Professional Documents
Culture Documents
Nokia SRAN BTS - 5G NB AMIA Install - Connection Overview Ed1.0 20w06.3a
Nokia SRAN BTS - 5G NB AMIA Install - Connection Overview Ed1.0 20w06.3a
SRAN 5G
• DC-Bridge.
Width (19’’) 447 mm (17.6 in) The AirScale Subrack AMIA includes:
• Subrack frame
Empty (w/o blind covers) 5.1 kg (11.2 lb)
• Backplane for high bandwidth interconnect between
Weight with dummy panels 6.8 kg (15 lb) • AirScale Common and
• AirScale Capacity plug-in units
with all units 23.9 kg (52.7 lb)
• Fans with changeable airflow direction (by rotating fans).
• Default direction is front-to-back.
5 © 2017 Nokia Nokia Internal Use • Blind-units to prevent cooling airflow leakage
System Module
AMIA Installation
AirScale System Module - AMIA Installing and Cabling Manual
Installing AMIA
SRAN 5G
10 © 2017 Nokia <Document ID: change ID in footer or remove> <Change information classification in footer>
gNB-DU in 5G18A:
AirScale System Module Indoor • Maximal configuration: 1x ASIK + 1 ABIL
ASIK, ABIL, AMIA gNB-DU in 5G19:
• Minimal configuration: 1x ASIK + 1 ABIL
ASIK & ABIL high capacity introduction • Maximal configuration: 1x ASIK + 3 ABIL
ASIK functions:
• L2 non-Real Time processing,
• L3 Transport interfacing (Ethernet)
• Local O&M
• Synchronization
• Power feed
RESET SIN SERVICE
DC EAC SOUT LMP SEI EIF-1 EIF-2
ASIK 474021A:
AirScale Common Plug-in Unit version K
ASIK functions:
• L2 non-Real Time processing,
• L3 Transport interfacing (Ethernet)
• Local O&M
• Synchronization
• Power feed
RESET SIN SERVICE
DC EAC SOUT LMP SEI EIF-1 EIF-2
13 © 2017 Nokia
AirScale 5G system module capacity plug-in unit front view and external interfaces
ABIL 474020A:
AirScale Capacity Plug-in Unit version L
ABIL
S-RFIF1 S-RFIF2 Q-RFIF1 Q-RFIF2
SFP+ / SFP+ / QSFP+ / QSFP+ / S-RF1 Q-RF1
SFP28 SFP28 QSFP28 QSFP28 S-RF2 Q-RF2
# of ABIL
Signal Connector Description
Interfaces
RF-n (QSFP) / 2 QSFP+/28 Low Latency Fronthaul connection to CPRI or Ethernet radios.
Q-RFIFn ABIL shall support CPRI10.1376Gbps and 24.33024Gbps rate + 10GE and 25GE Ethernet protocols.
Optical CPRI10.1 to RF up to 10km (HW capability).
One QSFP connector has four CPRI/Ethernet links.
Remark: Only QSFP+ (4x CPRI 9.8 Gbps per each port)
RF-n (SFP) / 2 SFP+/SFP28 Low Latency Fronthaul connection to Ethernet radios.
S-RFIFn Support for 10GE and 25GE protocols
Remark: eCPRI 10/25 GE per each port available in 5G19
LEDs 5 Visual indication of status
ABIL functions:
• L1 + L2 RT processing in gNB-DU
• RF interfaces to RU. Up to 2x 3rd generation radios
14 © 2017 Nokia
AirScale 5G Modules