Professional Documents
Culture Documents
1
M8200
2
VERSION 02/2020
M8200
Typologies | Τυπολογίες
M8200 on-floor with 10+10mm or 8+8mm glass | M8200 για επιδαπέδια τοποθέτηση µε 10+10mm ή 8+8mm 25-28
M8207 on-floor with 10+10mm or 8+8mm glass | M8207 για επιδαπέδια τοποθέτηση µε 10+10mm ή 8+8mm 29-32
M8209 on-floor 8+8mm, 6+6mm or 5+5mm glass | M8209 για επιδαπέδια τοποθέτηση µε 8+8mm, 6+6mm ή 5+5mm 33-38
M8217 F-Type on-floor 8+8mm or 10+10mm or 8+8mm glass | M8217 F-type για επιδαπέδια τοποθέτηση 10+10mm ή 8+8mm υαλοπίνακα 39-42
M8219 F-Type on-floor 12+12mm glass | M8219 F-type για επιδαπέδια τοποθέτηση 12+12mm υαλοπίνακα 43-44
M8208 on-floor curved with 10+10mm or 8+8mm glass | M8208 για επιδαπέδια τοποθέτηση µε 10+10mm ή 8+8mm 47-50
M8210 in-floor with 10+10mm or 8+8mm glass | M8210 εγκιβωτισµένα σε δάπεδο µε 10+10mm ή 8+8mm 57-60
Side-mounted system on finished or semi-finished floor | Σύστηµα για τοποθέτηση πλευρικά σε έτοιµο ή ηµιέτοιµο δάπεδο 65-74
M8200 Glass railing - embedded solution | Σύστηµα για επιδαπέδια τοποθέτηση 75-80
3
M8200
4
M8200
Technical Information
Τεχνικές Πληροφορίες
5
M8200
The extensive variety (in terms of glass thickness, mounting, Το ευρύ σύνολο τυπολογιών (πάχος υάλωσης, τρόπος τοποθέτησης,
handrails, etc) offers elegant balcony and partitioning solutions κουπαστές) δίνει ελκυστικές λύσεις
in luxury residences, hotels and shopping malls, public buildings για κατασκευή µπαλκονιών και περιφράξεων, και βρίσκει απόλυτη
and surrounding areas. εφαρµογή στις κατασκευαστικές ανάγκες ξενοδοχείων και εµπορικών
κέντρων, πολυτελών κατοικιών και δηµόσιων χώρων.
Special continuous profiles for extreme sturdiness (Up to Ειδικά σχεδιασµένα και προτρυπηµένα προφίλ για κορυφαία
4KN/m), no glass alignment issues and installation easiness στιβαρότητα (µέχρι και 4ΚΝ/m) και υψηλά επίπεδα ασφάλειας, χωρίς
(pre-drilled θέµατα ευθυγράµµισης υαλοπινάκων, και µε χαρακτηριστική ευκολία
και ταχύτητα τοποθέτησης.
• Compatible with laminate tempered 4ple membrane • Συµβατό µε υαλοπίνακες triplex securit with 4πλή µεµβράνη
12+12, 10+10, 8+8, 6+6 and 5+5mm thickness for total 12+12, 10+10, 8+8, 6+6 και 5+5mm για συνολικό ύψος κατασκευής
construction up to 1.2m µέχρι και 1.2m
• Για τοποθέτηση επιδαπέδια, χωνευτά και πλευρικά µε ευρεία επιλογή
• On-floor, in-floor and side installation and with various σε κουπαστές
handrails available
• Χρήση του ίδιου σετ εξαρτηµάτων και επιλογή ταπών σε inox ή
• Same set of accessories and end caps made either of inox or βαµµένο αλουµίνιο
coated/anodised Aluminium
• Σύστηµα απορροής υδάτων και πρόβλεψη για ταινία LED
• Εfficient water outflow system and special space for LED tape
6
M8200
Symbol Explanation
Επεξήγηση Συµβόλων
7
M8200
SA = Γωνία σύνδεσης κουµπωτή αλουµινίου I = Προφίλ ενίσχυσης και πυρήνα = Εξωτερική περίµετρος
8
M8200
Profile Index
Ευρετήριο Προφίλ
9
Profile Index - Ευρετήριο Προφίλ
M8200
10
Profile Index - Ευρετήριο Προφίλ
M8200
M8218 M6027 G 40 x 40 x 4 L 40 x 4
U-24x10x2
11
M8200
12
M8200
Profiles 1:1
Προφίλ 1:1
13
Profile 1:1 - Προφίλ 1:1
M8200
90
113
M8200
Βάση κάγκελου - Base profile
Εξωτερική περίµετρος
629,5 mm
External perimeter
Κύρια περίµετρος
287,5 mm
Primary perimeter
Ροπή αδρανείας x-x
375,90 cm4
Moment of inertia x-x
Ροπή αδρανείας y-y
246,16 cm4
Moment of inertia y-y
Πάχος υαλοπίνακα
10+10mm, 8+8mm
Glazing thickness
14
Profile 1:1 - Προφίλ 1:1
M8200
70
64
95
75
M8207 M8209
Βάση κάγκελου- Base profile Βάση κάγκελου- Base profile
15
Profile 1:1 - Προφίλ 1:1
M8200
90
104,5
M8208
Βάση κάγκελου- Base profile
Εξωτερική περίµετρος
544,2 mm
External perimeter
Κύρια περίµετρος
237,7 mm
Primary perimeter
Ροπή αδρανείας x-x
225,07 cm4
Moment of inertia x-x
Ροπή αδρανείας y-y
138,00 cm4
Moment of inertia y-y
Πάχος υαλοπίνακα
10+10mm, 8+8mm
Glazing thickness
16
Profile 1:1 - Προφίλ 1:1
M8200
130
130
M8217
Βάση κάγκελου- Base profile
Εξωτερική περίµετρος
760,1 mm
External perimeter
Κύρια περίµετρος
Primary perimeter 353mm
Ροπή αδρανείας x-x
538,77 cm4
Moment of inertia x-x
Ροπή αδρανείας y-y
317,98 cm4
Moment of inertia y-y
Πάχος υαλοπίνακα
10+10mm, 8+8mm
Glazing thickness
17
Profile 1:1 - Προφίλ 1:1
M8200
140
140
M8219
Βάση κάγκελου- Base profile
Εξωτερική περίµετρος
820,1 mm
External perimeter
Κύρια περίµετρος
Primary perimeter 375 mm
Ροπή αδρανείας x-x
802,42 cm4
Moment of inertia x-x
Ροπή αδρανείας y-y
487,63 cm4
Moment of inertia y-y
Πάχος υαλοπίνακα
12+12
Glazing thickness
18
Profile 1:1 - Προφίλ 1:1
M8200
51,9
113
164
50
M8210 M8202
Βάση κάγκελου - Base profile Βάση κάγκελου- Base profile
Εξωτερική περίµετρος Εξωτερική περίµετρος
444,6 mm 733,2 mm
External perimeter External perimeter
Κύρια περίµετρος Κύρια περίµετρος
0 mm 0 mm
Primary perimeter Primary perimeter
