Professional Documents
Culture Documents
Raport
Raport
Raport
Packet Tracer - Add Computers to an Existing Network(6.1.2.1)
Disciplina: Structura și funcționarea calculatorului
Chisinau 2024
Packet Tracer - Add Computers to an Existing Network
Objectives
Configure the computers to use DHCP
Configure static addressing on the server
Use ipconfig to retrieve host IP information
Use ping to verify connectivity
Hint: To ensure that the instructions always remain visible during an activity, click the Top check box in the lower left-
hand corner of this instruction window.
Introduction
In this activity, you will investigate the topology, configure DHCP and static addressing, and use commands to verify
addressing and test connectivity.
Instructions
g.
e. Using the ping command, test connectivity between the PCs and the default gateway (BranchOffice
FastEthernet 0/0 interface IP address).
1) At the prompt for PC0, enter ping PC1’s IP address.
2) At the prompt for PC0, enter ping default gateway IP address.
g.
h.
Concluzie: