AKG Steel Industries
8-09, Sclr Bt, Nelda, Phase 2, U?-201305 (NDIA)
fe “Tal: 0120-4523400, mall: lgsteecondute@akastelnd com
Website: ww ckgsteeind com
a
—y eSB Ss
TECHNICAL DATA SHEET
Manufacturer. : AKG Steel Industries
Standard +15 9537 Part-ll-1981
size 20 mm ERW Rigid Steel Conduit Pipe
Protection _: Medium Protection
Raw material: Mild Steel
Date :27,09,2022
SI. No. | Characteristics/ Tests ‘Value Specification
1 | Make
2_ | Material Type Heavy duty suitable for heavy mechanical stresses, Medium Protection
3_| Durability of Marking Marking shall be durable & legible (Clause No. 6.0)
4 | Material Coating
a) _| inside Surface ‘Stove Enameled Paint
b) | Outside Surface Stove Enameled Paint
3 | Standard Length 3 Meters (Clause No.7.1)
‘LA to 1.8 mm (Clause No. 7.1)
6 | Wall Thickness
[As 16 sw]
7_ [Outer Diameter 20mm (Tolerance: - 0.3mm), (Clause No. 7.1)
8 | Thread Length iS£imm
9 | Bending Test Shall show no crack & ball of appropriate gauge shall pass easily
(Clause No. 9.2)
Difference in outside diameter before and after applying force of|
1250N shall not exceed by 10%. (Clause No. 9.3)
AKG 15:9537 Part-ll
INDIA
20mm _CM/L-8870602
10 | Compression Test
a1_| Applicable Standard,
Marking with CM/LNo.
Manufacturer” : AKG Steel Industries For Al
Client : SCON Projects Pvt Ltd
Project FB Project (autAKG Steel Industries
99, Sectr 8, Nid, Phase-2, U.P 201906 (NDIA)
“Tol.: 0120-4623400, Emall: akgsteeioonduits@akgeteelind.com
Webste yontahgstain com
TECHNICAL DATA SHEET
Manufacturer: AKG Steel Industries
standard 18 9537 Part-II-1981
size 25 mm ERW Rigid Steel Conduit Pipe
Protection _: Medium Protection
Raw material: Mild Stee!
Date 27.09.2022
SI. No. | Characteristics/ Tests Value Specification
1 | Make
2_| Material Type Heavy duty suitable for heavy mechanical stresses, Medium Protection
3 _| Durability of Marking Marking shall be durable & legible (Clause No. 6.0)
4 _ | Material Coating
a) _| Inside Surface Stove Enameled Paint
b) _ | Outside Surface ‘Stove Enameled Paint
5 _| Standard Length 3 Meters (Clause No.7.1)
1.4 to 1.8 mm (Clause No. 7.1)
6 | Wall Thickness
[As 16 swe]
7_| Outer Diameter 25 mm (Tolerance :-0.4mm), (Clause No. 7-1)
@ _| Thread Length 9£imm
‘2 | Bending Test Shall show no crack & ball of appropriate gauge shall pass easily
(Clause No. 9.2)
at lesen res Difference in outside diameter before and after applying force ofF
1250N shall not exceed by 10%. (Clause No. 9.3)
Applicable Standard, AG ~ Bess7 Pare ll
41 | Marking with CM/LNo, | INDIA
25mm__ CM/L-8870602
Manufacturer: AKG Steel Industries For
Client SCON Projects Pvt Ltd
Project
FB ProjectAKG Steel Industries
8-30, Saior-81, Noda, Phase2,UP-201905 (NDIA)
Tol: 01204523400, Ema abgsteeconduts@agsleling com
Website: wowaigstotn com
TECHNICAL DATA SHEET
Manufacturer: AKG Steel Industries
Size 32 mm ERW Rigid Steel Conduit Pipe
Standard: 18 9537 Part
Protection _: Medium Protection
Raw material: Mild Steel
Date :27,08.2022
SI.No. | Characteristics/ Tests Value Specification
1 [Make
2__| Material Type Heavy duty suitable for heavy mechanical stresses, Medium Protection
3__| Durability of Marking Marking shall be durable & legible (Clause No. 6.0)
4 | Material Coating
a] _ | Inside Surface ‘Stove Enameled Paint
by _ | Outside Surface Stove Enameled Paint
5 _ | Standard Length 3Meters (ClauseNo71)
1.4 to 1.8 mm (Clause No, 7.1)
6 | Wall Thickness
[As 16 SWG]
7_ | Outer Diameter 32mm (Tolerance :-0.4mm), (Clause No. 7-4)
8 | Thread Length 19£imm
Bending Test NTA
10 | Compression Test Difference in outside diameter before and after applying force of
1250N shall not exceed by 10%. (Clause No. 9.3)
‘Applicable Standard, AKG 18:9537 Part-ll
= INDIA
Marking with CM/L No. Gsn
32mm __CM/L-8870602 =
Manufacturer: AKG Steel Industries
Client + SCON Projects Pvt Ltd
Project
: IFB Project feg/Signatory)= A
Manufacturer; AKG Steel Industries
Standard 1S 9537 PartlI-1981
Size
Protection: Medium Protection
Raw material: Mild Steel
Date 27.09.2022
e
ro ste State Ses
‘eata
AKG Steel Industries
5-20, Sect -01, Nl, Phase, UP-201506 (NDIA)
“el: 0120457340, Email sbgsteslcondutsekgseling com
Webster waka com
TECHNICAL DATA SHEET
40 mm ERW Rigid Steel Conduit Pipe
SI. No. | Characteristies/ Tests
Value Specification
1__| Make
2_| Material Type
Heavy duty suitable for heavy mechanical stresses, Medium Protection
3_| Durability of Marking
Marking shall be durable & legible (Clause No. 6.0)
4 _| Material Coating
a) _| Inside Surface
Stove Enameled Paint
b) _ | Outside Surface
Stove Enameled Paint
5 _ | Standard Length
3 Meters (Clause No.7.1)
6 | Wall Thickness
1.6 to 2.2 mm (Clause No. 7.1)
[As per 145WG]
‘Outer Diameter
40 mm (Tolerance: - 0.4mm), (Clause No. 7.1)
Thread Length
19=imm
Bending Test
N/A
10 | Compression Test
Difference In outside diameter before and after applying force of
1250N shall not exceed by 10%. (Clause No. 9.3)
Applicable Standard,
AKG 1S:9537 Part-il
11 | parking with cM/LNo, | INDIA
40mm CM/L-8870602
Manufacturer AKG Steel Industries
Client + SCON Projects Pvt Ltd
Project + IFB ProjectAKG Steel Industries
AIKIG nik J 859, Selo Bt, Noid, Phase-2,U.P-201905 (NDIA)
Ta: 0120482840, Ema ehgslekondulsaigseend com
=. Website wo shgsieindcan
Nee
TECHNICAL DATA SHEET
Manufacturer. : AKG Steel Industries
Standard 1S 9537 Part-II-1981
Size 50 mm ERW Rigid Steel Conduit Pipe
Protection __ : Medium Protection
Raw material: Mild Steel
Date 2 27.09.2022
SI. No. | Characteristics/ Tests
[1_| Make
[27 | Material Tyee Heavy duty suitable for heavy mechanical stresses, Medium Protection
3 _| Durability of Marking Marking shall be durable & legible (Clause No. 6.0)
4 | Material Coating
a) _| Inside Surface Stove Enameled Paint
b) | Outside Surface Stove Enameled Paint
5 | Standard Length 3 Meters (Clause No.7.1)
1.6 to 2.2mm (Clause No. 7.1)
[As per 1456]
6 | Wall Thickness
7__| Outer Diameter ‘50 mm (Tolerance: -0.5mm), (Clause No. 7.1)
Thread Length 22£1mm
Bending Test N/A
Difference in outside diameter after applying force of 1250 N shall not
10. | compression Test
e exceed by 10%. (Clause No. 9.3)
, AKG —_1S:9537 Part-
Marking with CM/LNo, | INDIA GEESE
SOmm CM/L-8870602
Manufacturer: AKG Steel Industries
ut
Client + SCON Projects Pvt Ltd
Project : FB ProjectAKG Steel Industries
8.38, Sector -81, Noa, Phase-2, LP-201905 (NDIA)
‘Tel: 0120-4573400, Emal: agstsioondulsak
‘Wiebst: wnwakgletnd com
TECHNICAL DATA SHEET
Manufacturer: AKG Stee! Industries
Standard 15.9537 Part-tI-1981
Size : 20 mm Hot Dip GI Rigid Steel Conduit Pipe
Protection _: High Protection ~ Hot Dip Galvanized
Raw material: Mild Steel
Date 27.09.2022
Si, | Characteristics/ Tests Value Specification
Make
2_ | Material Type Heavy duty suitable for heavy mechanical stresses, High Protection
3 _| Durability of Marking Marking shall be durable & legible (Clause No. 6.0)
Material Coating (Mass of Zinc Coating (min. 360g/m?)
a) | inside Surface Hot Dip Galvanised
b) | Outside Surface Hot Dip Galvanised
5 | Standard Length 3 Meters (Clause No.7.1)
1.4 to 1.8mm (Clause No. 7.1)
6 | Wall Thickness
[As per 16SWG]
7 _| Outer Diameter 20 mm (Tolerance: -0.3mm), (Clause No. 7.1)
@ | Thread Length isimm
9 | Bending Test ‘Shall show no crack & ball of appropriate gauge shall pass easily
(Clause No. 9.2)
Difference in outside diameter before and after applying force of
10 | Compression Test
Li 1250N shall not exceed by 10%. (Clause No. 9.3)
U) Identification Code, AKG —_1S:9537 Part-II
i INDIA
Marking along with CM/LNO. | > mmm —cha/l-8870602
Manufacturer: AKG Steel Industries
Client
SCON Projects Pvt Ltd
Project + IFB ProjectAKG Steel Industries
8.99, Sacer 81, Nida, Phase-2, UP-201005 (NDIA)
“ol: 0120482840, Emal: ehgstecondulsaigselin com
‘Website: wv ahgslaind com
TECHNICAL DATA SHEET
Manufacturer: AKG Steel Industries
Standard 15 9537 Part-II-1981
Size 25 mm Hot Dip Gi Rigid Steel Conduit Pipe
Protection _: High Protection ~ Hot Dip Galvanized
Raw material: Mild Steel
Date :27.09.2022
SI. | Characteristics/ Tests Value Specification
Make
2_| Material Type Heavy duty suitable for heavy mechanical stresses, High Protection
3_| Durability of Marking Marking shall be durable & legible (Clause No. 6.0)
4 | Material Coating (Mass of Zinc Coating (min. 3608/m)
a)_| Inside Surface Hot Dip Galvanised
|b) | Outside Surface Hot Dip Galvanised
5 | Standard Length 3 Meters (Clause No.7.1)
14 to 1.8mm (Clause No. 7.1)
6 | Wall Thickness
[As per 165WG]
7_ | Outer Diameter 25 mm (Tolerance: -0.4mm), (Clause No. 7.1)
8 | Thread Length 19£1mm
Shall show no crack & ball of appropriate gauge shall pass easily
(Clause No. 9.2)
Difference in outside diameter after applying force of 1250 N shall not
exceed by 10%. (Clause No. 9.3)
9 | Bending Test
10 | Compression Test
Identification Code, AKG —1S:9537 Part-ll
| sparking along with cmt No, | !NDIA
re 25mm CM/L-8870602
Manufacturer: AKG Steel Industries
Client + SCON Projects Pvt Ltd
Project IRB ProjectAKG Steel Industries
8.28, Seler-B1, Nida, Phese2 U.P-201905 (NDIA)
Wee “Tal: 01204523400, Emall: lgstesleondutsGakgsletn com
Wiobsite: wiwkgsteeind.com
lisa
“ent
Sy] ==.——_—————
TECHNICAL DATA SHEET
Manufacturer: AKG Steel Industries
Standard iS 9537 Part-lI-1981
Size 32 mm Hot Dip Gl Rigid Steel Conduit Pipe
Protection _: High Protection ~ Hot Dip Galvanised
Raw material: Mild Stee!
Date :27,09,2022
Si._| Characteristies/ Tests Value Specification
[| Make
2_| Material Type Heavy duty suitable for heavy mechanical stresses, High Protection
3__| Durability of Marking Marking shall be durable & legible (Clause No. 6.0)
4 | Material Coating (mass of Zinc Coating (min. 360g/m")
a) | Inside Surface Hot Dip Galvanised
by | Outside Surface Hot Dip Galvanised
5 | Standard Length 3 Meters (Clause No.7.1)
Fel aes 14 to 1.8mm (Clause No. 7.1)
[As per 165WG]
Outer Diameter 32 mm (Tolerance: -0.4mm), (Clause No. 7.1)
Thread Length 191mm
3. | Bending Test N/A
Difference in outside diameter before and after applying force of
10 | compression Test
cae 1250N shall not exceed by 10%. (Clause No. 9.3)
Identification Code, AKG 15:9537 Part-I
a. INDIA
Marking along with CM/LNo. | 35/07 of bac
Manufacturer : AKG Steel Industries
Client
Project
SCON Projects Pvt Ltd
IFB ProjectKRevanta
ne
AKG Steel Industries
8.99, Sacor-81, Nida, Phase, UP-201905 (NDA)
“ToL: 0120452840, Emal: abgtstondus aks com
‘Websts:wwnakglelnd om
Sy iSite Sci LY
TECHNICAL DATA SHEET
Manufacturer: AKG Steel Industries
Standard 1S 9537 Part-lI-1981
Size 40 mm Hot Dip GI Rigid Stee! Conduit Pipe
Protection _: High Protection ~ Hot Dip Galvanised
Raw material : Mild Steel
Date 27.09.2022
SI._| Characteristics/ Tests Value Specification
‘Make
2_| Material Type Heavy duty suitable for heavy mechanical stresses, High Protection
3__| Durability of Marking “Marking shall be durable & legible (Clause No. 6.0)
4 | Material Coating (Mass of Zinc Coating (min. 4008/m?)
a) _| Inside Surface Hot Dip Galvanised
b) | Outside Surface Hot Dip Galvanised |
S| Standard length 3 Meters (Clause No.7.1)
Té to 22mm (Clause No. 7.1)
6 | Wall Thickness
IAs per 14 swe]
7_| Outer Diameter 40mm (Tolerance: -0.4mm, (Clause No. 7.1)
@ | Thread Length 91mm
Bending Test NA
10 | compression Test Difference in outside diameter after applying force of 1250 N shall not
exceed by 10%. (Clause No. 9.3)
Identification Code, AKG 15:9537 Part!
n INDIA
Marking long with CM/LNo. | Some, —cuy/-8870602
Manufacturer: AKG Steel Industries
Client + SCON Projects Pvt Ltd
Project
FB ProjectAKG Steel Industries
® (B-99, Sector - 1, Noida, Phase-2, U.P-201906 (INDIA)
G Tol:0120452840, Emal skgslecondulsaigseend com
Wobste: avshgsiaindom
“Ream AS
LV ———__———————
TECHNICAL DATA SHEET
Manufacturer; AKG Steel Industries
Standard 1S 9537 Part-lI-1981
sire 50 mm Hot Dip GI Rigid Steel Conduit Pipe
Protection _; High Protection ~ Hot Dip Galvanized
Raw material: Mild Steel
Date :27,09,2022
a Value Specification
1 | Make
2_| Material Type Heavy duty sultable for heavy mechanical stresses, High Protection
Durability of Marking ‘Marking shall be durable & legible (Clause No. 6.0)
4 | Material Coating ‘Mass of Zine Coating (min. 4008/m*)
ay inside Surface Hot Dip Galvanised
) | Outside Surface Hot Dip Galvanised
3_| Standard Length 3 Meters (Clause No.1)
6 | Wall Thickness 16 to 2.2mm (Clause No. 7.3)
7_[ Outer Diameter 50mm (Tolerance: -0.Smm), (Clause No. 7.1)
B__| Thread Length etm
9 | Bending Test NIA
Difference In outside diameter after applying force of 1250 N shall not
10 | Compression Test
ee exceed by 10%. (Clause No. 9.3)
) Identification Code, AKG 15:9537 Partil
n INDIA GSP)
Marking along with CM/LNo. | Sinn, chayicdB70602
Manufacturer: AKG Steel Industries
Client + SCON Projects Pvt Ltd
Project 2 IFB Project