Ροπή αδρανείας x-x Ροπή αδρανείας x-x
145,73 cm4 537,80 cm4
Moment of inertia x-x Moment of inertia x-x
Ροπή αδρανείας y-y Ροπή αδρανείας y-y
25,23 cm4 93,04 cm4
Moment of inertia y-y Moment of inertia y-y
Πάχος υαλοπίνακα Πάχος υαλοπίνακα
10+10mm, 8+8mm 10+10mm, 8+8mm
Glazing thickness Glazing thickness
19
Profile 1:1 - Προφίλ 1:1
M8200
41 51
12
11,9
M8204 M8218
Προφίλ γάντζος - Hook profile Cover profile - Καπάκι κάγκελο
798.41.248.13
60
M6027
LED
435.12.144.50
16,3
M8215
Additional profile - Πρόσθετο προφίλ
Εξωτερική περίµετρος
244 mm
External perimeter
Κύρια περίµετρος
Primary perimeter 65 mm
Ροπή αδρανείας x-x
0,64 cm4
Moment of inertia x-x
Ροπή αδρανείας y-y
5,06 cm4
Moment of inertia y-y
20
Profile 1:1 - Προφίλ 1:1
M8200
55 52,5
170
M8203 M8212
Προφίλ-καπάκι - Cover profile Προφίλ-καπάκι - Cover profile
21
Profile 1:1 - Προφίλ 1:1
M8200
64
40
M8214
Κουπαστή - Handrail
Εξωτερική περίµετρος
140 mm
External perimeter
Κύρια περίµετρος
152 mm
Primary perimeter
Ροπή αδρανείας x-x
168 cm4
Moment of inertia x-x
Ροπή αδρανείας y-y
180 cm4
Moment of inertia y-y
80
Ø50
48,3
45
M8201 M8205
Κουπαστή - Handrail Κουπαστή - Handrail
22
Profile 1:1 - Προφίλ 1:1
M8200
40
30
10
M8206 L 40 x 3
Κουπαστή για πάχος υαλοπίνακα 10+10mm Standard profile
Handrail for glazing thickness 10+10
Εξωτερική περίµετρος Βάρος
88,1 mm 324 gr/m
External perimeter Weight
Κύρια περίµετρος
50,0 mm
Primary perimeter
Ροπή αδρανείας x-x
0,07 cm4
Moment of inertia x-x
Ροπή αδρανείας y-y
1,35 cm4
Moment of inertia y-y
40
24
10
40
U-24x10x2 G 40 x 40 x 4
Κουπαστή για πάχος υαλοπίνακα 8+8mm
Standard profile
Handrail for glazing thickness 8+8
Εξωτερική περίµετρος Βάρος
83,0 mm 821 gr/m
External perimeter Weight
Κύρια περίµετρος
44,0 mm
Primary perimeter
Ροπή αδρανείας x-x
0,07 cm4
Moment of inertia x-x
Ροπή αδρανείας y-y
1,35 cm4
Moment of inertia y-y
Βάρος
216 gr/m
Weight
23
M8200
24
M8200
M8200
25
M8200
80
200.08201.03
M8201
830.60901.03
21,52mm
90
(10/1,52/10)
60
20,38mm
(10/0,38/10)
90
200.08005.01 200.08006.01
200.08200.03 200.08200.03
Silicone Silicone
830.00005.02
830.00005.02
105
113
Μ8200-ΤΡΥ Μ8200-ΤΡΥ
3
830.00001.03 830.00001.03
26
M8200
80
200.08203.03
M8201
830.60901.03
17,52mm 90
(8/1,52/8)
60
16,38mm
(8/0,38/8)
90
200.08005.01 200.08006.01
200.08202.03 200.08202.03
Silicone Silicone
830.00005.02
830.00005.02
830.00002.00
105
113
Μ8200-ΤΡΥ
3 Μ8200-ΤΡΥ
830.00002.00
27
M8200
• Continuous profile for glass constructions with height • Ενιαίο προφίλ για γυάλινες κατασκευές µε ύψος έως και
up to 1.2m 1.2m
• Glass panel 8+8 or 10+10mm laminate tempered with • Για υαλοπίνακα 8+8 ή 10+10mm triplex securit µε
quadruple membrane (special pad 1.2mm in the case of τετραπλή µεµβράνη (χρήση ειδικού πλακιδίου 1.2mm
single membrane) στην περίπτωση µονή µεµβράνη)
• Very robust construction - horizontal loading 4KN/m • Πολύ στιβαρή κατασκευή - οριζόντια φόρτιση 4KN/m
• Available in all surface treatment shades • Σε όλες τις διαθέσιµες αποχρώσεις επιφανειακής
επεξεργασίας
M8207
29
M8200
30
M8206
Silicone
21,52mm 830.60901.03
(10/1,52/10)
70
60
20,38mm
(10/0,38/10)
70
200.08005.01 200.08006.01
200.08200.03 200.08200.03
Silicone
830.00005.02 830.00005.02
2
82
95
Μ8207-ΤΡΥ Μ8207-ΤΡΥ
830.00001.03 830.00001.03
30
M8200
17,52mm
830.60901.03
(8/1,52/8)
70
60
16,38mm
(8/0,38/8)
70
200.08005.01 200.08006.01
200.08202.03 200.08202.03
Silicone
830.00005.02 830.00005.02
2
82
95
Μ8207-ΤΡΥ Μ8207-ΤΡΥ
830.00002.00 830.00002.00
31
M8200
• Continuous profile for glass constructions with • Ενιαίο προφίλ για γυάλινες κατασκευές µε ύψος έως
height up to 1.2m και 1.2m
• Glass panel 8+8 or 10+10mm laminate tempered • Για υαλοπίνακα 8+8 ή 10+10mm triplex securit µε
with quadruple membrane (special pad 1.2mm in the τετραπλή µεµβράνη (χρήση ειδικού πλακίδιο 1.2mm
case of single membrane) στην περίπτωση µονή µεµβράνη)
• Very robust construction - horizontal loading • Πολύ στιβαρή κατασκευή - οριζόντια φόρτιση
2.0KN/m 2.0KN/m
• Available in all surface treatment shades • Σε όλες τις διαθέσιµες αποχρώσεις επιφανειακής
επεξεργασίας
M8209
33
M8200
24
U-24x10x2
Silicone
17,52mm
(8/1,52/8) 830.60901.03
60
90
16,38mm
(8/0,38/8)
64 64
200.08005.01 200.08006.01
200.08200.03 200.08200.03
Silicone Silicone
830.00005.02 830.00005.02
1,4 1,4
71
71
75
75
Μ8209-ΤΡΥ Μ8209-ΤΡΥ
290.00005.00 290.00005.00
830.50313.00 830.50313.00
34
M8200
13,52mm
(6/1,52/6) 830.60901.03
60
90
12,38mm
(6/0,38/6)
64 64
200.08005.01 200.08006.01
200.08202.03 200.08202.03
Silicone Silicone
830.00005.02 830.00005.02
1,4
71
75
830.60901.03 (70mm)
Μ8209-ΤΡΥ Μ8209-ΤΡΥ
290.00005.00 290.00005.00
830.50313.00 830.50313.00
35
M8200
830.60902.03
60
60
+
11,52mm
(5/1,52/5) 830.60901.03
60
830.60902.03 90
60
10,38mm
