THE DEPENDABLE
ALpHA-TEST™
SYSTEM
Now available trom DMC is
of Electronic Tensile Test Syst
which may be used in conjunction
with SPC Programs or other Quality
Control disciplines in both OEM and
maintenance applications. The elec
tronic digital readout displs
fasl and reliable source of test data,
andin some models the data may
be output to a printer or other RS232
compatible devoes.
‘The rugged construction and the
portable design
of these test
machines make
any of them a
superior choice tor
on-site or laboratory
se in an infinite variety of
applications, The operation
of the equioment is simple yot
versatile, and DMC will customize
the gripping jaws or ether components
to make test sample installation and
removal an easy task.
Models are available with output
display readings in Pounds, Newtons,
andlor Kilograms to conform with the:
requirements of the users system.
Units are availble for either 115 or
230 valt power input.
its only natural that the company
which supplies the best wire termina
tion tools and equipment would add
the very best Digital Tensile Testers to
further mest the demand for fewer
souroes and improved support
through a wider range of user needs,
(MODEL HPT200 HAND-HELD
‘PULL TESTER
Also consult DMC for Model
HPT200 hand-held pull tester which
bblends the accurac
and rugged
design of the Alphatran pull testers
into a portable battery powered unit
Featured is Mode! MPT-2008,
(Other maclels are listed on Page S.(GENERAL SPECIFICATIONS
MPr2008 | Pri00 | wPT200
oisss07ig ADI 950Kg TWOWIA4Ky | ADOLAF GO7HD
at oa eon
05% | 08% 05% 7
ott | one “on nh) ont
Depky hpe| Data Dspay | Dgtal pay | Cig Display | Dit Oey
ek weak vaPodt ‘eat
vol Reaing | Holden | Hold Reading | Hod Peano
LeDwise" | kedwso" | Dwiser | LoD wise
nigvagts | gnaiis | Nghagts | hahdots
18 VAC S060 e115 ¥A0 5060 Ho | T8 WAC 5460 He 15 VAG Sin He
VAG a0 Hs 290 VAG SO He | 290 50 He or VOC Batley
Speaiha | SOOT | SUF IT | sre OF | art wor
Temperatura} (10° 10.88%) | {10"toerC) | [10° to.98'C) (10° to 38°)
mPr200k F100
Fin a9 en |" 14in 55 om | 2m. 6.08 r)case |
‘oin @54enj [ ein e29en | 9m. 29em) | 95 2819 en) cae |
iWin @7 Sem) | 14 85 en) | 14in 85 cm) |685in (T cn)case|
Bibs. (11 78KD] tis. Aly | 15ibe GHkyh | 2Sibs (1.21 ka) case |
tess optord | endhandt
SPECIFICATIONS FOR | Mpr.200A-5¢ MOTORIZED |
THE MPT-200A MOTORIZED ‘SAFE-T-CABLE™ TESTER
WIRE CRIMP PULL TESTER Lee eee
Rate of pul: 110 10°/rin, Push-button | The specications for this model |
Selectable in 10 17min Increments, | ae the same as MPT-200A. |
= 1/8t/min, @ 1-5"min, Rate of Pull | |
= 1/4"/min, @ 6-10"imin. Rate of Pull TheMPT ou o¢ weaned
Auto“ to test .020, 032" and 040"
(op al Wie/Crimp Break Point m7
7-100 & PT-1008 jiameter Sate--
moDEL P1008 SHOWN ‘Auto Retum to Start Postion in Reset Mode | diameter Safe-T-Cable |
416 Position Siotted Lower Terminal Grip.
MPT-200A Option:
(0-250 Ib Capecty 1 to Resolution * Universal Sett-Tightening Cam-Type Lower
Gti + Ring Tominal Lower Grip * Display Units in Klograms ® Display Units in
Netrions « Lhikg Switching * LiyNewians Switching « 7.5 - 30"/min, Selectable
Rates of Pullin 10 2.5°/min, Increments * Adjustable Set point for Motor Stop at
Pre-Set Force * AS232 Output
PT-100A Options:
Extra-wiide Cam Grips (76 in. wide) « Ring Terminal Lower grip # 15 Position
Slotted Lower Terminal Grip * Safety Cable Grips {Upper and Lower)
PT-100 Option:
Upper Self Tightening (PT-100A type) # Ring Terminal Lower Grip * Upper
Assembly for Short Wires (25 in, min) # Spark Plug Lower Grip Assembly « 20°
Plug Wire Upper Support Assamb\y
HPT-200 Options:
Consult factory
DANIELS MANUFACTURING CORP, ORLANDO, FL sa PHONE: (ov) 295.6161