, used in
the factory to test the product).
14
Downloaded from www.Manualslib.com manuals search engine
GB
ASSISTANCE
9.1. If it is in F (full), filling phase is finished, the dw only washes
9.2. If it is in E (empty), it fills and wash up to reach F pressure switch or a max quantity equal to 8 lt,
- If at 8 lt the pressure switch has not still reached F state, the dw is in filter cleaning alarm.
Probable defect: faulty pressure switch, cables disconnected/inverted.
10. WASH MOTOR on, 1 minute of preparation to filling.
- In case it fills a quantity higher than 8 litres, the dw is in filter cleaning
Probable defect: faulty pressure switch, cables disconnected/inverted.
11. Activation of WASH MOTOR, HEATER, ELECTRO-DISPENSER, (washing up/down) 20".
12. Checking of HIGH PRESSURE sensor 5sec. (it must be on).
- If high pressure sensor is off, the dw is in filter cleaning alarm.
Probable defect: faulty HP sensor - DECANTER spout clogged.
13. WASH + HEATING 1 minute
14. If the dw has selected Half Load, see point 15.
- If the dw has selected the alternated wash, see point 16
15. Section about the control of dw with Half Load (no alternated wash)
15.1 Deactivation of wash pump
15
Downloaded from www.Manualslib.com manuals search engine
GB
ASSISTANCE
18. Drain V +15"
- If pressure switch does not reach empty state within a max time of 4 minutes, the dw goes in drain
time-out
Probable defect: faulty/disconnected pump, faulty pressure switch /cables inverted
19. ....START OF SHORT TESTING CYCLE...... CONTINUATION OF LONG TESTING CYCLE...
20. TURBINE-filling of 3 litres, in static phase.
- If the turbine does not send a signal to the timer, but water fills the tank, reached the static F
pressure switch (1,2litri), it activates the wash motor and loads up to reach dynamic F pres-
sure switch, during a max time of 153 sec. from solenoid valve activation.
Probable defect: faulty/disconnected turbine
21. WASH MOTOR activation.
22. TURBINE-filling of 1 litres, in dynamic phase (total 4 lt).
23. Checking pressure switch state (V - P), (wash motor on).
23.1 If it is in F (full), it does not load anymore.
23.2 If it is in E (empty), it loads up to reach F pressure switch or a max quantity of 6 litres.
- If at 6 lt the pressure switch has not still reached F state, the dw is in filter cleaning alarm.
Probable defect: faulty pressure switch, cables disconnected/inverted.
16
Downloaded from www.Manualslib.com manuals search engine
GB
REMARK: The testing cycle must completely reset as wash cycle does.
ASSISTANCE
17
Downloaded from www.Manualslib.com manuals search engine
GB
ASSISTANCE
Drain tube wrongly positioned, outlet too low. Empty PRESSURE SWITCH during wash
phase
Strap, filter, micro-filter clogged. Filters clogged
Timer not programmed - Wrong keyboard SOFTWARE recognition error
Faulty SV. SV broken
Water tap off, faulty sv, sv wires detached. Max time (90 sec.) for turbine rotation and full
pressure switch exceeded.
Wires disconnected, faulty sv, timer triac broken. Unconformable electric circuit of LOADING
SOLENOID VALVE (90 sec.)
Wires disconnected on timer/heater, faulty HEATER RELAY open (9 sec.)
timer, ITR interrupted
Heater circuit wires disconnected, faulty timer Unconformable HEATER CIRCUIT (9 sec.)
relay, heater ITR not calibrated.
Replace timer (faulty NTC). Unconformable THERMISTOR (NTC) CIRCUIT
(no continuity) (9 sec.)
NTC band detached from its housing or not Max time to reach washing phase °T exceeded
calibrated. (60 min)
Problems on wiring or timer No communication
18
Downloaded from www.Manualslib.com manuals search engine
GB
ASSISTANCE
19
Downloaded from www.Manualslib.com manuals search engine
GB
5.4 ASSEMBLY/DISASSEMBLY:
Demounting the machine, its functional components are the same, therefore we are documenting only the
components which have been modified in their characteristics or in their position inside the machine.
ASSISTANCE
6. Make the board slide leftwards.
2. Remove the plinth. 7. Make it go out from the hole on the left.
20
Downloaded from www.Manualslib.com manuals search engine
GB
ASSISTANCE
Disassembly of the NTC
21
Downloaded from www.Manualslib.com manuals search engine
GB
6. EXPLODED VIEW:
Cabinet.