60
(5/0,38/5)
64
200.08007.01 200.08008.01
200.08202.03 200.08202.03
Silicone
830.00005.02 830.00005.02
1,4
71
75
Μ8209-ΤΡΥ Μ8209-ΤΡΥ
290.00005.00 290.00005.00
830.50313.00 830.50313.00
36
M8200
• Continuous profile for glass constructions with • Ενιαίο προφίλ για γυάλινες κατασκευές µε ύψος
height up to 0.70m έως και 0.70m
• Glass panel 5+5, 6+6 or 8+8 laminate tempered • Για υαλοπίνακα 5+5, 6+6 και 8+8mm triplex
with quadruple membrane (special pad 1.2mm in securit µε τετραπλή µεµβράνη (χρήση ειδικού
the case of single membrane) πλακίδιο 1.2mm στην περίπτωση Μονή µεµβράνη)
5+5mm panel requires plastic pad 2mm Η περίπτωση 5+5mm απαιτεί το πλαστικό πλακίδιο
2mm
• Available in all surface treatment shades • Σε όλες τις διαθέσιµες αποχρώσεις επιφανειακής
επεξεργασίας
37
M8200
38
M8200
M8217
F-Type
39
M8200
80
0
Ø5
U-24X10X2
M8201 M8205
200.08203.03 200.08203.03
17,52mm 17,52mm
(8/1,52/8) (8/1,52/8)
51
200.06860.01
200.08005.01
200.08202.03
200.08202.03
Silicone Silicone
830.00005.03
830.00005.03
830.00002.00
830.00002.00
Μ8217 Μ8217
40
M8200
80
0
Ø5
M8206
M8201 M8205
200.08201.03 200.08201.03
21,52 21,52
(10/1,52/10) (10/1,52/10)
51
200.06860.01
200.08005.01
200.08200.03
200.08200.03
Silicone Silicone
830.00005.03
830.00005.03
830.00001.03
830.00001.03
Μ8217 Μ8217
41
M8200
• Glass panel 8+8 or 10+10mm laminate tempered •Για υαλοπίνακα 12+12mm triplex securit µε
with quadruple membrane τετραπλή µεµβράνη
• Continuous profile for glass constructions with •Μονοκόµµατο προφίλ για πολύ υψηλές γυάλινες
height up to 1.2m κατασκευές
• Available in all surface treatment shades •Διατίθεται σε όλες τις αποχρώσεις ανοδίωσης και
Η/Β βαφής
42
M8200
M8219
F-Type
43
M8200
25,52mm
(12/1,52/12)
25,50
200.06860.01 M8218
200.08006.01
200.08202.03
Silicone
830.00005.02 830-00-005-03
Μ8219
830.00003.00
44
M8200
·•Glass panel 12+12mm laminate tempered with •Για υαλοπίνακα 12+12mm triplex securit µε
quadruple membrane τετραπλή µεµβράνη
·•Continuous profile for very high glass •Μονοκόµµατο προφίλ για πολύ υψηλές γυάλινες
constructions κατασκευές
·•Available in all surface treatment shades •Διατίθεται σε όλες τις αποχρώσεις ανοδίωσης και
Η/Β βαφής
45
M8200
46
M8200
M8208
47
M8200
50
200.08201.03
M8205
1169gr/m
21,52mm
(10/1,52/10) 830.60901.03
70
60
20.38mm
(10/0,38/10)
90
200.08005.01 200.08006.01
200.08200.03 200.08200.03
Silicone
830.00005.02 830.00005.02
89,5
104,5
3,5
Μ8208-ΤΡΥ Μ8208-ΤΡΥ
830.00001.03 830.00001.00
48
M8200
200.08203.03
M8205
1169gr/m
17,52mm
830.60901.03
(8/1,52/8)
70
60
16.38mm
(8/0,38/8)
90
200.08005.01 200.08006.01
200.08202.03 200.08202.03
Silicone
830.00005.02 830.00005.02
89,5
104,5
3,5
Μ8208-ΤΡΥ Μ8208-ΤΡΥ
830.00002.00 830.00002.00
49
M8200
• Specially designed profile for curved construction • Ειδικά σχεδιασµένο προφίλ για καµπύλες
with a radius of up to 2.0m κατασκευές µε ακτίνα έως και 2.0m
• Glass panel 8+8 or 10+10mm laminate tempered • Για υαλοπίνακα 8+8 ή 10+10mm triplex securit µε
with quadruple membrane (special pad 1.2mm in τετραπλή µεµβράνη (χρήση ειδικού πλακίδιο 1.2mm
the case of single membrane) στην περίπτωση Μονή µεµβράνη)
• Continuous profile for glass constructions with a • Ενιαίο προφίλ για γυάλινες κατασκευές µε ύψος
height up to 1.2m έως και 1.2m
• Available in all surface treatment shades • Σε όλες τις διαθέσιµες αποχρώσεις επιφανειακής
επεξεργασίας
M8202 side-mounted
with 10+10mm or 8+8mm glass
on finished or semi-finished floor
M8202
51
M8200
Σύστηµα για τοποθέτηση πλευρικά σε ΈΤΟΙΜΟ δάπεδο | Sidemount system for FINISHED floor
Με υαλοπίνακα 10+10 (21,52mm) Με υαλοπίνακα 10+10 (20,38mm)
With glass 10+10 (21,52mm) With glass 10+10 (20,38mm)
4ple membrαne - 4πλή µεµβράνη Single membrαne - Μονή µεµβράνη
30
Μ8206
10
830.60901.03
21,52mm
(10/1,52/10) 90
60
20.38mm
(10/0,38/10)
200.08005.01 200.08006.01
105
M8204 M8204
170
830-52-122-00 830-52-122-00
Μ8202-ΤΡΥ Μ8202-ΤΡΥ
Μ8203 Μ8203
769-08-080-00 769-08-080-00
55
52
M8200
Σύστηµα για τοποθέτηση πλευρικά σε ΈΤΟΙΜΟ δάπεδο | Sidemount system for FINISHED floor
Με υαλοπίνακα 8+8 (17,52mm) Με υαλοπίνακα 8+8 (16,38mm)
With glass 8+8 (17,52mm) With glass 8+8 (16,38mm)
4ple membrαne - 4πλή µεµβράνη Single membrαne - Μονή µεµβράνη
80
M8201
830.60901.03
17,52mm
(8/1,52/8) 90
60
16.38mm
(8/0,38/8)
200.08005.01 200.08006.01
105
105
M8204 M8204
170
170
830-52-122-00 830-52-122-00
Μ8202-ΤΡΥ Μ8202-ΤΡΥ
Μ8203 Μ8203
769-08-080-00 769-08-080-00
55 55
53
M8200
Σύστηµα για τοποθέτηση πλευρικά σε ΗΜΙΕΤΟΙΜΟ δάπεδο | Sidemount system for SEMI-FINISHED floor
Με υαλοπίνακα 10+10 (21,52mm) Με υαλοπίνακα 10+10 (20,38mm)
With glass 10+10 (21,52mm) With glass 10+10 (20,38mm)
50
2
Μ8205
830.60901.03
90
21,52mm
(10/1,52/10) 60
20,38mm
(10/0,38/10)
200.08005.01 200.08006.01
