Professional Documents
Culture Documents
ATTACHMENT REPORT FINAL - Docx1
ATTACHMENT REPORT FINAL - Docx1
11/30/2023
ELECTRICAL & ELE
RVTTI 2023
I
KENYA POWER
RVTTI 2023
II
KENYA POWER
DECLARATION
I, KIBET NGETICH STEPHEN, do hereby declare that this report is my original work and to the
best of my knowledge, it has not been submitted for any certificate award in any polytechnic or
Institution.
Signed___________________________________
Date _____________________________________
KIBET NGETICH STEPHEN
CERTIFICATION
I have read this report and approve it for examination
Signed_______________________________________
Date_________________________________________
MR. OMONDI
RVTTI 2023
III
KENYA POWER
PLAGIARISM DECLARATION
1. I declare that I have read and understood Rift Valley Technical Training Institute
Examination rules and regulations.
2. I do understand that ignorance of these rules and regulations is not an excuse for violation of
the said rules.
3. I understand that I must do my own work.
4. I also understand that if I commit any act of academic dishonesty like plagiarism, my report
can be assigned a fail grade and face the prescribed consequences.
RVTTI 2023
IV
KENYA POWER
DEDICATION
This work is dedicated to the Almighty God for his continued blessings and guidance throughout
the attachment period, much thanks.
Also to my family who have supported me fully through school and during my attachment
session, be blessed.
ACKNOWLEDGEMENT
RVTTI 2023
V
KENYA POWER
I would wish to render my gratitude to my institute supervisor, MR. Omondi for the great
support and direction that she extended, not to mention all the contribution she made towards
facilitating the success of my attachment.
I also extend a lot of appreciation to field supervisors, Mr. Charles Busienei and Miss. Mary
Kariuki who ensured that all facilities necessary for the industrial attachment exercise were at my
disposal. Thanks to the team I was patched with. All their directions, explanations, technical and
intellectual support amounted to the quality experience I gained.
I also wish to the principal and all the staff members of electrical & electronics department of
RVTTI for giving me support and humble time at college.
I thank my family for the emotional and financial support they have given me. Finally, I
acknowledge the support of all my friends, lecturers and classmates.
EXECUTIVE SUMMARY
RVTTI 2023
VI
KENYA POWER
This report contains the details of my industrial attachment at Narok Kenya Power And
Lighting Company, during the attachment period, the lessons learnt, challenges faced and
recommendations while on attachment. It is mandatory for everyone to undertake an
attachment session as it provides one to apply the skills learnt at the college. It is also an opportunity
for one to learn new skills.
TABLE OF CONTENTS
RVTTI 2023
VII
KENYA POWER
DECLARATION II
PLAGIARISM III
DEDICATION IV
ACKNOWLEDGEMENT V
EXECUTIVE SUMMARY VI
LIST OF FIGURES IX
LIST OF ABREVIATIONS/ACRONYMS X
LIST OF TABLES
RVTTI 2023
VIII
KENYA POWER
CHART 1.0: Formula of Power, Voltage, Current and
Resistance Source: Author (2023)
LIST OF FIGURES
RVTTI 2023
IX
KENYA POWER
BLOCK ARROW
BLOCK ARC
LIST OF ABREVIATIONS/ACRONYMS
RVTTI 2023
X
KENYA POWER
AC Alternating current/voltage
Kv Kilo-volts
Kva Kilo-volt-amperes
Kw Kilowatts
KWH Kilo Watt Hour
RVTTI Rift Valley Technical Training Institute
RVTTI 2023
KENYA POWER
PHOTO GALLARY
RVTTI 2023
12
KENYA POWER
CHAPTER ONE
1.0 INTRODUCTION
1.1 PURPOSE
It is mandatory for everyone to undertake an attachment session as it provides one to apply the skills
learnt at the college.
It is also an opportunity for one to learn new skills.
1.2 SCOPE AND LIMITATION
Kenya power has different operational structures depending on the population of the region on
which operations are to be undertaken. I was attached at Narok branch which is located at a town
called Narok in Narok county, rift valley province, Kenya.
Owing to the size of the region the branch operated in the following sub-departments
1. Development and construction department (D&C dept)
2. Emergency department
3. Mains department
4. Customer care
5. Metering department
6. Meter reading department
7. Survey department
8. Business development department
RVTTI 2023
13
KENYA POWER
1.2.1 EMERGENCY DEPARTMENT
According to the chores assigned to each departments, a lot of electrical and electronics tasks
were embedded in the Emergency department. Was thus assigned to a three days a week shift
daylight team that facilitated all the experience I gained in the field.
