Professional Documents
Culture Documents
Report of Maintenance 001-Investigation of Leaking Pipe On E3 AD Column DA CMB 1
Report of Maintenance 001-Investigation of Leaking Pipe On E3 AD Column DA CMB 1
History
Menindak lanjuti laporan produksi mengenai adanya laporan tentang kebocoran dan karat pada pipa di exchanger E3,
kolom AD1 bagian DA CMB 1 yang diduga disebabkan oleh adanya pemakaian pipa yang tidak sesuai dengan spesifikasi
di RAB yaitu dimensi dan jenis materialnya.
(Follow up the production report regarding leak and rusty on pipe of the E3 exchanger, AD 1 column at the DA CMB 1 that
suspected cause by the use of pipes that are not in accordance with the specifications in the BOQ (Bill of quantity), that is the
dimensions and type of materials).
Result
1. Hasil pengetesan dengan menggunakan "cairan pembeda material stainless steel" bisa dilihat di lampiran 1, poin A.
Details testing result by using "Distinguish liquid stainless steel material". Attachment 1, point A.
2. Hasil pengukuran dimensi pipa ditemukan 2 pipa yang ukurannya jauh berbeda. Lampiran 1, poin B.
The results of measuring pipe dimensions found 2 pipes have different sizes. Attachment 2, point A.
3. Ditemukannya titik titik erosi pada sebagian besar pipa (sekitar 70%) dengan perkiraan kedalaman 0.2 mm,
bisa dilihat di lampiran 1, poin B. / Found erosion points on most pipes (about 70%) with an estimated depth of 0.2 mm.
Attachment 1, point B.
4. Kebocoran pada pipa exchanger disebabkan oleh erosi pada pipa yang disebabkan oleh material yg tidak sesuai.
Leaks are caused by erosion in pipes caused by inappropriate materials.
Conclusion
Material pipa yang digunakan untuk perbaikan exchanger E3 kolom AD1 Produksi bagian DACMB1.
"Diduga menggunakan material SUS 304" baik untuk pipa dengan ukuran sesuai spesifikasi (sejumlah 34 batang)
maupun pipa yang tidak sesuai spesifikasi (sejumlah 2 batang).
Pipe material used for repair exchanger E3 column AD1 Production part DACMB1. " Suspected of using SUS 304 material "
both for pipes with sizes according to specifications (a number of 34 rods) and
pipes that do not match specifications (a number of 2 rods).
2. Direkomendasikan untuk retubing ulang exchanger E3 dengan pipa yang sesuai yaitu SUS316 ukuran 1/2inch seamless
dikarenakan lebih dari 70% terdapat titik erosi pada pipa exchanger *.
It is recommended to retubing the E3 exchanger with a suitable pipe that is SUS316 size 1/2inch seamless because
more than 70% there are any erosion points on the exchanger pipe *.
* Langkah perbaikan cepat : Pihak vendor (MKSP) sedang mengganti 2 batang pipa yang bocor dengan pipa yg sesuai spesifikasi