You are on page 1of 4

Ministry of High Education Course Name: Digital Signal

Al-Madina Higher Institute for Processing


Engineering and Technology Course Code: COMM 520

Sheet 6
1- Consider the following digital transfer function:

Plot the poles and zeros on the z-plane.

Solution

2- Given each of the following transfer functions that describe digital systems, sketch the
z-plane pole-zero plot and determine the stability for each digital system.
Ministry of High Education Course Name: Digital Signal
Al-Madina Higher Institute for Processing
Engineering and Technology Course Code: COMM 520

Solution
Ministry of High Education Course Name: Digital Signal
Al-Madina Higher Institute for Processing
Engineering and Technology Course Code: COMM 520

3- Given the digital system


a-
b-

c-

d-

e-

With a sampling rate of 8,000 Hz,

a- determine the frequency response;

b- calculate and plot the magnitude and phase frequency responses;

c- determine the filter type based the magnitude frequency response.

Solution

a- Taking the z-transform on both sides on the difference equation leads to

Then the transfer function describing the system is easily found to be


Ministry of High Education Course Name: Digital Signal
Al-Madina Higher Institute for Processing
Engineering and Technology Course Code: COMM 520

It is observed that when the frequency increases, the magnitude response decreases. The DSP
system acts like a digital low-pass filter, and its phase response is linear.

You might also like