Professional Documents
Culture Documents
Mid-Sem Test (16 December 2022, Friday)
Mid-Sem Test (16 December 2022, Friday)
Home / My courses / KIG1011 / Week 8 [Mid-Sem Test] / Mid-Sem Test (16 December 2022, Friday)
Question 1
Not yet answered
Which of the following is found out by calculating the area under the stress strain graph?
Select one:
A. Resilience
B. Strength
C. Hardness
D. Toughness
Clear my choice
Question 2
Not yet answered
Select one:
A. 0.74
B. 1.633
C. 0.68
D. 0.52
Clear my choice
Question 3
Not yet answered
Select one:
A. C
B. W
C. Ni
D. H
Clear my choice
https://spectrum.um.edu.my/mod/quiz/attempt.php?attempt=1240281&cmid=657605 1/14
12/16/22, 9:59 AM Mid-Sem Test (16 December 2022, Friday)
Question 4
Not yet answered
Select one:
A. BCC
C. HCP
D. FCC
Clear my choice
Question 5
Not yet answered
Select one:
A. Point defect
B. Line defect
C. Chemical defect
D. Plane defect
Clear my choice
Question 6
Not yet answered
Select one:
A. m2 s-2
B. m2 s2
C. m2 s1
D. m2 s-1
Clear my choice
https://spectrum.um.edu.my/mod/quiz/attempt.php?attempt=1240281&cmid=657605 2/14
12/16/22, 9:59 AM Mid-Sem Test (16 December 2022, Friday)
Question 7
Not yet answered
Select one:
A. moles m-3 s-1
C. atoms m2 s-1
Clear my choice
Question 8
Not yet answered
Select one:
A. X-ray Diffraction Technique
B. Metallurgical microscope
C. Optical microscope
D. Naked eye
Clear my choice
Question 9
Not yet answered
Select one:
A. 70% copper and 30% tin
Clear my choice
https://spectrum.um.edu.my/mod/quiz/attempt.php?attempt=1240281&cmid=657605 3/14
12/16/22, 9:59 AM Mid-Sem Test (16 December 2022, Friday)
Question 10
Not yet answered
Select one:
A. Has its atoms distributed in a random pattern
Clear my choice
Question 11
Not yet answered
Select one:
A. Surface carburizing treatment
B. Sharp corner
C. Rough surfaces
D. Corrosion
Clear my choice
Question 12
Not yet answered
Select one:
A. All of the above
B. Have the same orientation and their similar faces are parallel
C. May be defined as the smallest parallelepiped which could be transposed in three coordinate directions to build up
the space lattice
D. Contain the smallest number of atoms which when taken together have all the properties of the crystals of the
particular metal
Clear my choice
https://spectrum.um.edu.my/mod/quiz/attempt.php?attempt=1240281&cmid=657605 4/14
12/16/22, 9:59 AM Mid-Sem Test (16 December 2022, Friday)
Question 13
Not yet answered
Select one:
A. after mechanical working
Clear my choice
Question 14
Not yet answered
If there are 400 grains per square inch on a photomicrograph of a ceramic material taken at 200X, what is the ASTM grain-size
number of the material?
Select one:
A. 6.64
B. 7.64
C. 10.64
D. 11.64
Clear my choice
Question 15
Not yet answered
The dependence of diffusion coefficient on temperature in a certain temperature range is described by __________.
Select one:
A. D = D0 exp (Q4/RT)
B. D = D0 exp (Q/T)
C. D = D0 exp (-Q/RT)
D. D = D0 exp (–Q2/RT)
Clear my choice
https://spectrum.um.edu.my/mod/quiz/attempt.php?attempt=1240281&cmid=657605 5/14
12/16/22, 9:59 AM Mid-Sem Test (16 December 2022, Friday)
Question 16
Not yet answered
The ability of the material to withstand tensile force, without breaking, is known as ______.
Select one:
A. Compressive strength
B. Yield strength
C. Tensile strength
D. Creep strength
Clear my choice
Question 17
Not yet answered
If the Brinell hardness of a steel specimen is measured 149 HBN. What will be the Ultimate Tensile Strength?
Select one:
A. 431 MPa
B. 608 MPa
C. 514 MPa
D. 637 MPa
Clear my choice
Question 18
Not yet answered
The defect which takes place due to imperfect packing of atoms during crystallization is known as __________.
Select one:
A. none of the above
B. line defect
C. surface defect
D. point defect
Clear my choice
https://spectrum.um.edu.my/mod/quiz/attempt.php?attempt=1240281&cmid=657605 6/14
12/16/22, 9:59 AM Mid-Sem Test (16 December 2022, Friday)
Question 19
Not yet answered
Select one:
A. Smooth
C. Plate like
E. Flat
Clear my choice
Question 20
Not yet answered
What happens after the maximum strength is achieved by the aging process for Aluminum alloys?