VIEWS
004 WHITE TOP EVO3 024 DEW BASIN INLET TUBE
005 PLUG TO FASTEN SHELF 025 PAD WHITE RIGHT PLINTH EVO3
006 PLUG TO FASTEN ROCKING ARM 026 ADJUSTABLE SHAKING-PROOF FOOT
007 DOOR GASKET BIMESCOLA
EXPLODED
027 TANK BOTTOM BASIN 60CM
008 RIGHT-SIDE SOUND-ABSORBER 028 CONVEX WHITE PLINTH EVO3
009 RIGHT SIDE PANEL WHITE 27 029 FRONT LOWER CROSSBAR 60CM NPE
010 BACK STOPPER BASKET SLIDE EVO3 030 FOOT HOLDER TYPE X ‘LVS2000’
011 UPPER BASKET SLIDE EVO3 031 FOOT 155MM LVS EVIZZATE
012 PLATE/RAIL ASSY UPPER BASKET 032 PAD WHITE LEFT PLINTH EVO3
012 CONVEX WHITE EXTERNAL DOOR EVO3 033 LEFT-SIDE SOUND-ABSORBER
013 FRONT STOPPER BASKET SLIDE EVO3 034 FRONT UPPER CROSSBAR
014 ADJUSTABLE UPPER BASKET ASSY MARKII 035 FRAME TANK GASKET SUPPORT 60CM
015 BLUE FLAP UPPER BASKET EVO3 036 COVER FRONT SUPPORT ‘LVS2000’
015 BLUE FLAP BABY CYCLE 037 CUTLERY BASKET ASSY ARISTON EVO3
015 PINK FLAP BABY CYCLE 039 GRILL CUTLERY BASKET NEW
016 BASKET HANDLE EVO3 040 HANDLE BASKET REGULATION EVO3 ‘NUOVA’
017 LOWER BASKET ASSY EVO3 041 UPPER BASKET WHEEL EVO3
018 WHEEL BODY LOWER BASKET 042 SIDE SPONGE DOOR L.I.
019 WHEEL ASSY LOWER BASKET
22
Downloaded from www.Manualslib.com manuals search engine
GB
001 EXTERNAL DUCT ASSY (HIDDEN HEATER) EVO3 029 DOUBLE SOLENOID VALVE EVO3
002 CAP BASKET SLIDE ‘LVS 2000’ 030 COVER DOUBLE SOLENOID VALVE
003 RING NUT FIXING EXT. DUCT UPPER WASH ARM 033 HALF LOAD SOLENOID VALVE ‘LVS2000’
004 SUPPLY DISPENSER ASSY EVO3 034 FEMALE SCREW ASSY ‘LVS 2000’
005 INNER DUCT EVO3 035 ELECTRO-PUMP 1/2CAR. V220 75W-P24
006 GASKET UPPER SPRAYER 036 SPRING MOTOR SUSPENSION
007 UPPER BENT SPRAYER ASSY 037 TUBE WATER SOFTENER/CUP L.480MM ‘LVS2000’
VIEWS
009 INLET TUBE ACQUASTOP L=1470M 038 TUBE SOLENOID VALVE/AIR-BREAK L=850
010 SUPPLY CABLE SCHUKO+FILTRO ANTID. 039 CONNECTOR BASIN OVERFLOW EVO3
011 CENTRAL FILTER ‘LVS2000’ 040 CONNECTOR GASKET OVERFLOW
012 EXTRACTABLE FILTER INOX ‘LVS2000’ 041 OVERFLOW BODY EVO3
EXPLODED
013 CYLINDRICAL PLASTIC FILTER 042 GASKET OR (23,81X2,62) ‘LVS2000’
014 POLYESTER MICRO-FILTER 044 SLEEVE MOTORE UNIT
015 RING NUT FIXING SET SUMP ‘LVS2000’ 045 HIGH PRESSURE SENSOR ASSY
016 DRAIN PUMP V220-240 50HZ EVO3 046 RING NUT LOWER BASE SUPPORT
017 DRAIN PUMP ‘LVS2000’ 047 SUPPORT LOWER MANIFOLD ‘LVS2000’
018 FLOAT SUPPORT OVERFLOW 048 SUPPORT HEATER SLEEVE
019 MICRO-SWITCH ACQUASTOP 049 SLEEVE HEATER MOTOR
020 OVERFLOW FLOAT 050 WASH HEATER W1800 45CM
021 TUBE CLIP PRESSURE SWITCH EVO3 051 LOWER PLASTIC WASH-ARM 60CM EVO3
022 PRESSURE SWITCH TUBE LVS EVO3 052 RING NUT AIR DUCT BODY ‘LVS2000’
023 PRESSURE SWITCH 90 71 EVO3 053 AIR-BREAK + TURBINE EVO3
024 ADJUSTABLE WATER SOFTENER EVO3 099 GREASE KIT AMBLIG.Q.A 1 GR.
025 NOZZLE GASKET ‘(LVS/89)’ 099 BAND ELECTRO-PUMP FEMALE SCREW