105
105
830-58-202-00 830-58-202-00
170
170
769-08-080-00 769-08-080-00
Μ8202-ΤΡΥ Μ8202-ΤΡΥ
Μ8203 Μ8203
769-08-080-00 769-08-080-00
55 55
54
M8200
Σύστηµα για τοποθέτηση πλευρικά σε ΗΜΙΕΤΟΙΜΟ δάπεδο | Sidemount system for SEMI-FINISHED floor
Με υαλοπίνακα 8+8 (17,52mm) Με υαλοπίνακα 8+8 (16,38mm)
With glass 8+8 (17,52mm) With glass 8+8 (16,38mm)
80
M8201
1443gr/m
830.60901.03
17,52mm
(8/1,52/8) 90
60
16,38mm
(8/0,38/8)
200.08005.01 200.08006.01
105
105
830-58-202-00 830-58-202-00
170
170
769-08-080-00 769-08-080-00
Μ8202-ΤΡΥ Μ8202-ΤΡΥ
Μ8203 Μ8203
769-08-080-00 769-08-080-00
55 55
55
M8200
• Continuous profile for glass constructions with • Ενιαίο προφίλ για γυάλινες κατασκευές µε ύψος
height up to 1.2m έως και 1.2m
• Glass panel 8+8 or 10+10mm laminate tempered • Για υαλοπίνακα 8+8 ή 10+10mm triplex securit µε
with quadruple membrane (special pad 1.2mm in the τετραπλή µεµβράνη (χρήση ειδικού πλακίδιο 1.2mm
case of single membrane) στην περίπτωση Μονή µεµβράνη)
• Very robust construction and horizontal loading up • Πολύ στιβαρή κατασκευή - οριζόντια φόρτιση
to 2.0KN/m 2.0KN/m
• Available in all surface treatment shades • Σε όλες τις διαθέσιµες αποχρώσεις επιφανειακής
επεξεργασίας
56
M8200
M8210
57
M8200
M8201
830.60901.03
90
21.52mm
(10/1,52/10) 60
21.52mm 20.38mm
(10/1,52/10) (10/0,38/10)
830.00005.02 830.00005.02
830.00001.03 830.00001.03
58
M8200
80
M8201
830.60901.03
90
17.52mm
(8/1,52/8) 60
17.52mm
(8/1,52/8)
16.38mm
(8/0,38/8)
830.00005.02 830.00005.02
830.00002.00 830.00002.00
59
M8200
• Glass panel 8+8 or 10+10mm laminate tempered •Για υαλοπίνακα 8+8 ή 10+10mm triplex securit µε
with quadruple membrane (special pad 1.2mm in the τετραπλή µεµβράνη (χρήση ειδικού πλακιδίου 1.2mm
case of single membrane) στην περίπτωση µονής µεµβράνης)
• Continuous profile for glass constructions with a •Ενιαίο προφίλ για γυάλινες κατασκευές µε ύψος
height up to 1.1m έως και 1.1m
60
M8200
Instructions
Οδηγίες τοποθέτησης
On - floor system
Σύστηµα για επιδαπέδια τοποθέτηση
61
M8200
759-12-003-00 (Ø12mm)
2
ή|or
830-52-122-00
(M8x80)
200-08-200-03 200-08-202-03
830-52-122-03
760-01-515-00 (No5) (M8x120) 10+10 (21,52mm) 8+8 (17,52mm) Μ8200
We stabilize the base profile tightening the mounting screws with the suitable tool
(Allen No5). The glass gasket is applied on the profile from the outside side.
Σταθεροποιούµε τη βάση βιδώνοντας τους ειδικούς κοχλίες στερέωσης µε το
κατάλληλο εργαλείο (Allen No5). Το ελαστικό τζαµιού εφαρµόζεται επάνω στο
προφίλ προσέχοντας να είναι από την έξω πλευρά του µπαλκονιού.
3a
waterproof, flexible LED tape
(12/24V, 10x4mm)
εύκαµπτη αδιάβροχη ταινία LED
(12/24V, 10x4mm)
830-00-002-00
8+8 (17,52mm)
For glass 8+8 (17.52mm), first we place the the U-shape fitting every 300mm
and then we place the glass. This fitting allows the integration of a flexible
LED stripe for concealed lighting.
Για υαλοπίνακες 8+8 (17.52mm) τοποθετούµε πρώτα τους τάκους (µορφής "Π"
από πολυαµίδιο) κάθε 300mm και στη συνέχεια τον ίδιο τον υαλοπίνακα. Δίνεται
η δυνατότητα τοποθέτησης εύκαµπτης και αδιάβροχης ταινίας LED.
62
M8200
830-00-001-03
10+10 (21,52mm)
Using the special plastic wedges every 300mm, we stabilize the glass and then
we may apply silicone on each plastic wedge for extra security. The wedge should
be installed right above the glazing holder.
200-08-005-01
200-08-006-01
We cover the empty space left from inside with a gasket of wedge type.
63
M8200
M8205
For the handrail placement, first, we place the special gasket onto glass and then the
handrail itself, which is stabilized on the gasket. You may also apply some silicone.
Τοποθετούµε πρώτα το ειδικό ελαστικό κουπαστής επάνω στον υαλοπίνακα, και στη
συνέχεια την ίδια την κουπαστή, η οποία κουµπώνει και ασφαλίζει στο ελαστικό. Αν είναι
απαραίτητο σταθεροποιούµε και µε σιλικόνη.Μπορούµε να επιλέξουµε µεταξύ τριών
διαφορετικών κουπαστών, στρόγγυλη, οβάλ και ίσια.
Finally, we screw the relevant side caps on the handrail and the base
profile.
64
M8200
Instructions
Οδηγίες τοποθέτησης
Sidemount system
for finished or semi-finished floor
65
M8200
Σύστηµα για τοποθέτηση πλευρικά σε ΕΤΟΙΜΟ δάπεδο (χωρίς επίστρωση)
Sidemount system for FINISHED floor
1
830-52-122-00
(M8x80)
830-52-122-03
(M8x120) Μ8204
2 ή|or
200-08-200-03 200-08-202-03
M8202 10+10 (21,52mm) 8+8 (17,52mm)
769-08-080-00 (M8x80)
66
M8200
Σύστηµα για τοποθέτηση πλευρικά σε ΕΤΟΙΜΟ δάπεδο (χωρίς επίστρωση)
Sidemount system for FINISHED floor
4
M8203
5a
εύκαµπτη αδιάβροχη ταινία LED
(12/24V, 10x4mm)
waterproof, flexible LED tape
(12/24V, 10x4mm)
830-00-002-00
8+8 (17,52mm)
For 17,52mm glass placement, first we place plastic wedges and after we
place glass.We can choose use of waterproof, flexible LED tape.