The role of Emergency department and the teams is to ensure that there is consistence supply of
electricity as well as provide public safety and health by addressing different emergencies. Some
of these agencies exist solely for addressing certain types of emergencies whilst others deal with
ad hoc emergencies as part of their normal responsibilities. Kenya power engages in community
awareness and prevention programs to help the public avoid, detect, and report emergencies
effectively.
Emergency department and the teams operated on a 24 hours basis but in shifts. Every
call from a customer is recorded and printed then handed to workers who work in shifts
throughout the day and night. The main duties of the emergency services include:
RVTTI 2023
14
KENYA POWER
1.2 KENYA POWER AND LIGHTING COMPANY
In the business and shareholding perspective of the company, Kenya has listed
Mama Ngina Kenyatta as its fourth largest individual investor, with 2.2 million shares or
a 0.11 per cent stake in the company, whose ownership is dominated by institutional
investors like the Treasury and National Social Security Fund (NSSF).
RVTTI 2023
15
KENYA POWER
1.3.2 ORGANISATIONAL STRUCTURE
General
Managers
Chief
Managers
Officers
RVTTI 2023
16
KENYA POWER
1.3.4 KENYA POWER QUALITY POLICY
KENYA POWER is committed to providing high quality customer service by efficiently
transmitting and distributing high quality electricity that is safe, adequate and reliable at cost
effective tariffs
1.3.5 COMPANY’S VISION
provide world class power that delights our customers.
1.3.6 COMPANY’S MISSION
To Powering people for better lives
1.3.7 COMPANY’S OBJECTIVES
To buy efficiently and wisely, obtaining by an ethical means the best value for every
shilling spent.
To maintain cordial relationship with other department for the overall benefit of the
organization.
To develop staff policies, procedures and organization to ensure the achievement of set
objectives.
To help add value to the development of services rendered
To supply the organization with a flow of materials and services to meet its needs.
To ensure continuity of supply by maintaining effective relationship with existing sources
to meet emerging or planned needs.
To develop specification in collaboration with user to ensure standardization is achieved.
RVTTI 2023
17
KENYA POWER
1.3.8 PUBLIC RIGHTS IN THE KENYA POWER COMPANY
Timely service and accurate information.
Protection from harm or injury within the company services.
Dignified, courteous, confidential and continuous care.
Participation, planning and management of company resources.
1.3.9 COMPANY’S CORE VALUES
Kenya Power core values signify:
Customer First
One Team
Passion
Integrity
Excellence
RVTTI 2023
18
KENYA POWER
CHAPTER TWO
2.0 PROJECT BACKGROUND
2.2 OBJECTIVES
To enable trainees get hand-on/real life experiences they are expected to work in when
they graduate.
To provide an opportunity for trainees and trainers to interact with in stake holders and
potential employers and thus appreciate field situations.
To provide an opportunity for trainees to apply the principles and techniques
theoretically learnt while in college to real-life problem solving situations.
To give an opportunity for trainees to understand work ethics, employment demands,
responsibilities and opportunities.
To enhance and strengthens linkages between Rift Valley Technical Training Institute
and other stakeholders.
RVTTI 2023
19
KENYA POWER
CHAPTER THREE
3.0 MAJOR ACTIVITIES
3.0.1 POWER GENERATION
Hydro-power constitutes around 60 per cent of the total electricity generated in Kenya. The bulk
of this electricity is ta pped from five generating plants along the River Tana. The five stations
combined - Kindaruma, Kamburu, Gitaru, Masinga and Kiambere - have an installed capacity of
more than 400 MW. Turkwel Gorge Power Station in north-western Kenya has an installed
capacity of 106 MW. There are also several small hydro stations - Mesco, Ndula, Wanjii, Tana,
Gogo Falls and Selby Falls - all built before independence in 1963, with a combined generation
output of 40 MW.
Geothermal energy is generated using natural steam tapped from volcanic-active
zones in the Rift Valley. Some 127 MW is fed into the national grid from three plants
located at Olkaria. Thermal (fuel-generated) energy is generated in power stations at
Mombasa and Nairobi. Kenya Electricity Generating Company Limited, KenGen is the
leading electric power generation company in Kenya, producing about 80 percent of
electricity consumed in the country. The company utilizes various sources to generate
electricity ranging from hydro, geothermal, thermal and wind. Hydro is the leading
source, with an installed capacity of 677.3MW, which is 72.3 per cent of the company’s
installed capacity.
