Professional Documents
Culture Documents
Injetora Sheet
Injetora Sheet
ALLROUNDER 270 S
Distance between tie bars: 270 x 270 mm
Clamping force: 250, 350, 400 kN
Injection unit (acc. to EUROMAP): 70, 100, 170
www.arburg.com
270 S Machine dimensions
1170
4404)
705
330
255
3854)
120
min. 195
max. 410
3050
955
1240
630
1) Injection unit 70
2) Injection unit 100
3) Injection unit 170
4) Conveyor belt
2
Technical data 270 S
EN-GB 270 S
Clamping unit 0 270 S 0
with clamping force max. kN 0 0 0 250 350 400 0 0 0
Opening force | stroke max. kN | mm 0 0 90 | 350 0 0
Mould height, fixed | variable min. mm 0 0 200 | --- 0 0
Platen daylight fixed | variable max. mm 0 0 550 | --- 0 0
Distance between tie bars (w x h) mm 0 0 270 x 270 0 0
Mould mounting platens (w x h) max. mm 0 0 380 x 380 0 0
Weight of movable mould half max. kg 0 135 [200] 0
Ejector force | stroke max. kN | mm 0 0 20 | 100 0 0
Dry cycle time EUROMAP ² 1 pump min. s - mm 0 0 0 0 0 2,0 - 189 0 0 0 0 0
2 pumps min. s - mm 0 0 0 0 0 1,2 - 189 0 0 0 0 0
Accum. min. s - mm 0 0 0 0 0 1,0 - 189 0 0 0 0 0
Upon request: other machine types and mould installation heights, screws, drive powers etc.
All specifications relate to the basic machine version. Deviations are possible depending on variants, process settings
Machine type and material type. Depending on the drive, certain combinations, e.g. max. injection pressure and max. injection flow
may be mutually exclusive.
with EUROMAP size designation ¹ Drive
1) Clamping force (kN) - large injection unit = max. stroke volume (cm³) x max. injection pressure (kbar).
270 S 250-70 | 100 1 | 2 | Accum. 2) Specifications depend on the drive config. – 1st value applies to the lowest clamping force.
270 S 350-70 | 100 | 170 1 | 2 | Accum. 3) Specifications relate to 400 V/50 Hz.
4) Detailed info in the operating instr.
270 S 400-70 | 100 | 170 - | 2 | Accum. [] Specifications apply to alternative equipment.
3
270 S Mould installation dimensions
209 -1
Ø125H7
205
Y
B A
28.5
Ø902)3)
Ø602)3)
Ø18
Ø13
Ø801)
1)
Ø50
30°
8-0.1
21
20
M8-16 deep
15
420
370
65
280
100
M12-24 deep
17.5
52.5
4
Mould installation dimensions 270 S
280
210
110
350
140
70
475
Ø1
70
Ø125H7
270
M12-24 deep
95 Holes for ARBURG
mechanical mould rapid
clamping system 70
Ø14
Ø110H7 [Ø125H7]
140
210
280
350
500
270
448
315
170
404
Ø45
Ø21
65
170
270
315
404
410 430
5
270 S Shot weights
Theoretical shot weights for the most important injection moulding materials
1) average value
ARBURG GmbH + Co KG
Arthur-Hehl-Strasse · 72290 Lossburg · Tel.: +49 7446 33-0 · www.arburg.com · E-Mail: contact@arburg.com
All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual
delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine.
ARBURG GmbH + Co KG
DIN EN ISO 9001 + 14001 + 50001 certified