Select one:
A. Precipitate hardening
B. Over-aging
D. Age hardening
E. Natural ageing
Clear my choice
Question 21
Not yet answered
Select one:
A. Ultimate Tensile Strength increases with an increase in grain size.
B. With an increase in the degree of cold working, Ultimate Tensile Strength increases.
C. Larger the difference between the radius of solute and solvent atoms of alloy, higher is the tensile strength.
Clear my choice
https://spectrum.um.edu.my/mod/quiz/attempt.php?attempt=1240281&cmid=657605 7/14
12/16/22, 9:59 AM Mid-Sem Test (16 December 2022, Friday)
Question 22
Not yet answered
Select one:
A. Optical microscope
B. Naked eye
D. Metallurgical microscope
Clear my choice
Question 23
Not yet answered
Select one:
A. Substitutional solution
B. Intermetallic compound
Clear my choice
Question 24
Not yet answered
_____ occurs when metal is subjected to a constant tensile load at an elevated temperature.
Select one:
A. Fatigue
B. Creep
C. Impact
D. Wear
Clear my choice
https://spectrum.um.edu.my/mod/quiz/attempt.php?attempt=1240281&cmid=657605 8/14
12/16/22, 9:59 AM Mid-Sem Test (16 December 2022, Friday)
Question 25
Not yet answered
Select one:
A. Fixed structure at all temperatures
Clear my choice
Question 26
Not yet answered
The correct order of coordination number for BCC and FCC unit cells is __________, respectively.
Select one:
A. 6 and 8
B. 12 and 8
C. 8 and 12
D. 6 and 12
Clear my choice
Question 27
Not yet answered
The ratio of the volume occupied by the atoms to the total volume of the unit cell is called __________.
Select one:
A. Coordination number
B. Space lattice
Clear my choice
https://spectrum.um.edu.my/mod/quiz/attempt.php?attempt=1240281&cmid=657605 9/14
12/16/22, 9:59 AM Mid-Sem Test (16 December 2022, Friday)
Question 28
Not yet answered
Select one:
A. Nucleation of crack
B. Growth of crack
E. Coalescence of cracks
Clear my choice
Question 29
Not yet answered
Select one:
A. 10
B. 8
C. 16
D. 12
Clear my choice
Question 30
Not yet answered
Select one:
A. the temperature of solid solution is sufficiently high.
Clear my choice
https://spectrum.um.edu.my/mod/quiz/attempt.php?attempt=1240281&cmid=657605 10/14
12/16/22, 9:59 AM Mid-Sem Test (16 December 2022, Friday)
Question 31
Not yet answered
Select one:
A. Grain refinement
C. Cold working
D. Alloying
E. Temperature rise
Clear my choice
Question 32
Not yet answered
Select one:
A. steady state conditions of mass flow
Clear my choice
Question 33
Not yet answered
Select one:
A. none of the above
D. in which there is no definite atomic structure and atoms exist in a random pattern just as in a liquid
Clear my choice
https://spectrum.um.edu.my/mod/quiz/attempt.php?attempt=1240281&cmid=657605 11/14
12/16/22, 9:59 AM Mid-Sem Test (16 December 2022, Friday)
Question 34
Not yet answered
Select one:
A. lead
B. glass
C. silver
D. brass
Clear my choice
Question 35
Not yet answered
In comparison to lattice diffusion, the activation energy for diffusion along surfaces and grain boundaries is
Select one:
A. infinite
B. higher
C. almost negligible
D. lower
Clear my choice
Question 36
Not yet answered
A cylindrical specimen having a diameter of 12.8 mm at starting of tensile test and 7.3 mm at the fracture point. What is the
ductility?
Select one:
A. 64%
B. 67%
D. 78%
E. 56%
Clear my choice
https://spectrum.um.edu.my/mod/quiz/attempt.php?attempt=1240281&cmid=657605 12/14
12/16/22, 9:59 AM Mid-Sem Test (16 December 2022, Friday)
Question 37
Not yet answered
Select one:
A. Type of dislocation
B. None
C. Length of dislocation
Clear my choice
Question 38
Not yet answered
Select one:
A. Tensile Strength
B. Fracture point
C. Elastic limit
D. Yield point
Clear my choice
Question 39
Not yet answered
The ascending order of evolution of materials used for making the cutting tools is __________.
Select one:
A. bronze – stone – steel – iron
Clear my choice
https://spectrum.um.edu.my/mod/quiz/attempt.php?attempt=1240281&cmid=657605 13/14
12/16/22, 9:59 AM Mid-Sem Test (16 December 2022, Friday)
Question 40
Not yet answered
Select one:
A. Stress is inversely proportional to square of strain
Clear my choice
◄ Tutorial 4
Jump to...
https://spectrum.um.edu.my/mod/quiz/attempt.php?attempt=1240281&cmid=657605 14/14