026 RING NUT SALT ‘NEW ARISTELLA’ 099 BAND HIDDEN HEATER
027 CAP SALT ‘NEW ARISTELLA’ 099 BAND HYDRAULIC TUBES 2 CABLES
028 FUNNEL SALT 099 BAND SOLENOID VALVES EVO3
029 RING GASKET FOR DOUBLE SOLENOID VALVE
23
Downloaded from www.Manualslib.com manuals search engine
GB
DRUM ASSEMBLY.
VIEWS
EXPLODED
Ref. Item Ref. Item
001 INNER DOOR ASSY L.I. MARKII 017 RING NUT HINGE PIN LVS2000 D=6MM
004 ELECTR. DETERGENT + RINSE AID REED 018 HINGE PIN ‘LS615ST’
005 MICRO-SWITCH LOCK UNIT 019 LEFT HINGE ITEM ‘LVS2000’
006 LOCK UNIT DOOR EVO3 020 DOOR SPRING EVO3
007 START BUTTON WHITE 27 021 TUBE HINGE SPRING
008 DISPLAY BOARD SEVEN DIGIT 022 FORK FASTENING DOOR SPRING
009 ON-OFF BUTTON WHITE 27 023 INNER SPACER CONVEZ DOOR NEW
010 FRONT PANEL WHITE 27 SERIGRAPHED LF70IT 024 INNER SOUND-ABSORBER DOOR EVO3
011 SOFT-TOUCH ASSY EVO3 099 SCREW FOR CANOE KLIP
014 RIGHT HINGE ITEM ‘LVS2000’ 099 FIXING SCREW INNER DOOR/ FRONT PANEL
015 HINGE ASSY ‘LVS EVO3’ 099 FIXING SCREW HOUSING/EXTERNAL DOOR
24
Downloaded from www.Manualslib.com manuals search engine
GB
VIEWS
EXPLODED
25
Downloaded from www.Manualslib.com manuals search engine
GB
7. APPENDIXES:
Difference between normal intensive program and “4 in 1” intensive one
Intensive
64°c 15' 66,5°c 5' asc.s/h2o x 5'
15' 2'+6' 2'+4' 6' 13' brill RIG.
2'+1' 2'
asc.s/h2o x 20'
DET resine x4'
“4 in 1” intensive
64°c 15' 70°c 5' asc.s/h2o x 5'
15' 2'+6' 2'+4' 6' brill RIG.
2'+1' 2'
asc.s/h2o x 20'
DET resine x4'
Normal
“4 in 1” normal
55°c
55°c 20'
20' 70°c 5' asc.c/h2o x 7'
14' 2'+3' 7' brill. RIG.
2'+1' 2'
asc.s/h2o x 5'
APPENDIX
26
Downloaded from www.Manualslib.com manuals search engine
GB
Eco
48°c 20' 67°C 5' asc.c/h2o x 5'
18' 2'+4' 9' brill. RIG
2' 2'
asc.s/h2o x 30'
apertura dispenser LP resine 4'
“4 in 1” eco
55°C
55°C 30''
30 70°c
70°c 5' asc.c/h2o x 5'
18' 2'+4' brill. RIG
2' 2'
asc.s/h2o x 30'
apertura dispenser LP resine 4'
Stemware
65°c 5' asc. C/h2o x5'
52°c 5' 9' RIG
12' 46.2°C 6' 6' brill asc.s/h2o x20'c/vent
2'+1' 2' 2'
resine5'
colpi di calore per 3'
“4 in 1” stemware
68°c
68°c 5' asc. C/h2o x5'
55°c
55°c 15'
15' RIG
46.2°C 6' brill asc.s/h2o x20'c/vent
2'+1' 2' 2'
resine5'
colpi di calore per 3'
APPENDIX
27
Downloaded from www.Manualslib.com manuals search engine
GB
Difference between normal Auto Duo Wash and “4 in 1”Auto Duo Wash
Difference between normal Just You program and “4 in 1” Just You one
Just You
RIG. brill
resine 4'
“4 in 1”Just You
55°C
55°C 10'
10' 70°C
70°C 2'
1'
RIG. brill
resine 4'
Half Load
28
Downloaded from www.Manualslib.com manuals search engine
GB
Indesit Company
viale Aristide Merloni, 47
60044 Fabriano - Italy
tel. +39 0732 66 11 - telex 560196 - fax +39 0732 66 2954 - www.indesitcompany.com