KenGen is in direct competition with four Independent Power Producers who
between them produce about 18 percent of the country’s electric power. KenGen has a
workforce of 1,500 staff located at different power plants in the country. With its wealth
of experience, established corporate base and a clear vision, the company intends to
maintain leadership in the liberalised electric energy sub-sector in Kenya and the Eastern
RVTTI 2023
20
KENYA POWER
Africa Region. KenGen Headquarters are located at Stima Plaza Phase III, Kolobot Road,
Parklands; Nairobi.
3.0.2 TRANSMISSION
RVTTI 2023
21
KENYA POWER
transmission lines are also in use. The national grid impacts on the future growth of the energy
sector because any new generation capacity must take into consideration the existing network
and its capacity to handle new loads.
The main components of high-voltage Electricity transmission lines and associated
facilities
1) Transmission Pylons (Towers)
2) Conductors (Transmission lines)
3) Right-of-Way (Way leaves)
4) Access Roads
5) Substations
1. Transmission Pylons (Towers)
Transmission pylons are the most visible component of the Electricity transmission system.
Pylons support high-voltage conductors (cables that transmit the electricity, otherwise known as
lines) above the ground and separate them from other lines, buildings, and people. Pylons vary in
design and dimensions. The transmission pylons are lattice steel between 33.5 and 46 meters tall.
A minimum of 30-metre right-of-way is needed for the area around the pylons and the spans
between the pylons.
RVTTI 2023
22
KENYA POWER
3. RIGHT-OF-WAY (Way Leaves)
The right-of-way for a transmission corridor includes the land set aside for the transmission line
and associated facilities, and land set aside for a safety margin between the line and nearby
structures and vegetation. Having the safety margin helps avoid the risk of fire and other
accidents. The right-of-way width needed for transmission lines ranges from 30 meters to 65
meters. The right-of-way is also used for access roads.
Vegetation that could pose a danger to a transmisssion line or tower is removed inside the right-
of-way and outside the right-of-way if it could come too close to lines and pylons.
4. ACCESS ROADS
Access is needed to the transmission tower sites for both line construction and maintenance.
Grading and clearing vegetation may be required for access road construction. Roads are usually
murram. Access roads can be permanent or temporary depending on the need during construction
and land use. On most rights-of-way, permanent access roads provide a way to repair and
maintain the pylons and line and are available for emergencies.
In farmland and other areas where the existing land use is not compatible with a permanent
access road, Kenya power uses temporary access roads during construction, then removes the
roads and replants or otherwise restores the original land use.
5. SUB-STATIONS
The high voltages used for Electricity transmission (e.g., 500 kV) are converted for consumer
use to lower voltages (e.g., 11 kV) at substations. Substations vary in size and configuration but
may cover several acres, and are cleared of vegetation and surfaced with gravel. Access is
limited to authorized personnel and the substation is fenced and gated for safety and security. In
general, substations include a variety of structures, conductors, fencing, lighting, and other
features that result in an "industrial" appearance.
RVTTI 2023
23
KENYA POWER
RVTTI 2023
24
KENYA POWER
3.1 LESSONS LEARNT
3.1.1 SUBSTATIONS/TRANSFORMERS
RVTTI 2023
25
KENYA POWER
Introduction
Electrical transformers are used to "transform" voltage from one level to another, usually from a
higher voltage to a lower voltage. They do this by applying the principle of magnetic induction
between coils to convert voltage and/or current levels.
In this way, electrical transformers are a passive device which transforms alternating current
(otherwise known as "AC") electric energy from one circuit into another through electromagnetic
induction. An electrical transformer normally consists of a ferromagnetic core and two or more
coils called "windings". A changing current in the primary winding creates an alternating
magnetic field in the core. In turn, the core multiplies this field and couples the most of the flux
through the secondary transformer windings. This in turn induces alternating voltage (or emf) in
each of the secondary coils.
Workability
RVTTI 2023
26
KENYA POWER
secondary windings. Output choices include AC or DC. For Alternating Current waveform
output, voltage the values are typically given in RMS values.