5b
830-00-001-03
10+10 (21,52mm)
For 21,52mm glass placement, first we place the glass into the base
using the appropriate tool (suctions) and after having put the small
gaskets (Π shape) on the glass (every 300 mm).
67
M8200
Σύστηµα για τοποθέτηση πλευρικά σε ΕΤΟΙΜΟ δάπεδο (χωρίς επίστρωση)
Sidemount system for FINISHED floor
6
770-00-008-00
(silicone tool)
830-00-005-02 770-00-010-05
(silicone No3)
Using the special plastic wedges every 300mm, we stabilize the glass and then
we may apply silicone on each plastic wedge for extra security. The wedge should
be installed right above the glazing holder.
200-08-006-01
We cover the empty space left from inside with a gasket of wedge
type.
Καλύπτουµε το κενό που αποµένει από την εσωτερική πλευρά µε
ένα ελαστικό τύπου σφήνας.
8 M8201 ή|or
M8205
*
M8206
200-08-201-03 200-08-203-03
10+10 (21,52mm) 8+8 (17,52mm)
For the handrail placement, first, we place the special gasket onto glass and
then the handrail itself, which is stabilized on the gasket. You may also apply
some silicone.
Τοποθετούµε πρώτα το ειδικό ελαστικό επάνω στον υαλοπίνακα, και στη
συνέχεια την ίδια την κουπαστή, η οποία κουµπώνει και ασφαλίζει στο
ελαστικό. Αν είναι απαραίτητο σταθεροποιούµε και µε σιλικόνη.
68
M8200
Σύστηµα για τοποθέτηση πλευρικά σε ΕΤΟΙΜΟ δάπεδο (χωρίς επίστρωση)
Sidemount system for FINISHED floor
*
Finally, we screw the relevant side caps on the handrail and the base
profile.
69
M8200
Sidemount system for SEMI-FINISHED floor
Σύστηµα για τοποθέτηση πλευρικά σε ΗΜΙEΤΟΙΜΟ δάπεδο (χωρίς επίστρωση)
1
759-12-003-00 (Ø12mm)
2 ή|or
200-08-200-03 200-08-202-03
M8202 10+10 (21,52mm) 8+8 (17,52mm) 769-08-080-00 (M8x80)
We place and stabilize the base profile M8202 with the special bolts
(screws). The gasket is applied on the profile from the outside side.
70
M8200
Sidemount system for SEMI-FINISHED floor
Σύστηµα για τοποθέτηση πλευρικά σε ΗΜΙEΤΟΙΜΟ δάπεδο (χωρίς επίστρωση)
4
M8203, M8212
5a
Waterproof, flexible LED tape
(12/24V, 10x4mm)
Εύκαµπτη αδιάβροχη ταινία LED
(12/24V, 10x4mm)
830-00-002-00
8+8 (17,52mm)
For 17,52mm glass placement, first we place plastic wedges and after we
place glass.We can choose use of waterproof, flexible LED tape.
5b
830-00-001-03
10+10 (21,52mm)
For 21,52mm glass placement, first we place the glass into the base
using the appropriate tool (suctions) and after having put the small
gaskets (Π shape) on the glass (every 300 mm).
71
M8200
Sidemount system for SEMI-FINISHED floor
Σύστηµα για τοποθέτηση πλευρικά σε ΗΜΙEΤΟΙΜΟ δάπεδο (χωρίς επίστρωση)
6
Using the special plastic wedges every 300mm, we stabilize the glass and then
we may apply silicone on each plastic wedge for extra security. The wedge should
be installed right above the glazing holder.
200-08-006-01
We cover the empty space left from inside with a gasket of wedge
type.
Καλύπτουµε το κενό που αποµένει από την εσωτερική πλευρά µε
ένα ελαστικό τύπου σφήνας.
8 M8201 ή|or
M8205
*
M8206
200-08-201-03 200-08-203-03
10+10 (21,52mm) 8+8 (17,52mm)
For the handrail placement, first, we place the special gasket onto glass and
then the handrail itself, which is stabilized on the gasket. You may also apply
some silicone.
Τοποθετούµε πρώτα το ειδικό ελαστικό επάνω στον υαλοπίνακα, και στη
συνέχεια την ίδια την κουπαστή, η οποία κουµπώνει και ασφαλίζει στο
ελαστικό. Αν είναι απαραίτητο σταθεροποιούµε και µε σιλικόνη.
72
M8200
Sidemount system for SEMI-FINISHED floor
Σύστηµα για τοποθέτηση πλευρικά σε ΗΜΙEΤΟΙΜΟ δάπεδο (χωρίς επίστρωση)
*
Finally, we screw the relevant side caps on the handrail and the base
profile.
Τέλος, βιδώνουµε πλευρικά τις αντίστοιχες τάπες της κουπαστής και
της βάσης.
73
M8200
Τοποθέτηση ελαστικου αρµού βάσης 200-08-204-03
200-08-204-03 Joint gasket installation
*
200-08-204-03
Joint gasket
Λάστιχο αρµού
74
M8200
Instructions
Οδηγίες τοποθέτησης
M8200 Glass railing - embedded solution
Σύστηµα
για επιδαπέδια τοποθέτηση
75
M8200
Generally, the on-floor base profiles, like M8207, are often used to create
in-floor applications, however, M8210 is the appropriate profile for
embedded placement.
You need to align and fix the profiles and then pour the liquid concrete
material. After drying, a concrete parapet is created having a well-placed
ALUMinium base profile, ready to p[lace the glass.
The profile comes 4-sided, having the top side edges much thinner for easy
unzipping. This is for having the glass chamber clean from cement and dirt.
No need to fix the base profile on the concrete with screws as we do with an on-floor base profile.
You may do so, but then you have to adopt a different way of installation, which needs to be more
accurate, i.e. it would be difficult to have it correctly aligned in that case.
Depending on the project characteristics, phase and engineer expertise, the installation technic can
vary. Generally, you put the bars in a channel made by a mold, made of wood, steel, etc, and have
them aligned. Then, you may use either some special liquid mixtures of cement, sand with resins or
just concrete.
Below we present the two technics, the first using simple concrete and the second based on the resin
mixture, i.e. “fiber-reinforced, polymer-modified, cement mortar“, which is more expensive.
76
M8200
You may have the profile fixed with simple concrete C25 e.g., as shown in the picture besides. You
need to have the concrete floor ready and some steel beams to expand over it.
You make a metal mold (better metal than wood, to be sturdier and reusable) which is stretched with
metal spacers (top/bottom). You may use these spacers to adjust the profile too. Profile should be
further fixed with other metal and wood wedges.
spacers floor
Mold
metal or wood
floor
You pour the concrete and use a vibrating device to have the material applied all over.
With this method above you may just create a channel and then have the profile embedded.
77
M8200
2nd method
Then, you should put the bar inside the socket and have it
aligned. Be careful with which is the inner and the outer side.
There are various ways to do so, mainly using wood structures,
wedges and pads.
The one presented here uses these wood “Π” structure which
is easily fixed (screwed) on the top side of the profile. And it
can be repeatedly used.
On the other hand, you may just use wood wedges on both sides
to align the profile and additional wood pads under the profile to
keep it at the right height.
78
M8200
-
M8200 Glass railing - embedded solution
Σύστηµα για επιδαπέδια τοποθέτηση
You need to prepare and pour a liquid mixture of cement, sand
and resin inside the gap taking care that the liquid will go under
the bar and fully embrace the bar.
First you place the gasket on top of the profile and at the outer
side.
Then you insert the glass panel having put the “U” shape
accessories at the bottom of the glass.
You apply the wedges every 300mm and at the same point
where you have put the “U” shape accessories (see above).
79
M8200
To improve installation ease while aligning the glass panels, you may use
special adjustable fittings/tools. Such are provided by glass suppliers and are
easily found in the market. Alternatively, you may use 20cm pieces of
handrail with gasket.
For a more sufficient sealing you may cut this gasket at small pieces and apply them
(click) between the glass panels and at the gap that the panels leave in-between.
Though non-tempered glass is not proposed, in case of using such type of glass, you
should put in a vertical position a 1.2mm plastic pad between the glass and the
wedge. This is because these glasses use a single-layer membrane and there is a
difference of 1.2mm
* Check additional info in our technical catalogue, and especially in the on-floor
installation instructions section.
80
M8200
Accessories - Gaskets
Εξαρτήµατα - Ελαστικά
81
Accessories / Gaskets Εξαρτήµατα / Ελαστικά
M8200
(M10x80) (M8x80)
Base profile screw Anchorage accessory Base profile screw
60 x 60 x 2.0 mm
Plastic wedge M8209 pad for 6+6mm M8209 setting block
82
Accessories / Gaskets Εξαρτήµατα / Ελαστικά
M8200
830-18-208-00 INOX
830-18-218-00 ALUM 830-18-209-00 830-60-901-03
830-18-219-00 ALUMINIUM Piece
Set Set
Τεµάχιο
Σετ Σετ
83
Accessories / Gaskets Εξαρτήµατα / Ελαστικά
M8200
Λάστιχο σφήνας τζαµιού Λάστιχο κουπαστής Μ8201, M8205 Λάστιχο κουπαστής Μ8201, M8205
(No5)
LED cover for aluminium profile Pan tapping screw
ISO 7049/DIN 7981 galv. 4,8X13 PH Allen screwdriver
5m white
Κάλυµα LED για προφίλ αλουµινίου Κεφαλωτή λαµ/βιδα
Kατσαβίδι άλεν
5m λευκό ISO 7049/DIN 798 γαλβ. 4,8X13 PH
40
40
84
M8200
General Information
Γενικές Πληροφορίες
85
M8200
Με την µέθοδο της διέλασης το αλουµίνιο έχει την δυνατότητα να ALUMinium has the capability of being extruded into complex shapes to
δηµιουργεί πολύπλοκες διατοµές µε ανοχές ακριβείας. Το αλουµίνιο exact tolerances. ALUMinium can be formed into literally thousands of
µπορεί να µορφοποιηθεί σε πραγµατικά απεριόριστο αριθµό µοναδικών unique profiles, each one able to meet a number of specific structural
προφίλ, καθένα από τα οποία ικανοποιεί ειδικές δοµικές και αισθητικές and aesthetic requirements. It is this capability to provide simple
απαιτήσεις. Αυτή η ικανότητα του υλικού να προσφέρει απέριττες και elegant solutions to extremely complex design problems that has led
καλαίσθητες λύσεις σε ιδιαίτερα πολύπλοκα σχεδιαστικά προβλήµατα το to ALUMinium's enduring appeal. ALUMinium is chosen for outdoor use
οδήγησε στην ηγετική θέση που κατέχει σήµερα. Το αλουµίνιο επιλέγεται because it is a stable, corrosion-resistant and light weight metal. One
για το εξωτερικό των κτιρίων γιατί είναι σταθερό, ανθεκτικό στη of ALUMinium's primary appeals to a specifier is its exceptional
διάβρωση και ελαφρύ µέταλλο. Μια από τις πιο δελεαστικές ιδιότητες strength to weight ratio. At 2.7g/cm2, ALUMinium is 66% lighter than
του αλουµινίου για τον µηχανικό, είναι ο καταπληκτικός λόγος steel. It is also far less susceptible to brittle fractures. Indeed, when
αντίστασης/βάρους. Στα 2,7 gr/cm2, το αλουµίνιο είναι 66% πιο ελαφρύ ALUMinium and steel structures are compared, ALUMinium's greater
από τον χάλυβα. Επίσης είναι ανθεκτικό σε ψαθυρή θραύση. Όταν γίνεται modulus of elasticity means that weight ratios of 1:2 are easily
σύγκριση µεταξύ κατασκευών αλουµινίου και κατασκευών χάλυβα, ο attained. It can also be processed at high cutting speeds and welded
µεγαλύτερος συντελεστής ελαστικότητας του αλουµινίου σηµαίνει ότι ο connections are not necessary. These advantages help to reduce
λόγος βάρους 1:2 επιτυγχάνεται εύκολα. Ακόµη, µπορεί να κατεργαστεί fabrication time. ALUMil constructions are realized with ALUMinium
µε υψηλές ταχύτητες κοπής και οι συγκολλητές συνδέσεις δεν είναι profiles extruded in the alloy EN AW 6060 according to EN 755-1. The
απαραίτητες. Αυτά τα πλεονεκτήµατα συµβάλλουν στην µείωση των mechanical characteristics conform to the standard EN 755-2, with a
χρόνων κατασκευής. Τα προφίλ που συνθέτουν τα συστήµατα της modulus of elasticity of 70GPa.
ALUMil είναι από κράµα ΕΝ AW 6060 σύµφωνα µε το εναρµονισµένο The tolerances are based on EN 755-3.
πρότυπο (ΕΝ) 755-1. Τα µηχανικά χαρακτηριστικά συµµορφώνονται µε
το πρότυπο ΕΝ 755-2, µε συντελεστή ελαστικότητας 70kN/mm2. Οι
ανοχές βασίζονται στο ΕΝ 755-3. 2. Contact with other materials
2.1 Μέταλλα When two metals of differing electro-negativity values come into
contact in humid conditions, an electrical couple is formed giving rise to
Όταν δύο µέταλλα µε διαφορετική ηλεκτροαρνητικότητα (electro- oxidizing effects at the expense of electro-negative metal of the
negativity) έρχονται σε επαφή σε υγρό περιβάλλον, το πιο couple. In order to avoid severe corrosion effects, an insulating barrier
ηλεκτροαρνητικό από τα δύο, µέταλλο, υφίσταται µια ηλεκτρική και should be placed between the two metals. Contact with stainless steel
οξειδωτική τάση. Το αλουµίνιο είναι περισσοτερό ηλεκτροαρνητικό has not been found to be harmful to ALUMinium to date. Contact with
συγκρινόµενο µε τα άλλα µέταλλα. Ο εκτεθειµένος (απροστάτευτος) copper and its alloys is extremely harmful to ALUMinium It is
χάλυβας, οξειδώνεται και επιτίθεται στο αλουµίνιο. Για να αποφευχθεί η absolutely necessary to insulate these two metals. Lead should be
διάβρωση του αλουµινίου, θα πρέπει να τοποθετείται µεταξύ των δύο insulated as well.
µετάλλων ένα µονωτικό διαχωριστικό. Αντιθέτως, η επαφή µε τον
ανοξείδωτο χάλυβα, από όσα γνωρίζουµε µέχρι σήµερα, δεν φαίνεται να 2.2 Timber
βλάπτει το αλουµίνιο. Η επαφή µε τον χαλκό και τα κράµατά του είναι
εξαιρετικά επιζήµια για το αλουµίνιο και η προστασία µε επιφανειακή Most timbers have no harmful effects on ALUMinium Some such as
µόνωση αυτών των δύο υλικών απαιτείται. Τέλος και ο µόλυβδος είναι walnut however, produce acids which attack and damage ALUMinium
πιο ηλεκτροθετικός από το αλουµίνιο και θα πρέπει να µονώνεται επίσης. These effects occur especially in humid conditions or when the timber is
not sufficiently dry. Insulation is recommended by using a bituminous
2.2 Ξύλο paint. When you treat timber against humidity and insects you should
check that the chemical substances used in the treatment are not
Τα περισσότερα είδη ξυλείας δεν έχουν επιβλαβείς επιπτώσεις στο harmful to ALUMinium Products containing copper salts, mercury
αλουµίνιο. Ορισµένα είδη ξυλείας όµως, όπως η δρύς και η καρυδιά, salts, and fluoride compounds are very harmful to ALUMinium and
παράγουν οξέα τα οποία προσβάλλουν και φθείρουν το αλουµίνιο. Αυτά should be avoided.
τα φαινόµενα παρατηρούνται κυρίως σε συνθήκες αυξηµένης υγρασίας
στο περιβάλλον ή όταν το ξύλο δεν είναι αρκετά στεγνό. Συνιστάται η 2.3 Lime/Cement
µόνωση µε την χρήση ασφαλτούχου χρώµατος. Επίσης όταν το ξύλο
υποβάλλεται σε επεξεργασίες για την προφύλαξή του από την υγρασία In humid conditions, limestone or cement reacts with ALUMinium (even
και τα έντοµα, θα πρέπει να ελέγχεται ότι οι χηµικές ουσίες που when anodized) revealing superficial white spots on the surface of the
χρησιµοποιούνται για την κατεργασία δεν είναι επιβλαβείς για το metal after cleaning. It is advisable to protect the ALUMinium during
αλουµίνιο. Προϊόντα που στην σύνθεσή τους περιέχεται στεατικός installation with ALUMIL protective foil.
χαλκός, άλατα υδραργύρου και φθοριούχες ενώσεις, είναι πολύ
επιβλαβή για το αλουµίνιο και θα πρέπει να αποφεύγονται.
2.3 Ασβέστης/Τσιµέντο
86
M8200
Για την αποφυγή επιφανειακών φθορών πρέπει να παίρνονται οι 4.1 Store the profiles in a dry area
παρακάτω προφυλάξεις: 4.2 Avoid any contact with steel by protecting the profiles with
wrapping paper or plastic foil. In humid areas rust and steel burr
4.1 Τα προφίλ να αποθηκεύονται σε χώρο που δεν υπάρχει υγρασία can damage the surface finish.
4.2 Να αποφεύγεται οποιαδήποτε επαφή µε χάλυβα, προστατεύοντας τα 4.3 Store the profiles horizontally in such a way as to eliminate the
προφίλ µε χαρτί συσκευασίας ή πλαστική µεµβράνη. Σε υγρές possibility of damaging or scratching the profiles while removing
περιοχές σκουριά και ρινίσµατα χάλυβα µπορούν να προκαλέσουν them
φθορές στην επιφανειακή επεξεργασία. 4.4 Store the profiles in batches.
4.3 Τα προφίλ πρέπει να αποθηκεύονται σε οριζόντια θέση µε τρόπο που
να αποκλείεται η πιθανότητα φθοράς ή γρατσουνίσµατος κατά την 5. ALUMinium maintenance
µετακίνησή τους.
4.4 Τα προφίλ να αποθηκεύονται συσκευασµένα. Both anodised and painted ALUMinium should be cleaned on a regular
basis. For urban not littoral areas that are not subjected to aggressive
5. Συντήρηση του αλουµινίου elements like air pollution or salty air, it is sufficient to clean the
ALUMinium whenever you clean the glass. Warm water should be used
Τόσο το ανοδιωµένο όσο και το ηλεκτροστατικά βαµµένο αλουµίνιο, with a dilute of a non-aggressive, non-acetous detergent without
πρέπει να καθαρίζονται σε τακτά διαστήµατα. Σε ηµιαστικές µη ammonia for cleaning the ALUMinium Then you should thoroughly rinse
παραθαλάσσιες περιοχές που δεν επηρεάζονται από επιθετικά the ALUMinium with clear water and dry using an absorbing cloth. In
περιβαλλοντικά φαινόµενα όπως ατµοσφαιρική ρύπανση ή αλατώδες urban areas or areas near to the sea, the ALUMinium should be cleaned
περιβάλλον, ο καθαρισµός µπορεί να γίνεται µαζί µε τον καθαρισµό των more often and more thoroughly. Areas that are not exposed to rainfall
τζαµιών. Για τον καθαρισµό του αλουµινίου συνιστάται η χρήση χλιαρού should be cleaned more frequently than other surfaces. If water and
νερού και ενός «µαλακού» απορρυπαντικού που να µην είναι όξινο και να mild detergents are not enough to clean the ALUMinium fenestrations
µην περιέχει αµµωνία. Μετά, πρέπει να ξεβγάζεται επιµελώς µε νερό και there are detergents that have been specially developed for
να στεγνώνεται µε ένα µαλακό απορροφητικό πανί. Σε αστικές ή ALUMinium surfaces. These detergents contain light abrasive
παραθαλάσσιες περιοχές, ο καθαρισµός του αλουµινίου πρέπει να elements and can be used with a synthetic cleaning cloth. In all cases it
γίνεται πιο συχνά και µε πολύ µεγάλη επιµέλεια. Οι επιφάνειες is important to completely rinse surfaces with clear water and dry them
αλουµινίου που δεν εκτίθενται στην βροχή πρέπει να καθαρίζονται µε thoroughly, especially the corners and the bottom profile. In order to
µεγαλύτερη συχνότητα από τις εκτεθειµένες στην βροχή. Αν το νερό και protect and increase the life cycle of the ALUMinium, it may be treated
τα µαλακά απορρυπαντικά δεν επαρκούν για τον καλό καθαρισµό του with a very thin clear coat of water resistant film available from
αλουµινίου, υπάρχουν και ειδικά για το αλουµίνιο απορρυπαντικά. Αυτά ALUMIL.
τα απορρυπαντικά περιέχουν ελαφρώς λειαντικά ψήγµατα και µπορούν
να χρησιµοποιηθούν σε συνδυασµό µε ένα συνθετικό πανί καθαρισµού.
Σε όλες τις περιπτώσεις είναι πολύ σηµαντικό να ξεπλένονται καλά οι
επιφάνειες και να στεγνώνονται επιµελώς, ειδικά οι γωνίες και τα
προφίλ που έρχονται σε επαφή µε το έδαφος. Για την προστασία και την
επιµήκυνση του κύκλου ζωής του αλουµινίου, όλα τα προφίλ που
βάφονται στα βαφεία της ΑLUMIL υποβάλλονται σε βελτιωτική
επεξεργασία επιφάνειας SEASIDE CLASS, διαθέσιµο από την ALUMIL.
87
M8200
Χρήσιµα Ευρωπαϊκά πρότυπα και προδιαγραφές|Useful European standards and reference material
EN 10211 Θερµικές γέφυρες σε κτιριακές κατασκευές - Ροές θερµότητας και επιφανειακές θερµοκρασίες - Μέρος 1-2
Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO
10211:2007) Parts 1-2
EN 12020-1 Αλουµίνιο και κράµατα αλουµινίου - Διελασµένο προφίλ ακριβείας από κράµατα EN AW-6060 και EN AW-6063 - Μέρος
1: Τεχνικές συνθήκες για έλεγχο και παράδοση
ALUMinium and ALUMinium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1:
Technical conditions for inspection and delivery
EN 12020-2 Αλουµίνιο και κράµατα αλουµινίου - Διελασµένο προφίλ ακριβείας από κράµατα EN AW-6060 και EN AW-6063 - Μέρος
2: Ανοχές διαστάσεων και µορφή
ALUMinium and ALUMinium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2:
Tolerances on dimensions and form
EN 13049 Παράθυρα - Κρούση µε µαλακό και βαρύ σώµα - Μέθοδος δοκιµής, απαιτήσεις ασφαλείας και ταξινόµηση
Windows - Soft and heavy body impact - Test method, safety requirements and classification
Παράθυρα - Ταξινόµηση µηχανικών ιδιοτήτων - Φορτία που εξασκούνται κάθετα, κατά την στρέψη και κατά την
EN 13115 λειτουργία
Windows - Classification of mechanical properties - Racking, torsion and operating forces
EN 13141 Αερισµός κτιρίων - Δοκιµές επίδοσης συστατικών µερών / προϊόντων για αερισµό κατοικιών - Μέρος 1-8
Ventilation for buildings - Performance testing of components/products for residential ventilation Parts 1-8
88
M8200
Χρήσιµα Ευρωπαϊκά πρότυπα και προδιαγραφές|Useful European standards and reference material
EN 13123 Παράθυρα, πόρτες και εξώφυλλα - Αντίσταση στις εκρήξεις - Απαιτήσεις και ταξινόµηση - Μέρος 1-2
Windows, doors and shutters - Explosion resistance - Requirements and classification Parts 1-2
Παράθυρα, πόρτες και εξώφυλλα - Αντοχή σε εκρήξεις - Μέθοδοι δοκιµής - Μέρος 1-2
EN 13124 Windows, doors and shutters - Explosion resistance - Test method Parts 1-2
EN 13501 Ταξινόµηση δοµικών προϊόντων και στοιχείων σχετικά µε την φωτιά - Μέρος 1-5
Fire classification of construction products and building elements Parts 1-5
EN 13541 Ύαλος για δοµική χρήση - Υαλοστάσια ασφαλείας - Δοκιµές για ταξινόµηση της αντίστασης σε πίεση λόγω έκρηξης
Glass in building - Security glazing - Testing and classification of resistance against explosion pressure
EN 14351 Παράθυρα και πόρτες - Πρότυπο προϊόντος, χαρακτηριστικά επίδοσης - Μέρος 1: Παράθυρα και εξωτερικά συστήµατα
θυρών για πεζούς χωρίς χαρακτηριστικά πυραντίστασης ή/και διαρροής καπνού
Windows and doors - Product standard, performance characteristics
EN 14600 Συστήµατα θυρών και ανοιγόµενα παράθυρα µε χαρακτηριστικά πυραντίστασης ή/και ελέγχου καπνού - Απαιτήσεις και
ταξινόµηση
Doorsets and openable windows with fire resisting and/or smoke control characteristics - Requirements and
classification
89
M8200
Πνευµατικα Δικαιώµατα:
Πνευµατικα δικαιώµατα © ALUMIL A.E. Απαγορεύται η αναδηµοσίευση, ολική ή µερική αντιγραφή κειµένων, φωτογραφιώνκαι γενικότερα
πληροφοριών που περιέχονται στις σελίδες του εγχειριδίου και δεν αποτελούν αναδηµοσίευση από άλλες πηγές.
Όλα τα κείµενα, γραφικά, εικόνες που παρουσιάζονται σε οποιοδήποτε τµήµα του εγχειριδίου αποτελούν πνευµατική ιδιοκτησία του δηµιου-
ργού τους. Κάθε αναδηµοσίευση, η αναπαραγωγή, σε οποιοδήποτε µέσο, µετά ή άνευ επεξεργασίας, περιεχοµένων του εγχειριδίου χωρίς
προηγούµενη έγγραφη άδεια, δεν επιτρέπεται. Η µη επιτρεπτή χρήση του υλικού του εγχειριδίου σηµαίνει αυτόµατα καταλογισµό ευθυνών
σύµφωνα µε τον Ν. 2121/93 και τους κανόνες διεθνούς δικαίου που ισχύουν στην Ελλάδα.
Αποκήρυξη Ευθύνης:
Προσπαθούµε να κάνουµε αυτό το εγχειρίδιο και τα περιεχόµενα του αξιόπιστα, αλλά τυχόν ανακρίβειες µπορεί να προκύψουν. Η εταιρεία
δεν ευθύνεται για τυπογραφικά λάθη, παραλείψεις και ανακρίβειες σε αυτό το εγχειρίδιο. Οι πληροφορίες σε αυτό το εγχειρίδιο υπόκεινται
σε αλλαγή χωρίς προειδοποίηση.
Copyright Notice:
Copyright © 2012 ALUMil S.A. All rights reserved. None of the materials provided on this manual may be used, reproduced or transmitted, in whole or in
part, in any form or by any means, manual electronic or mechanical, including photocopying, recording or the use of any information storage and
retrieval system without permission in writing from the publisher.
Disclaimer of Liability:
In preparation of this manual, every effort has been made to offer the most current, correct, and clearly expressed information possible. Nevertheless,
inadvertent errors in information may occur. In particular but without limiting anything here, ALUMil S.A. disclaims any responsibility for typing errors
and inaccuracy of the information that may be contained in this manual. The information in this manual is subject to change without notice to the User.
ALUMil S.A. and its authorized agents and dealers make no warranties or representations whatsoever regarding the quality, content, completeness,
suitability, adequacy, sequence, accuracy, or expiration of information contained in this manual.
90
M8200
Notes - Σηµειώσεις
www.ALUMil.com
91
M8200
92