Cores can be constructed as either a toroidal or laminated. Toroidal units typically have copper
wire wrapped around a cylindrical core so the magnetic flux, which occurs within the coil,
doesn't leak out, the coil efficiency is good, and the magnetic flux has little influence on other
components. Laminated refers to the laminated-steel cores. These steel laminations are insulated
with a no conducting material, such as varnish, and then formed into a core that reduces
electrical losses. There are many types. These include autotransformer, control, current,
distribution, general-purpose, instrument, isolation, potential (voltage), power, step-up, and step-
down. Mountings include chassis mount, dish or disk mount, enclosure or free standing, h frame,
and PCB mount.
RVTTI 2023
27
KENYA POWER
RVTTI 2023
28
KENYA POWER
RVTTI 2023
29
KENYA POWER
In the transformer
The Transformer Oil
The Copper Windings
Blades
And Copper Cables at the transformer/earth mat
Other Threats
Vandalism of tower members
RVTTI 2023
30
KENYA POWER
Conductor theft
Armed robbery
Meter tampering
Illegal connections
3.2.1 CONDUCTOR THEFT
KENYA POWER as one of the largest users of electrical conductors is faced with large scale
conductor theft. Investigations have revealed that 99% of cable stolen from KENYA POWER is
sold to scrap dealers throughout the country. Both aluminum and copper are highly sought after
in the scrap market with copper being the more desirable of the two due to its much higher price
in the market.
GENERAL EFFECTS AS A RESULT OF VANDALISM AND THEFT
Replacement of the damaged installations by new ones
Failure of maintenance and construction of new lines
KENYA POWER spends more money in buying extra
Materials to meet both maintenance and new jobs
Few customers access to electricity. Only about 10% of the population has electricity
RVTTI 2023
31
KENYA POWER
Tower members for beds, smelted, scrap market
2. MISCHIEF BEHAVIOURS
shooting at glass insulators
Sabotage?
ignorance
IMPACT OF VANDALISM ON THE COMPANY
Outages
Funds wasted on repairs rather than new projects
Revenue loss
Equipment damage
Supply insecurity
Adversely affects maintenance
Poor supply reliability
Loss of lives
Project delays
Diversion of effort & resource away from core business
Increased project costs
RVTTI 2023
32
KENYA POWER
Indirect costs such as
Legal
Consequential
Poor image
Loss of perishables
Loss of business
3.2.2 OBSERVED COMPANY FAILURES
1. MONOPOLY
Kenya power being a monopoly in power transmission and distribution in some instances
tends not to be sensitive on the customer’s needs. This is evident mainly on the many
delays in installation and emergency responses.
2. EMPLOYEES MALPRACTICES
In ethical malpractices by employees who steal the company assets mainly the cables.
3. ILLEGAL CONNECTIONS
Most illegal connections leads to dramatic losses because it is poorly done by non
qualified persons.
4. INSTALLATION COSTS
High costs of installation that leads to many households not being able to acquire
electricity.
5. POOR SUPERVISION
Lack of proper supervision of the employees
DESIGN CONSIDERATIONS
RVTTI 2023
33
KENYA POWER
deployment of tubular pylons
embossing/branding of materials
polymer insulators
HV distribution network
contract
OPERATIONAL CONSIDERATIONS
CHAPTER FOUR
4.0 CONCLUSION
RVTTI 2023
34
KENYA POWER
Doing my attachment at Kenya power was the best decision to make as I acquired a lot of
experience and knowledge learned in class as theories. It was a structured, credit-bearing work
experience in my professional work setting during which i applied and acquired knowledge and
skills. It involved the application of learned skills in an organization related to me major. The
Industrial Attachment challenged me to examine the values of the organization involved in the
experience, and to assess my education as it relates to the Industrial Attachment.
Other benefits I gained from the Industrial Attachment include
4.1 SUMMARY
RVTTI 2023
35
KENYA POWER
4.2 RECOMMENDATIONS
There are needs to formulate, enforce and review environmental, health, safety and
quality codes and standards, set, review and adjust electric power tariffs, approve
power purchase and network service contracts, examine and approve meters,
investigate complaints between parties, accredit energy auditors, ensure competition,
RVTTI 2023
36
KENYA POWER
collect and maintain energy data, protect stakeholders interests, and prepare an
indicative national energy plan.
CHAPTER FIVE
5.0 REFERENCES
[1] Kioko R. (2012) Last Mile Electricity financing. Kenya Economic Survey,
2013-2022
[2] www.kplc.co.ke
RVTTI 2023
37
KENYA POWER
Once more I appreciate all the people including my field supervisor, workmates and most
importantly my school supervisor, Mr. Omondi, who assisted me and gave me all the
guidance necessary to achieve the objectives
THANK YOU
RVTTI 2023